Fast synthesis of porous copper nanoclusters for fluorescence detection of iron ions in water samples

Construction of a fluorescence switch sensor of Mn doped AgInS2 quantum dots for the detection of Fe (III) and ascorbic acid

The convenience and high efficiency of recently developed I-III-VI group AgInS2 (AIS) fluorescence sensors have garnered considerable attention. In this study, glutathione (GSH) was employed as a stabilizer to synthesize Mn doped AgInS2 quantum dots (Mn-AIS QDs) via a one-step hydrothermal method at a lower temperature. The resultant samples displayed favorable photoluminescent characteristics and excellent water dispersibility. The photoluminescence of Mn-AIS QDs is quenched by Fe (III) via a photo-induced electron transfer mechanism (PET), and this quenching can be reversed by ascorbic acid (AA) as a result of the redox reaction between the Mn-AIS-Fe (III) complex and AA. Utilizing the on-off-on fluorescence principle, a fluorescence switch sensor based on Mn-AIS QDs was developed for the detection of Fe (III) and AA. The linear range for the detection of Fe (III) using the Mn-AIS QDs sensor was established to be 0.03-120 µM, with a detection limit (LOD) of 0.16 nM. For the detection of AA within the Mn-AIS-Fe (III) system, the linear range spanned from 0.05 to 180 µM, with a LOD of 0.031 µM. Both Mn-AIS and Mn-AIS-Fe (III) demonstrated robust anti-interference properties, facilitating the accurate detection of Fe (III) in tap water and AA in vitamin C tablets. This approach is notable for its simplicity, cost-effectiveness, and considerable potential for application in the creation of innovative biological and environmental sensors.

One-Pot facile synthesis of fluorescent copper nanoclusters for highly selective and sensitive detection of tetracycline

Due to the excellent characteristics, fluorescent copper nanoclusters (Cu NCs) have aroused great interest in recent years. Herein, the simple prepared, environmentally friendly fluorescent Cu NCs were synthesized by using trypsin as the stabilizer and applied for the determination of tetracycline. Uniformly dispersed Try-Cu NCs were obtained with average size of 3.5 ± 0.3 nm and some excellent merits of good water solubility, UV light stability and salt stability. Emission peaks around 460.0 nm were visibly quenched by tetracycline based on static quenching mechanism and inner filter effect (IFE). Two excellent linear relationships were observed between ln(F0/F) and tetracycline concentrations in the range of 1-100 μM and 100-300 μM with limit of detection (LOD) of 0.084 μM. Meanwhile, this nanoprobe exhibited an apparent selectivity for tetracycline detection. Moreover, Try-Cu NCs were successfully employed to determine tetracycline in serum and milk samples after facile pretreatment with satisfactory recovery rates and credible standard deviation. The results suggested that this as-prepared Try-Cu NCs had excellent application prospects in the future.

Eco-friendly Fluorescent Sensor for Sensitive and Selective Detection of Zn2+ and Fe3+ Ions: Applications in Human Hair Samples

A new eco-friendly sensor, 3-((6-((4-chlorobenzylidene)amino)pyridin-2-yl)imino)indolin-2-one (CBAPI) was synthesized and well characterized. The CBAPI sensor was employed for detecting Zn2+ and Fe3+ ions. It exhibited a low limit of detection at pH 6.0, with values of 2.90, for Zn2+ and 3.59 nmol L-1 for Fe3+ ions. The sensor demonstrated high selectivity over other interfering cations. Additionally, the high binding constants reflect the great affinity of sensor towards Zn2+ and Fe3+ ions. To further validate its quantification ability for Zn2+ ions, the synthesized CBAPI sensor was used to determine Zn levels in human hair samples, and the results were confirmed using atomic absorption spectroscopy (AAS). The AGREE metric tool was used to assess the method's environmental impact and practical applicability. These positive outcomes indicated that the new method for detecting Zn2+ and Fe3+ ions is environmentally friendly and safe for humans. The developed CBAPI sensor represents a potential development in metal ion detection, combining sensitivity, selectivity, and rapidity.

Histidine-capped copper nanoclusters for in situ amplified fluorescence monitoring of doxycycline through inner filter effect

There is a significant need to accurately measure doxycycline concentrations in view of the adverse effects of an overdose on human health. A fluorescence (FL) detection method was adopted and copper nanoclusters (CuNCs) were synthesized using chemical reduction technology. Based on FL quenching with doxycycline, the prepared CuNCs were used to explore a fluorescent nanoprobe for doxycycline detection. In an optimal sensing environment, this FL nanosensor was sensitive and selective in doxycycline sensing and displayed a linear relationship in the range 0.5-200 μM with a detection limit of 0.092 μΜ. A characterization test demonstrated that CuNCs offered active functional groups for identifying doxycycline using electrostatic interaction and hydrogen bonds. Static quenching and the inner filter effect (IFE) resulted in weakness in the FL of His@CuNCs with doxycycline with great efficiency. This suggested nanosensor was revealed to be a functional model for simple and rapid detection of doxycycline in real samples with very pleasing accuracy.

Fluorescent folic acid-capped copper nanoclusters for the determination of rifampicin based on inner filter effect

Development of excellent sensors to determine trace concentrations of rifampicin is of intense importance for medicine analysis and human health. Herein, a facile and green fluorescent probe was established for the determination of rifampicin by using folic acid protected copper nanoclusters (FA-Cu NCs). Many characterization methods were applied for the analysis of the as-prepared FA-Cu NCs including UV-visible absorption spectra, fluorescence spectra, Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), fluorescence lifetime and X-ray photoelectron spectroscopy (XPS). The TEM image suggested that the as-prepared FA-Cu NCs were highly dispersed. The as-synthesized FA-Cu NCs emerged blue fluorescence under UV light and demonstrated maximum emission wavelength at 446 nm under the maximum excitation wavelength of 358 nm. After the addition of rifampicin, the FL intensities of FA-Cu NCs were uncommonly quenched. The related experimental data intimated that the quenching mechanisms were assumed to the inner filter effect (IFE) and static quenching. The as-proposed probe platform displayed an obvious linear relationship with rifampicin concentrations varying from 0.5 to 100 µM, and the corresponding detection limit (LOD) was 0.073 µM (S/N = 3). Finally, the as-established detection platform was successfully employed to analyze trace concentrations of rifampicin in real samples.

Multi-dentate chelation induces fluorescence enhancement of pyrene moiety for highly selective detection of Fe(III)

Fluorescence enhancement has great advantages and various promising applications for a fluorescent molecular probe, which shows high sensitivity and high selectivity. In this report, a novel pyrene-based fluorescent probe with multidentate ligand (PPD) was synthesized for highly selective detection of Fe(III), which exhibited great fluorescence enhancement response upon the addition of Fe(III) in aqueous solution of pH 3.5 ~ 7.5, with a detection limit of 115 nM. The probe also has good water solubility and photostability. Further fluorescence titration confirmed 1:1 stoichiometric ratio for the probe PPD-Fe(III), which can be applied for quantification of Fe(III). The probe was validated for ferric detection in real water samples by spike and recovery test.

Novel luteolin sensor of tannic acid-stabilized copper nanoclusters with blue-emitting fluorescence

In this work, the fluorescent copper nanoclusters (Cu NCs) were firstly adopted to detect luteolin with excellent performance. The blue-emitting Cu NCs was successfully prepared through a facile one-pot approach by protection of tannic acid (TA) and chemical reduction of ascorbic acid (AA). The water-soluble nanoclusters possessed uniform size and displayed good stability. The TA-Cu NCs showed maximum luminescence at 434 nm when excited at 366 nm. Based on the static quenching and inner filter effect (IFE) mechanism, the TA-Cu NCs was efficiently and selectively quenched by luteolin. The detection limit was 0.12 μM and linear relationship existed in the range of 0.2-100 μM. Moreover, the TA-Cu NCs probe was successfully employed to detect luteolin in bovine serum samples with satisfactory recoveries. This novel platform was expected to expand the possible detection method based on fluorescence properties.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

Discriminating detection of dissolved ferrous and ferric ions using copper nanocluster-based fluorescent probe

Discrimination and detection of specific metal ions that belong to the same metallic element with different valence states in a complex matrix is challenging. In the present work, a fluorescence method using polyvinylpyrrolidone stabilized copper nanocluster (CuNCs@PVP) as a probe for discriminating detection of ferrous (Fe³⁺) and ferric (Fe²⁺) ions was developed. The CuNCs@PVP exhibited an excellent selective response to Fe³⁺ ions in contrast to Fe²⁺ ions and other metal ions when the pH value of solution was less than 4.0. Furthermore, the fluorescence of the CuNCs@PVP could be more sensitively quenched by Fe²⁺ ions by virtue of Fenton reaction. The different response of CuNCs@PVP towards Fe³⁺ and Fe²⁺ ions under different conditions offered the potential for the discriminating detection of Fe³⁺ and Fe²⁺ ions. Based on detailed optimization of detection conditions, an excellent linear relationship between the fluorescence quenching efficiency (F/F₀) of the CuNCs@PVP and the concentration of Fe³⁺ ions over the range of 0.4-20.0 μM and of Fe²⁺ ions in the range of 0.01-0.4 μM were obtained, respectively. The detection limits for the Fe³⁺ and Fe²⁺ ions were 0.14 μM and 0.008 μM, respectively. The developed probe showed good selectivity and presented an alternative strategy for discriminating detection of Fe³⁺ and Fe²⁺ ions in complex samples.

Blue-emitting glutathione-capped copper nanoclusters as fluorescent probes for the highly specific biosensing of furazolidone

Herein, a facile, straightforward and green method was developed to prepare copper nanoclusters by using glutathione (GSH) as the protecting agent and ascorbic acid as the reducing agent. The glutathione-templated copper nanoclusters (GSH-Cu NCs) were characterized through fluorescence spectroscopy, UV-vis absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and fluorescence lifetime analysis. The as-synthesized Cu NCs showed blue fluorescence with a peak centered at 426 nm. The Cu NCs had excellent water solubility, stability and dispersibility. Based on the inner filter effect and static quenching mechanism, Cu NCs were employed to detect furazolidone in bovine serum samples. Under optimal detection conditions, a good linear relationship was observed between F₀/F and the furazolidone concentration from 0.05 to 60 μM. The detection limit (LOD) was 0.012 μM. Furthermore, the fluorescence probe was successfully used in the quantification of furazolidone in bovine serum samples. In addition, this analytical method provides a rapid, easy and ultrasensitive fluorescence platform for the detection of furazolidone.

In vitro cytotoxicity studies of smart pH-sensitive lamivudine-loaded CaAl-LDH magnetic nanoparticles against Mel-Rm and A-549 cancer cells

In this study, an effective nano-drug delivery system was prepared by the co-precipitation method via two steps; the preparation of Fe₃O₄ magnetic nanoparticles and its surface modification with layered double hydroxide (LDH) and loading lamivudine on this nanocarrier (Fe₃O₄@CaAl-LDH@Lamivudine). The developed nanoparticles (NPs) were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray analysis, Fourier-transformed infrared spectroscopy, vibrating-sample magnetometry, thermogravimetric analysis, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller. The prepared system demonstrated an average size of 130 nm. Also, the drug entrapment efficiency was estimated at ∼70%. In vitro, drug release investigations showed a controlled and pH-dependent lamivudine release over 300 min. The in vitro cytotoxic activity of Fe₃O₄@CaAl-LDH@Lamivudine NPs was explored against Mel-Rm and A-549 cancer cell lines in comparison with lamivudine and nanocarrier using lactate dehydrogenase colorimetric and MTT assay. The results of the MTT assay revealed that the Fe₃O₄@CaAl-LDH@Lamivudine NPs significantly inhibited the proliferation of Mel-Rm and A-549 cells in a dose-dependent manner. The influences of Fe₃O₄@CaAl-LDH@Lamivudine on the cancer cell lines by different therapeutic investigation illustrated the remarkable effect in comparison with free drug. Finally, the achieved consequences confirm the anticancer properties of Fe₃O₄@CaAl-LDH@Lamivudine and indicate that they may be a cost-effective substitute in the treatment of lung and skin cancer.Communicated by Ramaswamy H. Sarma.

Computational design and clinical demonstration of a copper nanocluster based universal immunosensor for sensitive diagnostics

Nanoparticle based sensors are good alternatives for non-enzymatic sensing applications due to their high stability, superior photoluminescence, biocompatibility and ease of fabrication, with the only disadvantage being the cost of the synthesis process (owing to the expensive precursors and infrastructure). For the first time, we report the design of an immunosensor employing streptavidin conjugated copper nanocluster, developed at a much lower cost compared to other nanomaterials like noble metal nanoparticles and quantum dots. Using in silico tools, we have tried to establish the dynamics of conjugation of nanocluster to the streptavidin protein, based on EDC-NHS coupling. The computational simulations have successfully explained the crucial role played by the components of the immunosensor leading to an efficient design capable of high sensitivity. In order to demonstrate the functioning of the Copper Nanocluster ImmunoSensor (CuNIS), HIV-1 p24 biomarker test was chosen as the model assay. The immunosensor was able to achieve an analytical limit of detection of 23.8 pg mL-1 for HIV-1 p24 with a linear dynamic range of 27-1000 pg mL-1. When tested with clinical plasma samples, CuNIS based p24 assay showed 100% specificity towards HIV-1 p24. With the capability of multiplexed detection and a cost of fabrication 100 times lower than that of the conventional metal nanoclusters, CuNIS has the potential to be an essential low-cost diagnostic tool in resource-limited settings.

Fluorometric assay of iron(II) lactate hydrate and ammonium ferric citrate in food and medicine based on poly(sodium-p-styrenesulfonate)-enhanced Ag nanoclusters

Poly(sodium-p-styrenesulfonate)-enhanced and D-penicillamine stabilized Ag nanoclusters (PSS-DPA-AgNCs) were prepared using one-step ultraviolet irradiation combined with microwave heating method, and the effects of the AgNCs photo-luminescence performance based on different types of polyelectrolytes and energy suppliers were studied detailedly. The as-prepared AgNCs can be used as a viable fluorescent probe for monitoring indirectly iron(II) lactate hydrate (ILH) and ammonium ferric citrate (AFC), respectively. The fluorescence (FL) quenching of PSS-DPA-AgNCs by Fe³⁺ (it is obtained from oxidized ILH/ionized AFC) mainly derives from a dynamic quenching process. Excellent linear relationships exist between the FL quenching degree of the AgNCs and the concentrations of ILH/AFC in the range of 0.17-6.00/0.067-3.33 μmol·L^-1, and corresponding limit of detection (at 3σ/slope) is 12.4/6.04 nmol·L^-1. Moreover, the AgNCs probe was extended to the assays of ILH in tablets, solid beverage or ILH additive and AFC in two kinds of edible salts or syrup with satisfactory results compared with the standard 1, 10-phenanthroline method. In addition, the AgNCs probe reveals a good temperature sensing capability.

Ascorbic acid stabilised copper nanoclusters as fluorescent sensors for detection of quercetin

In this report, green-emitting fluorescence copper nanoclusters (Cu NCs) were synthesized using ascorbic acid as reducing agent and protecting agent. The ascorbic acid capped Cu NCs (AA-Cu NCs) were characterized using fluorescence spectroscopy, UV-vis absorption spectroscopy, Fourier Transform Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The analysis data demonstrated that the AA-Cu NCs were highly dispersed with an average diameter of 2 nm. The as-prepared Cu NCs possessed good water solubility, excellent photostability and displayed excitation-dependent fluorescence characteristics. More importantly, the fluorescence intensity of AA-Cu NCs was linearly quenched in the presence of quercetin from 0.7 to 50 μM and the detection limit (LOD) was 0.19 μM. Finally, the fluorescence sensor was successfully employed to detect quercetin in bovine serum samples.

A fluorescent sensor based on ascorbic acid-functionalized copper nanoclusters (AA-Cu NCs) were prepared for the sensitive detection of quercetin.