Fluorescent graphene quantum dot nanoprobes for the sensitive and selective detection of mercury ions

Determination of lead(II) in food samples using a functionalized paper-based fluorescent sensor modified by carbon dots

This work discusses surface modification of cellulose paper specimens for compatibility with nitrogen and sulfur co-doped carbon dots (NSCDs) for lead ion sensing. The interaction of carbon dots (CDs) and cellulose fibers was investigated using silane or chitosan-modified cellulose papers. It was found that modified papers could reduce undesirable redistribution of CDs, during paper drying. Also, only chitosan-modified filter paper was suitable for the successful immobilization of NSCDs. The effect of paper type, chitosan amount, pH, and NSCDs concentration was also studied, and a Whatman No. 42 filter paper modified with chitosan (1% w/v), pH 8.0, and an NSCD concentration of 2.5 g L-1 being selected for further studies. The sensor exhibited high selectivity for lead(II) compared with other metal ions because lead(II) resulted in the most significant changes in the emitted light intensity. Variations in NSCDs fluorescence were measured using a fluorescence imaging system. The NSCDs-paper sensor showed a linear relationship between mean fluorescence intensity and lead(II) in the concentration range of 5.00-1.25 × 102  μmol L-1 with a correlation coefficient (R2 ) of 0.9988 and a detection limit of 4.50 μmol L-1 . The suggested method showed satisfying results for lead(II) determination in different samples as a fast and low-cost approach with on-site application.

Fluorescence Sensing Mechanisms of Versatile Graphene Quantum Dots toward Commonly Encountered Heavy Metal Ions

Graphene quantum dots (GQDs) have received tremendous attention as fluorescent probes for detection of diverse heavy metal ions (HMIs). Nevertheless, the fluorescence sensing mechanisms of versatile GQDs with respect to different HMIs remain elusive. Herein, the fluorescence sensing behaviors and mechanisms of GQDs with amino and carboxyl groups toward commonly encountered Cr6+, Fe3+, Cu2+, Cr3+, Mn2+, Co2+, Ni2+, Zn2+, Cd2+, and Hg2+ under different pH conditions are systemically explored. The results show that the fluorescence of GQDs can be enhanced by Zn2+/Cd2+ and quenched by other HMIs at pH 5.8, while it can be enhanced by HMIs except Cr6+/Fe3+/Cu2+ at pH 2.0. Systematic studies verify that the fluorescence quenching/enhancing is mediated by the synergistic effect of the inner filter effect (IFE) and the photoinduced electron transfer (PET) or metal orbital-controlled chelation-quenched/enhanced fluorescence (CHQF/CHEF) effect. The strong and weak IFEs of Cr6+/Fe3+ and Cr3+/Cu2+, respectively, are one of the reasons for the fluorescence quenching, while other HMIs have no IFE. Moreover, the PET effect caused by the interaction of GQDs with Hg2+ at pH 5.8 and the CHQF/CHEF effect caused by the interaction of GQDs with other HMIs are also crucial for fluorescence quenching/enhancing. The findings suggest that the pH condition, the existing forms of functional groups on GQDs, and the complexation states of HMIs in aqueous systems dominate the PET and CHQF/CHEF effects. The elucidating of the fluorescence sensing mechanisms of GQDs toward different HMIs paves the way for developing versatile sensing platforms for monitoring of HMI contamination.

A Smartphone-Based Sensing for Portable and Sensitive Visual Detection of Hg (II) via Nitrogen Doped Carbon Quantum Dots Modified Paper Strip

The development of portable and cost-effective sensing system for Hg2+ quantitation is highly demanded for environmental monitoring. Herein, an on-site, rapid and portable smartphone readout device based Hg2+ sensing system integrating nitrogen-doped carbon quantum dots (NCDs) modified paper strip was proposed, and the physicochemical properties of NCDs were characterized by high resolution TEM, FTIR, UV-vis absorption spectrum and fluorescence spectral analysis. The modified paper strip was prepared via "ink-jet" printing technology and exhibits sensitive fluorescence response to Hg2+ with fluorescence color of bright blue (at the excitation/emission wavelength of 365/440 nm). This portable smartphone-based sensing platform is highly selective and sensitive to Hg2+ with the limit of detection (LOD) of 10.6 nM and the concentration range of 0-130 nM. In addition, the recoveries of tap water and local lake water were in the range of 89.4% to 109%. The cost-effective sensing system based on smartphone shows a great potential for trace amounts of Hg2+ monitoring in environmental water samples.

Hydrothermal Synthesis of Functionalized Carbon Nanodots and Their Clusters as Ionic Probe for High Sensitivity and Selectivity for Sulfate Anions with Excellent Detection Level

Nitrogen-doped carbon nanodots (CNDs) were synthesized and utilized as sensing probes to detect different anions and metallic ions within aqueous solutions. The pristine CNDs were developed through a one-pot hydrothermal synthesis. o-Phenylenediamine was used as the precursor. A similar hydrothermal synthesis technique in the presence of polyethylene glycol (PEG) was adopted to form the PEG-coated CND clusters (CND-100k). Through photoluminescence (PL) quenching, both CND and PEG-coated CND suspensions display ultra-high sensitivity and selectivity towards HSO₄^- anions (Stern-Volmer quenching constant (K_SV) value: 0.021 ppm^-1 for CND and 0.062 ppm^-1 for CND-100k) with an ultra-low detection limit (LOD value: 0.57 ppm for the CND and 0.19 ppm for CND-100k) in the liquid phase. The quenching mechanism of N-doped CNDs towards HSO₄^- ions involves forming the bidentate as well as the monodentate hydrogen bonding with the sulfate anionic moieties. The detection mechanism of metallic ions analyzed through the Stern-Volmer formulation reveals that the CND suspension is well suited for the detection of Fe³⁺ (K_SV value: 0.043 ppm^-1) and Fe²⁺ (K_SV value: 0.0191 ppm^-1) ions, whereas Hg²⁺ (K_SV value: 0.078 ppm^-1) sensing can be precisely performed by the PEG-coated CND clusters. Accordingly, the CND suspensions developed in this work can be employed as high-performance PL probes for detecting various anions and metallic ions in the liquid phase.

A facile imine-linked covalent organic framework doped with a carbon dot composite for the detection and removal of Hg2+ in surface water

Hg2+ is one of the most toxic chemical species in the water environment, and thus developing a new fluorescent covalent organic framework for both the detection and removal of Hg2+ is highly desirable. Herein, a fluorescent composite, termed TpPa-1 COF@CDs, was synthesized by inverse emulsion polymerization method using an imine covalent organic framework as the supporting material and carbon dots as the fluorescent sensor element. The crystallinity, porosity, rich functional receptors (hydroxyl and amino groups), thermal stability and fluorescent properties of TpPa-1 COF@CDs were characterized. The results showed that TpPa-1 COF@CDs exhibited a good detection and removal performance for Hg2+, which was evidenced by its high sensitivity (LOD = 0.75 μg L-1), superior selectivity, large adsorption capacity (235 mg g-1), fast adsorption rate (30 min equilibrium time) and good regeneration (at least five cycles). More importantly, the simple functional monomer, short reaction time and metal-free raw material made TpPa-1 COF@CDs reliable, cost effective and eco-friendly. This research demonstrated the facile construction of a functional covalent organic framework composite for water environmental remediation technologies of metal pollution.

A paper-based visualization chip based on nitrogen-doped carbon quantum dots nanoprobe for Hg(Ⅱ) detection

Hg(II) is one of the most toxic heavy metal ions. The bioconcentration and degradation-resistant of Hg(II) bring about serious harm to the ecosystem and humans. Therefore, the establishment of an accurate and effective method for detecting mercury ions is of great significance to environmental protection, food safety and human health. In this work, a new fluorescent nanoprobe was presented using nitrogen-doped carbon quantum dots (N-CQDs) for Hg(II) sensing with high stability and selectivity. On this basis, a paper-based chip was innovatively developed for visualization detection of Hg(II). The N-CQDs were prepared through a one-step hydrothermal reaction using catechol and ethylenediamine as carbon and nitrogen sources, respectively. As-prepared N-CQDs exhibit the strong green fluorescence at the excitation/emission wavelength of 370/511 nm. In aqueous solution, a rapid and highly sensitive detection method of Hg(II) was established by the joint of dynamic and static quenching effect of Hg(II) on N-CQDs fluorescence. Under the optimized conditions, there was a stable correlation between the fluorescence intensity change of N-CQDs and the concentrations of Hg(II) in the range of 15 ∼ 10⁴ nM, and the detection limit was down to 8 nM (S/N = 3). The recoveries of water, sorghum and rice were 91.60 to 102.46%, which was consistent with ICP-MS. More importantly, the N-CQDs nanoprobe was further integrated in nitrocellulose membrane to develop paper-based chip for Hg(II) visualization detection, and the detection performance was also excellent. This strategy had significant implications for achieving low-cost, on-site real-time monitoring of mercury (II) in the environment and food.

Preparation of fluorescent bimetallic silver/copper nanoparticles and their utility of dual-mode fluorimetric and colorimetric probe for Hg2

A dual-mode colorimetric and fluorimetric probe was successfully established based on silver/copper bimetallic nanoparticles (AgCu-BNPs). The AgCu-BNPs were confirmed as individually bimetallic nanoparticles with a mean size of 7.7 ± 0.2 nm, as characterized by high resolution transmission electron microscopy. Intriguingly, the AgCu-BNPs possess both surface plasmon resonances (SPR) and fluorescence emission. AgCu-BNPs emanate bright blue fluorescence with optical emission centered at 442 nm with high quantum yield of 30.3%, and AgCu-BNPs were attenuated or even quenched by Hg²⁺ via both static and dynamic quenching, coincidently accompanied by a visible color change, which endow AgCu-BNPs a unique utility as dual-mode colorimetric and fluorimetric probes. The detection limits as low as 89 nM and 9 nM were determined by dual-mode of AgCu-BNPs, respectively. The recovery rates in real samples were found to be 97.3-118.8%, and 89.5-112.7% by colorimetric and fluorescent methods separately, demonstrates the good environmental tolerance of the dual-mode probe.

A novel electrochemical biosensor for ultrasensitive Hg2+ detection via a triple signal amplification strategy

We developed a novel electrochemical biosensor for ultrasensitive Hg2+ detection via a triple signal amplification strategy of a DNA dual cycle, organic-inorganic hybrid nanoflowers (Cu3(PO4)2 HNFs) and gold nanoparticle (AuNP) probe. The DNA dual cycle was triggered by exonuclease III (Exo III) in the presence of Hg2+, and Cu3(PO4)2 HNFs were synthesized as an AuNP probe carrier. The electrochemical biosensor displayed high stability, high sensitivity and excellent specificity, which was improved by up to seven orders of magnitude compared to the World Health Organization (WHO) allowed Hg2+ levels in drinking water. This signal amplification strategy could be easily modified and extended to detect other hazardous heavy metals and nucleic acids.

Smart Biosensors for Cancer Diagnosis Based on Graphene Quantum Dots

The timely diagnosis of cancer represents the best chance to increase treatment success and to reduce cancer deaths. Nanomaterials-based biosensors containing graphene quantum dots (GQDs) as a sensing platform show great promise in the early and sensitive detection of cancer biomarkers, due to their unique chemical and physical properties, large surface area and ease of functionalization with different biomolecules able to recognize relevant cancer biomarkers. In this review, we report different advanced strategies for the synthesis and functionalization of GQDs with different agents able to selectively recognize and convert into a signal specific cancer biomarkers such as antigens, enzymes, hormones, proteins, cancer related byproducts, biomolecules exposed on the surface of cancer cells and changes in pH. The developed optical, electrochemical and chemiluminescent biosensors based on GQDs have been shown to ensure the effective diagnosis of several cancer diseases as well as the possibility to evaluate the effectiveness of anticancer therapy. The wide linear range of detection and low detection limits recorded for most of the reported biosensors highlight their great potential in clinics for the diagnosis and management of cancer.

Chitosan-based carbon nanoparticles as a heavy metal indicator and for wastewater treatment

Removal of heavy metal ions by carbon nanoparticles synthesized from chitosan.

Detecting Mercury (II) and Thiocyanate Using "Turn-on" Fluorescence of Graphene Quantum Dots

In this work, 1.8 nm graphene quantum dots (GQDs), exhibiting bright blue fluorescence, were prepared using a bottom-up synthesis from citric acid. The fluorescence of the GQDs could be almost completely quenched (about 96%) by adding Hg²⁺. Quenching was far less efficient with other similar heavy metals, Tl⁺, Pb²⁺ and Bi³⁺. Fluorescence could be near quantitatively restored through the introduction of thiocyanate. This "turn-on" fluorescence can thus be used to detect both or either environmental and physiological contaminants mercury and thiocyanate and could prove useful for the development of simple point-of-care diagnostics in the future. Graphical Abstract.

Glutathione Modified Fluorescent CdS QDs Synthesized Using Environmentally Benign Pathway for Detection of Mercury Ions in Aqueous Phase

An adept, rapid and novel water-soluble glutathione functionalized CdS quantum dots (GSH@CdS QDs) were fabricated using green pathway for sensing of heavy metal contamination prevalent in industrial wastewater. GSH@CdS QDs were facilely synthesized in an aqueous phase reaction and were effectively characterized using FT-IR, XRD, FESEM, HRTEM and EDX techniques. The distinct fluorescence characteristics of GSH@CdS QDs were explored and the QDs showed selective sensitivity towards mercury ions with a low limit of detection of 0.54 nM under optimal conditions. The detailed interaction between GSH@CdS QDs and Hg²⁺ and the probable fluorescence quenching mechanism were established in this study. In comparison to already reported fluorescent probes, GSH@CdS QDs showed high sensitivity, biocompatibility, long fluorescence stability and convenient removal of mercury ions. Graphical Abstract Facile green route for the fabrication of glutathione capped CdS quantum dots for fluorescence-based detection of toxic Hg²⁺ ions.

Polarizing Graphene Quantum Dots toward Long-Acting Intracellular Reactive Oxygen Species Evaluation and Tumor Detection

The evaluation of intracellular reactive oxygen species (ROS) would greatly deepen the understanding of cell metabolism/proliferation and tumor detection. However, current long-acting level tracking techniques for intracellular ROS remain unsuited to practical applications. To solve this problem, we synthesized cyclotriphosphazene-doped graphene quantum dots (C-GQDs) whose quantum yield is highly sensitive to ROS (increased by 400% from 0.12 to 0.63). Electron cloud polarization of oxidized cyclotriphosphazene rings in C-GQDs is confirmed to account for this novel optical property by density functional theory calculations and experimental results. In combination with excellent biological stability, C-GQDs achieve a long-acting evaluation of intracellular ROS level (more than 72 h) with an accuracy of 98.3%. In addition, recognition rates exceeding 90% are demonstrated to be feasible for eight kinds of tumor cell lines cultured with C-GQDs, which can also be expanded to in vivo detection. C-GQDs also show a high recognition rate (82.33%) and sensitivity (79.65%) for tumor cells in blood samples.

Development of Graphene Quantum Dots-Based Optical Sensor for Toxic Metal Ion Detection

About 71% of the Earth's surface is covered with water. Human beings, animals, and plants need water in order to survive. Therefore, it is one of the most important substances that exist on Earth. However, most of the water resources nowadays are insufficiently clean, since they are contaminated with toxic metal ions due to the improper disposal of pollutants into water through industrial and agricultural activities. These toxic metal ions need to be detected as fast as possible so that the situation will not become more critical and cause more harm in the future. Since then, numerous sensing methods have been proposed, including chemical and optical sensors that aim to detect these toxic metal ions. All of the researchers compete with each other to build sensors with the lowest limit of detection and high sensitivity and selectivity. Graphene quantum dots (GQDs) have emerged as a highly potential sensing material to incorporate with the developed sensors due to the advantages of GQDs. Several recent studies showed that GQDs, functionalized GQDs, and their composites were able to enhance the optical detection of metal ions. The aim of this paper is to review the existing, latest, and updated studies on optical sensing applications of GQDs-based materials toward toxic metal ions and future developments of an excellent GQDs-based SPR sensor as an alternative toxic metal ion sensor.

Graphene quantum dots unraveling: Green synthesis, characterization, radiolabeling with 99mTc, in vivo behavior and mutagenicity

Graphene is one of the crystalline forms of carbon, along with diamond, graphite, carbon nanotubes, and fullerenes, and is considered as a revolutionary and innovating product. The use of a graphene-based nanolabels is one of the latest and most prominent application of graphene, especially in the field of diagnosis and, recently, in loco radiotherapy when coupled with radioisotopes. However, its biological behavior and mutagenicity in different cell or animal models, as well as the in vivo functional activities, are still unrevealed. In this study we have developed by a green route of synthesizing graphene quantum dots (GQDs) and characterized them. We have also developed a methodology for direct radiolabeling of GQDs with radioisotopes.Finally; we have evaluated in vivo biological behavior of GQDs using two different mice models and tested in vitro mutagenicity of GQDs. The results have shown that GQDs were formed with a size range of 160-280 nm, which was confirmed by DRX and Raman spectroscopy analysis, corroborating that the green synthesis is an alternative, environmentally friendly way to produce graphene. The radiolabeling test has shown that stable radiolabeled GQDs can be produced with a high yield (>90%). The in vivo test has demonstrated a ubiquitous behavior when administered to healthy animals, with a high uptake by liver (>26%) and small intestine (>25%). Otherwise, in an inflammation/VEGF hyperexpression animal model (endometriosis), a very peculiar behavior of GQDs was observed, with a high uptake by kidneys (over 85%). The mutagenicity test has demonstrated A:T to G:C substitutions suggesting that GQDs exhibits mutagenic activity.

Graphene Quantum Dots in Electrochemical Sensors/Biosensors

Background:

Graphene and its derivatives, as most promising carbonic nanomaterials have been widely used in design and making electrochemical sensors and biosensors. Graphene quantum dots are one of the members of this family which have been mostly known as fluorescent nanomaterials and found extensive applications due to their remarkable optical properties. Quantum confinement and edge effects in their structures also cause extraordinary electrochemical properties.

Objective:

Recently, graphene quantum dots besides graphene oxides and reduced graphene oxides have been applied for modification of the electrodes too and exposed notable effects in electrochemical responses. Here, we are going to consider these significant effects through reviewing some of the recent published works.

Nitrogen doped graphene quantum dots as a fluorescent probe for mercury(II) ions

A highly selective fluorescent probe for Hg²⁺ is reported. It consists of nitrogen doped graphene quantum dots (NGQDs) that are nearly spherical in shape, have an average diameter of 2.7 nm and excitation-independent emission. The blue fluorescence of the NGQDs (with maximum excitation/emission at 378/447 nm) is quenched by Hg²⁺ due to both dynamic and static quenching. The probe has a wide detection range (2.5 μM - 800 μM) and a limit of detection of 2.5 μM. The dynamic and static quenching constants are 417 M^-1 and 63500 M^-1, respectively. The probe was used to quantfy Hg²⁺ in spiked real water samples with satisfactory results. Graphical abstract ᅟ.

Fluorescent Sensors for the Detection of Heavy Metal Ions in Aqueous Media

Due to the risks that water contamination implies for human health and environmental protection, monitoring the quality of water is a major concern of the present era. Therefore, in recent years several efforts have been dedicated to the development of fast, sensitive, and selective sensors for the detection of heavy metal ions. In particular, fluorescent sensors have gained in popularity due to their interesting features, such as high specificity, sensitivity, and reversibility. Thus, this review is devoted to the recent advances in fluorescent sensors for the monitoring of these contaminants, and special focus is placed on those devices based on fluorescent aptasensors, quantum dots, and organic dyes.

An eco-friendly imprinted polymer based on graphene quantum dots for fluorescent detection of p-nitroaniline

An eco-friendly fluorescent molecularly imprinted polymer anchored on the surface of graphene quantum dots (GQDs@MIP) was developed with an efficient sol–gel polymerization for highly sensitive and selective determination of p-nitroaniline (p-NA).

Pentaethylenehexamine and d-penicillamine co-functionalized graphene quantum dots for fluorescent detection of mercury(II) and glutathione and bioimaging

Pentaethylenehexamine and d-penicillamine co-functionalized graphene quantum dots (PEHA-GQD-DPA) was made via one two-step thermal pyrolysis. The resulting PEHA-GQD-DPA is composed of the graphene sheets with an average size of 3.16 nm and the rich of functional groups. It gives an ultra strong fluorescence emission with the fluorescent quantum yield of 90.91% and sensitive and selective optical response towards Hg²⁺. The fluorescence intensity linearly decreases with the increase of Hg²⁺ in the range of 1.0 × 10^-10-2 × 10^-4 M with the detection limit of 4.6 × 10^-11 M (S/N = 3). No species tested interfere with detection of Hg²⁺. The fluorescence quenched by Hg²⁺ can be well recovered by glutathione. The fluorescence intensity linearly increases with the increase of glutathione in the range of 5 × 10^-8-2.5 × 10^-6 M with the detection limit of 1.7 × 10^-8 M (S/N = 3). The PEHA-GQD-DPA as a fluorescence probe has been successfully applied in determination of Hg²⁺ in natural water and glutathione in human serum and SW480 cell imaging.

Graphitic carbon nitride quantum dots as an "off-on" fluorescent switch for determination of mercury(II) and sulfide

A rapid method has been developed for the determination of Hg(II) and sulfide by using graphitic carbon nitride quantum dots (g-CNQDs) as a fluorescent probe. The interaction between Hg(II) and g-CNQDs leads to the quenching of the blue g-CNQD fluorescence (with excitation/emission peaks at 390/450 nm). However, the fluorescence can be recovered after addition of sulfide such that the "turn-off" state is switched back to the "turn-on" state. The g-CNQDs were fully characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-vis absorption and fluorescence spectroscopy. Under the optimal experimental conditions, this probe is highly selective and sensitive to Hg(II). The linear response to Hg(II) extends from 0.20 to 21 μM with a detection limit of 3.3 nM. In addition, sulfide can be detected via the recovery of fluorescence. The linear response range for sulfide species is from 8.0 to 45 μM with a detection limit of 22 nM. The mechanism of the "turn-off-on" scheme is discussed. The methods have been applied to the analysis of spiked tap water, lake water and wastewater samples. Graphical abstract Schematic of an off-on fluorescent probe for mercury(II). The fluorescence of graphitic carbon nitride quantum dots (g-CNQDs) is quenched by Hg²⁺ but is recovered after reacting with S^2- as it can combine with Hg²⁺ on the surface of g-CNQDs.

Interband Absorption in Few-Layer Graphene Quantum Dots: Effect of Heavy Metals

Monolayer, bilayer, and trilayer graphene quantum dots (GQDs) with different binding abilities to elemental heavy metals (HMs: Cd, Hg, and Pb) were designed, and their electronic and optical properties were investigated theoretically to understand deeply the optical response under heavy metal exposure. To gain insight into the nature of interband absorption, we performed density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations for thickness-varying GQDs. We found that the interband absorption in GQDs can be efficiently tuned by controlling the thickness of GQDs to attain the desirable coloration of the interacting complex. We also show that the strength of the interaction between GQDs and Cd, Hg, and Pb is strongly dependent on the number of sp²-bonded layers. The results suggest that the thickness of GQDs plays an important role in governing the hybridization between locally-excited (LE) and charge-transfer (CT) states of the GQDs. Based on the partial density-of-states (DOS) analysis and in-depth knowledge of excited states, the mechanisms underlying the interband absorption are discussed. This study suggests that GQDs would show an improved sensing performance in the selective colorimetric detection of lead by the thickness control.

Graphene Quantum Dots and Enzyme-Coupled Biosensor for Highly Sensitive Determination of Hydrogen Peroxide and Glucose

In this paper, a simple and specific graphene quantum dots (GQDs)-based fluorescent biosensor adopted for the determination of glucose based on the combination of the enzyme-coupled method and fluorescence quenching mechanism is demonstrated. Glucose was oxidized by the enzyme glucose oxidase (GOx), forming hydrogen peroxide (H 2 O 2 ) via the catalysis by horseradish peroxidase (HRP). H 2 O 2 was then employed to oxidize phenol to quinone, which led to effective quenching effect in the GQDs⁻GOx⁻HRP⁻phenol system. By optimizing the reaction conditions of the GQDs-enzyme system, a linear relationship between the concentration of glucose and the fluorescence intensity over a range of 0.2⁻10 μ mol/L was obtained. The limit of detection for glucose is 0.08 μ mol/L. The present biosensor for the determination of glucose showed satisfactory reproducibility and accuracy in human serum samples. Since the enzymes have high specificity and unique affinity to the certain substance, the enzyme-coupled system promises a sensitive way for further detection of those chemicals which could be oxidized by enzymes and generated H 2 O 2 or glucose. GQDs and other fluorescent materials coupled with several enzymes can be applied to extensive sensing field.

Microwave assisted synthesis of doped carbon dots and their application as green and simple turn off-on fluorescent sensor for mercury (II) and iodide in environmental samples

A novel, green, facile and dual turn-off/on sensor for detection of Hg²⁺ and I^- was developed based on carbon dots. Carbon dots were synthesized from citric acid, urea, and thiourea by microwave-assisted method. The size of the carbon dots (CDs) was about 10 nm and the synthesized CDs showed a strong emission at 523 nm upon excitation at 416 nm. The fluorescence quantum yield was 19.2%. Mercury (II) quenched the fluorescence of carbon dots. This turn off sensor had linear response for Hg²⁺ over a concentration range from 0.1 to 20 µM with detection limit as low as 62 nM. The carbon dots/Hg²⁺ system was also used as a turn on sensor for detection of iodide. Linear concentration range for I^- was 0.1-10 µM with detection limit as low as 72 nM. The proposed method showed good sensitivity and selectivity with respect to interference ions. Finally, this system was successfully used for the detection of Hg²⁺ and I^- in tap, river and mineral waters and fish samples.

Interband transitions in closed-shell vacancy containing graphene quantum dots complexed with heavy metals

High-performance optical detection of toxic heavy metals by using graphene quantum dots (GQDs) requires a strong interaction between the metals and GQDs, which can be reached through artificial creation of vacancy-type defects in GQDs.

Recent progress in two-dimensional inorganic quantum dots

This review critically summarizes recent progress in the categories, synthetic routes, properties, functionalization and applications of 2D materials-based quantum dots (QDs).

Folic acid-functionalized graphene quantum dots with tunable fluorescence emission for cancer cell imaging and optical detection of Hg2+

Functional groups may alter the optical and electrical characteristics of graphene quantum dots and lead to unusual properties and related applications.

Aqueous synthesis of functionalized copper sulfide quantum dots as near-infrared luminescent probes for detection of Hg2+, Ag+ and Au3

Stable water-soluble copper sulfide(Cu2S) quantum dots(QDs) with near-infrared emission were synthesized using N-acetyl-L-cysteine(NAC) as a modifier in aqueous solution and nitrogen atmosphere at room temperature. The product was characterized by TEM, XRD, XPS, FT-IR, FL and UV-VIS spectrometers. Effects of preparation conditions such as pH values, the molar ratio of reactants, temperature, and metal ions on the fluorescence properties of Cu2S QDs were discussed. Under optimal conditions, the prepared Cu2S QDs with average diameter about 2-5 nm show a near-infrared emission at 770 nm with the excitation wavelength of 466 nm, and have a good detection sensitivity for ions of Hg2+, Ag+ and Au3+, based on the characteristic of fluorescence quenching. The fluorescence quenching mechanism was proposed via electron transfer with cation exchange, which based on the theory of Hard-Soft-Acid-Base (HSAB) and Ksp value of metal-sulfide.

Visual and sensitive fluorescent sensing for ultratrace mercury ions by perovskite quantum dots

Mercury ions sensing is an important issue for human health and environmental safety. A novel fluorescence nanosensor was designed for rapid visual detection of ultratrace mercury ions (Hg²⁺) by using CH₃NH₃PbBr₃ perovskite quantum dots (QDs) based on the surface ion-exchange mechanism. The synthesized CH₃NH₃PbBr₃ QDs can emitt intense green fluorescence with high quantum yield of 50.28%, and can be applied for Hg²⁺ sensing with the detection limit of 0.124 nM (24.87 ppt) in the range of 0 nM-100 nM. Furthermore, the interfering metal ions have no any influence on the fluorescence intensity of QDs, showing the perovskite QDs possess the high selectivity and sensitivity for Hg²⁺ detection. The sensing mechanism of perovskite QDs for Hg²⁺ is has also been investigated by XPS, EDX studies, showing Pb²⁺ on the surface of perovskite QDs has been partially replaced by Hg²⁺. Spot plate test shows that the perovskite QDs can also be used for visual detection of Hg²⁺. Our research indicated the perovskite QDs are promising candidates for the visual fluorescence detection of environmental micropollutants.

A modified fluorescein derivative with improved water-solubility for turn-on fluorescent determination of Hg2+ in aqueous and living cells

To improve the water-solubility of heavy-metal sensing materials, a modified fluorescein-based derivative, acryloyl fluorescein hydrazine (ACFH), was designed and developed by incorporating a non-hydrogen-bonding group into the conjugated molecule for weakening intermolecular hydrogen-bonding interactions. In neutral water environments, ACFH presented a fluorescence-enhancement performance at λ_max=512nm in the presence of Hg²⁺, which could be visualized by naked-eyes. Under the optimized conditions, the linear range of Hg²⁺ detection was 1.0-100×10^-9molL^-1 with a correlation coefficient of 0.9992 and a detection limit of 0.86×10^-9molL^-1. The recognition mechanism was confirmed to be a stable and irreversible 1:1 five-member ring complex between ACFH and Hg²⁺ with a coordination constant of 3.36×10⁹. ACFH would possess a potential application in detecting Hg²⁺ for biological assay with low cytotoxicity.

Graphene quantum dots coordinated to mercaptopyridine-substituted phthalocyanines: Characterization and application as fluorescence "turn ON" nanoprobes

This study reports on the design of novel nanoconjugates of graphene quantum dots (GQDs) and tetra or octa-mercaptopyridine-substituted zinc and aluminium phthalocyanines (Pcs) deployed as fluorescence "turn ON" nanoprobes. The phthalocyanines were separately adsorbed onto the planar structure of graphene quantum dots (GQDs) via π-π stacking interaction to form GQDs-mercaptopyridine Pcs nanoconjugates. The quaternized Pc complexes could also interact with the GQDs through electrostatic attraction due to the positive charges on the Pcs ring substituents and the negative charges on the surface of GQDs. The fluorescence emission of the GQDs was quenched upon coordination to the respective Pcs. However, the fluorescence emission was "turned ON" in the presence of Hg²⁺ employed as a test analyte. The mechanism of the "turn ON" of the GQDs emission in the nanoconjugates is ascribed to the strong affinity of Hg²⁺ to bind with the bridging sulfur on the Pcs periphery thereby disrupting the π-π stacking interaction between the GQDs and the Pcs with a consequent "turn ON" of the coordinated GQDs' fluorescence.

Self-exothermic reaction prompted synthesis of single-layered graphene quantum dots at room temperature

s-GQDs were prepared ultra-rapidly by an efficient self-exothermic reaction and can specifically bind with Al³⁺ to produce an AIEE effect.

Graphene quantum dots supported by graphene oxide as a sensitive fluorescence nanosensor for cytochrome c detection and intracellular imaging

A new class of Cyt c detection fluorescence sensor based on graphene quantum dots supported by graphene oxide has been facilely developed. The sensor shows a high sensitivity and selectivity for Cyt c detection, and further exhibits favorable intracellular imaging in A549 cells.

Application of graphene quantum dots functionalized with thymine and thymine-appended zinc phthalocyanine as novel photoluminescent nanoprobes

Thymine Zn phthalocyanine turned off the fluorescence of graphene quantum dots, which was subsequently turned on by Hg²⁺ for its sensitive detection.