Determination of origin and sugars of citrus fruits using genetic algorithm, correspondence analysis and partial least square combined with fiber optic NIR spectroscopy

Analysis of the Pomelo Peel Essential Oils at Different Storage Durations Using a Visible and Near-Infrared Spectroscopic on Intact Fruit

Pomelo fruit pulp mainly is consumed fresh and with very little processing, and its peels are discarded as biological waste, which can cause the environmental problems. The peels contain several bioactive chemical compounds, especially essential oils (EOs). The content of a specific EO is important for the extraction process in industry and in research units such as breeding research. The explanation of the biosynthesis pathway for EO generation and change was included. The chemical bond vibration affected the prediction of EO constituents was comprehensively explained by regression coefficient plots and x-loading plots. Visible and near-infrared spectroscopy (VIS/NIRS) is a prominent rapid technique used for fruit quality assessment. This research work was focused on evaluating the use of VIS/NIRS to predict the composition of EOs found in the peel of the pomelo fruit (Citrus maxima (J. Burm.) Merr. cv Kao Nam Pueng) following storage. The composition of the peel oil was analyzed by gas chromatography-mass spectrometry (GC-MS) at storage durations of 0, 15, 30, 45, 60, 75, 90, 105 and 120 days (at 10 °C and 70% relative humidity). The relationship between the NIR spectral data and the major EO components found in the peel, including nootkatone, geranial, β-phellandrene and limonene, were established using the raw spectral data in conjunction with partial least squares (PLS) regression. Preprocessing of the raw spectra was performed using multiplicative scatter correction (MSC) or second derivative preprocessing. The PLS model of nootkatone with full MSC had the highest correlation coefficient between the predicted and reference values (r = 0.82), with a standard error of prediction (SEP) of 0.11% and bias of 0.01%, while the models of geranial, β-phellandrene and limonene provided too low r values of 0.75, 0.75 and 0.67, respectively. The nootkatone model is only appropriate for use in screening and some other approximate calibrations, though this is the first report of the use of NIR spectroscopy on intact fruit measurement for its peel EO constituents during cold storage.

Fast detection of moisture content and freshness for loquats using optical fiber spectroscopy

Detection of the moisture content (MC) and freshness for loquats is crucial for achieving optimal taste and economic efficiency. Traditional methods for evaluating the MC and freshness of loquats have disadvantages such as destructive sampling and time-consuming. To investigate the feasibility of rapid and non-destructive detection of the MC and freshness for loquats, optical fiber spectroscopy in the range of 200-1000 nm was used in this study. The full spectra were pre-processed using standard normal variate method, and then, the effective wavelengths were selected using competitive adaptive weighting sampling (CARS) and random frog algorithms. Based on the selected effective wavelengths, prediction models for MC were developed using partial least squares regression (PLSR), multiple linear regression, extreme learning machine, and back-propagation neural network. Furthermore, freshness level discrimination models were established using simplified k nearest neighbor, support vector machine (SVM), and partial least squares discriminant analysis. Regarding the prediction models, the CARS-PLSR model performed relatively better than the other models for predicting the MC, with R 2 P and RPD values of 0.84 and 2.51, respectively. Additionally, the CARS-SVM model obtained superior discrimination performance, with 100% accuracy for both calibration and prediction sets. The results demonstrated that optical fiber spectroscopy technology is an effective tool to fast detect the MC and freshness for loquats.

Detection and analysis of hyaluronic acid raw materials from different sources by NIR and aquaphotomics

Hyaluronic acid (HA), a polysaccharide, is widely used for its essential physiological functions. Although the structures of low molecular weight HA produced by both acid and enzyme degradation methods are extremely similar, there are still differences due to the different degradation principles. There is currently no clear way to distinguish between HA prepared by acidolysis and enzymatic hydrolysis. Based on near-infrared (NIR) spectroscopy and aquaphotomics technology, a method for distinguishing HA raw materials and their mixtures from different sources was proposed, and HA with different mixed ratios was accurately quantified. First, NIR spectra of the HA samples were collected. The spectra were then preprocessed to improve the spectral resolution. Spectral information was extracted based on wavelet transform and principal component analysis, resulting in a final selection of 12 characteristic wavelengths containing classification information. The discriminative and quantitative models were then constructed using the 12 wavelengths. The discriminative model achieved a 100% identification rate for HA from different sources. The correlation coefficient of calibration (Rc), validation (Rp), external test (Rt), root mean square error of cross validation (RMSECV), calibration (RMSEC), validation (RMSEP), and external test (RMSET) of the mixed proportion quantitative model were 0.9876, 0.9876, 0.9898, 0.0546, 0.0433, 0.0440, and 0.0347, respectively. In this study, the problem of structural similarity and non-identifiability of HA produced by acidolysis and enzymatic hydrolysis was addressed, and quality monitoring of HA feedstock in HA circulating links was achieved. This is the first time to achieve accurate quantification of solid mixtures using the aquaphotomics method.

Towards sweetness classification of orange cultivars using short-wave NIR spectroscopy

The global orange industry constantly faces new technical challenges to meet consumer demands for quality fruits. Instead of traditional subjective fruit quality assessment methods, the interest in the horticulture industry has increased in objective, quantitative, and non-destructive assessment methods. Oranges have a thick peel which makes their non-destructive quality assessment challenging. This paper evaluates the potential of short-wave NIR spectroscopy and direct sweetness classification approach for Pakistani cultivars of orange, i.e., Red-Blood, Mosambi, and Succari. The correlation between quality indices, i.e., Brix, titratable acidity (TA), Brix: TA and BrimA (Brix minus acids), sensory assessment of the fruit, and short-wave NIR spectra, is analysed. Mix cultivar oranges are classified as sweet, mixed, and acidic based on short-wave NIR spectra. Short-wave NIR spectral data were obtained using the industry standard F-750 fruit quality meter (310-1100 nm). Reference Brix and TA measurements were taken using standard destructive testing methods. Reference taste labels i.e., sweet, mix, and acidic, were acquired through sensory evaluation of samples. For indirect fruit classification, partial least squares regression models were developed for Brix, TA, Brix: TA, and BrimA estimation with a correlation coefficient of 0.57, 0.73, 0.66, and 0.55, respectively, on independent test data. The ensemble classifier achieved 81.03% accuracy for three classes (sweet, mixed, and acidic) classification on independent test data for direct fruit classification. A good correlation between NIR spectra and sensory assessment is observed as compared to quality indices. A direct classification approach is more suitable for a machine-learning-based orange sweetness classification using NIR spectroscopy than the estimation of quality indices.

Comparison and Characterization of the Structure and Physicochemical Properties of Three Citrus Fibers: Effect of Ball Milling Treatment

Effects of ball milling (BM) on the structure and physicochemical properties of three types of citrus fibers were investigated. With the extension of the grinding time, the particle size of citrus fibers significantly decreased. Fourier transform infrared spectroscopy (FTIR) showed that the three citrus fibers had similar chemical groups, and more -OH and phenolic acid groups were exposed after BM, and pectin and lignin were not degraded. Scanning electron microscope (SEM) results showed that the appearance of particles changed from spherical to fragmented, irregular shapes. The water holding capacity (WHC), oil holding capacity (OHC), and water swelling capacity (WSC) of citrus fibers LM, JK, and FS reached the maximum value after BM of 2 h (increasing by 18.5%), 4 h (increasing by 46.1%), and 10 h (increasing by 38.3%), respectively. After 10 h BM, citrus fibers FS and JK had the highest adsorption capacity of cholesterol and sodium cholate, increasing by 48.3% and 48.6%, respectively. This indicates that BM transforms the spatial structure of citrus fibers and improves their physicochemical properties.

Estimating canopy nitrogen concentration of sugarcane crop using in situ spectroscopy

Estimating nitrogen (N) concentration in situ is fundamental for managing the fertilization of the sugarcane crop. The purpose of this work was to develop estimation models that explain how N varies over time as a function of three spectral data transformations in two stages (plant cane and first ratoon) under variable rates of N application. A randomized complete-block experimental design was applied, with four levels of N fertilization: 0, 80, 160, and 240 kg N ha⁻¹. Six sampling events were carried out during the rapid growth stage, where the canopy reflectance spectra with a hyperspectral sensor were measured, and tissue samples for N determination in plant cane and first ratoon were taken, from 60 days after emergence (DAE) and 60 days after harvest (DAH), respectively, until days 210 DAE and 210 DAH. To build the models, partial least squares regression analysis was used and was trained by three transformations of the spectral data: (i) average reflectance spectrum (R), (ii) multiple scatter correction and Savitzky-Golay filter MSC-SG) reflectance spectrum, and (iii) calculated vegetation indices (VIs).

Non-Destructive Measurement of the Internal Quality of Citrus Fruits Using a Portable NIR Device

The citrus industry has grown exponentially as a result of increasing demand on its consumption, giving it high standing among other fruit crops. Therefore, the citrus sector seeks rapid, easy, and non-destructive approaches to evaluate in real time and in situ the external and internal changes in physical and nutritional quality at any stage of fruit development or storage. In particular, vitamin C is among the most important micronutrients for consumers, but its measurement relies on laborious analytical methodologies. In this study, a portable near infrared spectroscopy (NIRS) sensor was used in combination with chemometrics to develop robust and accurate models to study the ripeness of several citrus fruits (oranges, lemons, clementines, tangerines, and Tahiti limes) and their vitamin C content. Ascorbic acid, dehydroascorbic acid, and total vitamin C were determined by HILIC-HPLC-UV, while soluble solids and total acidity were evaluated by standard analytical procedures. Partial least squares regression (PLSR) was used to build regression models which revealed suitable performance regarding the prediction of quality and ripeness parameters in all tested fruits. Models for ascorbic acid, dehydroascorbic acid, total vitamin C, soluble solids, total acidity, and juiciness showed Rcv2 = 0.77-0.87, Rcv2 = 0.29-0.79, Rcv2 = 0.77-0.86, Rcv2 = 0.75-0.97, Rcv2 = 0.24-0.92, and Rcv2 = 0.38-0.75, respectively. Prediction models of oranges and Tahiti limes showed good to excellent performance regarding all tested conditions. The resulting models confirmed that NIRS technology is a time- and cost-effective approach for predicting citrus fruit quality, which can easily be used by the various stakeholders from the citrus industry.

Prediction the contents of fructose, glucose, sucrose, fructo-oligosaccharides and iridoid glycosides in Morinda officinalis radix using near-infrared spectroscopy

Morindae officinalis radix (MOR) is a famous Chinese herbal medicine which has long history of use in medicine and food. MOR and MOR with steaming process (PMOR) are the most commonly used forms in in clinical and health care. In order to establish a fast and mostly nondestructive quality control method for MOR, 183 beaches of MOR samples and 20 beaches of PMOR samples were collected commercially from major producing areas in Guangdong, Fujian and Guangxi Provinces of China. To predict main components of MOR, a calibration model was established based on near-infrared spectroscopy with partial least square regression. The model was optimized by compared the parameters of root mean square error of prediction (RMSEP), root mean square error of cross validation (RMSECV), coefficient of correlation (R²) and ratio of performance to deviation (RPD). Comparative studies were performed to evaluate the performance of models by different spectra preprocessing methods and different data set. The results showed that the model performance was improved with standard normal variate spectra preprocessing methods and when the data set contained both MOR and PMOR samples. A few PMOR samples were added to MOR samples data set the model predictive performance could be improved. The contents of 14 components were predicted in MOR with lower RMSEP and RMSECV, and higher R² and RPD, including fructose (12.8 mg/g, 16.3 mg/g, 0.9873, 10.10), glucose (7.28 mg/g, 8.73 mg/g, 0.9611, 6.21 sucrose (9.24 mg/g, 9.10 mg/g, 0.8419, 1.75), GF2(9.42 mg/g, 11.3 mg/g, 0.8526, 2.03), GF3(7.98 mg/g, 9.20 mg/g, 0.8756, 2.74), GF4(6.81 mg/g, 8.93 mg/g, 0.8663, 3.06), GF5(8.13 mg/g, 8.85 mg/g, 0.9001, 3.06), GF6(6.40 mg/g, 6.95 mg/g, 0.9145, 3.27), GF7(5.53 mg/g, 6.15 mg/g, 0.9195, 3.57), GF8(5.40 mg/g, 6.02 mg/g, 0.9179, 3.31), GF9(3.00 mg/g,4.35 mg/g,0.9446, 5.03),GF10(4.08 mg/g, 5.34 mg/g, 0.8983, 3.62), GF11(8.97 mg/g, 7.70 mg/g, 0.8683, 2.01) and iridoid glycosides (4.12 mg/g, 5.51 mg/g, 0.8712, 2.43). The model established in this paper could predict 14 components of MOR. The results would provide a reference method for the quality control of Chinese medical materials and their process products.

Optimizing genetic algorithm-partial least squares model of soluble solids content in Fukumoto navel orange based on visible-near-infrared transmittance spectroscopy using discrete wavelet transform

BACKGROUND

The thick rind of Fukumoto navel orange is a great barrier to light penetration, which makes it difficult to evaluate the internal quality of Fukumoto navel orange accurately by visible-near-infrared (Vis-NIR) transmittance spectroscopy. The information carried by the transmission spectrum is limited. Thus, the application of genetic algorithm (GA) for variable selection may not reach the expected results, and selected variables may contain redundancy. In this paper, we present the use of discrete wavelet transforms for optimizing a GA-partial least squares (PLS) model based on Vis-NIR transmission spectra of Fukumoto navel orange. Haar, Db, Sym, Coif and Bior wavelets were used to compress the spectral data selected by GA. Then a PLS model was established based on the variables compressed by each wavelet function.

RESULTS

The use of Db4, Sym4, Coif2 and Bior3.5 succeeded in further simplification of the GA-PLS model by reducing the number of variables by 40-44% without decreasing the prediction accuracy. The application of Bior3.5 not only could reduce the number of variables in the GA-PLS model by 40%, but also increase the value of correlation coefficient of prediction by 1% and decrease the value of root mean square error of prediction by 3%.

CONCLUSIONS

The results indicated that the combination of GA and discrete wavelet transforms for variable selection in the internal quality assessment of Fukumoto navel orange by Vis-NIR transmittance spectroscopy was feasible. © 2019 Society of Chemical Industry.

A new strategy of applying modeling indicator determined method to high-level fusion for quantitative analysis

A novel method, named as modeling indicator determined (MID) method, based on two model evaluation parameters i.e., root mean square error of prediction (RMSEP) and ratio performance deviation (RPD), is proposed to employ high-level fusion for quantitative analysis. The two MID methods of root mean square error of prediction weighted (RMSEPW) method and ratio performance deviation weighted (RPDW) method are put forward on the basis of the model evaluation indicators from the individual models. Performance of RMSEPW method and RPDW method are evaluated in terms of the predictive ability of root mean square error of prediction for fusion (RMSEP_f) through the fused models. The two MID methods are applied to UV-visible (UV-vis), near infrared (NIR) and mid-infrared (MIR) spectral data of active ingredient in pesticide, and gas chromatography-mass spectrometer (GC-MS) and NIR spectral data of n-heptane in chemical complex for high-level fusion. Moreover, the results are compared with the individual methods. As a result, the overall results show that the two MID methods are promising with significant improvement of predictive performance for high-level fusion when executing quantitative analysis.

Effect of the Architecture of Fiber-Optic Probes Designed for Soluble Solid Content Prediction in Intact Sugar Beet Slices

Sugar beet is the second biggest world contributor to sugar production and the only one grown in Europe. One of the main limitations for its competitiveness is the lack of effective tools for assessing sugar content in unprocessed sugar beet roots, especially in breeding programs. In this context, a dedicated near infrared (NIR) fiber-optic probe based approach is proposed. NIR technology is widely used for the estimation of sugar content in vegetable products, while optic fibers allow a wide choice of technical properties and configurations. The objective of this research was to study the best architecture through different technical choices for the estimation of sugar content in intact sugar beet roots. NIR spectral measurements were taken on unprocessed sugar beet samples using two types of geometries, single and multiple fiber-probes. Sugar content estimates were more accurate when using multiple fiber-probes (up to R² = 0.93) due to a lesser disruption of light specular reflection. In turn, on this configuration, the best estimations were observed for the smallest distances between emitting and collecting fibers, reducing the proportion of multiply scattered light in the spectra. Error of prediction (RPD) values of 3.95, 3.27 and 3.09 were obtained for distances between emitting and collecting fibers of 0.6, 1.2 and 1.8 µm respectively. These high RPD values highlight the good predictions capacities of the multi-fiber probes. Finally, this study contributes to a better understanding of the effects of the technical properties of optical fiber-probes on the quality of spectral models. In addition, and beyond this specificity related to sugar beet, these findings could be extended to other turbid media for quantitative optical spectroscopy and eventually to validate considered fiber-optic probe design obtained in this experimental study.

Model development for non-destructive determination of rind biochemical properties of 'Marsh' grapefruit using visible to near-infrared spectroscopy and chemometrics

Rind biochemical properties play major roles in defence mechanisms against the incidence of rind physiological disorders of citrus fruit during cold storage. Hence, multivariate calibration models were developed to rapidly and non-destructively determine rind biochemical properties of citrus fruit from visible to near-infrared (Vis/NIR) spectra acquired by Vis/NIR spectroscopy using partial least square regression algorithm. To achieve optimum models for determination of each rind biochemical property, several mathematical pre-processing methods were explored, including no pre-treatment. However, special emphases were given to the best model statistics in terms of coefficient of determination (R²) and residual predictive deviation (RPD). Models were performed by critical examination of different wavelength ranges (visible, near-infrared and full regions) and combinations of fruit harvested from different production regions and acquired before (week 0) and after (week 9) cold storage. Results obtained showed excellent models for determining parameters such as sucrose (R² = 0.99 and RPD = 11.42), total flavonoids (R² = 0.99 and RPD = 12.37), and chlorophyll b (R² = 0.97 and RPD = 5.67). This study reported the first application of Vis/NIR and chemometrics in determining the rind biochemical properties of 'Marsh' grapefruit rapidly and non-destructively.

Citrus species and hybrids depicted by near- and mid-infrared spectroscopy

BACKGROUND

Citrus trees are among the most cultivated plants in the world, with a high economic impact. The wide sexual compatibility among relatives gave rise to a large number of hybrids that are difficult to discriminate. This work sought to explore the ability of infrared spectroscopy to discriminate among Citrus species and/or hybrids and to contribute to the elucidation of its relatedness.

RESULTS

Adult leaves of 18 distinct Citrus plants were included in this work. Near- and mid-infrared (NIR and FTIR) spectra were acquired from leaves after harvesting and a drying period of 1 month. Spectra were modelled by principal component analysis and partial least squares discriminant analysis. Both techniques revealed a high discrimination potential (78.5-95.9%), being the best results achieved with NIR spectroscopy and air-dried leaves (95.9%).

CONCLUSION

Infrared spectroscopy was able to successfully discriminate several Citrus species and/or hybrids. Our results contributed also to enhance insights regarding the studied Citrus species and/or hybrids. Despite the benefit of including additional samples, the results herein obtained clearly pointed infrared spectroscopy as a reliable technique for Citrus species and/or hybrid discrimination. © 2018 Society of Chemical Industry.

Classification and Processing Optimization of Barley Milk Production Using NIR Spectroscopy, Particle Size, and Total Dissolved Solids Analysis

Barley is a grain whose consumption has a significant nutritional benefit for human health as a very good source of dietary fibre, minerals, vitamins, and phenolic and phytic acids. Nowadays, it is more and more often used in the production of plant milk, which is used to replace cow milk in the diet by an increasing number of consumers. The aim of the study was to classify barley milk and determine the optimal processing conditions in barley milk production based on NIR spectra, particle size, and total dissolved solids analysis. Standard recipe for barley milk was used without added additives. Barley grain was ground and mixed in a blender for 15, 30, 45, and 60 seconds. The samples were filtered and particle size of the grains was determined by laser diffraction particle sizing. The plant milk was also analysed using near infrared spectroscopy (NIRS), in the range from 904 to 1699 nm. Furthermore, conductivity of each sample was determined and microphotographs were taken in order to identify the structure of fat globules and particles in the barley milk. NIR spectra, particle size distribution, and conductivity results all point to 45 seconds as the optimal blending time, since further blending results in the saturation of the samples.

Optimizing the models for rapid determination of chlorogenic acid, scopoletin and rutin in plant samples by near-infrared diffuse reflectance spectroscopy

Polyphenols in plant samples have been extensively studied because phenolic compounds are ubiquitous in plants and can be used as antioxidants in promoting human health. A method for rapid determination of three phenolic compounds (chlorogenic acid, scopoletin and rutin) in plant samples using near-infrared diffuse reflectance spectroscopy (NIRDRS) is studied in this work. Partial least squares (PLS) regression was used for building the calibration models, and the effects of spectral preprocessing and variable selection on the models are investigated for optimization of the models. The results show that individual spectral preprocessing and variable selection has no or slight influence on the models, but the combination of the techniques can significantly improve the models. The combination of continuous wavelet transform (CWT) for removing the variant background, multiplicative scatter correction (MSC) for correcting the scattering effect and randomization test (RT) for selecting the informative variables was found to be the best way for building the optimal models. For validation of the models, the polyphenol contents in an independent sample set were predicted. The correlation coefficients between the predicted values and the contents determined by high performance liquid chromatography (HPLC) analysis are as high as 0.964, 0.948 and 0.934 for chlorogenic acid, scopoletin and rutin, respectively.

Measurement of process variables in solid-state fermentation of wheat straw using FT-NIR spectroscopy and synergy interval PLS algorithm

The feasibility of rapid determination of the process variables (i.e. pH and moisture content) in solid-state fermentation (SSF) of wheat straw using Fourier transform near infrared (FT-NIR) spectroscopy was studied. Synergy interval partial least squares (siPLS) algorithm was implemented to calibrate regression model. The number of PLS factors and the number of subintervals were optimized simultaneously by cross-validation. The performance of the prediction model was evaluated according to the root mean square error of cross-validation (RMSECV), the root mean square error of prediction (RMSEP) and the correlation coefficient (R). The measurement results of the optimal model were obtained as follows: RMSECV=0.0776, R(c)=0.9777, RMSEP=0.0963, and R(p)=0.9686 for pH model; RMSECV=1.3544% w/w, R(c)=0.8871, RMSEP=1.4946% w/w, and R(p)=0.8684 for moisture content model. Finally, compared with classic PLS and iPLS models, the siPLS model revealed its superior performance. The overall results demonstrate that FT-NIR spectroscopy combined with siPLS algorithm can be used to measure process variables in solid-state fermentation of wheat straw, and NIR spectroscopy technique has a potential to be utilized in SSF industry.

Quantitative determination by temperature dependent near-infrared spectra: a further study

Quantitative spectra-temperature relationship (QSTR) between near-infrared (NIR) spectra and temperature has been studied in our previous work (Talanta, 2010, 82, 1017-1021). In this study, applicability of the QSTR model for quantitative determination is further studied using the spectra of aqueous ethanol samples in the temperature range of 31-40°C and the concentration range of 1-99%. The results show that QSTR model can be built by using the spectra in a small temperature range and the quantitative analysis can be achieved by only two spectra at different temperatures. Moreover, calibration curves for different concentration ranges (1-5%, 20-70%, 95-99%, v/v) are investigated by using linear and nonlinear curve fitting, respectively. Both of the linear and nonlinear curves are found to be applicable within these concentration ranges. Therefore, the temperature dependent NIR spectra may provide a new way for quantitative determination and may have high potential in bio-fluids analysis or industrial practices.

Simultaneous determination of and in wastewater using near-infrared diffuse reflectance spectroscopy with adsorption preconcentration

Near-infrared diffuse reflectance spectroscopy (NIRDRS) has been proven to be a convenient and fast quantitative method for complex samples. A method for simultaneous quantitative determination of phenol and p-nitrophenol in wastewater was developed by using NIRDRS with a preconcentration procedure of resin adsorption. In the method, the analytes were firstly adsorbed onto the adsorbent, and then the NIRDRS spectrum of the adsorbent was measured for quantitative analysis by partial least squares (PLS) regression. The results show that the two phenolic compounds can be immobilized onto the adsorbent and directly measured by NIRDRS. The correlation coefficients (R) between the reference values and prediction results for phenol and p-nitrophenol were 0.958 and 0.957, respectively. Furthermore, the interferences of the coexistence components can be eliminated with the aid of multivariate calibration. The method may provide a sensitive, effective and fast way for simultaneous quantitative analysis of phenol and p-nitrophenol in solution samples.

A strategy for enhancing the quantitative determination ability of the diffuse reflectance near-infrared spectroscopy

Near-infrared diffuse reflectance spectroscopy (NIRDRS) has been proved to be a convenient and fast quantitative method for complex samples. The high detection limit or the low sensitivity of the method, however, is a big problem obstructing its application in the analysis of low concentration samples. A strategy for quantitative determination of low concentration samples was developed by using NIRDRS. The method takes an adsorbent as a substrate for gathering the analytes from a solution, and uses the multivariate calibration technique for quantitative calculation. So, the detection limit can be improved and the interferences can be eliminated when complex samples are analyzed. Taking benzoic and sorbic acids as the analyzing targets and the alumina as the adsorbent, partial least squares (PLS) model is built from the NIRDRS of the adsorbates. The results show that the concentrations that can be quantitatively detected are as low as 0.011 and 0.013 mg mL(-1) for benzoic and sorbic acids, respectively, and the co-adsorbates do not interfere each other.