Synthesis of a single 1,8-naphthalimide fluorophore as a molecular logic lab for simultaneously detecting of Fe3+, Hg2+ and Cu2

A terpyridyl-rhodamine hybrid fluorescent probe for discriminative sensing of Hg (II) and Cu (II) in water and applications for molecular logic gate and cell imaging

Sensitive and discriminative sensing of more than one analyte with a single fluorescent probe is significant and challenging. Herein a new terpyridyl-rhodamine hybrid, namely TRH, has been rationally designed and prepared with two responsive groups in the molecular structure, which facilitate the discriminative detection of Hg2+ and Cu2+ ions in water with detection limits of 4.9 and 53.3 nM by ratiometric fluorescence change (F595/F485) and fluorescence quenching, respectively. Investigations show that the selectivity to Hg2+ ions can be attributed to Hg2+-promoted spirolactam ring opening and further hydrolysis, followed by a through-bond energy transfer (TBET) process. The selective fluorescence quenching to Cu2+ ions probably can be ascribed to the binding Cu2+ to terpyridyl that triggers a ligand-to-metal charge transfer (LMCT) process, which can also efficiently inhibit the TBET process induced by Hg2+ ions and promotes the discriminative sensing of Cu (II) and Hg (II). In addition, the fluorescent responses to Hg2+ and Cu2+ ions cover a wide pH range. Moreover, a combinatorial logic gate with the functions of NOR and INHIBIT has been fabricated by using Hg2+ and Cu2+ ions as chemical input signals, and fluorescence at 485 and 595 nm as output signals. Besides, TRH also exhibits sensitive and discriminative sensing ability to Hg2+ and Cu2+ ions by the fluorescence of rhodamine fluorophore. Significantly, based on the fluorescence signal output of rhodamine moiety, TRH can be used as a tracer for the discriminative sensing of Hg2+ and Cu2+ ions by using living cells.

New Water-Soluble Poly(propylene imine) Dendrimer Modified with 4-Sulfo-1,8-naphthalimide Units: Sensing Properties and Logic Gates Mimicking

A new water-soluble poly(propylene imine) dendrimer (PPI) modified with 4-sulfo-1,8-naphthalimid units (SNID) and its related structure monomer analog (SNIM) has been prepared by a simple synthesis. The aqueous solution of the monomer exhibited aggregation-induced emission (AIE) at 395 nm, while the dendrimer emitted at 470 nm due to an excimer formation beside the AIE at 395 nm. Fluorescence emission of the aqueous solution of either SNIM or SNID was significantly affected by traces of different miscible organic solvents, and the limits of detection were found to be less than 0.05% (v/v). Moreover, SNID exhibited the function to execute molecular size-based logic gates where it mimics XNOR and INHIBIT logic gates using water and ethanol as inputs and the AIE/excimer emissions as outputs. Hence, the concomitant execution of both XNOR and INHIBIT enables SNID to mimic digital comparators.

Design and Synthesis of a Novel ICT Bichromophoric pH Sensing System Based on 1,8-Naphthalimide Fluorophores as a Two-Input Logic Gate and Its Antibacterial Evaluation

The synthesis, sensor activity, and logic behavior of a novel 4-iminoamido-1,8-naphthalimide bichromophoric system based on a "fluorophore-receptor" architecture with ICT chemosensing properties is reported. The synthesized compound showed good colorimetric and fluorescence signaling properties as a function of pH and proved itself as a promising probe for the rapid detection of pH in an aqueous solution and base vapors in a solid state. The novel dyad is able to work as a two-input logic gate with chemical inputs H⁺ (Input 1) and HO^- (Input 2) executing INHIBIT logic gate. The synthesized bichromophoric system and the corresponding intermediates demonstrated good antibacterial activity toward Gram (+) and Gram (-) bacteria when compared with the Gentamycin standard.

Fluorescent Probes as a Tool in Diagnostic and Drug Delivery Systems

Over the last few years, the development of fluorescent probes has received considerable attention. Fluorescence signaling allows noninvasive and harmless real-time imaging with great spectral resolution in living objects, which is extremely useful for modern biomedical applications. This review presents the basic photophysical principles and strategies for the rational design of fluorescent probes as visualization agents in medical diagnosis and drug delivery systems. Common photophysical phenomena, such as Intramolecular Charge Transfer (ICT), Twisted Intramolecular Charge Transfer (TICT), Photoinduced Electron Transfer (PET), Excited-State Intramolecular Proton Transfer (ESIPT), Fluorescent Resonance Energy Transfer (FRET), and Aggregation-Induced Emission (AIE), are described as platforms for fluorescence sensing and imaging in vivo and in vitro. The presented examples are focused on the visualization of pH, biologically important cations and anions, reactive oxygen species (ROS), viscosity, biomolecules, and enzymes that find application for diagnostic purposes. The general strategies regarding fluorescence probes as molecular logic devices and fluorescence–drug conjugates for theranostic and drug delivery systems are discussed. This work could be of help for researchers working in the field of fluorescence sensing compounds, molecular logic gates, and drug delivery.

Self-Associated 1,8-Naphthalimide as a Selective Fluorescent Chemosensor for Detection of High pH in Aqueous Solutions and Their Hg2+ Contamination

A novel diamino triazine based 1,8-naphthalimide (NI-DAT) has been designed and synthesized. Its photophysical properties have been investigated in different solvents and its sensory capability evaluated. The fluorescence emission of NI-DAT is significantly impacted by the solvent polarity due to its inherent intramolecular charge transfer character. Moreover, the fluorescence emission quenched at higher pH as a result of photo-induced electron transfer (PET) from triazine moiety to 1,8-naphthalimide after cleaving hydrogen bonds in the self-associated dimers. Furthermore, the new chemosensor exhibited a good selectivity and sensitivity towards Hg²⁺ among all the used various cations and anions in the aqueous solution of ethanol (5:1, v/v, pH = 7.2, Tampon buffer). NI-DAT emission at 540 nm was quenched remarkably only by Hg²⁺, even in the presence of other cations or anions as interfering analytes. Job's plot revealed a 2:1 stoichiometric ratio for NI-DAT/Hg²⁺ complex, respectively.

Low Molecular Weight Probe for Selective Sensing of PH and Cu2+ Working as Three INHIBIT Based Digital Comparator

A novel simple molecular chemosensor 2 was synthesized and examined for pH, cations and anions detection. At pH values higher than 10, probe 2 switches on a green emission where the excited state intramolecular proton transfer (ESIPT) is ceased. Also, the probe absorption spectrum shows a clear pH dependence, and the probe aqueous solution (ethanol/water = 1:2, borate buffer) responds selectively and sensitively through its fluorescence spectrum to the presence of Cu²⁺. Job's plot gave a 2:1 stoichiometry of Probe-2/Cu²⁺ complex, which responds to the presence of S^2- and H₂PO₄^- in aqueous solution (ethanol/water = 1:2, borate buffer) by its absorption and fluorescence spectra. In addition, probe 2 mimics a digital comparator based on three INHIBIT logic gates by different outputs using HO^- and H⁺ as inputs. Moreover, probe 2 also executes AND and NOT TRANSFER logic gates using Cu²⁺ and S^2- as inputs.

Cyrene™ as a Neoteric Bio-Based Solvent for Catalyst-Free Microwave-Assisted Construction of Diverse Bipyridine Analogues for Heavy-Metal Sensing

An environment-friendly synthetic protocol was developed to access polyfunctionalized bipyridines from readily available amines, chromone-3-carboxaldehydes, and pyridinylacetonitriles under catalyst- and additive-free conditions using the bio-renewable neoteric solvent dihydrolevoglucosenone (Cyrene™). In this strategy, amines served as both a mild-base promoter and a substrate. In addition, water was the only by-product of this reaction. This multi-component protocol provided highly diverse 2,3-, 3,3-, and 3,4-bipyridines in good-to-excellent yields. Operational simplicity, short reaction time, excellent atom economy, and easily obtainable substrates are among the features of this microwave-assisted synthesis. Additionally, the compounds synthesized via this method have demonstrated the ability to detect heavy metals, specifically mercury(II), copper(II), and iron (III) ions.

Recent Progress in Small-Molecule Fluorescent Probes for Detecting Mercury Ions

Mercury is a highly toxic and non-essential element that is found in every corner of the globe. The small amount of mercury produced by various pathways eventually enters freshwater and marine ecosystems, circulating through the food chain (especially fish) and causing various environmental problems in aspects including plants, animals, and human. There are several traditional quantitative methods developed for mercury ions (II) analysis in water samples. However, due to the complexity of the detection process, high cost and strong technical expertise, it is difficult to detect mercury ions in real-time. Therefore, in recent years, a large number of researchers have developed small-molecule fluorescent probes for Hg ions detection. Fluorimetry has the advantages of convenient detection, short response time, high sensitivity and good selectivity. This review summarized the small-molecule fluorescent probes for mercuric ion detection developed in recent years according to the chemical structural classification, compared their performances and elaborated the mechanism. We hope that the review will help the researches for the designs of metal ions fluorescent probes and their applications with certain reference value.

A smart chemosensor: Discriminative multidetection and various logic operations in aqueous solution at biological pH

A novel rhodamine-pyrazole based molecular probe was designed and easily synthesized. The probe could to detect several analytes in aqueous solution at biological pH (HEPES, pH = 7.2). Several heavy metal cations, including Cu²⁺, Fe³⁺, Al³⁺, Hg²⁺ and Ni²⁺ were detected discriminately by the probe. Also, the novel compound exhibited a good sensory selectivity towards S₂O₅^2- by both absorption and emission spectra. Moreover, probe/Cu²⁺ complex could to detect several anions, including F^-, CN^-, S^2-, CH₃COO^-, CO₃^2- and NO₂^-. Furthermore, the probe exhibited a high potential to work as a molecular system able to perform a number of logical operations such as AND, NAND, NOR and INHIBIT logic gates.

A chemosensoring molecular lab for various analytes and its ability to execute a molecular logical digital comparator

We reported here the unique ability of a Rhodamine 6G-based probe (3) to detect discriminately several targets, including H⁺, HO^-, Cu²⁺, Hg²⁺, Fe³⁺, Co²⁺, Cd²⁺, Zn²⁺, Sn²⁺, Ni²⁺, Al³⁺, Pb²⁺, Ce³⁺and Ag⁺, by unambiguously colorimetric and fluorimetric outcomes. In aqueous solutions, the presence of proton induced the ring-opening of rhodamine moiety but the presence of hydroxide induced the conversion of 2-hydroxyphenyl hydrazone moiety from the non-fluorescent benzenoid form into the fluorescent quinoid form. The probe could to distinguish between different cations in DMF and to work like an artificial tongue at molecular level. Several logic gates including OR, INHIBIT and TRANSFER, were performed by the probe. Moreover, the probe is able to execute three INHIBIT logic gates by two inputs, which was exploited to execute a digital molecular comparator.

Naphthalimide-based optical turn-on sensor for monosaccharide recognition using boronic acid receptor

A highly selective and sensitive fluorescent sensor for the determination of fructose is developed. The fluorescent sensor was prepared by incorporating a new naphthalimide dye with a planar structure as a selectophore and graphene oxide (GO) nanoplatelets as a quencher for rapid optical detection of fructose. The designed probe, made with the high fusion loop-containing dye, along with the GO nanoplatelets, detected fructose over the other monosaccharides very well. The proposed sensor displays a linear response range of 7 × 10-5 to 3 × 10-2 M with a low limit of detection of 23 × 10-6 M in solution at pH 7.4. This sensor shows a good selectivity towards fructose with respect to other saccharides. The proposed sensor was then applied to the determination of fructose in human plasma with satisfactory results.

A new fluorescent-colorimetric chemosensor based on a Schiff base for detecting Cr3+, Cu2+, Fe3+ and Al3+ ions

A new Schiff base derivative fluorescence-colorimetric chemosensor 2-hydroxy-5-[(2-hydroxy-1-naphthyl)methylideneamino]benzoic acid (H₃L), has been designed and synthesized. H₃L displayed high selectivity and sensitivity for detecting Cr³⁺, Cu²⁺, Fe³⁺ and Al³⁺ ions in DMF/H₂O (v/v = 1/1) solution. When Cr³⁺, Cu²⁺ or Fe³⁺ ions were added, the solution of H₃L in DMF/H₂O exhibited different color changes. While with the addition of Fe³⁺ or Al³⁺ ions, the solution of H₃L in DMF/H₂O displayed different fluorescence responses. The bonding modes and bonding ratios of H₃L and metal ions were explored by the Job's plot, ¹H NMR titration, and electrospray ionization mass spectrometry (ESI-MS). The detection limits of H₃L with Cr³⁺, Cu²⁺, Fe³⁺and Al³⁺ ions were 3.37 × 10^-7 M, 4.65 × 10^-7 M, 3.58 × 10^-7 M and 4.89 × 10^-7 M, respectively.

Chemosensing properties and logic gate behaviors of graphene quantum dot-appended terpyridine

Graphene quantum dot-covalently appended terpyridine, GQDs-tpy, was synthesized and characterized by X-ray photoelectron spectroscopy, FTIR spectroscopy and transmission electron microscopy. GQDs-tpy was found to act as multifunctional chemosensors: a highly selective colorimetric chemosensor for Fe²⁺ as evidenced by an obvious color change from colorless to pink, and a typical fluorescence enhanced probe for Zn²⁺ over 13 metal cations even in practical water samples. Moreover, two-input XOR, INHIBIT and IMPICATION logic gates as well as four-input OR and NOR logic gates were constructed according to the characteristic responses of GQDs-tpy to a sequence of cations.