A novel Schiff-base as a Cu(II) ion fluorescent sensor in aqueous solution

Novel Anthracene and Carbazole Based Aggregation Induced Enhanced Emission Active Schiff Base as a Selective Sensor for Cu2+ ions

In present work our group has synthesized two novel Schiff-bases, Di-Carbazole based Schiff-base (DB-1) and Di-Anthracene based Schiff-base (DB-2) using condensation reaction and characterized thorough different spectroscopic techniques such as mass spectrometry, IR spectroscopy, 1H and 13C NMR spectroscopy. Furthermore, the AIE(Aggregation induced emission) studies were done using water-THF mixture. As compared to pure THF, the DB-2 showed a 17.8-fold increase in fluorescence intensity with a bathochromic shift of 64 nm in 80% water: THF mixture. For DB-1increase was seen at 70% water-THF combination. The analysis of the dynamic light scattering (DLS) further supported this excellent AIEE (Aggregation induced enhanced emission) characteristic. Furthermore, the spectrofluorometric techniques were used to examine the capacity of both Schiff bases to detect the heavy metals. It was discovered that only DB-1, with a detection limit of 2.4 × 10-8 M, was selective for the Cu2+ ion, whereas DB-2 had no sensing capability for metal ions. The Job's plot was used to determine the stoichiometry ratio of the DB-1 with Cu2+ to further examine the process. It was discovered that the ratio was 1:1 (DB-1:Cu2+). Additionally, the association constant of DB-1 for Cu2+ was 5.1 × 1011 M-1, demonstrating the excellent binding affinity of DB-1 for the Cu2+ ion.

Ligands as copper and nickel ionophores: Applications and implications on wastewater treatment

Modern society depends on many finite natural resources, from which metals are of great importance. Copper and nickel's relevance is due to their vast applications, resulting in high market value and demand. As such, their polluting emissions are also significant and their removal from wastewaters is imperative. Moreover, effluent treatment techniques can be used to recover the metallic cations, via selective processes. In this review, copper and nickel selective ligands in the literature are surveyed. These are most commonly Schiff bases, along with crown ethers and porphyrins. They are usually employed in ion sensing (colorimetric chemosensors or electrodes) with great success - the disruption in response of colorimetric sensors is up to 7% and binding constants are usually at least one order of magnitude greater with the desired cation than with interferents. However, modified adsorbents are also reported. The possibilities of using ionophores in wastewater cleaning, allowing the treatment of effluents and the selective recovery of valuable materials, and their implications on new green policies is discussed.

Highly efficient detection of Cu2+ and B4 O7 2- based on a recyclable asymmetric salamo-based probe in aqueous medium

An asymmetric salamo-based probe molecule (H₂ L) was synthesized and characterized structurally. When DMF/H₂ O (9:1) was used as the solvent, it was shown probe H₂ L has high sensitivity to Cu²⁺ . Using high-resolution mass spectrometry and theoretical calculation, it was found that probe H₂ L could form a more stable complex (1:1) with Cu²⁺ , the minimum limit of detection (LOD) of H₂ L for Cu²⁺ was calculated as 9.95 × 10^-8 M. In addition, probe H₂ L could also be used to identify B₄ O₇ ^2- under the same detection conditions and the minimum LOD of H₂ L for B₄ O₇ ^2- was calculated as 4.98 × 10^-7 M. At the same time, density functional theory theoretical calculation further proved the flexibility of probe H₂ L. Through the action of EDTA, probe H₂ L had a cyclic ability to recognize Cu²⁺ , and showed a better response in the physiological pH range; probe H₂ L had the characteristics of fast recognition speed and high efficiency. In addition, with probe H₂ L test paper for Cu²⁺ and B₄ O₇ ^2- , the effect was more obvious. Meanwhile, probe H₂ L can be used to quantitatively detect Cu²⁺ in water samples.

Study on the photochromism, photochromic fluorescence switch, fluorescent and colorimetric sensing for Cu2+ of naphthopyran-diaminomaleonitrile dyad and recognition Cu2+ in living cells

A well-designed naphthopyran-diaminomaleonitrile dyad (sensor 1) has been synthesized successfully, its molecular structure was well characterized by NMR and mass spectrometry. Sensor 1 exhibits excellent photochromic and photochromic fluorescence switch performance with reversible color change and good fatigue resistance upon alternating ultraviolet irradiation and thermal bleaching. In addition, sensor 1 displayed excellent fluorescent and colorimetric sensing ability towards Cu²⁺ ions with high selectivity and sensitivity. The addition of 5.0 equiv. of Cu²⁺ ions into sensor 1 (1 × 10^-5) in CH₃CN solution significantly quenched the fluorescence of sensor 1 by 80.0%. Furthermore, the addition of Cu²⁺ ions also caused the complete disappearance of the absorbance band at 350-450 nm in absorbance spectra of sensor 1 and accompanied by the distinct color change form yellow to colorless. Job's plot, mass spectrometry, ¹H NMR titration and DFT calculations proved that sensing performance was attributed to the formation of 1:1 sensor 1-Cu²⁺complexes. Sensor 1 can monitor the existence of Cu²⁺ ions in living cells via the fluorescence images. Sensor 1 showed great potential applications as chemosensor and photochromic materials.

Sequential displacement strategy for selective and highly sensitive detection of Zn2+, Hg2+ and S2- ions: An approach toward a molecular keypad lock

A thiocarbonohydrazone locked salicylidene based macrocycle ligand L has been synthesized and its ion sensing properties were examined by UV-visible and fluorescence spectroscopy. The macrocycle serves as a highly selective colorimetric sensor for Hg²⁺ ions while it acts as an excellent fluorescent sensor for Zn²⁺ ions by exhibiting a green fluorescence at 498 nm even in the presence of interfering ions. A detailed analysis of binding characteristics such as complex stoichiometry, association constant and detection limits of L toward Hg²⁺ and Zn²⁺ ions were evaluated by UV-visible and fluorescence experiments which revealed a stronger binding affinity and higher detection limit of L toward the mercury ions. Further, the sequential displacement strategy for the chromofluorogenic detection of Zn²⁺, Hg²⁺ and S^2- ions by ligand L, has been studied comprehensively. Finally, the ion-responsive fluorescence output signal of L were employed to design a molecular keypad lock which could be accessible by two users having two different set of chemical passwords (inputs) through distinguishable optical trajectories.

A new high selective and sensitive turn-on fluorescent and ratiometric absorption chemosensor for Cu2+ based on benzimidazole in aqueous solution and its application in live cell

A new benzimidazole base turn-on fluorescent and ratiometric absorption chemosensor (L) bearing bidentate ligand for detection of Cu²⁺ was designed and synthesized. Fluorescence and UV-vis spectra studies demonstrated that L can detect Cu²⁺ ions in aqueous solution using fluorescence enhancement and ratiometric absorption sensing over a wide pH range. Both fluorescent and ratiometric absorption sensing of L for Cu²⁺ possessed high selectivity and sensitivity over other competitive metal ions and had low detection limit. Job's plot, mass spectra and DFT calculation indicated the sensing mechanism is the complex formation between L and Cu²⁺ with 1:2 stoichiometry. Fluorescence images of HepG2 in the absence and presence of Cu²⁺ displayed L had cell permeability and detection ability for Cu²⁺ in live cells.

All Organic Label-like Copper(II) Ions Fluorescent Film Sensors with High Sensitivity and Stretchability

Deep learning and analysis of heavy metal concentration are very crucial to our life, for it plays an essential role in both environmental and human health. In this paper, we developed a new Cu (II) ions sensor made by all organic material with bending and stretching properties. The new sensor consists of chlorophyll-a extracted from fresh leaves of Common Garcinia, plant fiber and with the use of PDMS as a substrate. Fluorescence spectra study shows that chlorophyll-a is significantly much more sensitive to Cu (II) ions than any other heavy metal ions and the device sensitivity outperforms all the Cu (II) ions sensors ever reported. The result fully shows the selectivity of chlorophyll-a toward Cu (II) ions. Bending and stretching tests show that the sensor has an outstanding durability, which can be used to develop accompanying applications, such as real-time sampling and the analysis of Cu (II) concentration specified in athlete's sweat or patients with brain death and Parkinson's disease.

Ultrasensitive and highly selective detection of Cu2+ ions based on a new carbazole-Schiff

A new chemosensor for Cu²⁺ based on Schiff base with high sensitivity and selectivity was designed and synthesized. The fluorescence intensity of the chemosensor in CH₃CN solution was enhanced 160-fold after the addition of 10 equiv. Cu²⁺ over other metal ions. In addition, it also facilitates colorimetric detection for Cu²⁺ in CH₃CN solution. The chemosensor displayed low detection limit and fast response time to Cu²⁺.

Fluorimetric detection of Sn(2+) ion in aqueous medium using Salicylaldehyde based nanoparticles and application to natural samples analysis

The fluorescent 2-[(E)-(2-phenylhydrazinylidene)methyl]phenol nanoparticles (PHPNPs) were prepared by a simple reprecipitation method. The prepared PHPNPs examined by Dynamic Light Scattering show narrower particle size distribution having an average particle size of 93.3nm. The Scanning Electron Microphotograph shows distinct spherical shaped morphology of nanoparticles. The blue shift in UV-absorption and fluorescence spectra of PHPNPs with respect to corresponding spectra of PHP in acetone solution indicates H- aggregates and Aggregation Induced Enhanced Emission (AIEE) for nanoparticles. The nanoparticles show selective tendency towards the recognition of Sn(2+) ions by enhancing the fluorescence intensity preference to Cu(2+), Fe(3+), Fe(2+), Ni(2+), NH4(+), Ca(2+), Pb(2+), Hg(2+) and Zn(2+) ions, which actually seem to quench the fluorescence of nanoparticles. The studies on Langmuir adsorption plot, fluorescence lifetime of PHPNPs, DLS-Zeta sizer, UV-visible and fluorescence titration with and without Sn(2+) helped to propose a suitable mechanism of fluorescence enhancement of nanoparticles by Sn(2+) and their binding ability during complexation. The fluorescence enhancement effect of PHPNPs induced by Sn(2+) is further used to develop an analytical method for detection of Sn(2+) from aqueous medium in environmental samples.

Exploration of an easily synthesized fluorescent probe for detecting copper in aqueous samples

Bonding behavior and spectral response studies of an easily synthesized fluorescent probe for the detection of Cu²⁺ ions and CuO NPs in aqueous samples.

Chromo/Fluorogenic Detection of Co(2+), Hg(2+) and Cu(2+) by the Simple Schiff Base Sensor

Herein, we reported the ditriazole Schiff base derivative 1 and evaluated its photophysical properties on induction of varieties of metal ions including Na(+), Ag(+), Ni(2+), Mn(2+), Pd(2+), Co(2+), Hg(2+), Cu(2+), Pb(2+), Cd(2+), Zn(2+), Sn(2+), Fe(2+), Fe(3+), Cr(3+) and Al(3+), in order to figure out its potential as ion sensor. The ligand 1 exhibited the strong colorimetric change in the reaction solution as well as absorption spectral shifting with the concomitant appearance of well-defined isosbestic points only upon Co(2+), Hg(2+) and Cu(2+) addition corroborates its applicability as multichannel ion detector. The different extent of spectral shifting as well as unique chromogenic change in the probe solution upon Co(2+), Hg(2+) and Cu(2+) introduction can be used as the discrimination tool for these metal ions. The ligand-metal binding stoichiometry was assessed by their optical response which was further supported by the FT-IR, NMR and mass spectrometric analysis. The association constant and the detection limits of the ligand toward Co(2+), Hg(2+) and Cu(2+) ions were calculated to be 1.52 × 10(-8), 3.26 × 10(-9), 1.16 × 10(-8) and 3.87 × 10(-10), 5.47 × 10(-11), 8.91 × 10(-11) M, respectively, employing the Benesi-Hilderbrand equation and 3 σ slope(-1) methods. Furthermore, the successive addition of Co(2+), Hg(2+) and Cu(2+) induce the constant decline in the fluorescence emission signal intensity of the probe. The quenching efficiency of the probe upon metallic induction was fitted to the Stern-Volmer equation which yielded the upward curvature in case of all the three metals ions (Co(2+), Hg(2+) and Cu(2+)) when (Io/I-1) was plotted against the quencher concentration indicating the occurrence of both the dynamic and static quenching process in the system with the average Stern-Volmer quenching constant values of 9.25 × 10(-7), 1.14 × 10(-7), 1.829 × 10(-7), respectively.