A "turn-on" fluorescent chemosensor for aluminum ion and cell imaging application

Solvent-Selective Fluorescence Sensing of Mg2+ and Al3+ Ions by Pincer-Type NNO Schiff Base Ligand: An Experimental and DFT Optimized Approach

A newly developed dual-functional fluorescence sensing probe (phenylhydrazinyl pyridine) Schiff base (SB) has been designed with good selectivity for distinguishing Mg2+ and Al3+ metal ions in different solvent solutions. SB exhibits quick and visual turn-on fluorescence enhancement in response to Mg2+ and Al3+ detection. The addition of Mg2+ in ACN-HEPES buffer (1 : 1, v/v, pH 7.2) at (λmax=390 nm) and Al3+ in MeOH-HEPES buffer (1 : 1, v/v, pH 7.2) at (λmax=360 nm) resulted in significant enhancement of fluorescence, up to 7-9 times. These low detection limits of 7.1×10-6 M (7.1 μM) and 5.15×10-7 M (0.51 μM) for Mg2+ and Al3+, respectively, have been achieved by this solvent-controlled platform. Due to the sensing potential towards Mg2+, the probe was utilized as an imaging material for breast cancer cells. 1H-NMR studies were utilized to explore SB's sensing mechanism through turn-on fluorescence. Density functional theory (DFT) calculations were utilized to validate optimized SB and its intricate geometries, which govern the sensing mechanism in the solvent environment. Such a probe has extensive potential applications in bioimaging and the assessment of the quality of wastewater.

Roles of ESIPT and TICT in the Photophysical Process of a Ratiometric Fluorescence Sensor for Al3

Precise detection of Al3+ with the aid of a fluorescence sensor is of fundamental importance in the fields of water pollution control and food safety. A comprehensive understanding of the photophysical process of the sensor as well as its underlying detection mechanism is a precondition for the design of highly efficient sensors. This contribution performs a thorough investigation of the ratiometric fluorescence sensing mechanism of an Al3+ sensor with the aid of density functional theory and time-dependent density functional theory. Two excited-state intramolecular proton transfer (ESIPT) processes are observed on the S1 state potential energy surface, which leads to emission around 565 nm. A twisted intramolecular charge transfer state is observed after one of the ESIPT processes via cis-trans isomerization of the C═N bond. However, the large energy barrier hinders its occurrence, which is quite unusual. Al3+ is found to form three strong coordination bonds with the sensor, which eliminates ESIPT processes and induces a significant blue shift of the emission spectrum to 480 nm. The origination of the sensor's selectivity is also uncovered by investigating the interaction between the sensor and interfering metal ions.

A highly selective coumarin-based chemosensor for dual sensing of Cu2+ and Zn2+ ions with logic gate integration and live cell imaging

In this paper, a coumarin-based Schiff base chemosensor has been synthesized and developed to detect Cu2+ and Zn2+ ions in nanomolar concentrations. The probe selectively distinguishes Cu2+ and Zn2+ from among several metal ions in DMF : H2O (7 : 3, v/v, pH 7.4) HEPES buffer. The structure of the probe and its sensing behavior were investigated by FT-IR, UV-vis, fluorescence, HRMS, and NMR analyses, along with X-ray crystallography and computational studies. CIH detects Zn2+ and Cu2+ using different strategies: CHEF-induced fluorescence enhancement and paramagnetic fluorescence quenching, respectively. Job's plots show a 1 : 1 binding interaction between CIH and Cu2+ or Zn2+ ions. The binding constant values for Cu2+ (1.237 × 105 M-1) and Zn2+ (1.24 × 104 M-1) suggest a better ability for Cu2+ to interact with CIH than Zn2+. An extremely high sensitivity of the probe was highlighted by its very low detection limits (LOD) of 5.36 nM for Cu2+ and 3.49 nM for Zn2+. The regeneration of the probe with the addition of EDTA in its complexes allows the formation of molecular logic gates. CIH has been successfully employed in mitotracking and intracellular detection of Zn2+ and Cu2+ in SiHa cells.

A portable and intelligent logic detector for simultaneous and in-situ detection of Al3+ and fluoride in groundwater

To develop a convenient and intelligent detector for simultaneous and in-situ detection of Al³⁺ and F^- in groundwater, a novel organic probe called RBP has been prepared. With the increase of Al³⁺, RBP showed a significant fluorescence enhancement at 588 nm, and the detection limit was 0.130 mg/L. After combining with fluorescent internal standard CDs, the fluorescence of RBP-Al-CDs at 588 nm was quenched due to the replace of F^- for Al³⁺, while the CDs at 460 nm remained unchanged, and the detection limit was 0.0186 mg/L. For convenient and intelligent detection, an RBP-based logic detector has been developed for simultaneous detection of Al³⁺ and F^-. Within the ultra-trace, low concentration, and high concentration range of Al³⁺ and F^-, the logic detector can achieve rapid feedback on their concentration levels ("U", "L" and "H") through different output modes of the signal lamps. The development of logical detector is of great significance for studying the in-situ chemical behavior of Al³⁺ and F^- and for daily household detection.

Discriminative 'Turn-on' Detection of Al3+ and Ga3+ Ions as Well as Aspartic Acid by Two Fluorescent Chemosensors

In this work, two Schiff-base-based chemosensors L1 and L2 containing electron-rich quinoline and anthracene rings were designed. L1 is AIEE active in a MeOH-H₂O solvent system while formed aggregates as confirmed by the DLS measurements and fluorescence lifetime studies. The chemosensor L1 was used for the sensitive, selective, and reversible 'turn-on' detection of Al³⁺ and Ga³⁺ ions as well as Aspartic Acid (Asp). Chemosensor L2, an isomer of L1, was able to selectively detect Ga³⁺ ion even in the presence of Al³⁺ ions and thus was able to discriminate between the two ions. The binding mode of chemosensors with analytes was substantiated through a combination of ¹H NMR spectra, mass spectra, and DFT studies. The 'turn-on' nature of fluorescence sensing by the two chemosensors enabled the development of colorimetric detection, filter-paper-based test strips, and polystyrene film-based detection techniques.

Trace-Level Humidity Sensing from Commercial Organic Solvents and Food Products by an AIE/ESIPT-Triggered Piezochromic Luminogen and ppb-Level "OFF-ON-OFF" Sensing of Cu2+: A Combined Experimental and Theoretical Outcome

Selective and sensitive moisture sensors have attracted immense attention due to their ability to monitor the humidity content in industrial solvents, food products, etc., for regulating industrial safety management. Herein, a hydroxy naphthaldehyde-based piezochromic luminogen, namely, 1-{[(2-hydroxyphenyl)imino]methyl}naphthalen-2-ol (NAP-1), has been synthesized and its photophysical and molecular sensing properties have been investigated by means of various spectroscopic tools. Owing to the synergistic effect of both aggregation-induced emission (AIE) and excited-state intramolecular proton transfer (ESIPT) along with the restriction of C=N isomerization, the probe shows bright yellowish-green-colored keto emission with high quantum yield after the interaction with a trace amount of water. This makes NAP-1 a potential sensor for monitoring water content in the industrial solvents with very low detection limits of 0.033, 0.032, 0.034, and 0.033% (v/v) from tetrahydrofuran (THF), acetone, dimethyl sulfoxide (DMSO), and methanol, respectively. The probe could be used in the food industry to detect trace moisture in the raw food samples. The reversible switching behavior of NAP-1 makes it suitable for designing an INHIBIT logic gate with an additional application in inkless writing. In addition, an Internet of Things-(IoT) based prototype device has been proposed for on-site monitoring of the moisture content by a smartphone via Bluetooth or Wi-Fi. The aggregated probe also has the ability to recognize Cu²⁺ from a purely aqueous medium via the chelation-enhanced quenching (CHEQ) mechanism, leading to ∼84% fluorescence quenching with a Stern-Volmer quenching constant of 1.46 × 10⁴ M^-1 and with an appreciably low detection threshold of 57.2 ppb, far below than recommended by the World Health Organization (WHO) and the United States Environmental Protection Agency (U.S. EPA). The spectroscopic and theoretical calculations (density functional theory (DFT), time-dependent DFT (TD-DFT), and natural bond orbital (NBO) analysis) further empower the understanding of the mechanistic course of the interaction of the host-guest recognition event.

Theoretical Investigations on the Excited-State Dynamics of an Al3+ Fluorescence Sensor

Twisted internal charge transfer (TICT) states are of fundamental importance during the photo-physical processes of dyes and sensors. In this contribution, excited-state dynamics of an Al³⁺ fluorescence sensor 1-{[(2-hydroxyphenyl)-imino]methyl}naphthalen-2-ol based on the turn-on signal is clarified. Two different dark TICT states are observed by exploring the excited-state potential energy surface. With the twist of the C2-N bond, the two dark states can be reached facilely, which induce the experimentally observed weak fluorescence of the sensor. The sensing mechanism is then uncovered by investigating the electronic coupling between the sensor and analyte. Al³⁺ is proved to form strong coordination bonds with the sensor, which restricts the motion of the C2-N bond. Consequently, the TICT states are eliminated, which generate the turn-on signal. This sensing mechanism is trustworthy and intrinsically different from the previously proposed one, which would shed some light on the design of turn-on sensors.

Exploring the Effects of Various Polymeric Backbones on the Performance of a Hydroxyaromatic 1,2,3-Triazole Anion Sensor

Polymeric chemosensors are vital sensing tools because of higher sensitivity compared to their monomeric counterparts and tunable mechanical properties. This study focuses on the incorporation of a hydroxyaromatic 1,2,3-triazole sensor, 2-(4-phenyl 1H-1,2,3-triazol-1-yl)phenol (PTP), into polymers. By itself, the triazole has a selective, fluorometric response to the fluoride, acetate, and dihydrogen phosphate anions, and is most responsive to fluoride. Current investigations probe the suitability of various polymeric backbones for the retention and enhancement of the triazole’s sensing capabilities. Backbones derived from acrylic acid, methyl methacrylate, divinylbenzene, and styrene were explored. UV-illumination, Nuclear Magnetic Resonance (NMR) titration, and ultraviolet-visible (UV-Vis) absorption and fluorescence spectroscopy studies are used to investigate the performance of newly synthesized polymers and the derivatives of PTP that serve as the polymers’ precursors. Among the polymers investigated, copolymers with styrene proved best; these systems retained the sensing capabilities and were amenable to tuning for sensitivity.

A novel pyrazole bearing imidazole frame as ratiometric fluorescent chemosensor for Al3+/Fe3+ ions and its application in HeLa cell imaging

New pyrazole bearing imidazole derivative was successfully synthesized and thoroughly characterized by various spectroanalytical techniques. The sensor DIBI shows a highly selective and sensitive fluorescent response with the addition of Al³⁺/Fe³⁺ ions in acetonitrile-water mixture. The strong fluorescent molecule exhibits a notable ratiometric emissions at 462 nm and 470 nm for Al³⁺ and Fe³⁺ ions, respectively (λ_ex = 280 nm). Job's plot studies conclude that the coordination between DIBI with Al³⁺/Fe³⁺ was 1:1 binding stoichiometry. The limit of detection of DIBI with Al³⁺/Fe³⁺ was calculated as 2.12 × 10^-7 M and 1.73 × 10^-6 M, respectively. The TD-DFT calculations further supported the photonics performances of the free probe and its complexes. The reversibility and reusability of the sensor molecule are studied using EDTA. The probe was used to track Al³⁺/Fe³⁺ in cancer cells via fluorescence microscopy.

A Quinoline-Appended Cyclodextrin Derivative as a Highly Selective Receptor and Colorimetric Probe for Nucleotides

The design and development of specific recognition and sensing systems for biologically important anionic species has received growing attention in recent years, as they play significant roles in biology, pharmacy, and environmental sciences. Herein, a new supramolecular sensing probe L1 was developed for highly selective differentiation of nucleotides. L1 displayed extremely marked absorption and emission differentiation upon binding with nucleotide homologs of AMP, ADP, and ATP, due to the divergent spatial orientations of guests upon binding, which allowed for a naked-eye colorimetric differentiation for nucleotides. A differentiating mechanism was unambiguously rationalized by using various spectroscopic studies and theoretical calculations. Furthermore, we successfully demonstrated that L1 can be applied to the real-time monitoring of the enzyme-catalyzed phosphorylation/dephosphorylation processes and thus demonstrated an unprecedented visualizable strategy for selectively differentiating the structurally similar nucleotides and real-time monitoring of biological processes via fluorescent and colorimetric changes.

Dual sensing and synchronous fluorescence spectroscopic monitoring of Cr3+and Al3+ using a luminescent Schiff base: Extraction and DFT studies

A well designed, new pyrene based small molecule (L) was synthesized from 1:1 condensation reaction of 1-aminopyrene and 6-(1,3-benzodioxal-5-yl)-2-pyridine carboxaldehyde which was characterized by absorption, emission spectrometry, FTIR, NMR and mass studies. Interestingly the UV-vis and fluorescence spectroscopic studies revealed that the ligand (L) works as a dual turn-on luminescent chemosensor for chromium(III) (Cr³⁺) and aluminium(III) (Al³⁺) in aqueous environment which were further supported by DFT and TDDFT studies. L shows a significant colour change from pale yellow to reddish yellow with a detection limit of ~10^-9 M in the presence of Cr³⁺ and Al³⁺ whereas there were no noteworthy changes in the presence of other monovalent and divalent metal ions. The molecular signaling in the presence of Cr³⁺, Al³⁺, Fe³⁺ and EDTA was compared with advanced level combinational INHIBIT gate based on 4 input logic gates. Herein, first derivative constant wavelength synchronous fluorescence spectroscopy (1^st DCWSFS) was applied for the determination of Cr³⁺, Al³⁺ ion concentrations in a mixture via increment of spectral resolution of the respective overlapping peaks. 1^st DCWSFS is reported to be used in pharmaceuticals but very few works have been done for determination of metal ion concentration in environmental sample without prior separation. The individual Cr³⁺and Al³⁺ ion concentrations in a mixture were determined through liquid-liquid extraction process and the efficiencies were compared with 1^st derivative SFS method. It was observed that 1^st derivative SFS process is more efficient than conventional liquid-liquid extraction process. Therefore, 1^st DCWSFS method using sensor L might be useful as a diagnostic tool for detection of individual metal ion concentrations (Cr³⁺ and Al³⁺) from a mixture which will be cost-effective, time saving and more precise.

A novel OFF-ON-OFF fluorescence probe based on coumarin for Al3+ and F- detection and bioimaging in living cells

A novel fluorescence probe L2 based on coumarin has been designed and synthesized. The probe L2 can be used for relay recognition of metal ions Al³⁺ and anion F^- in the aqueous HEPES buffer (0.05 M, pH = 7.4), and build a OFF-ON-OFF detection system. The probe showed high selectivity and sensitivity to target ions in the process of relay recognition, and the corresponding detection limit could be as low as 0.014 μM (Al³⁺) and 0.03 μM (F^-). Besides, the geometry optimizations of probe L2 and [L2 + Al³⁺] complex were carried out using the Gaussian 16 program based on DFT, and the identification mechanism of the probe was also discussed by the mass spectrometry and theoretical calculations. Moreover, the probe has also been successfully applied to detection of target ions in living cells.

A New “Turn-On” Fluorescence Probe for Al3+ Detection and Application Exploring in Living Cell and Real Samples

An excess of Al3+ will lead to biological disorders and even many diseases. Therefore, detecting the levels of Al3+ in the human body has drawn great attention for health monitoring. The fluorescence method has been broadly applied because of high sensitivity, real-time detection, and intracellular imaging. In this work, a new probe with “turn-on” fluorescence based on Schiff base derivative, 3,6-imine-triphenylamine-(9-ethyl) carbazole (ITEC), has been successfully synthesized and studied. The high selectivity and sensitivity of ITEC to Al3+ were verified by fluorescence spectra and the detection limit was 2.19 nmol/L. A 1:2 stoichiometry of ITEC-Al3+ was obtained by the 1H NMR spectra and Job’s plot. Furthermore, ITEC was successfully applied to the detection of Al3+ with different concentrations in living HeLa cells. The analog experiments about nature contamination of Al3+ in cells and real samples were finished.

New rhodamine B-based chromo-fluorogenic probes for highly selective detection of aluminium(iii) ions and their application in living cell imaging

Two rhodamine B-based fluorescent probes, BOS1 and BOS2, were designed and synthesized with good yields via the condensation reactions between the o-diaminobenzene modified rhodamine core structure (RBO) and salicylaldehyde derivatives. Both the probes exhibited remarkable absorbance-on and fluorescence-on responses to Al³⁺ over other metal ions in ethanol–water (1 : 9, v/v) medium via the rhodamine ring-opening approach, which can be used for “naked-eye” Al³⁺ detection over a broad pH range (5–9). The fluorescence intensities of the probes were linear with the Al³⁺ ion concentration, resulting in a low limit of detection of 1.839 μM (BOS1) and 1.374 μM (BOS2) for Al³⁺. In addition, the MTT assays and cell imaging experiments of Al³⁺ in SGC-7901 living cells demonstrated that the probes had negligible cytotoxicity, and were cell permeable and suitable for sensing Al³⁺ in biological systems.

Two rhodamine B-based fluorescent probes exhibited remarkable absorbance-on and fluorescence-on responses to Al³⁺, which can be used for biological imaging.

A new fluorescent and colorimetric chemosensor for Al3+ and F−/CN− based on a julolidine unit and its bioimaging in living cells

A novel multifunctional chemosensor HL bearing a julolidine unit and a Schiff base unit has been synthesized. As a fluorescent sensor, HL exhibited excellent selectivity and high sensitivity to Al³⁺ and F⁻/CN⁻ with a low detection limit in acetonitrile. Moreover, HL also showed good colorimetric selectivity to F⁻/CN⁻; a solution color change from colorless to light yellow in acetonitrile was observed by the ‘naked-eye’. The properties of HL with Al³⁺ and F⁻/CN⁻ were studied by UV-vis absorption spectroscopy, fluorescence spectroscopy, high-resolution mass spectrometry and ¹H NMR titration. Furthermore, the cell imaging experimental results indicated that the chemosensor HL could be applied for the detection of Al³⁺ in living cells.

A novel multifunctional chemosensor HL bearing a julolidine unit and a Schiff base unit has been synthesized.

A metal–organic framework as a “turn on” fluorescent sensor for aluminum ions

A new three-dimensional (3D) metal–organic framework exhibits high sensitivity and selectivity for Al³⁺ ions as a “turn on” fluorescent sensor.