Hyperspectral inversion of heavy metal content in reclaimed soil from a mining wasteland based on different spectral transformation and modeling methods

Estimating the Heavy Metal Contents in Entisols from a Mining Area Based on Improved Spectral Indices and Catboost

In the study of the inversion of soil multi-species heavy metal element concentrations using hyperspectral techniques, the selection of feature bands is very important. However, interactions among soil elements can lead to redundancy and instability of spectral features. In this study, heavy metal elements (Pb, Zn, Mn, and As) in entisols around a mining area in Harbin, Heilongjiang Province, China, were studied. To optimise the combination of spectral indices and their weights, radar plots of characteristic-band Pearson coefficients (RCBP) were used to screen three-band spectral index combinations of Pb, Zn, Mn, and As elements, while the Catboost algorithm was used to invert the concentrations of each element. The correlations of Fe with the four heavy metals were analysed from both concentration and characteristic band perspectives, while the effect of spectral inversion was further evaluated via spatial analysis. It was found that the regression model for the inversion of the Zn elemental concentration based on the optimised spectral index combinations had the best fit, with R2 = 0.8786 for the test set, followed by Mn (R2 = 0.8576), As (R2 = 0.7916), and Pb (R2 = 0.6022). As far as the characteristic bands are concerned, the best correlations of Fe with the Pb, Zn, Mn and As elements were 0.837, 0.711, 0.542 and 0.303, respectively. The spatial distribution and correlation of the spectral inversion concentrations of the As and Mn elements with the measured concentrations were consistent, and there were some differences in the results for Zn and Pb. Therefore, hyperspectral techniques and analysis of Fe elements have potential applications in the inversion of entisols heavy metal concentrations and can improve the quality monitoring efficiency of these soils.

Regional Inversion of Soil Heavy Metal Cr Content in Agricultural Land Using Zhuhai-1 Hyperspectral Images

With the development of hyperspectral imaging technology, the potential for utilizing hyperspectral images to accurately estimate heavy metal concentrations in regional soil has emerged. Currently, soil heavy metal inversion based on laboratory hyperspectral data has demonstrated a commendable level of accuracy. However, satellite images are susceptible to environmental factors such as atmospheric and soil background, presenting a significant challenge in the accurate estimation of soil heavy metal concentrations. In this study, typical chromium (Cr)-contaminated agricultural land in Shaoguan City, Guangdong Province, China, was taken as the study area. Soil sample collection, Cr content determination, laboratory spectral measurements, and hyperspectral satellite image collection were carried out simultaneously. The Zhuhai-1 hyperspectral satellite image spectra were corrected to match laboratory spectra using the direct standardization (DS) algorithm. Then, the corrected spectra were integrated into an optimal model based on laboratory spectral data and sample Cr content data for regional inversion of soil heavy metal Cr content in agricultural land. The results indicated that the combination of standard normal variate (SNV)+ uninformative variable elimination (UVE)+ support vector regression (SVR) model performed best with laboratory spectral data, achieving a high accuracy with an R2 of 0.97, RMSE of 5.87, MAE of 4.72, and RPD of 4.04. The DS algorithm effectively transformed satellite hyperspectral image data into spectra resembling laboratory measurements, mitigating the impact of environmental factors. Therefore, it can be applied for regional inversion of soil heavy metal content. Overall, the study area exhibited a low-risk level of Cr content in the soil, with the majority of Cr content values falling within the range of 36.21-76.23 mg/kg. Higher concentrations were primarily observed in the southeastern part of the study area. This study can provide useful exploration for the promotion and application of Zhuhai-1 image data in the regional inversion of soil heavy metals.

Inversion of soil heavy metals in metal tailings area based on different spectral transformation and modeling methods

The exploitation of mineral resources has seriously polluted the environment around mines, notably in terms of heavy metal contamination of tailings pond soil. Hyperspectral remote sensing, as opposed to conventional on-site sampling and laboratory analysis, offers a potent tool for effective monitoring the content of soil heavy metals. Therefore, we investigated the inversion models of heavy metal content in metal tailings area based on measured hyperspectral and multispectral data. Hyperspectral and its transformation, as well as the simulated Landsat8-OLI multispectral were used for model inversion respectively. Stepwise Multiple Linear Regression (SMLR), Partial Least Squares Regression (PLSR) and Back Propagation Neuron Network (BPNN) were established to study the spectral inversion of eight heavy metals (Cu, Cd, Cr, Ni, Pb, Zn, As, and Hg). The direct inversion models were established on the basis of correlation analysis and the adjust coefficient of determination (Adjust_R2) and Root Mean Square Error (RMSE) were used for model evaluation. Then the best combination of spectral transformation and inversion model were explored. The model inversion results suggested that: (1) Hyperspectral transformation can generally improve the model accuracy, especially the second derivative spectral, based on which the training Adjust_R2 of Hg SMLR and PLSR models are as high as 0.795 and 0.802. (2) The BP neural network inversion based on the denoised hyperspectrum demonstrate that both the training and testing Adjust_R2 of Cd, Ni and Hg models are all greater than 0.5, indicating good applicability in practical extrapolation. (3) Both the training and testing Adjust_R2 of Cu and Hg PLSR models based on simulated R_Landsat8-OLI multispectral are greater than 0.5, and Hg has lower RMSE and lager Adjust_R2 with training and testing Adjust_R2 values of 0.833 and 0.553 respectively. (4) Multispectral remote sensing detection and mapping of Hg contamination were realized by the optimal simulation model of Hg. Hence, it is feasible to simulate the multispectral with hyperspectral data for investigating heavy metal contamination.

Study on Hyperspectral Monitoring Model of Total Flavonoids and Total Phenols in Tartary Buckwheat Grains

Tartary buckwheat is a common functional food. Its grains are rich in flavonoids and phenols. The rapid measurement of flavonoids and phenols in buckwheat grains is of great significance in promoting the development of the buckwheat industry. This study, based on multiple scattering correction (MSC), standardized normal variate (SNV), reciprocal logarithm (Lg), first-order derivative (FD), second-order derivative (SD), and fractional-order derivative (FOD) preprocessing spectra, constructed hyperspectral monitoring models of total flavonoids content and total phenols content in tartary buckwheat grains. The results showed that SNV, Lg, FD, SD, and FOD preprocessing had different effects on the original spectral reflectance and that FOD can also reflect the change process from the original spectrum to the integer-order derivative spectrum. Compared with the original spectrum, MSC, SNV, Lg, FD, and SD transformation spectra can improve the correlation between spectral data and total flavonoids and total phenols in varying degrees, while the correlation between FOD spectra of different orders and total flavonoids and total phenols in grains was different. The monitoring models of total flavonoids and total phenols in grains based on MSC, SNV, Lg, FD, and SD transformation spectra achieved the best accuracy under SD and FD transformation, respectively. Therefore, this study further constructed monitoring models of total flavonoids and total phenols content in grains based on the FOD spectrum and achieved the best accuracy under 1.6 and 0.6 order derivative preprocessing, respectively. The R²_c, RMSE_c, R²_v, RMSE_v, and RPD were 0.8731, 0.1332, 0.8384, 0.1448, and 2.4475 for the total flavonoids model, and 0.8296, 0.2025, 0.6535, 0.1740, and 1.6713 for the total phenols model. The model can realize the rapid measurement of total flavonoids content and total phenols content in tartary buckwheat grains, respectively.

Pollution level mapping of heavy metal in soil for ground-airborne hyperspectral data with support vector machine and deep neural network: A case study of Southwestern Xiong'an, China

Heavy metal in soil is a significant issue with the urban development in China, and traditional ground spectra are difficult to satisfy the demands for heavy metal monitoring and assessment in large-scale areas. In the paper, ground-airborne hyperspectral data is utilized to analyze the pollution level of heavy metal, 423 soil samples and corresponding ground spectra are collected synchronously with airborne hyperspectral image acquisition in Southwestern Xiong'an, China. Among them, support vector machine (SVM) is utilized to predict the concentration of independent samples, deep neural network (DNN) is aimed to estimate the spatial distribution of concentration with airborne image scenes. Finally, the pollution level is generated by the Softmax function, and it is defined by the risk control standard of heavy metals. The ground spectra and airborne image are closely integrated by the proposed method, the pollution situation is directly evaluated by ground-airborne hyperspectral data and indirectly evaluated by the concentration of local space, and the mapping results are believed to provide constructive advices about environmental protection.

Estimation of multi-media metal(loid)s around abandoned mineral processing plants using hyperspectral technology and extreme learning machine

Hyperspectral techniques are promising alternatives to traditional methods of investigating potentially toxic metal(loid) contamination. In this study, hyperspectral technology combined with partial least squares regression (PLSR) and extreme learning machine (ELM) established estimation models to predict the contents of copper (Cu), zinc (Zn), arsenic (As), cadmium (Cd), lead (Pb) and tin (Sn) in multi-media environments (mine tailings, soils and sediments) surrounding abandoned mineral processing plants in a typical tin-polymetallic mineral agglomeration in Guangxi Autonomous Region. Four spectral preprocessing methods, Savitzky-Golay (SG) smoothing, continuum removal (CR), first derivative (FD) and continuous wavelet transform (CWT), were used to eliminate noise and highlight spectral features. The optimum combinations of spectral preprocessing and machine learning algorithms were explored, then the estimation models with best accuracy were obtained. CWT and CR were excellent spectral pretreatments for the hyperspectral data regardless of the applied algorithms. The coefficients of determination (R2) of estimation models for the best accuracy of various metals (loid) are as follows: Cu (CWT-ELM:0.85), Zn (CR-PLSR:0.93), As (CWT-ELM: 0.86), Cd (CR-PLSR: 0.89), Pb (CWT-PLSR: 0.75) and Sn (CR-ELM: 0.81). In contrast, ELM models had higher accuracy with R2 > 0.80 (except Cd and Pb). In conclusion, ELM-based spectral estimation models are able to predict metal (loid) concentrations with high accuracy and efficiency, providing a potential new combinatorial approach for estimating toxic metal contamination in multi-media environments.

Inversion study of cadmium content in soil based on reflection spectroscopy and MSC-ELM model

Heavy metal pollution in saline-alkali land has a significant impact on the ecological environment and human health. Rapid and accurate inversion of cadmium (Cd) element content in the saline-alkali land is important for environmental protection, saline-alkali soil improvement and conversion of saline-alkali land to cultivated land. Using traditional chemical detection methods to detect the content of heavy metal elements requires a long testing time and has the drawback of high prices. In this paper, we select the saline-alkali land of Zhenlai County as the study area and combine visible-NIR spectroscopy with machine learning models to invert the Cd content in the saline-alkali land. We preprocess the original reflection spectra using fractional order derivatives (FOD), then construct six three-band spectral indices (TBIs) and obtain the corresponding optimal band combination parameters by the optimal band combination (OBC) algorithm. To address the shortcomings of two-hidden-layer extreme learning machine (TELM), this paper introduces new weight parameters among the nodes of the first hidden layer, further extends it to multiple layers on this basis, and proposes the MSC-ELM model. The improved model is compared with several models, such as random forest (RF), partial least squares (PLS) and extreme learning machine (ELM). And the model performance is analyzed and compared by introducing several performance indicators, such as root mean square error (RMSE) and the ratio of the performance to interquartile (RPIQ). The experimental results show that the FOD transformation can eliminate the baseline drift and reduce the spectral noise. The constructed TBIs can effectively enhance the correlation with Cd content relative to the original single band, reduce redundant information and enhance the spectral features. The MSC-ELM model achieves better performance metrics compared to the other models and obtains the optimal prediction performance. This study provides an accurate and rapid method for the detection of Cd content in saline soil, which is important for the improvement and ecological recovery of saline soil.

The New Hyperspectral Analysis Method for Distinguishing the Types of Heavy Metal Copper and Lead Pollution Elements

In recent years, the problem of heavy metal pollution in agriculture caused by industrial development has been particularly prominent, directly affecting food and ecological environmental safety. Hyperspectral remote sensing technology has the advantages of high spectral resolution and nondestructive monitoring. The physiological and biochemical parameters of crops undergo similar changes under different heavy metal stresses. Therefore, it is a great challenge to explore the use of hyperspectral technology to distinguish the types of the heavy metal copper (Cu) and lead (Pb) elements. This is also a hot topic in the current research. In this study, several models are proposed to distinguish copper and lead elements by combining multivariate empirical mode decomposition (MEMD) transformation and machine learning. First, MEMD is introduced to decompose the original spectrum, which effectively removes the noise and highlights and magnifies the weak information of the spectrum. The successive projections algorithm (SPA), competitive adaptive reweighted sampling (CARS), and iteratively retaining informative variables (IRIV) were used to screen the characteristic bands and were combined with extreme learning machine (ELM), support vector machine (SVM), and general regression neural network (GRNN) algorithms to build models to distinguish the types of Cu and Pb elements. The quality of the model was evaluated using accuracy (A), precision (P), recall (R), and F-score. The results showed that the MEMD-SPA-SVM, MEMD-CARS-SVM, MEMD-SPA-ELM, MEMD-CARS-ELM, and MEMD-IRIV-ELM models intuitively and effectively distinguished the types of Cu and Pb elements. Their accuracy and F-scores were all greater than 0.8. To verify the superiority of these models, the same model was constructed based on first derivative (FD) and second derivative (SD) transformations, and the obtained classification and recognition accuracy (A) and F-score were both lower than 0.8, which further confirmed the superiority of the model established after MEMD transformation. The model proposed in this study has great potential for applying hyperspectral technology to distinguish the types of elements contaminated by Cu and Pb in crops.

Retrieving soil heavy metals concentrations based on GaoFen-5 hyperspectral satellite image at an opencast coal mine, Inner Mongolia, China

Soil heavy metals pollution has been becoming one of the severely environmental issues globally. Previous studies reported laboratory-measured spectra could be used to infer soil heavy metals concentrations to some extent. However, using field-obtained spectra to estimate soil heavy metals concentrations is still a great challenge due to the low precision and weak efficiency at large scales. The present study collected 110 topsoil samples from an Opencast Coal Mine of Ordos, Inner Mongolia, China. Then, the spectra and soil heavy metals concentrations of samples were measured under laboratory conditions. The direct standardization (DS) algorithm was introduced to calibrate the Gaofen-5 (GF-5) hyperspectral image based on the measured spectra of samples. The spectral reflectance of the GF-5 hyperspectral image was reconstructed using continuous wavelet transform (CWT) at different scales. The characteristic bands of GF-5 for estimating heavy metals concentrations were selected by the Boruta algorithm. Finally, the random forest (RF), the extreme learning machine (ELM), the support vector machine (SVM), and the back-propagation neural network (BPNN) algorithms were used to predict the heavy metals concentrations. Some findings were achieved. First, CWT can effectively eliminate the noise of satellite hyperspectral data. The characteristic bands of Zn (480-677, 827-1029, 1241-1334, 1435-1797, and 1949-2500 nm), Ni (514-630, 835-985, 1258-1325, 1460-1578, and 1949-2319 nm), and Cu (822-831; 1029-1300, 1486-1595, and 1730-2294 nm) can be effectively retrieved via the Boruta algorithm. Second, the estimation accuracy was significantly improved by using the DS algorithm. For zinc (Zn), nickel (Ni), and copper (Cu), the determination coefficients of the validation dataset (R_v²) were 0.77 (RF), 0.62 (RF), and 0.56 (ELM), respectively. Third, the distribution trends of heavy metals were almost consistent with the results of actual ground measurements. This paper revealed that the GF-5 can be one of the reliable satellite hyperspectral imagery for mapping soil heavy metals.

Identification of Soil Arsenic Contamination in Rice Paddy Field Based on Hyperspectral Reflectance Approach

Toxic heavy metals in soil negatively impact soil’s physical, biological, and chemical characteristics, and also human wellbeing. The traditional approach of chemical analysis procedures for assessing soil toxicant element concentration is time-consuming and expensive. Due to accessibility, reliability, and rapidity at a high temporal and spatial resolution, hyperspectral remote sensing within the Vis-NIR region is an indispensable and widely used approach in today’s world for monitoring broad regions and controlling soil arsenic (As) pollution in agricultural land. This study investigates the effectiveness of hyperspectral reflectance approaches in different regions for assessing soil As pollutants, as well as a basic review of space-borne earth observation hyperspectral sensors. Multivariate and various regression models were developed to avoid collinearity and improve prediction capabilities using spectral bands with the perfect correlation coefficients to access the soil As contamination in previous studies. This review highlights some of the most significant factors to consider when developing a remote sensing approach for soil As contamination in the future, as well as the potential limits of employing spectroscopy data.

Utilization of Pollution Indices, Hyperspectral Reflectance Indices, and Data-Driven Multivariate Modelling to Assess the Bottom Sediment Quality of Lake Qaroun, Egypt

Assessing the environmental hazard of potentially toxic elements in bottom sediments has always been based entirely on ground samples and laboratory tests. This approach is remarkably accurate, but it is slow, expensive, damaging, and spatially constrained, making it unsuitable for monitoring these parameters effectively. The main goal of the present study was to assess the quality of sediment samples collected from Lake Qaroun by using different groups of spectral reflectance indices (SRIs), integrating data-driven (Artificial Neural Networks; ANN) and multivariate analysis such as multiple linear regression (MLR) and partial least square regression (PLSR). Jetty cruises were carried out to collect sediment samples at 22 distinct sites over the entire Lake Qaroun, and subsequently 21 metals were analysed. Potential ecological risk index (RI), organic matter (OM), and pollution load index (PLI) of lake’s bottom sediments were subjected to evaluation. The results demonstrated that PLI showed that roughly 59% of lake sediments are polluted (PLI > 1), especially samples of eastern and southern sides of the lake’s central section, while 41% were unpolluted (PLI < 1), which composed samples of the western and western northern regions. The RI’s findings were that all the examined sediments pose a very high ecological risk (RI > 600). It is obvious that the three band spectral indices are more efficient in quantifying different investigated parameters. The results showed the efficiency of the three tested models to predict OM, PLI, and RI, revealing that the ANN is the best model to predict these parameters. For instance, the determination coefficient values of the ANN model of calibration datasets for predicting OM, PLI, and RI were 0.999, 0.999, and 0.999, while they were 0.960, 0.897, and 0.853, respectively, for the validation dataset. The validation dataset of the PLSR produced R2 values higher than with MLR for predicting PLI and RI. Finally, the study’s main conclusion is that combining ANN, PLSR, and MLR with proximal remote sensing could be a very effective tool for the detection of OM and pollution indices. Based on our findings, we suggest the created models are easy tools for forecasting these measured parameters.

Diagnosis of cadmium contamination in urban and suburban soils using visible-to-near-infrared spectroscopy

Previous studies have mostly focused on using visible-to-near-infrared spectral technique to quantitatively estimate soil cadmium (Cd) content, whereas little attention has been paid to identifying soil Cd contamination from a perspective of spectral classification. Here, we developed a framework to compare the potential of two spectral transformations (i.e., raw reflectance and continuum removal [CR]), three optimization strategies (i.e., full-spectrum, Boruta feature selection, and synthetic minority over-sampling technique [SMOTE]), and three classification algorithms (i.e., partial least squares discriminant analysis, random forest [RF], and support vector machine) for diagnosing soil Cd contamination. A total of 536 soil samples were collected from urban and suburban areas located in Wuhan City, China. Specifically, Boruta and SMOTE strategies were aimed at selecting the most informative predictors and obtaining balanced training datasets, respectively. Results indicated that soils contaminated by Cd induced decrease in spectral reflectance magnitude. Classification models developed after Boruta and SMOTE strategies out-performed to those from full-spectrum. A diagnose model combining CR preprocessing, SMOTE strategy, and RF algorithm achieved the highest validation accuracy for soil Cd (Kappa = 0.74). This study provides a theoretical reference for rapid identification of and monitoring of soil Cd contamination in urban and suburban areas.

Detecting Arsenic Contamination Using Satellite Imagery and Machine Learning

Arsenic, a potent carcinogen and neurotoxin, affects over 200 million people globally. Current detection methods are laborious, expensive, and unscalable, being difficult to implement in developing regions and during crises such as COVID-19. This study attempts to determine if a relationship exists between soil’s hyperspectral data and arsenic concentration using NASA’s Hyperion satellite. It is the first arsenic study to use satellite-based hyperspectral data and apply a classification approach. Four regression machine learning models are tested to determine this correlation in soil with bare land cover. Raw data are converted to reflectance, problematic atmospheric influences are removed, characteristic wavelengths are selected, and four noise reduction algorithms are tested. The combination of data augmentation, Genetic Algorithm, Second Derivative Transformation, and Random Forest regression (R2=0.840 and normalized root mean squared error (re-scaled to [0,1]) = 0.122) shows strong correlation, performing better than past models despite using noisier satellite data (versus lab-processed samples). Three binary classification machine learning models are then applied to identify high-risk shrub-covered regions in ten U.S. states, achieving strong accuracy (=0.693) and F1-score (=0.728). Overall, these results suggest that such a methodology is practical and can provide a sustainable alternative to arsenic contamination detection.

Estimation of Heavy Metals in Tailings and Soils Using Hyperspectral Technology: A Case Study in a Tin-Polymetallic Mining Area

Rapid assessment of heavy metal (HM) pollution in mining areas is urgently required for further remediation. Here, hyperspectral technology was used to predict HM contents of multi-media environments (tailings, surrounding soils and agricultural soils) in a mining area. The correlation between hyperspectral data and HMs was explored, then the prediction models were established by partial least squares regression (PLSR) and back propagation neural networks (BPNN). The determination coefficients (R²), root mean squared error and ratios of performance to interquartile range (RPIQ) were used to evaluate the performance of the models. Results show that: (1) both PLSR and BPNN had good prediction ability, and (2) BPNN had better generalization ability (Cu (R² = 0.89, RPIQ = 3.05), Sn (R² = 0.86, RPIQ = 4.91), Zn (R² = 0.74, RPIQ = 1.44) and Pb (R² = 0.70, RPIQ = 2.10)). In summary, this study indicates that hyperspectral technology has potential application in HM estimation and soil pollution investigation in polymetallic mining areas.

Hyperspectral Prediction of Soil Total Salt Content by Different Disturbance Degree under a Fractional-Order Differential Model with Differing Spectral Transformations

Soil salinization is an ecological challenge across the world. Particularly in arid and semi-arid regions where evaporation is rapid and rainfall is scarce, both primary soil salinization and secondary salinization due to human activity pose serious concerns. Soil is subject to various human disturbances in Xinjiang in this area. Samples with a depth of 0–10 cm from 90 soils were taken from three areas: a slightly disturbed area (Area A), a moderately disturbed area (Area B), and a severely disturbed area (Area C). In this study, we first calculated the hyperspectral reflectance of five spectra (R, R, 1/R, lgR, 1/lgR, or original, root mean square, reciprocal, logarithm, and reciprocal logarithm, respectively) using different fractional-order differential (FOD) models, then extracted the bands that passed the 0.01 significance level between spectra and total salt content, and finally proposed a partial least squares regression (PLSR) model based on the FOD of the significance level band (SLB). This proposed model (FOD-SLB-PLSR) is compared with the other three PLSR models to predict with precision the total salt content. The other three models are All-PLSR, FOD-All-PLSR, and IOD-SLB-PLSR, which respectively represent PLSR models based on all bands, all fractional-order differential bands, and significance level bands of the integral differential. The simulations show that: (1) The optimal model for predicting total salt content in Area A was the FOD-SLB-PLSR based on a 1.6 order 1/lgR, which provided good predictability of total salt content with a RPD (ratio of the performance to deviation) between 1.8 and 2.0. The optimal model for predicting total salt content in Area B was a FOD-SLB-PLSR based on a 1.7 order 1/R, which showed good predictability for total salt content with RPDs between 2.0 and 2.5. The optimal model for predicting total salt content in Area C was a FOD-SLB-PLSR based on a 1.8 order lgR, which also showed good predictability for total salt content with RPDs between 2.0 and 2.5. (2) Soils subject to various disturbance levels had optimal FOD-SLB-PLSR models located in the higher fractional order between 1.6 and 1.8. This indicates that higher-order FODs have a stronger ability to extract feature data from complex information. (3) The optimal FOD-SLB-PLSR model for each area was superior to the corresponding All-PSLR, FOD-All-PLSR, and IOD-SLB-PLSR models in predicting total salt content. The RPD value for the optimal FOD-SLB-PLSR model in each area compared to the best integral differential model showed an improvement of 9%, 45%, and 22% for Areas A, B, and C, respectively. It further showed that the fractional-order differential model provides superior prediction over the integral differential. (4) The RPD values that provided an optimal FOD-SLB-PLSR model for each area were: Area A (1.9061) < Area B (2.0761) < Area C (2.2892). This indicates that the prediction effect of data processed by fractional-order differential increases with human disturbance increases and results in a higher-precision model.

Retrieving zinc concentrations in topsoil with reflectance spectroscopy at Opencast Coal Mine sites

Heavy metals contaminations in mining areas aroused wide concerns globally. Efficient evaluation of its pollution status is a basis for further soil reclamation. Visible and near-infrared reflectance (Vis-NIR) spectroscopy has been diffusely used for retrieving heavy metals concentrations. However, the reliability and feasibility of calibrated models were still doubtful. The present study estimated zinc (Zn) concentrations via the random forest (RF) and partial least squares regression (PLSR) using ground in-situ Zn concentrations as well as soil spectral reflectance at an Opencast Coal Mine of Ordos, China in February 2020. The coefficient of determination (R2), root mean square error (RMSE), mean absolute error (MAE), and the ratio of performance to deviation (RPD) were selected to assess the robustness of the methods in estimating Zn contents. Moreover, the characteristic bands were chosen by Pearson correlation analysis and Boruta Algorithm. Finally, the comparison between RF and PLSR combined with eight spectral reflectance transformation methods was conducted for four concentration groups to determine the optimal model. The results indicated that: (1) Zn contents represented a skewed distribution (coefficient of variation (CV) = 33%); (2) the spectral reflectance tended to decrease with the increase of Zn contents during 580-1850 nm based on Savitzky-Golay smoothing (SG); (3) the continuous wavelet transform (CWT) demonstrated higher effectiveness than other spectral reflectance transformation methods in enhancing spectral responses, the R2 between Zn contents and the soil spectral reflectance achieved the highest (R2 = 0.71) by using CWT; (4) the RF combined with CWT exhibited the best performance than other methods in the current study (R2 = 0.97, RPD = 3.39, RMSE = 1.05 mg kg-1, MAE = 0.79 mg kg-1). The current study supplied a scientific scheme and theoretical support for predicting heavy metals concentrations via the Vis-NIR spectral method in possible contaminated areas such as coal mines and metallic mineral deposit areas.

Responses of fungal communities along a chronosequence succession in soils of a tailing dam with reclamation by Heteropogon contortus

Phytoremediation can obviously change the fungal communities in the soils, which will significantly impact carbon (C) and nitrogen (N) cycling in ecological system. So far, the relationship between soil fungal communities and environmental factors is still poorly understood along a long chronosequence. In this study, fungal communities in the surface and rhizosphere soils of a tailing dam with Heteropogon contortus phytoremediation were investigated to explore the evolution of fungal community in a span of 50 years. The results showed that microbial community diversity increases along with time series of Heteropogon contortus phytoremediation. The dominant Dothideomycetes (20.86%), Agaricomycetes (18.09%), and Arthoniomycetes (1.69%) in rhizosphere soils were relatively higher than those in topsoil (13.9%, 2.65%, and 0.20%) at class level. Spearman correction analysis by phylum level was conducted to detect whether microflora was related to soil Physico-chemical properties, which affecting the composition of fungal communities along with the Heteropogon contortus phytoremediation. The nitrogen cycle indicators represented good linear correlations as chronosequence goes on, the indexes in the rhizosphere soil were much higher than those in the surface soils and the highest level has occurred in the 47-year-old Heteropogon contortus phytoremediation. The relative abundance of plant pathogen, wood saprotroph, dung saprotroph, and Arbuscular Mycorrhizal showed an upward tendency in rhizosphere soils along with the Heteropogon contortus phytoremediation. The highest soil fungal communities abundance and diversity were possibly attributed to the high-quality Heteropogon contortus litter returning to the ground and artificial disturbance treatments. Such changes in soil fungal communities might demonstrate a significant step forward and provided theoretical support for the biological governance of Heteropogon contortus phytoremediation in 50 years. Our study provides an insight on microbial communities connecting with soil C, N, P and S cycles and community functions in a complex plant-fungal-soil system along a long chronosequence in mine micro-ecology.

Copper Content Inversion of Copper Ore Based on Reflectance Spectra and the VTELM Algorithm

Copper is an important national resource, which is widely used in various sectors of the national economy. The traditional detection of copper content in copper ore has the disadvantages of being time-consuming and high cost. Due to the many drawbacks of traditional detection methods, this paper proposes a new method for detecting copper content in copper ore, that is, through the spectral information of copper ore content detection method. First of all, we use chemical methods to analyze the copper content in a batch of copper ores, and accurately obtain the copper content in those ores. Then we do spectrometric tests on this batch of copper ore, and get accurate spectral data of copper ore. Based on the data obtained, we propose a new two hidden layer extreme learning machine algorithm with variable hidden layer nodes and use the regularization standard to constrain the extreme learning machine. Finally, the prediction model of copper content in copper ore is established by using the algorithm. Experiments show that this method of detecting copper ore content using spectral information is completely feasible, and the algorithm proposed in this paper can detect the copper content in copper ores faster and more accurately.

Remote Sensing of Mine Site Rehabilitation for Ecological Outcomes: A Global Systematic Review

The mining industry has been operating across the globe for millennia, but it is only in the last 50 years that remote sensing technology has enabled the visualization, mapping and assessment of mining impacts and landscape recovery. Our review of published literature (1970–2019) found that the number of ecologically focused remote sensing studies conducted on mine site rehabilitation increased gradually, with the greatest proportion of studies published in the 2010–2019 period. Early studies were driven exclusively by Landsat sensors at the regional and landscape scales while in the last decade, multiple earth observation and drone-based sensors across a diverse range of study locations contributed to our increased understanding of vegetation development post-mining. The Normalized Differenced Vegetation Index (NDVI) was the most common index, and was used in 45% of papers; while research that employed image classification techniques typically used supervised (48%) and manual interpretation methods (37%). Of the 37 publications that conducted error assessments, the average overall mapping accuracy was 84%. In the last decade, new classification methods such as Geographic Object-Based Image Analysis (GEOBIA) have emerged (10% of studies within the last ten years), along with new platforms and sensors such as drones (15% of studies within the last ten years) and high spatial and/or temporal resolution earth observation satellites. We used the monitoring standards recommended by the International Society for Ecological Restoration (SER) to determine the ecological attributes measured by each study. Most studies (63%) focused on land cover mapping (spatial mosaic); while comparatively fewer studies addressed complex topics such as ecosystem function and resilience, species composition, and absence of threats, which are commonly the focus of field-based rehabilitation monitoring. We propose a new research agenda based on identified knowledge gaps and the ecological monitoring tool recommended by SER, to ensure that future remote sensing approaches are conducted with a greater focus on ecological perspectives, i.e., in terms of final targets and end land-use goals. In particular, given the key rehabilitation requirement of self-sustainability, the demonstration of ecosystem resilience to disturbance and climate change should be a key area for future research.

Estimation of Soil Arsenic Content with Hyperspectral Remote Sensing

With the continuous application of arsenic-containing chemicals, arsenic pollution in soil has become a serious problem worldwide. The detection of arsenic pollution in soil is of great significance to the protection and restoration of soil. Hyperspectral remote sensing is able to effectively monitor heavy metal pollution in soil. However, due to the possible complex nonlinear relationship between soil arsenic (As) content and the spectrum and data redundancy, an estimation model with high efficiency and accuracy is urgently needed. In response to this situation, 62 samples and 27 samples were collected in Daye and Honghu, Hubei Province, respectively. Spectral measurement and physical and chemical analysis were performed in the laboratory to obtain the As content and spectral reflectance. After the continuum removal (CR) was performed, the stable competitive adaptive reweighting sampling algorithm coupled the successive projections algorithm (sCARS-SPA) was used for characteristic band selection, which effectively solves the problem of data redundancy and collinearity. Partial least squares regression (PLSR), radial basis function neural network (RBFNN), and shuffled frog leaping algorithm optimization of the RBFNN (SFLA-RBFNN) were established in the characteristic wavelengths to predict soil As content. These results show that the sCARS-SPA-SFLA-RBFNN model has the best universality and high prediction accuracy in different land-use types, which is a scientific and effective method for estimating the soil As content.

Hyperspectral Estimation of Soil Organic Matter Content using Different Spectral Preprocessing Techniques and PLSR Method

Soil organic matter (SOM) is the main source of soil nutrients, which are essential for the growth and development of agricultural crops. Hyperspectral remote sensing is one of the most efficient ways of estimating the SOM content. Visible, near infrared, and mid-infrared reflectance spectroscopy, combined with the partial least squares regression (PLSR) method is considered to be an effective way of determining soil properties. In this study, we used 54 different spectral pretreatments to preprocess soil spectral data. These spectral pretreatments were composed of three denoising methods, six data transformations, and three dimensionality reduction methods. The three denoising methods included no denoising (ND), Savitzky–Golay denoising (SGD), and wavelet packet denoising (WPD). The six data transformations included original spectral data, R; reciprocal, 1/R; logarithmic, log(R); reciprocal logarithmic, log(1/R); first derivative, R’; and first derivative of reciprocal, (1/R)’. The three dimensionality reduction methods included no dimensionality reduction (NDR), sensitive waveband dimensionality reduction (SWDR), and principal component analysis (PCA) dimensionality reduction (PCADR). The processed spectra were then employed to construct PLSR models for predicting the SOM content. The main results were as follows—(1) the wavelet packet denoising (WPD)-R’ and WPD-(1/R)’ data showed stronger correlations with the SOM content. Furthermore, these methods could effectively limit the correlation between the adjacent bands and, thus, prevent “overfitting”. (2) Of the 54 pretreatments investigated, WPD-(1/R)’-PCADR yielded the model with the highest accuracy and stability. (3) For the same denoising method and spectral transformation data, the accuracy of the SOM content estimation model based on SWDR was higher than that of the model based on NDR. Furthermore, the accuracy in the case of PCADR was higher than that for SWDR. (4) Dimensionality reduction was effective in preventing data overfitting. (5) The quality of the spectral data could be improved and the accuracy of the SOM content estimation model could be enhanced effectively, by using some appropriate preprocessing methods (one combining WPD and PCADR in this study).

Estimation of Soil Heavy Metal Content Using Hyperspectral Data

Quickly and efficiently monitoring soil heavy metal content is crucial for protecting the natural environment and for human health. Estimating heavy metal content in soils using hyperspectral data is a cost-efficient method but challenging due to the effects of complex landscapes and soil properties. One of the challenges is how to make a lab-derived model based on soil samples applicable to mapping the contents of heavy metals in soil using air-borne or space-borne hyperspectral imagery at a regional scale. For this purpose, our study proposed a novel method using hyperspectral data from soil samples and the HuanJing-1A (HJ-1A) HyperSpectral Imager (HSI). In this method, estimation models were first developed using optimal relevant spectral variables from dry soil spectral reflectance (DSSR) data and field observations of soil heavy metal content. The relationship of the ratio of DSSR to moisture soil spectral reflectance (MSSR) with soil moisture content was then derived, which built up the linkage of DSSR with MSSR and provided the potential of applying the models developed in the laboratory to map soil heavy metal content at a regional scale using hyperspectral imagery. The optimal relevant spectral variables were obtained by combining the Boruta algorithm with a stepwise regression and variance inflation factor. This method was developed, validated, and applied to estimate the content of heavy metals in soil (As, Cd, and Hg) in Guangdong, China, and the Conghua district of Guangzhou city. The results showed that based on the validation datasets, the content of Cd could be reliably estimated and mapped by the proposed method, with relative root mean square error (RMSE) values of 17.41% for the point measurements of soil samples from Guangdong province and 17.10% for the Conghua district at the regional scale, while the content of heavy metals As and Hg in soil were relatively difficult to predict with the relative RMSE values of 32.27% and 28.72% at the soil sample level and 51.55% and 36.34% at the regional scale. Moreover, the relationship of the DSSR/MSSR ratio with soil moisture content varied greatly before the wavelength of 1029 nm and became stable after that, which linked DSSR with MSSR and provided the possibility of applying the DSSR-based models to map the soil heavy metal content at the regional scale using the HJ-1A images. In addition, it was found that overall there were only a few soil samples with the content of heavy metals exceeding the health standards in Guangdong province, while in Conghua the seriously polluted areas were mainly distributed in the cities and croplands. This study implies that the new approach provides the potential to map the content of heavy metals in soil, but the estimation model of Cd was more accurate than those of As and Hg.

Hyperspectral Prediction Model of Metal Content in Soil Based on the Genetic Ant Colony Algorithm

The accumulation of metals in soil harms human health through different channels. Therefore, it is very important to conduct fast and effective non-destructive prediction of metals in the soil. In this study, we investigate the characteristics of four metal contents, namely, Sb, Pb, Cr, and Co, in the soil of the Houzhai River Watershed in Guizhou Province, China, and establish the content prediction back propagation (BP) neural network and genetic-ant colony algorithm BP (GAACA-BP) neural network models based on hyperspectral data. Results reveal that the four metals in the soil have different degrees of accumulation in the study area, and the correlation between them is significant, indicating that their sources may be similar. The fitting effect and accuracy of the GAACA-BP model are greatly improved compared with those of the BP model. The R values are above 0.7, the MRE is reduced to between 6% and 15%, and the validation accuracy is increased by 12–64%. The prediction ability of the model of the four metals is Cr > Co > Sb > Pb. These results indicate the possibility of using hyperspectral techniques to predict metal content.