Microwave-assisted synthesis of polyamine-functionalized carbon dots from xylan and their use for the detection of tannic acid

Increasing gold nanostars SERS response with silver shells: a surface-based seed-growth approach

A straightforward method to prepare surface enhanced Raman spectroscopy (SERS) chips containing a monolayer of silver coated gold nanostars (GNS@Ag) grafted on a glass surface is introduced. The synthetic approach is based on a seed growth method performed directly on surface, using GNS as seeds, and involving a green pathway, which only uses silver nitate, ascorbic acid and water, to grow the silver shell. The preparation was optimized to maximize signals obtaining a SERS response of one order of magnitude greater than that from the original GNS based chips, offering in the meantime good homogeneity and acceptable reproducibility. The proposed GNS@Ag SERS chips are able to detect pesticide thiram down to 20 ppb.

Exploring the potential of cellulose autofluorescence for optical detection of tannin in red wines

The growing demand for opto-electronic devices within an automated landscape has opened up new opportunities for harnessing sustainable cellulose materials for sensors technology. Cellulose, a versatile material, enables its combination with other materials, but in most of these applications, cellulose is typically employed as support or substrate, while its inherent autofluorescence remains largely underexplored for sensors. In light of this context, this study delves into the autofluorescence characteristics of pristine cellulose nanocrystals extracted from wood via enzymatic route for optical sensors tailored to detect tannins. By fine-tuning the experimental setup, photoluminescence (PL) emission bands were scrutinized across three distinct spectral regions, namely 300-400 nm, 400-500 nm and 550-700 nm. The proposed mechanism reveals the occurrence of dynamic fluorescence quenching, which enabled the selective monitoring of tannins in red wines across a dynamic range spanning from 10 to 1060 μg mL-1. This sensing platform provided a limit of detection (LoD) of 6.1 μg mL-1. Notably, the sensing platform's efficacy was validated with remarkable recovery rates of 99.7 % and 95.3 % when subjected to testing with cabernet sauvignon and tannat wines. These findings emphasize the sensing platform's potential for monitoring tannic acids in beverages and food products.

Oyster-inspired carbon dots-functionalized silica and dialdehyde chitosan to fabricate a soy protein adhesive with high strength, mildew resistance, and long-term water resistance

Developing multifunctional adhesives with exceptional cold-pressing strength, water resistance, toughness, and mildew resistance remains challenging. Herein, inspired by oysters, a multifunctional organic-inorganic hybrid soybean meal (SM)-based adhesive was fabricated by incorporating amino-modified carbon dots functionalized silica nanoparticles (CDs@SiO2) and dialdehyde chitosan (DCS) into SM matrix. DCS effectively enhanced the interface interactions of organic-inorganic phases and the rigid nanofillers CDs@SiO2 uniformly dispersed in the SM matrix, which provided energy dissipation to improve the adhesive's toughness. Owing to the stiff skeleton structure and enhanced crosslinking density, the crosslinker-modified SM (MSM)/DCS/CDs@SiO2-2 wood adhesive exhibited outstanding cold-pressing strength (0.74 MPa), wet shear strength (1.36 MPa), and long-term water resistance (49 d). Additionally, the resultant adhesive showed superior antimildew and antibacterial properties benefiting from the introduction of DCS. Intriguingly, the fluorescent properties endowed by carbon dots further broadened the application of adhesives for realizing security testing. This study opens a new pathway for the synthesis of multifunctional biomass adhesives in industrial and household applications.

Lignocellulosic Biomass-Based Carbon Dots: Synthesis Processes, Properties, and Applications

Carbon dots (CDs), a new type of carbon-based fluorescent nanomaterial, have attracted widespread attention because of their numerous excellent properties. Lignocellulosic biomass is the most abundant renewable natural resource and possesses broad potential to manufacture different composite and smart materials. Numerous studies have explored the potential of using the components (such as cellulose, hemicellulose, and lignin) in lignocellulosic biomass to produce CDs. There are few papers systemically aiming in the review of the state-of-the-art works related to lignocellulosic biomass-derived CDs. In this review, the significant advances in synthesis processes, formation mechanisms, structural characteristics, optical properties, and applications of lignocellulosic biomass-based CDs such as cellulose-based CDs, hemicellulose-based CDs and lignin-based CDs in latest research are reviewed. In addition, future research directions on the improvement of the synthesis technology of CDs using lignocellulosic biomass as raw materials to enhance the properties of CDs are proposed. This review will serve as a road map for scientists engaged in research and exploring more applications of CDs in different science fields to achieve the highest material performance goals of CDs.

Development of water-dispersible Dy(III)-based organic framework as a fluorescent and electrochemical probe for quantitative detection of tannic acid in real alcoholic and fruit beverages

Tannic acid (TA) is a water-soluble polyphenol and used in beverages, medical fields as clarifying and additive agents. In daily life, TA is unavoidable, and excessive consumption of tannin containing foods can harm health. Thus, rapid and sensitive quantification is highly necessary. Herein, an eco-friendly fluorometric and electrochemical sensing of TA was developed based on a dysprosium(III)-metal-organic framework (Dy(III)-MOF). An aqueous dispersion of Dy(III)-MOF exhibits strong dual emissions at 479 and 572 nm with an excitation at 272 nm, due to the 4f-4f electronic transition and "antenna effect". Chromophore site of the functional ligand, and Dy(III) ion could potentially serve as a sensing probe for TA via quenching (fluorescence). The fluorometric sensor worked well in a wide linear range concentrations from 0.02 to 25 μM with a limit of detection (LOD) of 0.0053 μM. Secondly, the cyclic voltammetric of TA at Dy(III)-MOF modified screen-printed carbon electrode (SPCE) has been investigated. The Dy(III)-MOF/SPCE showed an anodic peak signal at +0.22 V with a five-fold stronger current than the control electrode surface. Under optimized sensing parameters, the Dy(III)-MOF/SPCE delivered wide linear concentrations from 0.01 to 200 μM with a LOD of 0.0023 μM (S/N = 3). Accessibility of real practical samples in alcoholic and juice-based beverages were quantified, resulting in superior recovery rates (98.13-99.53%), F-test, and t-test confirmed high reliability (<95% confidence level (n = 3)). Finally, practicability result of the electrochemical method was validated by fluorometric with a relative standard deviation (RSD) of 0.18-0.46 ± 0.17% (n = 3). The designed probe has proven to be a key candidate for the accurate analysis of TA in beverage samples to ensure food quality.

Straightforward smartphone assay for quantifying tannic acid in beverages based on colour change of Eu3+/polyethyleneimine complex

Tannic acid (TA)-a natural product-is a polyphenol derivative that occurs in certain kinds of beverages. A large amount of TA could give rise to an unpleasant flavour and could negatively affect the human body by causing stomach irritation, abdominal pain, nausea, vomiting, and even death. Thus, the need exists for a simple TA detection procedure that meets specific criteria such as on-site analysis, portability, and affordability. Herein, we present a new TA assay, which is based on the fluorescent quenching effect of an efficient fluorophore, and which comprises a smartphone-integrated homemade reader system. The fluorescent polyethyleneimine-derivatised polymer (FP), a strong emitter at 510 nm, was synthesised with the aid of a facile sonication method. In the presence of Eu³⁺ ions, TA quenches the fluorescence of the FP via electrostatic interaction. A smartphone was used to capture an image of the FP undergoing fluorescence for conversion to RGB values. The blue channel was chosen for further analysis because it offered the highest R²-value compared to the red and green channels. We verified these results using a commercial spectrofluorometer and calculated the limit of detection of this assay as 87 nM and 20 nM for the homemade reader and spectrofluorometer, respectively. The detection range for TA with the proposed assay is 0.16-66.66 μM. The application of the proposed method to real beverage samples for TA detection demonstrates its analytical applicability.

High-loading Cu single-atom nanozymes supported by carbon nitride with peroxidase-like activity for the colorimetric detection of tannic acid

The design of nanozymes with high metal atom loading is of great significance to improve enzyme activity and is also the key to furthering the construction of highly sensitive colorimetric sensors. In this work, a colorimetric sensor for the quantitative analysis of tannic acid (TA) was developed based on two-dimensional carbon nanosheet carbon nitride (CN)-supported Cu single-atom nanozymes (Cu/CN). Cu/CN was synthesized by supramolecular preorganization and calcination, with an ultrathin nanosheet structure and a high density of Cu active sites, with a Cu loading of up to 14.3 wt%. Benefiting from the above characteristics, Cu/CN exhibits peroxidase-mimicking activity and excellent catalytic performance. Therefore, a colorimetric sensor was constructed for the fast and sensitive quantitative analysis of TA with good linearity in the range of 0.09-3.2 μM and a low detection limit of 30 nM. Furthermore, the sensor was successfully applied to the analysis of TA in tea samples of different varieties. This work sheds new light on the design of nanozymes with a high density of active sites and the analysis of TA in real environments.

Advances in Fluorescent Sensing Carbon Dots: An Account of Food Analysis

Illuminating the use of nanomaterials, carbon quantum dots (CQDs) have transfigured the food safety arena because of their bright luminescence, optical properties, low toxicity, and enhanced biocompatibility. Therefore, fluorescent resonance energy transfer, photoinduced electron transfer, and an internal filtering effect mechanism allow precise detection of food additives, heavy metal ions, pathogenic bacteria, veterinary drug residues, and food nutrients. In this review, we describe the primal mechanism of CQD-based fluorescence sensors for food safety inspection. This is an abridged description of the nanodesign and future perspectives of more advanced CQD-based sensors for food safety analysis.

Fluorescence determination of tannic acid imprinted in conjugated hypercrosslinked polymers by Friedel-Crafts acylation

A molecularly imprinted hypercrosslinked polymer (HCP) was synthesized from the polymerization of mesitylene monomer, terephthaloyl chloride crosslinker, and tannic acid (TA) template through FeCl₃-catalyzed Friedel-Crafts acylation. The TA-imprinted HCP (TAHCP) was capable of IUPAC Type I mesoporosity, with specific surface area of 1258 m² g^-1, monolayer adsorption capacity of 289 cm² g^-1, pore sizes ranging from 4.4 to 12.6 Å, amorphous morphology, and characteristic absorption and emission bands. The extended π-conjugation framework of TAHCP was endowed with 385-nm fluorescent emission at 310-nm excitation. The fluorescence intensity of TAHCP could be dynamically quenched by TA and was linearly correlated with 20-1000 nM TA concentrations on the Stern-Volmer plot in the optimized conditions of pH 5.5 buffer, 100 μg mL^-1 TAHCP, and 3.5 min equilibrium. The relative standard deviation (RSD) for 50 nM TA was 3.4% (n = 5), and the limit of detection was 6.2 nM based on the 3σ of the TA blanks). For 50nM TA, the imprinted factor was calculated to be 7.8, and the selectivity for 250 nM interferents, including ions, organic acids, saccharides, amino acids, and caffeine, which are commonly found in beverages, was 7.5-9.5, except for gallic acid (1.2). The recoveries of TA spiked in tea and juice beverages at three levels (10-150 nM) were 93.6-101.9% (RSD = 3.6-4.3%).

Surface-Enhanced Raman Spectroscopy Chips Based on Silver Coated Gold Nanostars

Surface-enhanced Raman scattering (SERS) is becoming widely used as an analytical tool, and the search for stable and highly responsive SERS substrates able to give ultralow detection of pollutants is a current challenge. In this paper we boosted the SERS response of Gold nanostars (GNS) demonstrating that their coating with a layer of silver having a proper thickness produces a 7-fold increase in SERS signals. Glass supported monolayers of these GNS@Ag were then prepared using simple alcoxyliane chemistry, yielding efficient and reproducible SERS chips, which were tested for the detection of molecules representative of different classes of pollutants. Among them, norfloxacin was detected down to 3 ppb, which is one of the lowest limits of detection obtained with this technique for the analyte.

Chlorophyll Detection by Localized Surface Plasmon Resonance Using Functionalized Carbon Quantum Dots Triangle Ag Nanoparticles

An optical sensor-based localized surface plasmon resonance (LSPR) sensor was demonstrated for sensitive and selective chlorophyll detection through the integration of amino-functionalized carbon quantum dots (NCQD) and triangle silver nanoparticles (AgNPs). The additions of amino groups to the CQD enhance the detection of chlorophyll through electrostatic interactions. AgNPs-NCQD composite was fabricated on the surface of the silanized glass slide using the self-assembly technique. The experimental results showed that the AgNPs-NCQD film-based LSPR sensor detects better than AgNPs and AgNPs-CQD films with a good correlation coefficient (R² = 0.9835). AgNPs-NCQD showed a high sensitivity response of 2.23 nm ppm^-1. The detection and quantification limits of AgNPs-NCQD are 1.03 ppm and 3.40 ppm, respectively, in the range of 0.05 to 6 ppm. Throughout this study, no significant interference was observed among the other ionic species (NO₂^-, PO₄^-, NH₄⁺, and Fe³⁺). This study demonstrates the applicability of the proposed sensor (AgNPs-NCQD) as a sensing material for chlorophyll detection in oceans.

Influence of End-Capped Modifications in the Nonlinear Optical Amplitude of Nonfullerene-Based Chromophores with a D-π-A Architecture: A DFT/TDDFT Study

Nonlinear optical (NLO) materials have several uses in many fields such as solid physics, biology, medicine, nuclear physics, and material research. Therefore, a series of nonfullerene-based derivatives (CC10D1-CC10D8) with a D-π-A configuration was planned for the NLO investigation using CC10R as the reference molecule with structural alternations at acceptor moieties. Natural bonding orbital (NBO), UV-vis spectra, frontier molecular orbitals (FMOs), global reactivity parameters (GRPs), transition density matrix (TDM), and density of states (DOS) were analyzed using the M06/6-311G(d,p) functional in chloroform solvent to understand the NLO responses of CC10R and CC10D1-CC10D8. The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) band gaps of CC10D1-CC10D6 were illustrated to be lower than that of CC10R, with the larger bathochromic shift (726.408-782.674 nm) resulting in a significant NLO response. Along with the band gap, the FMO method also identified an efficient interfacial charge transfer from D to A moieties via a π-bridge, which was further supported by the DOS and TDM map. Moreover, NBO calculations demonstrated that extended hyperconjugation and strong internal molecular interactions were important in their stabilization. The dipole moment (μ), linear polarizability ⟨α⟩, hyperpolarizability (β_total), and second-order hyperpolarizability (γ_total.) were studied for CC10R and CC10D1-CC10D8. Among all of the derivatives, CC10D2 was proven to be the most appropriate candidate because of its suitable NLO behavior such as being well-supported by a reduced band gap (2.093 eV) and having a suitable maximum absorption wavelength (782.674 nm). Therefore, CC10D2 was reported to have a greater value of first hyperpolarizability (208 659.330 a.u.) compared with other derivatives and CC10R. For the second hyperpolarizability, a greater value was obtained for CC10R (5.855 × 10⁷ a.u.), and its derivatives showed results comparable to that of the parent chromophore for γ_total. This theoretical framework reveals that structural customization with different acceptor units plays a significant role in obtaining attractive NLO materials for optoelectronic applications.

Luminescent Composite Carbon/SiO2 Structures: Synthesis and Applications

Luminescent carbon nanostructures (CNSs) have attracted great interest from the scientific community due to their photoluminescent properties, structural features, low toxicity, and a great variety of possible applications. Unfortunately, a few problems hinder their further development. These include the difficulties of separating a mixture of nanostructures after synthesis and the dependence of their properties on the environment and the aggregate state. The application of a silica matrix to obtain luminescent composite particles minimizes these problems and improves optical properties, reduces photoluminescence quenching, and leads to wider applications. We describe two methods for the formation of silica composites containing CNSs: inclusion of CNSs into silica particles and their grafting onto the silica surface. Moreover, we present approaches to the synthesis of multifunctional particles. They combine the unique properties of silica and fluorescent CNSs, as well as magnetic, photosensitizing, and luminescent properties via the combination of functional nanoparticles such as iron oxide nanoparticles, titanium dioxide nanoparticles, quantum dots (QDs), and gold nanoclusters (AuNCs). Lastly, we discuss the advantages and challenges of these structures and their applications. The novelty of this review involves the detailed description of the approaches for the silica application as a matrix for the CNSs. This will support researchers in solving fundamental and applied problems of this type of carbon-based nanoobjects.

Preparation, Properties, and Application of Lignocellulosic-Based Fluorescent Carbon Dots

Carbon dots (CDs) are a relatively new type of fluorescent carbon material with excellent performance and widespread application. As the most readily available and widely distributed biomass resource, lignocellulosics are a renewable bioresource with great potential. Research into the preparation of CDs with lignocellulose (LC-CDs) has become the focus of numerous researchers. Compared with other carbon sources, lignocellulose is low cost, rich in structural variety, exhibits excellent biocompatibility,^[1] and the structures of CDs prepared by lignin, cellulose, and hemicellulose are similar. This Review summarized research progress in the preparation of CDs from lignocellulosics in recent years and reviewed traditional and new preparation methods, physical and chemical properties, optical properties, and applications of LC-CDs, providing guidance for the formation and improvement of LC-CDs. In addition, the challenges of synthesizing LC-CDs were also highlighted, including the interaction of different lignocellulose components on the formation of LC-CDs and the nucleation and growth mechanism of LC-CDs; from this, current trends and opportunities of LC-CDs were examined, and some research methods for future research were put forward.

Ultrasensitive Pd nano catalyst as peroxidase mimetics for colorimetric sensing and evaluation of antioxidants and total polyphenols in beverages and fruit juices

Herein, we developed a new Pd NP from the aq extract of Elsholtzia blanda Benth. flower that showed efficient peroxidase mimetic activity. The catalytic mechanism was confirmed through colorimetric analysis. The optimizations of temperature, concentration, P^H and time were done to find out the best procedure to implement the intrinsic catalytic activity in practical applications. Michaelis-Menten constants were evaluated for both TMB and H₂O₂ substrate to investigate the affinity of Pd NP towards them. K_m was observed to be 42.35 mM for H₂O₂ and 0.0076 mM for TMB. Antioxidants were sensed using the peroxidase mimetic property up to nanomolar levels with a LOD = 0.78 nM for Gallic acid 0.85 nM for Tannic acid. The method was further implemented in comparing the radical scavenging power of different phenolic compounds. Smart-phone based analysis was done for observing the change in colour which could further be utilized as an analytical tool for study the antioxidant activity. R-Square values of 0.97 and 0.96 for detection of gallic acid and tannic acid respectively suggest good linearity of the plot. Lastly, the system was utilized in the evaluation of total antioxidant capacity (TAC) and total phenolic content (TPC) in commercially available juices and beverages.

One-pot alkali cutting-assisted synthesis of fluorescence tunable amino-functionalized graphene quantum dots as a multifunctional nanosensor for sensing of pH and tannic acid

Herein, a one-pot alkali cutting-assisted synthesis approach has been developed to gain fluorescence (FL) tunable amino functionalized GQDs (NH₂-GQDs), which exhibit concentration- and excitation-dependent FL behaviors, due to the self-assembled J-type aggregation effect and different electronic transitions governed by graphene basal plane and functional groups. While NH₂-GQDs possess brighter FL emission than pristine GQDs, owning to the functionalization of amino groups with strong electron withdrawing ability. Particularly, the pH-dependent FL behavior of NH₂-GQDs further reflects the FL emission mechanism originated from the intrinsic zigzag sites and introduced amino and carboxylic groups, which is available for pH sensing. Moreover, the NH₂-GQDs also show a FL quenching upon reaction with tannic acid (TA), resulting in the construction of a FL turn-off TA sensing platform. A good linear relationship is obtained between logarithm of FL intensity (log F) and TA concentration in a linear dynamic range of 1-40 μM and a limit of detection of 43.3 nM (3σ/s, n = 9) is achieved, with a precision of 0.08% RSD at a concentration level of 5 μM (n = 9). This work features a simple and direct approach to acquire multifunctional nanosensor, providing great potential for further applications in chem/biosensing.

Fabrication of fluorescence sensor based on molecularly imprinted polymer on amine-modified carbon quantum dots for fast and highly sensitive and selective detection of tannic acid in food samples

Developing a rapid and accurate method for tannic acid (TA) detection and measurement is necessary due to its extensive applications in the food industry. In this work, a fluorescence sensor with a low limit of detection was synthesized for TA for the first time. First, amine-modified carbon quantum dots (a-CQDs) with high-quantum yield were synthesized by the hydrothermal method. A layer of molecularly imprinted polymer (MIP) was then placed on a-CQDs by the surface printing method to increase the sensor selectivity. The mechanism of TA detection by the prepared a-CQDs/MIPs was quenching the fluorescence intensity of a-CQDs in the presence of TA due to the transfer of electrons from the TA to the a-CQDs. The linear range of the sensor response was at the TA concentration of 1-200 nmol L^-1 and its detection limit was 0.6 nmol L^-1 under optimal conditions. Finally, the sensor was used to measure TA in grape juice, green tea, and black tea samples using the recovery method. Recovery values between 97.4 and 103.6% and RSDs less than 3.8% indicated the high potential of the prepared sensor for TA analysis in complex food samples.

Photoluminescent Recognition of Strong Alcoholic Beverages with Carbon Nanoparticles

A simple sensitive method for nonspecific recognition of armagnac, cognac, whiskey, and ethanol/water mixture was developed by using photoluminescence (PL) of carbon nanoparticles (NPs). The carbon NPs were synthesized from the mixture of urea and anhydrous citric acid, followed by few annealing processes to achieve the full effect by solvothermal carbonization. PL features of carbon NPs depend on the alcohol environments in which the NPs are dispersed. PL/PL excitation maps of the alcoholic beverages were mathematically treated, and a final principal component analysis diagram allows visualization of different clusters corresponding to each beverage. The optimal measurement conditions (concentration of NPs in colloidal solution and excitation wavelength) were defined to ensure a reliable recognition level.

Microwave-assisted conversion of palm kernel shell biomass waste to photoluminescent carbon dots

In the present work, palm kernel shell (PKS) biomass waste has been used as a low-cost and easily available precursor to prepare carbon dots (CDs) via microwave irradiation method. The impacts of the reacting medium: water and diethylene glycol (DEG), and irradiation period, as well as the presence of chitosan on the CDs properties, have been investigated. The synthesized CDs were characterized by several physical and optical analyses. The performance of the CDs in terms of bacteria cell imaging and copper (II) ions sensing and removal were also explored. All the CDs possessed a size of 6-7 nm in diameter and the presence of hydroxyl and alkene functional groups indicated the successful transformation of PKS into CDs with carbon core consisting of C = C elementary unit. The highest quantum yield (44.0%) obtained was from the CDs synthesised with DEG as the reacting medium at irradiation period of 1 min. It was postulated that the high boiling point of DEG resulted in a complete carbonisation of PKS into CDs. Subsequently, the absorbance intensity and photoluminescence intensity were also much higher compared to other precursor formulation. All the CDs fluoresced in the bacteria culture, and fluorescence quenching occurred in the presence of heavy metal ions. These showed the potential of CDs synthesised from PKS could be used for cellular imaging and detection as well as removal of heavy metal ions.

Sensor and Bioimaging Studies Based on Carbon Quantum Dots: The Green Chemistry Approach

Since carbon quantum dots have high photoluminescent efficiency, it has been a desired material in sensor and bioimaging applications. In recent years, the green chemistry approach has been preferred and the production of quantum dots has been reported in many studies using different precursors from natural, abundant, or waste sources. Hydrothermal, chemical oxidation, microwave supported, ultrasonic, solvothermal, pyrolysis, laser etching, solid-state, plasma, and electrochemical methods have been reported in the literature. In this review article, green chemistry strategies for carbon quantum dot synthesis is summarized and compared with conventional methods using methodologic and statistical data. Furthermore, a detailed discussion on sensor and bioimaging applications of carbon quantum dots produced with green synthesis approaches are presented with a special focus on the last decade.

Efficient preparation of nitrogen-doped fluorescent carbon dots for highly sensitive detection of metronidazole and live cell imaging

Herein, nitrogen-doped carbon dots (N-CDs) emitting blue fluorescence were prepared using L-tartaric acid and triethylenetetramine through a simple and quick microwave-assisted method. The synthesized N-CDs displayed excitation-dependent fluorescence behavior, and their maximum excitation and emission wavelengths were 350 and 425 nm, respectively. The obtained N-CDs, which featured excellent fluorescence properties with a high fluorescence quantum yield of 31%, were applied to detect metronidazole (MNZ), which can effectively quench the fluorescence intensity of N-CDs due to the inner filter effect. This phenomenon was used as basis to develop a label-free fluorescent method for rapid MNZ determination, with the limit of detection of 0.22 μM and corresponding linear range of 0.5-22 μM. Hence, we had established a fluorescence method for MNZ detection and applied it to detect MNZ in real samples with satisfactory results. Finally, N-CDs with superior biocompatibility were applied for cell imaging and MNZ detection by the changes in fluorescence intensity.

Fluorescent Carbon Quantum Dots-Synthesis,Functionalization and Sensing Application in FoodAnalysis

Carbon quantum dots (CQDs) with stable physicochemical properties are one of theemerging carbon nanomaterials that have been studied in recent years. In addition to the excellentoptical properties such as photoluminescence, photobleaching resistance and light stability, thismaterial also has favorable advantages of good biocompatibility and easy functionalization, whichmake it an ideal raw material for constructing sensing equipment. In addition, CQDs can combinedwith other kinds of materials to form the nanostructured composites with unique properties, whichprovides new insights and ideas for the research of many fields. In the field of food analysis,emerging CQDs have been deeply studied in food composition analysis, detection and monitoringtrace harmful substances and made remarkable research progress. This article introduces andcompares the various methods for CQDs preparation and reviews its related sensing applicationsas a new material in food components analysis and food safety inspection in recent years. It isexpected to provide a significant guidance for the further study of CQDs in the field of foodanalysis and detection. CQDs; synthesis; fluorescent sensing; food analysis.

N, S, I co-doped carbon dots for folic acid and temperature sensing and applied to cellular imaging

The application of fluorescent carbon dots in bio-imaging has huge positive significance in the field of biomedicine. By taking this advantage, herein we prepared nitrogen, sulfur and iodine doped carbon dots (N,S,I-CDs) by a facile hydrothermal reaction using C₃N₃S₃, potassium iodate (KIO₃) and ethylenediamine (EDA), and the obtained N,S,I-CDs show bright blue fluorescence with a high fluorescence quantum yield of about 32.4%. The prepared N, S, I-CDs could interact with the folic acid (FA) with high selectivity, lead to development of a high sensitive method for the FA detection from 0.1 to 175 μM wide linear range with a detection limit of 84 nM (S/N = 3) and also applied them in U-2 OS cells imaging. Moreover, this sensor possessed a good sensitivity, linearity and reversibility in the temperature range of 10-80 °C, and successfully applied for the temperature sensing in cell HT-29 samples. This investigation illustrates that as-prepared N, S, I-CDs probe may have great potential as a high-performance platform for the accurate recognition of temperature in cells and could provide a new tool for the detection of FA in cells.