A simple spectrophotometric method for the determination of arsenic in industrial and environmental samples using 2,4-Dihydroxy benzophenone-2-amino thiophenol

Design, spectral, molecular modeling, antimitotic, analytical and mechanism studies of phenyl isothiocyanate Girard's T derived metal complexes

The ligand N-{[(phenyl amino) thioxomethyl] hydrazino carbonyl methyl} trimethyl ammonium chloride (PTHAC) was prepared by the refluxing phenyl isothiocyanate and Girard-T (trimethyl ammonium-acethydrazide) in a molar ratio (1:1). The metal complexes derived from NiCl2.6H2O, CuCl2.2H2O and Co(CH3COO)2.6H2O were synthesized and purified. The PTHAC and its Cu(II), Co(II), and Ni(II) metal complexes(1-3) were characterized using a variety of various instrumental performances such as elemental analysis, magnetic moment, spectra (IR, UV-Vis, 1H NMR, mass) and thermal analysis (TGA and DTG).The results of element analysis, magnetic moment, spectra (IR, UV-Vis, 1H NMR, mass), and thermal (TGA and DTA) analyses provide the structures of the produced ligand and its (1-3) complexes. According to the spectroscopic results, PTHAC acts as an O, N and S tridentate donor, creating a mononuclear complex with copper(II), cobalt(II), and nickel(II) ions with an octahedral geometry. All of the atomic properties, including bond lengths, bond angles, HOMO, LUMO, dipole moments, and charges, have been determined. The cytotoxic activities of the PTHAC and the produced (1-3) complexes against breast carcinoma cells have been studied and correlated to the molecular modeling. When compared to the free ligand, CoII-L, and NiII-L, the CuII-L complex inhibits breast cancer cell growth more effectively. Furthermore, the PTHAC ligand was successfully applied for separation via flotation and spectrophotometric determination of Co(II) in several natural water, certified ore and pharmaceutical samples using oleic acid surfactant (HOL). At pH 6.5, PTHAC reacted with Co(II) to create a dark green (1:1) Co(II):PTHAC complex that was floated significantly using oleic acid (HOL) surfactant. The different experimental variable affecting the separation procedure e.g. pH, concentration of Co(II), HOL, PTHAC, temperature etc.…, were investigated. Co(II) had a linear range of (0.1-7.0) mgL-1. In the aqueous and scum layers, the molar absorptivities for the coloured complex are 0.14 × 104 and 0.16 × 105Lmol-1 cm-1, respectively. The LOD was 0.04 mgL-1, which is related to Sandell sensitivity of 3.7 × 10-3 µg cm-2 with a preconcentration factor of 200 and a RSD, % (n = 5) less than 4.2%. In addition, the mechanisms involved in the process of coordination of PTHAC with Cu(II), Co(II) and Ni(II) and the mechanism involved in the process of flotation of the PTHAC-Co(II) complex using HOL surfactant were elucidated.

Recent advances in fluorescence-based chemosensing of organoarsenic feed additives using luminescence MOFs, COFs, HOFs, and QDs

Organoarsenics are low-toxicity compounds that are used widely as feed additives to promote livestock growth, enhance meat pigmentation, and fight against intestinal parasites. The organoarsenic compounds are commonly found in poultry waste and the degradation of organoarsenic produces the toxic carcinogen inorganic arsenic such as As(V) and As(III), which results in severe arsenic pollution of soil and groundwater. As a consequence, there exists a high necessity to develop suitable sensing methods for the trace detection and quantification of organoarsenic feed additives in wastewater. Among various detection methods, in particular, fluorescence-based sensing has become a popular and efficient method used extensively for sensing water contaminants and environmental contaminants. In the recent past, a wide variety of fluorescence chemosensors have been designed and employed for the efficient sensing and quantification of the concentration of organoarsenic feed additives in different environmental samples. This review article systematically highlights various fluorescence chemosensors reported to date for fluorescence-based sensing of organoarsenic feed additives. The fluorescence sensors discussed in this review are classified and grouped according to their structures and functions, and in each section, we provide a detailed report on the structure, photophysics, and fluorescence sensing properties of different chemosensors. Lastly, the future perspectives on the design and development of practically useful sensor systems for selective and discriminative sensing of organoarsenic compounds have been stated.

Development of a microfluidic membraneless vaporization flow system for trace analysis of arsenic

A new design of a membraneless vaporization (MBL-VP) unit coupled with a specific flow system is presented for the determination of arsenic at trace levels using a hydride generation process. The MBL-VP unit contains two concentric conical reservoirs, with the outer cone selected as the donor reservoir. The volume of the outer donor reservoir is thereby greater than the acceptor volume, necessary for holding sufficient sample and reagents for the generation of arsine gas by reaction between As(iii) and sodium borohydride under acidic conditions. The arsine gas diffuses into the narrow headspace and is absorbed by an aliquot of 150 μL of mercuric chloride acceptor solution. The resulting reaction produces hydronium ions which is monitored by the absorbance change at 530 nm of the methyl orange indicator added in the acceptor solution. To decrease the detection limit, the aspiration and removal of the donor plug, comprising the sample, borohydride and acid, into and out of the donor cone are repeated several times, while the acceptor solution is kept unchanged. As a result, analysis of arsenic was achieved in the range of 10 to 100 μg L-1 with a detection limit of 8 μg L-1. Application to surface water was investigated. Percent recoveries of spiked surface water samples were in the range of 94-110%. For comparison of total arsenic (As(iii) and As(v)), the results obtained from the developed method are not statistically different from the ICP-OES method.

Green Luminescent CdTe Quantum Dot Based Fluorescence Nano-Sensor for Sensitive Detection of Arsenic (III)

Arsenic (As³⁺) is a hazardous and ubiquitous element; hence the quantitative detection of arsenic in various kinds of environmental sample is an important issue. Herein, we reported L-cysteine capped CdTe Quantum dot based optical sensor for the fluorometric detection of arsenic (III) in real water sample. The method is based on the fluorescence quenching of QDs with the addition of arsenic solution that caused the reduction in fluorescence intensity due to strong interaction between As³⁺ and L-cysteine to form As(Cys)₃. The calibration curve was linear over 2.0 nM-0.5 μM arsenic with limit of detection (LOD) of 2.0 nM, correlation coefficient (r²) of 0.9698, and relative standard deviation (RSD %) of 5.2%. The Stern-Volmer constant for the quenching of CdTe QDs with As³⁺ at optimized condition was evaluated to be 1.17 × 10⁸ L mol^-1 s^-1. The feasibility of the sensor has been analyzed by checking the inference of common metal ions available in the water such as K⁺, Na⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Al³⁺, Co²⁺, Cr²⁺, Fe³⁺ and its higher oxidation state As⁵⁺. Graphical Abstract Schematic representation of As³⁺ detection by L-Cysteine capped CdTe QDs.