Design of an optical sensor for indirect determination of isoniazid

Optical chemical sensor of Gd(iii) based on 5-(2′-bromophenyl- azo)-6-hydroxypyrimidine-2,4-dione immobilized on poly(methyl methacrylate) and 2-nitrophenyloctylether matrix

A novel optical chemical sensor (optode) was fabricated for the determination of Gadolinium ions. The optical sensor was prepared by incorporating a recently synthesized ionophore, 5-(2′-bromophenylazo)-6-hydroxy pyrimidine-2,4-dione (BPAHPD), and 2-nitrophenyloctylether (NPOE) as a plasticizer in poly(methyl methacrylate) (PMMA) membrane. The color of the sensing membrane in contact with Gd(iii) ions changed from yellow to red-orange due to the adsorption of Gd(iii) with the maximum absorbance (λ_max) at 563 nm. The chemical sensor responds optimally towards Gd(iii) ions at the optimum conditions of pH 7.5, contact time 10 min, 150 ng mL⁻¹ Gd(iii), and 5.0 mL solution. The linear regression equation achieved was A = 4.36C (μg mL⁻¹) – 0.15 (r = 0.9976). A linear Gd(iii) calibration curve can be established in the concentration range of 5.0–250 ng mL⁻¹ with R² = 0.9976. Detection and quantification limits are 1.47 and 4.75 ng mL⁻¹, respectively. The molar absorptivity and Sandell sensitivity are found to be 6.86 × 10⁷ L mol⁻¹ cm⁻¹ and 0.023 ng cm⁻², respectively. In addition to its stability and reproducibility, the optode revealed a great selectivity toward Gd(iii) ions as compared to other coexisting ions in real samples. The recovery of Gd(iii) ions from the sensor material was achieved using 0.4 M HNO₃^. The offered optode sensor membrane has been employed to monitor Gd(iii) in soil, sediments, river water, and urine with an internal standard addition method and compared statistically with the ICP-OES method. The results revealed calculated t-values between 1.11–1.85, whereas F values were in the range of 2.46–3.77 which did not exceed the theoretical values, indicating no significant difference at 95% confidence level. The observed percent recovery is in the range of 97.24–102.52%.

A novel optical chemical sensor (optode) was fabricated for the determination of Gadolinium ions.

Electroanalysis of isoniazid and rifampicin: Role of nanomaterial electrode modifiers

Thanks to operational simplicity, speediness, possibility of miniaturization and real-time nature, electrochemical sensing is a supreme alternative for non-electrochemical methodologies in drug quantification. This review, highlights different nanotech-based sensory designs for electroanalysis of isoniazid and rifampicin, the most important medicines for patients with tuberculosis. We first, concisely mention analyses with bare electrodes, associated impediments and inspected possible strategies and then critically review the last two decades works with focus on different nano-scaled electrode modifiers. We organized and described the materials engaged in several categories: Surfactants modifiers, polymeric modifiers, metallic nanomaterials, carbon based nano-modifiers (reduced graphene oxide, multi-walled carbon nanotubes, ordered mesoporous carbon) and a large class of multifarious nano composites-based sensors and biosensors. The main drawbacks and superiorities associated with each array as well as the current trend in the areas is attempted to discuss. Summary of 79 employed electrochemical approaches for analysis of isoniazid and rifampicin has also been presented.

A sensitive plasmonic probe based on in situ growth of a Ag shell on a Au@N-CD nanocomposite for detection of isoniazid in environmental and biological samples

In this study, a new plasmonic probe based on the wavelength shift of the surface plasmon resonance band of a Au@N-CD nanocomposite was introduced for the determination of isoniazid.

Kinetics and mechanism of oxidation of the anti-tubercular prodrug isoniazid and its analog by iridium(iv) as models for biological redox systems

A complex reaction mechanism of oxidation of the anti-tubercular prodrug isoniazid (isonicotinic hydrazide, INH) by [IrCl₆]^2- as a model for redox processes of such drugs in biological systems has been studied in aqueous solution as a function of pH between 0 and 8.5. Similar experiments have been performed with its isomer nicotinic hydrazide (NH). All reactions are overall second-order, first-order in [IrCl₆]^2- and hydrazide, and the observed second-order rate constants k' have been determined as a function of pH. Spectrophotometric titrations indicate a stoichiometry of [Ir(iv)] : [hydrazide] = 4 : 1. HPLC analysis shows that the oxidation product of INH is isonicotinic acid. The derived reaction mechanism, based on rate law, time-resolved spectra and stoichiometry, involves parallel attacks by [IrCl₆]^2- on all four protolytic species of INH and NH as rate-determining steps, depending on pH. These steps are proposed to generate two types of hydrazyl free radicals. These radicals react further in three rapid consecutive processes, leading to the final oxidation products. Rate constants for the rate-determining steps have been determined for all protolytic species I-IV of INH and NH. They are used to calculate reactivity-pH diagrams. These diagrams demonstrate that for both systems, species IV is ca. 10⁵ times more reactive in the redox process than the predominant species III at the physiological pH of 7.4. Thus, species IV will be the main reactant, in spite of the fact that its concentration at this pH is extremely low, a fact that has not been considered in previous work. The results indicate that pH changes might be an important factor in the activation process of INH in biological systems also, and that in such systems this process most likely is more complicated than previously assumed.

Potassium permanganate-acridine yellow chemiluminescence system for the determination of fluvoxamine, isoniazid and ceftriaxone

Based on the oxidation of acridine yellow by permanganate in basic medium, a new chemiluminescence system was developed for the sensitive determination of some important drugs. The remarkable inhibiting effect of fluvoxamine, ceftriaxone and isoniazid on this reaction was applied to their detection. A possible mechanism was proposed for this system based on chemiluminescence emission wavelengths and experimental observations. Under optimum conditions, calibration graphs were obtained for 1 × 10(-9) to 1 × 10(-6) mol/L of fluvoxamine; 2 × 10(-8) to 8 × 10(-6) mol/L of ceftriaxone and 5 × 10(-8) to 4 × 10(-5) mol/L of isoniazid. This proposed method was satisfactorily used in the determination of these drugs in pharmaceutical samples and human urine and serum.

Design of a novel optical sensor for determination of trace gadolinium

In this work, a highly selective and sensitive gadolinium (Gd) optical sensor based on immobilization of bis(thiophenal) pyridine-2,6-diamine (BPD), on a triacetylcellulose membrane has been reported. This optode exhibits a linear range of the Gd(III) ion concentration of 2.5 x 10(-6)M with a detection limit of 0.93 x 10(-8) M. Response time of the newly designed optode was within 1-2 min, depending on the Gd(III) ion concentration. Response of the sensor is independent of solution pH in the range of 2.0-9.0. It manifests advantages of: low detection limit, fast response time, and most significantly, very good selectivity with respect to a number of lanthanide ions (La, Ce, Sm, Tm, Ho, and Eu ions). The sensor was successfully regenerated with thiourea solutions and its response was reversible and reproducible (R.S.D. less than 1.4%). This optode was applied to determine Gd(III) in synthetic and water samples, and validated with certified reference materials (CRMs).