Detection of malachite green in fish based on magnetic fluorescent probe of CdTe QDs/nano-Fe3O4@MIPs

Highly sensitive fluorescent probe and portable test strip based on polyacrylic acid functionalized quantum dots for rapid visual detection of malachite green

Malachite green (MG) has been banned in aquaculture by many countries due to its high carcinogenicity, high teratogenicity, and easy residue. However, it is cheap and efficient characteristics have made it difficult to eliminate in recent decades, so it is essential to develop a rapid and accurate detection method for MG. Here, a highly Sensitive fluorescent probe based on polyacrylic acid (PAA) functionalized CdSe/CdxZn1-xS quantum dots (QDs) was prepared for the determination of MG. QDs functionalized by PAA (QDs@PAA) were used as energy donors, and MG was used as energy acceptor to construct fluorescence resonance energy transfer (FRET) system. The fluorescence of QDs@PAA could be linearly quenched by MG in the range of 0.05 ⁓ 2 μM, and the detection limit was 0.011 μM. In addition, a small amount of QDs@PAA (30 μL) was printed on the solid substrate by inkjet printing technology to prepare fluorescent test strips. When the concentration of MG was 2 μM, the fluorescent test strips were quenched and the detection process could be completed within 10 s, demonstrating significant potential for rapid visual detection of MG.

A molecular imprinted fluorescence sensor based on carbon quantum dots for selective detection of 4-nitrophenol in aqueous environments

P-nitrophenol (4-NP) is the most persistent and highly toxic species among nitrophenol. In this work, a novel fluorescent probe for the detection of 4-NP in aqueous environment was constructed by combining the carbon dots (CQDs) with excellent optical properties and the molecularly imprinted polymer (MIP) with favorable selectivity. The CQDs were synthesized by hydrothermal method using citric acid hydrate as carbon source and o-phenylenediamine as surface modifier, then the molecularly imprinted polymers coating on the CQDs (MIP@CQDs) were obtained by sol-gel imprinting process. The fluorescence quenching of MIP@CQDs is the results of internal filtration effect and dynamic quenching when they encounter with 4-NP. The probe is suitable for the quantitative detection of trace 4-NP in actual aqueous samples, such as tap water, wastewater and seawater, with satisfying recoveries from 95.1 % to 107.8 %, wide detection linear ranges between 0 and 144 μmol/L, low detection limit of 0.41 μmol/L and high selectivity. The detection results are consistent with those of the HPLC method. This work provides a simple, rapid and effective fluorescent detection method for trace 4-NP in aqueous environment.

Magnetic Fluorescent Quantum Dots Nanocomposites in Food Contaminants Analysis: Current Challenges and Opportunities

The presence of food contaminants can cause foodborne illnesses, posing a severe threat to human health. Therefore, a rapid, sensitive, and convenient method for monitoring food contaminants is eagerly needed. The complex matrix interferences of food samples and poor performance of existing sensing probes bring significant challenges to improving detection performances. Nanocomposites with multifunctional features provide a solution to these problems. The combination of the superior characteristics of magnetic nanoparticles (MNPs) and quantum dots (QDs) to fabricate magnetic fluorescent quantum dots (MNPs@QDs) nanocomposites are regarded as an ideal multifunctional probe for food contaminants analysis. The high-efficiency pretreatment and rapid fluorescence detection are concurrently integrated into one sensing platform using MNPs@QDs nanocomposites. In this review, the contemporary synthetic strategies to fabricate MNPs@QDs, including hetero-crystalline growth, template embedding, layer-by-layer assembly, microemulsion technique, and one-pot method, are described in detail, and their advantages and limitations are discussed. The recent advances of MNPs@QDs nanocomposites in detecting metal ions, foodborne pathogens, toxins, pesticides, antibiotics, and illegal additives are comprehensively introduced from the perspectives of modes and detection performances. The review ends with current challenges and opportunities in practical applications and prospects in food contaminants analysis, aiming to promote the enthusiasm for multifunctional sensing platform research.

Synthesis and Application of Silica-Coated Quantum Dots in Biomedicine

Quantum dots (QDs) are semiconductor nanoparticles with outstanding optoelectronic properties. More specifically, QDs are highly bright and exhibit wide absorption spectra, narrow light bands, and excellent photovoltaic stability, which make them useful in bioscience and medicine, particularly for sensing, optical imaging, cell separation, and diagnosis. In general, QDs are stabilized using a hydrophobic ligand during synthesis, and thus their hydrophobic surfaces must undergo hydrophilic modification if the QDs are to be used in bioapplications. Silica-coating is one of the most effective methods for overcoming the disadvantages of QDs, owing to silica's physicochemical stability, nontoxicity, and excellent bioavailability. This review highlights recent progress in the design, preparation, and application of silica-coated QDs and presents an overview of the major challenges and prospects of their application.

A magnetic phosphorescence molecularly imprinted polymers probe based on manganese-doped ZnS quantum dots for rapid detection of trace norfloxacin residual in food

This paper reports the development of a novel probe based on magnetic room-temperature phosphorescence quantum dots with molecularly imprinted polymers (MQD-MIPs) for the rapid detection of trace norfloxacin (NFX) residual in complex food matrix. The highly selective probe was constructed by surface molecular imprinting technology using magnetic materials (Fe₃O₄ nanoparticles) as core, Mn-doped ZnS quantum dots (Mn-ZnS QDs) as phosphorescent materials, NFX as template, 3-aminopropyltriethoxysilane as functional monomer, and tetraethoxysilane as crosslinking agent. The as-obtained MQD-MIPs were characterized in detail by transmission electron microscopy, scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectrometry, and vibrating sample magnetometer. A magnetic strength of 37.64 emu g^-1 was recorded. Also, the probe displayed excellent room temperature phosphorescence properties with excitation/emission peaks at 300/590 nm. Under the optimized conditions, the detection time was less than 40 min, phosphorescence intensity varied linearly with concentration from 1 to 90 μg·L^-1, and detection limit reached as low as 0.80 μg·L^-1. Furthermore, the MQD-MIPs-based probe successfully detected norfloxacin residues in spiked fish and milk samples with recoveries of 90.92-111.53% and RSD <7%, outperforming the standard control method-HPLC-FLD (recoveries of 85.89-118.28%).

Applications of surface functionalized Fe3O4 NPs-based detection methods in food safety

Food safety has always been an issue of great concern to people. The development of rapid, sensitive and specific detection technology of food pollutants is one of the hot issues in food science field. The rapid development of functionalized Fe₃O₄ nanoparticles (NPs) provides unprecedented opportunities and technical support for the innovation of food safety detection. The surface functionalized Fe₃O₄ NPs, which combine superparamagnetic with nanoscale feature, have become an excellent tool for food quality and safety detection. This review highlights the mechanism, principles, and applications of surface functionalized Fe₃O₄ NPs-based detection technique in the agrifood industry. Then the relevant characteristics, functional roles and general mechanisms of nanomaterial-based detection of various endogenous components and exogenous pollutants in foods are discussed in detail. Ultimately, this review is expected to promote the optimization of functionalized Fe₃O₄ NPs and provide direction for the diversity of signal recognition and the sustainability of detection methods.

Recent Applications of Magnetic Nanoparticles in Food Analysis

Nanotechnology has become a topic of interest due to the outstanding advantages that the use of nanomaterials offers in many fields. Among them, magnetic nanoparticles (m-NPs) have been one of the most widely applied in recent years. In addition to the unique features of nanomaterials in general, which exclusively appear at nanoscale, these present magnetic or paramagnetic properties that result of great interest in many applications. In particular, in the area of food analysis, the use of these nanomaterials has undergone a considerable increase since they can be easily separated from the matrix in sorbent-based extractions, providing a considerable simplification of the procedures. This allows reducing cost and giving fast responses, which is essential in the food trade to guarantee consumer safety. These materials can also be easily tunable, providing higher selectivity. Moreover, their particular electrical, thermal and optical characteristics allow enhancing sensor signals, increasing the sensitivity of the approaches based on this type of device. The aim of this review article is to summarise the most remarkable applications of m-NPs in food analysis in the last five years (2016–2020) showing a general view of the use of such materials in the field.

The Recent Advances of Fluorescent Sensors Based on Molecularly Imprinted Fluorescent Nanoparticles for Pharmaceutical Analysis

Fluorescent nanoparticles have good chemical stability and photostability, controllable optical properties and larger stokes shift. In light of their designability and functionability, the fluorescent nanoparticles are widely used as the fluorescent probes for diverse applications. To enhance the sensitivity and selectivity, the combination of the fluorescent nanoparticles with the molecularly imprinted polymer, i.e. molecularly imprinted fluorescent nanoparticles (MIFN), was an effective way. The sensor based on MIFN (the MIFN sensor) could be more compatible with the complex sample matrix, which was especially widely adopted in medical and biological analysis. In this mini-review, the construction method, detective mechanism and types of MIFN sensors are elaborated. The current applications of MIFN sensors in pharmaceutical analysis, including pesticides/herbicide, veterinary drugs/drugs residues and human related proteins, are highlighted based on the literature in the recent three years. Finally, the research prospect and development trend of the MIFN sensor are forecasted.

Biomolecular detection, tracking, and manipulation using a magnetic nanoparticle-quantum dot platform

Fluorescent and magnetic materials play a significant role in biosensor technology, enabling sensitive quantification and separations with applications in diagnostics, purification, quality control, and therapeutics.

Fe3O4-based nanotheranostics for magnetic resonance imaging-synergized multifunctional cancer management

Iron oxide (Fe₃O₄)-based theranostic agents show great promise toward advancing personalized nanomedicine due to their extraordinary physicochemical and biological properties. This original review aims to highlight and summarize the most recent progress of Fe₃O₄, starting with the synthesis and surface modification of superparamagnetic iron oxide nanoparticles (NPs). Desirable features of Fe₃O₄ are the initial focus, followed by a review of their theranostic applications including sensitive MRI, multimodal imaging and MRI-guided cancer therapy. Finally, potential nanotoxicity, regulatory and clinical translation barriers are addressed to outline future perspectives on Fe₃O₄ NP-based multifunctional theranostic platforms. It is strongly believed that in the near future, Fe₃O₄ NPs will open new routes with regard to cancer management.

A nanocomposite fluorescent probe of polyaniline, graphene oxide and quantum dots incorporated into highly selective polymer for lomefloxacin detection

A nanocomposite fluorescent probe based on fluorescence quenching was fabricated and utilized for the detection of lomefloxacin. The fabricated probe integrated the high sensitivity of quantum dots, the excellent selectivity of molecularly imprinted polymer and the high adsorption affinity of graphene oxide and polyaniline. The probe exhibited good sensitivity, high specificity, and rapidity for lomefloxacin monitoring. Fluorescence emission was reduced linearly by lomefloxacin from 0.10 to 50.0 μg L^-1 and the probe exhibited a low limit of detection of 0.07 μg L^-1. The nanooptosensor successfully detected lomefloxacin in milk, chicken meat and egg samples. Recoveries were obtained in the range of 81.5-99.6% and the RSDs were below 7%. The results of this method agreed well with results of HPLC but provided higher sensitivity. This easily fabricated nanocomposite probe could be developed into a highly sensitive and selective optosensor to detect other organic compounds in various complex samples.

Sensitive, simple and rapid colorimetric detection of malachite green in water, salmon and canned tuna samples based on gold nanoparticles

BACKGROUND

Malachite green is used in aquaculture and fisheries as a fungicide and antiseptic and it is also used in industry as a dye. However, malachite green is carcinogenic and highly toxic for humans and animals. In this study, a spectrophotometric method was developed to detect malachite green. The method was based on the surface plasmon resonance property of gold nanoparticles and interaction between malachite green and gold nanoparticles.

RESULTS

Malachite green-gold nanoparticles were rapidly aggregated in the acidic medium; as a result, a color change from red to blue was observed, which was easily detectable by the naked eye. The absorption ratio (A623/A520) of the gold nanoparticles in an optimized system exhibited a linear correlation with malachite green concentration. The method detection limit and linear range were 3 and 50-350 ng mL^-1 , respectively. The method was applied successfully to detect malachite green in different samples.

CONCLUSION

The method was simple and rapid to detect malachite green. The most important advantages of the method are the possibility of malachite green determination with very good accuracy and sensitivity using a simple UV-visible spectrometer without any expensive or sophisticated instrumentation and also the versatility of real samples. © 2018 Society of Chemical Industry.

Ratiometric fluorescence probe of MIPs@CdTe QDs for trace malachite green detection in fish

A facile and practical ratiometric fluorescence probe based on two CdTe quantum dots (QDs) coated with molecularly imprinted polymers (MIPs) was prepared for the detection of trace malachite green (MG) in fish. Two CdTe QDs coated with MIPs were fabricated by a one-pot method using MG, (3-aminopropyl) triethoxysilane (APTES) and tetraethyl orthosilicate (TEOS) as template, functional monomer, and cross-linker, respectively. CdTe QDs with λ_em 530 nm (gQDs) and 630 nm (rQDs) were used as the referential fluorophore and target sensitive fluorophore, respectively. The fluorescence intensity of gQDs remained unchanged in the presence of MG, while the fluorescence of rQDs could be quantitatively quenched by MG based on the strategy of fluorescence resonance energy transfer. The ratiometric fluorescence probe (MIPs@gQDs&rQDs) was characterized by transmission electron microscopy and Fourier transform infrared spectroscopy. The linear range of MG detection was 0.1-32 μmol L^-1 with a detection limit of 8.8 μg kg^-1. The constructed probe has been successfully applied to the detection of MG in fish with the recoveries of 92.3-109.1%, which were validated by the method of HPLC. The result indicated that the probe possessed rapid response, wide linear range, high sensitivity, and relatively high selectivity, and was low-cost and easy in operation in the detection of MG in fish samples.