Determination of carbaryl and its metabolite 1-naphthol in water samples by fluorescence spectrophotometer after anionic surfactant micelle-mediated extraction with sodium dodecylsulfate

A Simple and Reliable Dispersive Liquid-Liquid Microextraction with Smartphone-Based Digital Images for Determination of Carbaryl Residues in Andrographis paniculata Herbal Medicines Using Simple Peroxidase Extract from Senna siamea Lam. Bark

A simple and reliable dispersive liquid-liquid microextraction (DLLME) coupled with smartphone-based digital images using crude peroxidase extracts from cassia bark (Senna siamea Lam.) was proposed to determine carbaryl residues in Andrographis paniculata herbal medicines. The method was based on the reaction of 1-naphthol (hydrolysis of carbaryl) with 4-aminoantipyrine (4-AP) in the presence of hydrogen peroxide, using peroxidase enzyme simple extracts from cassia bark as biocatalysts under pH 6.0. The red product, after preconcentration by DLLME using dichloromethane as extraction solvent, was measured for blue intensity by daily life smartphone-based digital image analysis. Under optimized conditions, good linearity of the calibration graph was found at 0.10–0.50 mg·L⁻¹ (r² = 0.9932). Limits of detection (LOD) (3SD/slope) and quantification (LOQ) (10SD/slope) were 0.03 and 0.09 mg·L⁻¹, respectively, with a precision of less than 5%. Accuracy of the proposed method as percentage recovery gave satisfactory results. The proposed method was successfully applied to analyze carbaryl in Andrographis paniculata herbal medicines. Results agreed well with values obtained from the HPLC-UV method at 95% confidence level. This was simple, convenient, reliable, cost-effective and traceable as an alternative method for the determination of carbaryl.

Quantitative analysis of carbaryl and thiabendazole in complex matrices using excitation-emission fluorescence matrices with second-order calibration methods

In this paper, a fast and efficient analytical strategy was proposed that chemometrics assisted with excitation-emission fluorescence matrices was used to quantify carbaryl (CAR) and thiabendazole (TBZ) in peach, soil and sewage. Even if there are serious overlapped peaks and unknown interferences in fluorescence analysis, the second-order calibration method based on alternating trilinear decomposition (ATLD) algorithm can be used to analyze CAR and TBZ in peach, soil and sewage. The recoveries of CAR and TBZ in peach are 110.4% and 99.7% and their standard deviations are lower than 2.1% and 0.3%, respectively. In addition, the accuracy of the method was assessed with figures of merit as well as intra-day and inter-day precision. The limit of detection, the limit of quantitation of CAR and TBZ in peach are 1.2 ng mL^-1 and 0.3 ng mL^-1, 3.5 ng mL^-1 and 0.8 ng mL^-1, respectively. And their root-mean-square error of prediction are 17.0 ng mL^-1 and 5.0 ng mL^-1 and there are high sensitivity and selectivity in this method. Meanwhile, the results obtained by ATLD algorithm were compared with those obtained by the self-weighted alternate trilinear decomposition algorithm (SWATLD) and the parallel factor analysis (PARAFAC) algorithm, and statistical methods such as the t-test, F-test and the elliptic joint confidence region were used to evaluate for analysis. There were no significant differences among these methods. At last, high performance liquid chromatography-fluorescence detector (HPLC-FLD) was used to evaluate the accuracy and reliability of the proposed method. These results are satisfactory and indicate that the proposed method can be used for accurate and rapid determination of pesticides in complex systems.

Electrochemical sensing platform for naphthol isomers based on in situ growth of ZIF-8 on reduced graphene oxide by a reaction-diffusion technique

Enhancing the dispersibility and conductivity is an effective solution to develop the application zeolitic imidazole frameworks (ZIF) in the electrochemical field. This work thus employs a novel reaction-diffusion framework (RDF) technique for the in situ growth of ZIF-8 crystals on graphene oxide (GO@ZIF-8) matrixes. In detail, the outer electrolyte of 2-methyl imidazole naturally diffuses into the inner agar gel matrix containing Zn²⁺ cations and GO nanosheets. The long reaction-diffusion makes the growth of ZIF-8 crystals controllable in a vertical gradient. After thermal treatment, the title product of ZIF-8 in situ grown on reduced graphene oxide (rGO@ZIF-8) is obtained and thus exhibits good dispersibility, high conductivity, large surface area, and more catalytic sites. The glassy carbon electrode (GCE) was modified by casting the rGO@ZIF-8 suspension. The obtained rGO@ZIF-8/GCE displays excellent catalytic activity toward naphthol (NAP) isomers. Under the optimal conditions, the amperometric currents of 1-NAP and 2-NAP demonstrate the good linear relationship in wide ranges of 0.05-12 μM and 0.02-15 μM, respectively. Their limits of detection are as low as 15 and 17 nM, respectively. The fabricated modified electrode exhibits excellent selectivity, stability, and reproducibility. The sensor is also utilized to detect NAP molecules in real water samples and indicates good accuracy and reliability.

N-doped mesoporous carbon as a new sorbent for ultrasonic-assisted dispersive micro-solid-phase extraction of 1-naphthol and 2-naphthol, the biomarkers of exposure to naphthalene, from urine samples

This study aimed to optimize a new sample preparation method using N-doped mesoporous carbon sorbent for simultaneous measurement of 1-naphthol and 2-naphthol, the biomarkers of exposure to naphthalene. The samples were analyzed using high-performance liquid chromatography supplied with ultraviolet detector (HPLC-UV). N-doped mesoporous carbon sorbent was obtained via the hard template procedure. The synthesized nanosorbent was then characterized by transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), and elemental analysis (CHN). The effective factors in the extraction of the studied biomarkers were examined by the Box-Behnken (BBD) methodology. Regarding the optimum conditions, the sketched calibration curve for naphthols was linear in the concentration levels of 1-600 µg L^-1 for human urine samples. The accuracy and reproducibility of the introduced method were determined using the relative recovery (RR %) and relative standard deviation (RSD %) tests on the fortified urine samples. RR% and RSD% were found to be 97.0-101.2% and 3.1-9.0%, respectively. The calculated method detection limit of the optimized procedure was 0.3 µg L^-1 and 0.5 µg L^-1 for 1-naphthol and 2-naphthol, respectively.

Green approach for simultaneous determination of multi-pesticide residue in environmental water samples using excitation-emission matrix fluorescence and multivariate calibration

Pesticides are among the most widespread organic contaminants in aquatic environments. In this work, a new green fluorescence application was proposed for the simultaneous determination of four widely employed pesticides in environmental water samples. To overcome the highly overlapped spectra within the analytes, and with the tissue matrix interferences in complex solutions, we have used the multivariate calibration methods such as parallel factor analysis (PARAFAC) and unfolded partial least squares coupled to residual bilinearization (U-PLS/RBL). These four pesticides can be identified simultaneously, and the correlation coefficients between resolved and actual spectra are all above 0.95. The second-order advantage allowed the determination of four pesticides at the ng mL^-1 level, even in the presence of humic acid (HA). The best results were obtained with the limits of detection of 1.72-18.69 for Carbendazim (CBZ), 0.30-5.19 for carbaryl (CAR), 0.35-6.32 for chlorothalonil (CHL), and 4.92-29.96 for tsumacide (TSU) (ng mL^-1), which can fully meet the quantitative detection and analysis requirements of trace pesticides in water samples. The real water sample of Bohai Seawater was used to check the performance of this approach in practical applications, which have achieved good prediction results of U-PLS/RBL. This study demonstrated the proposed method is rapid, accurate, sensitive, low detection limit, and environmentally friendly to determinate multi-pesticide residues in environmental water samples.

Application of Micellar Extraction for Isolation of Famotidine from Aqueous Samples Prior to its Chromatographic Determination

Micellar extraction was applied to isolate famotidine from aqueous samples. This drug is an H₂ receptor antagonist used for the treatment of stomach diseases. The process was performed with a mixture of anionic sodium dodecylsulfate and nonionic Triton X-114 surfactants. The effect of different parameters on the efficiency of the micellar extraction such as electrolyte and surfactant concentration, pH of sample, temperature, shaking and centrifugation time was investigated. The influence of foreign substances on a studied process was tested. The elaborated procedure was applied for HPLC–UV determination of famotidine in natural water samples. The calibration graph was recorded in the range 1.35–37.12 μg mL⁻¹ of the studied compound. The repeatability of the method was equal to 7.4%. The limit of detection and quantification values for the determination of famotidine by using the proposed method amounted to 0.40 and 1.25 μg mL⁻¹, respectively.

Ordered Mesoporous NiCo2O4 Nanospheres as a Novel Electrocatalyst Platform for 1-Naphthol and 2-Naphthol Individual Sensing Application

The novel ordered mesoporous NiCo₂O₄ (meso-NiCo₂O₄) nanospheres were synthesized by the nanocasting strategy followed by a calcination process for 2-naphthol (2-NAP) and 1-naphthol (1-NAP) individual sensing application. The as-obtained meso-NiCo₂O₄ material possesses mesoporous structure in spinel crystalline type with a larger specific surface area than other structures. The meso-NiCo₂O₄-modified carbon paste electrode exhibited excellent electrocatalytic performance for NAP detection by amperometry measurement. The fabricated sensor of 2-NAP and 1-NAP has a wide linear detection range (0.02-300 and 0.02-20 μM) with high sensitivity (1.822 and 1.510 μA μM^-1 cm^-2) and low limit of detection (0.007 and 0.007 μM), respectively. In addition, the NAP sensors possess excellent reproducibility, stability, and selectivity.

Development of supramolecular solvent based microextraction prior to high performance liquid chromatography for simultaneous determination of phenols in environmental water

SUPRAS based microextraction for phenols.

Solid-Phase Spectrophotometric Analysis of 1-Naphthol Using Silica Functionalized with m-Diazophenylarsonic Acid

The m-aminophenylarsonic acid (m-APAA) was immobilized onto the silica gel surface with covalently grafted quaternary ammonium groups via ion exchange. The diazotization of ion-bonded m-APAA resulted in a new solid-phase spectrophotometric reagent for detection of 1-naphtol in environmental water samples. The procedure of solid-phase spectrophotometric analysis is characterized by 20 μg L(-1) limit of detection (LOD) of 1-naphtol, up to 2000 concentration factor, and insensitivity to the presence of natural water components as well as to 30-fold excess of phenol, resorcinol, and catechol.

A new supramolecular based liquid solid microextraction method for preconcentration and determination of trace bismuth in human blood serum and hair samples by electrothermal atomic absorption spectrometry

A simple and reliable supramolecule-aggregated liquid solid microextraction method is described for preconcentration and determination of trace amounts of bismuth in water as well as human blood serum and hair samples. Catanionic microstructures of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) surfactants, dissolved in deionized water/propanol, are used as a green solvent to extract bismuth (III)-diethyldithiocarbamate complexes by dispersive microextraction methodology. The extracted solid phase is easily removed and dissolved in 50 μL propanol for subsequent measurement by electrothermal atomic absorption spectrometry (ET-AAS). The procedure benefits the merits of supramolecule aggregates' properties and dispersive microextraction technique using water as the main component of disperser solvent, leading to direct interaction with analyte. Phase separation behavior of extraction solvent and different parameters influencing the extraction efficiency of bismuth ion such as salt concentration, pH, centrifugation time, amount of chelating agent, SDS:CTAB mole ratio, and solvent amounts were thoroughly optimized. Under the optimal experimental conditions, the calibration curve was linear in the range of 0.3-6 μg L^-1 Bi (III) with a limit of detection (LOD) of 0.16 μg L^-1 (S/N = 3). The relative standard deviations (RSD) of determination were obtained to be 5.1 and 6.2 % for 1 and 3 μg L^-1 of Bi (III), respectively. The developed method was successfully applied as a sensitive and accurate technique for determination of bismuth ion in human blood serum, hair samples, and a certified reference material.

A novel supramolecular aggregated liquid–solid microextraction method for the preconcentration and determination of trace amounts of lead in saline solutions and food samples using electrothermal atomic absorption spectrometry

A novel supramolecular aggregated liquid–solid microextraction method was developed for the preconcentration and determination of trace amounts of lead in saline solutions and food samples.

Identification and quantification of known polycyclic aromatic hydrocarbons and pesticides in complex mixtures using fluorescence excitation-emission matrices and parallel factor analysis

Polycyclic aromatic hydrocarbons (PAHs) and pesticides are among the most widespread organic contaminants in aquatic environments. Because of their aromatic structure, PAHs and pesticides have intrinsic fluorescence properties in the ultraviolet/blue spectral range. In this study, excitation-emission matrix (EEM) fluorescence spectroscopy and parallel factor (PARAFAC) analysis were used to characterise and discriminate fluorescence signatures of nine PAHs and three pesticides at the μg L(-1) level in the presence of humic substances (0.1-10 mgCL(-1)). These contaminants displayed a diversity of fluorescence signatures regarding spectral position (λEx: 220-335 nm, λEm: 310-414 nm), Stokes shift (39-169 nm) and number of peaks (1-8), with detection limits ranging from 0.02 to 1.29μgL(-1). The EEM/PARAFAC method applied to mixtures of PAHs with humic substances validated a seven-component model that included one humic-like fluorophore and six PAH-like fluorophores. The EEM/PARAFAC method applied to mixtures of pesticides with humic substances validated a six-component model that included one humic-like fluorophore and three pesticide-like fluorophores. The EEM/PARAFAC method adequately quantified most of the contaminants for humic substance concentrations not exceeding 2.5 mg CL(-1). The application of this method to natural (marine) samples was demonstrated through (1) the match between the Ex and Em spectra of PARAFAC components and the Ex and Em spectra of standard PAHs, and (2) the good linear correlations between the fluorescence intensities of PARAFAC components and the PAH concentrations determined by GC-MS.

Highly sensitive detection of α-naphthol based on G-DNA modified gold electrode by electrochemical impedance spectroscopy

A highly sensitive, reusable G-rich DNA sensor was reported for the detection of α-naphthol by electrochemical impedance spectroscopy (EIS). Specifically, a single-stranded G-rich DNA was self-assembled on the electrode and transformed into K(+)-stabilized G-quadruplex, which could catalyze H2O2-mediated oxidation of α-naphthol (with hemin as a cofactor) to 1, 4-naphthoquinone precipitated on the DNA films. Due to the insolubility of 1, 4-naphthoquinone, the charge transfer resistance (RCT) was increased to maximum within 15 min. Depending on the difference in charge transfer resistance change (ΔRCT), the α-naphthol could be detected with the detection limit of 0.1 nM in Tris-ClO4 buffer solution (20mM, pH=7.4). Moreover, the sensor demonstrated a high selectivity over other selected phenolic compounds. The performance of the sensor in the real lake water was also explored with the detection limit of 0.8 nM. Finally, the regeneration of the sensor was investigated, which allowed for reuse more than 4 cycles with a mean recovery of 94% of the original signal.

Application of chemometrics methods for the simultaneous kinetic spectrophotometric determination of aminocarb and carbaryl in vegetable and water samples

A procedure for the simultaneous kinetic spectrophotometric determination of aminocarb and carbaryl in vegetable and water samples was described. The method was based on the differential oxidation rate of aminocarb and carbaryl when they were reacted with the oxidant, potassium ferricyanide (K(3)Fe(CN)(6)), in an appropriate alkaline medium. Both species were instantly oxidized, and resulted in a decrease of ferricyanide concentration. This anion has a maximum spectral absorbance at about 420 nm. Under the optimum experimental conditions, the linear ranges were 0.05-0.6 mg L(-1) and 0.1-1.2 mg L(-1) for aminocarb and carbaryl, respectively. The kinetic data collected were processed by chemometrics methods, such as classical least squares (CLS), partial least squares (PLS), principal components regression (PCR), back propagation-artificial neural network (BP-ANN), radial basis function-artificial neural network (RBF-ANN), and principal component-radial basis function-artificial neural network (PC-RBF-ANN). These methods were applied for the prediction of the two carbamate pesticides. The results showed that the PLS and PC-RBF-ANN calibration models gave the lowest prediction errors. The proposed method was successfully applied to the simultaneous determination of aminocarb and carbaryl in vegetable and water samples, and satisfactory results were obtained.