Micelle enhanced and terbium sensitized spectrofluorimetric determination of danofloxacin in milk using molecularly imprinted solid phase extraction

A novel synchronous fluorescence spectrometry combined with fluorescence sensitization for the highly sensitive and simultaneous detection of enoxacin, ofloxacin and tetracycline hydrochloride residues in wastewater

The synergistic effect of sodium dodecyl sulfate (SDS) and Mg2+ could significantly enhance the fluorescence intensity of enoxacin (ENO) at λex/λem = 269.2 nm/385.6 nm, ofloxacin (OFL) at λex/λem = 290.8 nm/466.2 nm and tetracycline hydrochloride (TCH) at λex/λem = 372.6 nm/514.8 nm. Moreover, when the wavelength difference (Δλ) was chosen 135 nm, the synchronous fluorescence spectra of the three antibiotic complexes could be well separated and the interference of the samples matrix were eliminated primely. Therefore, only one synchronous fluorescence scan was needed to simultaneously determine the three antibiotics. Based on these facts, a synchronous fluorescence spectrometry combining fluorescence sensitization for highly sensitive and selective determination of ENO, OFL and TCH residues in wastewater was developed for the first time. The experimental results showed that the concentrations of ENO, OFL and TCH in the range of 0.5-550 ng mL-1, 1-1500 ng mL-1 and 10-5500 ng mL-1 showed a good linear relationship with fluorescence intensity. The limits of detection were 0.0599 ng mL-1, 0.115 ng mL-1 and 0.151 ng mL-1, respectively. The recoveries of the actual sample were 87.50%-99.99 %, 93.00%-98.50 % and 85.70%-98.42 %, respectively. Overall, the novel synchronous fluorescence spectrometry established in the experiment has the advantages of high sensitivity, good selectivity, fast detection speed and high accuracy. It has been successfully applied to the detection of residual amounts of ENO, OFL and TCH in wastewater with satisfactory results.

Current analytical strategies for the determination of quinolone residues in milk

Quinolones are potent antibacterial drugs extensively utilized for treating bacterial infections in poultry. However, the presence of quinolone antibiotic residues in milk is a matter of concern due to potential health risks and adverse effects on milk quality. This review provides an overview of current analytical strategies for the determination of quinolone residues in milk. Various sample preparation techniques, such as liquid-phase extraction, solid-phase extraction and QuEChERS, are discussed, along with detection methods including instrument-based detection, immune-based detection, and microbial detection. The advantages and limitations of each method are highlighted, as well as their applicability in different stages of milk production. Additionally, recent advancements in sample preparation and detection methods are presented. This comprehensive review aims to contribute to the development of accurate and reliable methods for the detection of quinolone residues in milk, ensuring the safety and quality of dairy products.

Terbium-based dual-ligand metal organic framework by diffusion method for selective and sensitive detection of danofloxacin in aqueous medium

A water-dispersible Tb(III)-based metal organic framework (TBP) was produced by diffusion technique using benzene-1,3,5-tricarboxylic acid (BTC) and pyridine as easily accessible ligands at low cost. The as-synthesized TBP with a crystalline structure and rod-shaped morphology has exhibited thermal stability up to 465 °C. Elemental analysis confirmed the presence of carbon, oxygen, nitrogen, and terbium in the synthesized MOF. TBP was used as a fluorescent probe for detection of danofloxacin (DANO) in an aqueous medium with significant enhancement of fluorescence intensity as compared to various fluoroquinolone antibiotics (levofloxacin (LEVO), ofloxacin (OFLO), norfloxacin (NOR), and ciprofloxacin (CIPRO)) with a low detection limit of 0.45 ng/mL (1.25 nm). The developed method has successfully detected DANO rapidly (i.e., response time = 1 min) with remarkable recovery (97.66-101.96%) and a relative standard deviation (RSD) of less than 2.2%. Additionally, TBP showcased good reusability up to three cycles without any significant performance decline. The in-depth mechanistic studies of the density functional theory (DFT) calculations and mode of action revealed that hydrogen bonding interactions and photo-induced electron transfer (PET) are the major factors for the turn-on enhancement behavior of TBP towards DANO. Thus, the present work provides the quick and precise identification of DANO using a new fluorescent MOF (TBP) synthesized via a unique and facile diffusion technique.

Development of Novel Microwell-Based Spectrofluorimetry and High-Performance Liquid Chromatography with Fluorescence Detection Methods and High Throughput for Quantitation of Alectinib in Bulk Powder and Urine Samples

Background and Objectives: This study presents the development and validation of the 96-microwell-based spectrofluorimetric (MW-SFL) and high performance liquid chromatography (HPLC) with fluorescence detection (HPLC-FD) methods for the quantitation of alectinib (ALC) in its bulk powder form and in urine samples. Materials and Methods: The MW-SFL was based on the enhancement of the native fluorescence of ALC by the formation of micelles with the surfactant cremophor RH 40 (Cr RH 40) in aqueous media. The MW-SFL was executed in a 96-microwell plate and the relative fluorescence intensity (RFI) was recorded by utilizing a fluorescence plate reader at 450 nm after excitation at 280 nm. The HPLC-FD involved the chromatographic separation of ALC and ponatinib (PTB), as an internal standard (IS), on a C18 column and a mobile phase composed of methanol:potassium dihydrogen phosphate pH 7 (80:20, v/v) at a flow rate of 2 mL min–1. The eluted ALC and PTB were detected by utilizing a fluorescence detector set at 365 nm for excitation and 450 nm for emission. Results: Validation of the MW-SFL and HPLC-FD analytical methods was carried out in accordance with the recommendations issued by the International Council for Harmonization (ICH) for the process of validating analytical procedures. Both methods were efficaciously applied for ALC quantitation in its bulk form as well as in spiked urine; the mean recovery values were ≥86.90 and 95.45% for the MW-SFL and HPLC-FD methods, respectively. Conclusions: Both methodologies are valuable for routine use in quality control (QC) laboratories for determination of ALC in pure powder form and in human urine samples.

Novel sensing probe using Terbium-sensitized luminescence and 8-hydroxyquinoline for determination of prucalopride succinate: green assessment with Complex-GAPI and analytical Eco-Scale

A highly sensitive spectrofluorimetric method is developed for the determination of prucalopride succinate (PRU). The method depends on lanthanide-sensitized luminescence due to complex formation between the drug and terbium chloride (Tb⁺³) which is enhanced by the addition of 8 hydroxyquinoline (8HQ) and phosphate buffer (0.02 M, pH 3.2). The calibration curve was constructed over the linear range 10–300 ng/mL after excitation at 226 nm and measuring the emission of the ternary complex at 544 nm. The method was validated according to ICH Q2 (R1) guidelines and showed a good recovery ± RSD of 100.41% ± 1.26, the limits of detection and quantitation were found to be 2.81 and 8.53 ng/mL, respectively. The proposed method was successfully applied for the determination of the drug marketed tablet dosage form and the results were in good agreement with the reference method. Also, the method greenness was evaluated according to Complex-GAPI and analytical Eco-Scale.

Development of novel response surface methodology-assisted micellar enhanced synchronous spectrofluorimetric method for determination of vandetanib in tablets, human plasma and urine

A highly sensitive and accurate novel response surface methodology (RSM)-assisted micellar enhanced synchronous spectrofluorimetric method was developed and validated for determination of vandetanib (VDB) in tablets, human plasma and urine. The method relied on enhancement of the fluorescence behavior of VDB in polyoxyethylene hydrogenated castor oil 40 (HCO 40) micellar medium and measuring the fluorescence using synchronous scan approach (Δλ = 50 nm). Key factors affecting VDB fluorescence were optimized by RSM using Box-Behnken design. These factors were the type and volume of surfactant and pH of the buffer medium. Under the optimum conditions, the fluorescence-concentration plot was linear over the range 40-600 ng mL^-1; the limits of detection and quantification were 5.22 and 15.82 ng mL^-1, respectively. The suggested method was successfully applied to the analysis of laboratory-prepared tablets, spiked human plasma and urine samples. The results were statistically compared with those acquired by a pre-validated liquid chromatography-tandem mass spectrometric reference method and the results obtained from both methods were found to be in good agreement.

Utility of Cremophor RH 40 as a micellar improvement for spectrofluorimetric estimation of sorafenib in pure form, commercial preparation, and human plasma

An easy, quick, simple and accurate spectrofluorimetric method was recognized and validated for evaluation of sorafenib (SOR) in pure form and biologically in plasma. Cremophor RH 40 (Cr RH 40) used for enhancing the fluorescence activity of SOR in phosphate buffer (pH 7). Cr RH 40 improved the native fluorescence of SOR remarkably in water. The fluorescence spectrum of SOR was observed at 405 nm after excitation at 265 nm. The linearity appeared to be in the range of 5 to 600 ng ml^-1 for pure and from 9 to 500 ng ml^-1 for plasma using the protein precipitation (ppt) method while from 10 to 500 ng ml^-1 for plasma using liquid-liquid extraction method. The precisions and the accuracy of the estimated method gave satisfactory results. The recommended method was effectively applied for determination of SOR in human plasma with high recovery values. The results of some compounds that are possibly found in plasma were studied. The proposed method was also focused on real volunteers and a drug dissolution test.

Micellar Enhanced Spectrofluorimetric Method for the Determination of Ponatinib in Human Plasma and Urine via Cremophor RH 40 as Sensing Agent

An impressively simple and precise spectrofluorimetric procedure was established and validated for ponatinib (PTB) quantitation in biological fluids such as human plasma and human urine. This method depends on examining the fluorescence characteristics of PTB in a micellar system of Cremophor RH 40 (Cr RH 40). Cr RH 40 enhanced the intrinsic fluorescence of PTB distinctly in aqueous water. The fluorescence spectra of PTB was recorded at 457 nm following its excitation at 305 nm. Maximum fluorescence intensity was attained by addition of 0.7 mL of Cr RH 40 and one mL of phosphate buffer to PTB aliquots and then dilution with distilled water. There is a linear relationship between the fluorescence intensity of PTB and its concentration over the range 5–120 ngmL⁻¹, with limit of detection and limit of quantification equal to 0.905 ngmL⁻¹ and 2.742 ngmL⁻¹, respectively. The accuracy and the precisions of the proposed method were checked and gave adequate results. The adopted method was applied with a great success for PTB quantitation in different biological matrices (spiked human plasma and urine) giving high recovery values.

Fluorescence and co-fluorescence of Tb(3+) and Eu(3+) in acetonitrile using 2,6-pyridine dicarboxylic acid as ligand

Fluorescence from Tb(3+) and Eu(3+) complexed with 2,6-pyridine dicarboxylic acid (PDA) has been studied using acetonitrile (MeCN) as solvent. The enhancement in fluorescence intensity because of non-aqueous environment provided by the MeCN is less significant, where as fluorescence enhancement of more than two orders of magnitude has been observed with the addition of La(3+); a process known as co-fluorescence in MeCN. The present study demonstrates for the first time co-fluorescence of Tb(3+) and Eu(3+) with excitation through the absorption of PDA. Intermolecular energy transfer is believed to be responsible for co-fluorescence enhancement and it becomes possible as the quenching due to water at the secondary coordination spheres of Tb(3+) and Eu(3+) is reduced when MeCN is used as solvent.

A new method to determine the new C-Met inhibitor “Cabozantinib” in dosage form and human plasma via micelle-enhanced spectrofluorimetry

A highly sensitive and simple micelle-enhanced spectrofluorimetric method was developed for the determination of cabozantinib (CBZ) in its pharmaceutical formulation and spiked human plasma without any derivatization.

β-Cyclodextrin decorated nanocellulose: a smart approach towards the selective fluorimetric determination of danofloxacin in milk samples

Nanocellulose conjugation with specific cavitands allows the design and preparation of recycling extraction nanomaterials with unique host–guest properties in both analytical and bioanalytical fields.

Applications of micelle enhancement in luminescence-based analysis

Micelles are self-assembled aggregates that arrange themselves into spheres in aqueous media. When the surfactant concentration reaches the critical micelle concentration, extensive aggregation of the surfactant monomers occurs to form micelles. A micelle has both a hydrophilic and a hydrophobic part. This allows them to form a spherical shape and for their glycolipid and phospholipid components to form lipid bilayers. The importance of micelles is increasing because of their wide analytical applications. Recently, colloidal carrier systems have received much attention in the field of analytical chemistry, especially in luminescence enhancement applications.

A highly sensitive and selective assay of doxycycline by dualwavelength overlapping resonance Rayleigh scattering

A dual-wavelength overlapping resonance Rayleigh scattering (DWO-RRS) method was developed and validated for highly sensitive and selective assay of doxycycline residues in several meat samples. The response signals were dependent on the specific multi-site coordination between lanthanum(III) and doxycycline (DOTC). And La(III)-DOTC complex would further aggregate to form [La(III)-DOTC]n nanoparticles, resulting in the occurrence of two new scattering peaks. Notably, with the addition of DOTC, the increments of both of these two wavelengths were proportional to the concentration of DOTC over the ranges of 3.9-4.0×10(3) nmol L(-1) (1.7-1.8×10(3) μg/kg). The detection limit of DWO-RRS was 1.1 nmol L(-1) (0.5 μg/kg), which was lower than or comparable to most of the published methods. Additionally, the generating mechanisms of multi-response RRS signals were discussed and a semi-empirical principle was established for better design of multi-response RRS probes.

A novel solid fluorescence method for the fast determination of quercetin in biological samples based on the quercetin-Al(III) complex imprinted polymer

In this work, a novel solid fluorescence method was proposed and applied to the fast determination of quercetin in urine and onion skin samples by using metal coordination imprinted polymer membrane, which was regarded as a recognition element. The quercetin-Al(III) imprinted polymer was immobilized in the microporous polypropylene fiber membrane via consecutive in situ polymerization. The CIP membrane had the porous, loose and layer upon layer structure. The CIP membrane was characterized by electron microscope photographs, infrared spectra, thermogravimetric analysis and solvent-resistant investigation. The extraction conditions including extraction solvent, extraction time, desorption solvent were optimized. Compared with MIP and NIP membrane, CIP membrane had been proved to be peculiar selective for quercetin even in presence of the structurally similar compounds such as kaempferol, rutin, naringenin and alpinetin. The CIP membrane was characteristic of high selectivity, stable and sensitive response to quercetin in polar environment. Under the optimum condition, there was a linear relationship between the state fluorescent response and the concentration of quercetin. The linear calibration range was over 0.02 mg L(-1)-0.80 mg L(-1) with a detection limit of 5 μg L(-1). The method was characteristic of flexible and good repeatability with relative standard deviation (RSD) of 4.1%. The proposed method was also successfully applied for the determination of quercetin in urine and onion skin samples without complicated pretreatment. The recoveries were 84.0-112.4% and RSDs varied from 1.5% to 6.8%. The results obtained by the proposed method agreed well with those obtained by HPLC method.

Metal complexes of quinolone antibiotics and their applications: an update

Quinolones are synthetic broad-spectrum antibiotics with good oral absorption and excellent bioavailability. Due to the chemical functions found on their nucleus (a carboxylic acid function at the 3-position, and in most cases a basic piperazinyl ring (or another N-heterocycle) at the 7-position, and a carbonyl oxygen atom at the 4-position) quinolones bind metal ions forming complexes in which they can act as bidentate, as unidentate and as bridging ligand, respectively. In the polymeric complexes in solid state, multiple modes of coordination are simultaneously possible. In strongly acidic conditions, quinolone molecules possessing a basic side nucleus are protonated and appear as cations in the ionic complexes. Interaction with metal ions has some important consequences for the solubility, pharmacokinetics and bioavailability of quinolones, and is also involved in the mechanism of action of these bactericidal agents. Many metal complexes with equal or enhanced antimicrobial activity compared to the parent quinolones were obtained. New strategies in the design of metal complexes of quinolones have led to compounds with anticancer activity. Analytical applications of complexation with metal ions were oriented toward two main directions: determination of quinolones based on complexation with metal ions or, reversely, determination of metal ions based on complexation with quinolones.