Ficus retusa-stabilized gold and silver nanoparticles: Controlled synthesis, spectroscopic characterization, and sensing properties

Statistical optimization, characterization, antioxidant and antibacterial properties of silver nanoparticle biosynthesized by saw palmetto seed phenolic extract

On the global market, silver nanoparticles (Ag-NPs) are in high demand for their various applications in biomedicine, material engineering, and consumer products. This study highlighted the biosynthesis of the Ag-NPs using saw palmetto seed phenolic extract (SPS-phenolic extract), which contained vital antioxidant-phenolic compounds. Herein, central composite statistical design, response surface methodology, and sixteen runs were conducted to optimize Ag-NPs biosynthesis conditions for maximizing the production of Ag-NPs and their phenolic content. The best-produced SPS-Ag-NPs showed a surface plasmon resonance peak at 460 nm and nano-spherical sizes ranging from 11.17 to 38.32 nm using the UV spectrum analysis and TEM images, respectively. The produced SPS-Ag-NPs displayed a high negative zeta-potential value (- 32.8 mV) demonstrating their high stability. The FTIR analysis demonstrated that SPS-phenolic compounds were involved in sliver bio-reduction and in stabilizing, capping, and preventing Ag-NP aggregation. The thermogravimetric investigation revealed that the produced SPS-Ag-NPs have remarkable thermal stability. The produced SPS-Ag-NP exceeded total antioxidant activity (13.8 µmol Trolox equivalent) more than the SPS-phenolic extract (12.0 µmol Trolox equivalent). The biosynthesized SPS-Ag-NPs exhibited noticeably better antibacterial activity against multidrug-resistant Gram-negative E. coli and Gram-positive S. aureus compared to SPS-phenolic extract. Hence, the bio-synthesized SPS-Ag-NPs demonstrated great potential for use in biomedical and antimicrobial applications.

Biosynthesis of Gold and Silver Nanoparticles Using Phytochemical Compounds

Gold and silver nanoparticles are nanoparticles that have been widely used in various fields and have shown good benefits. The method of nanoparticle biosynthesis utilizing plant extracts, also known as green synthesis, has become a promising method considering the advantages it has compared to other synthesis methods. This review aims to give an overview of the phytochemical compounds in plants used in the synthesis of gold and silver nanoparticles, the nanoparticle properties produced using plant extracts based on the concentration and structure of phytochemical compounds, and their applications. Phytochemical compounds play an important role as reducing agents and stabilizers in the stages of the synthesis of nanoparticles. Polyphenol compounds, reducing sugars, and proteins are the main phytochemical compounds that are responsible for the synthesis of gold and silver nanoparticles. The concentration of phytochemical compounds affects the physical properties, stability, and activity of nanoparticles. This is important to know to be able to overcome limitations in controlling the physical properties of the nanoparticles produced. Based on structure, the phytochemical compounds that have ortho-substituted hydroxyl result in a smaller size and well-defined shape, which can lead to greater activity and stability. Furthermore, the optimal condition of the biosynthesis process is required to gain a successful reaction that includes setting the metal ion concentration, temperature, reaction time, and pH.

Drawbacks in the efficient monitoring of gold nanoparticle-based cisplatin delivery systems formation by HPLC-ICP-MS

Since chemotherapy suffers many limitations related to side effects of anticancer drugs (e.g. cisplatin - CDDP), nanoparticles are probed as carriers in targeted drug delivery. Gold nanoparticles (AuNPs) are broadly investigated due to their biocompatibility, nontoxicity, and tunable surface. Despite many AuNPs-cisplatin systems (AuNP-CS) reports found in the literature, only a few include studies of their synthesis and formation efficiency using analytical tools providing simultaneously qualitative and quantitative analytical information. Therefore, this research continues our previous study of AuNP-CS formation investigated by capillary electrophoresis with inductively coupled plasma mass spectrometry (ICP-MS). Namely, it presents the analogical approach but employs the coupling of another separation technique: isocratic reversed-phase high-performance liquid chromatography. The study concerns the difficulties of analytical method optimization path and contains a discussion of the observed problematic issues related to the analysis and preparation of AuNP-CS. Moreover, the presented work confronts the performance and applicability of both tools for the scrutiny of AuNP-CS, especially considering the comparison of their resolution power.

Functional silver nanoparticles synthesis from sustainable point of view: 2000 to 2023 ‒ A review on game changing materials

The green and facile synthesis of metallic silver nanoparticles (AgNPs) is getting tremendous attention for exploring superior applications because of their small dimensions and shape. AgNPs are already proven materials for superior coloration, biocidal, thermal, UV-protection, and mechanical performance. Originally, some conventional chemical-based reducing agents were used to synthesize AgNPs, but these posed potential risks, especially for enhanced toxicity. This became a driving force to innovate plant-based sustainable and green metallic nanoparticles (NPs). Moreover, the synthesized NPs using plant-based derivatives could be tuned and regulated to achieve the required shape and size of the AgNPs. AgNPs synthesized from naturally derived materials are safe, economical, eco-friendly, facile, and convenient, which is also motivating researchers to find greener routes and viable options, utilizing various parts of plants like flowers, stems, heartwood, leaves and carbohydrates like chitosan to meet the demands. This article intends to provide a comprehensive review of all aspects of AgNP materials, including green synthesis methodology and mechanism, incorporation of advanced technologies, morphological and elemental study, functional properties (coloration, UV-protection, biocidal, thermal, and mechanical properties), marketing value, future prospects and application, especially for the last 20 years or more. The article also includes a SWOT (Strengths, weaknesses, opportunities, and threats) analysis regarding the use of AgNPs. This report would facilitate the industries and consumers associated with AgNP synthesis and application through fulfilling the demand for sustainable, feasible, and low-cost product manufacturing protocols and their future prospects.

Green Synthesis of Silver Nanoparticles from Diospyros villosa Extracts and Evaluation of Antioxidant, Antimicrobial and Anti-Quorum Sensing Potential

The biosynthesis of silver nanoparticles (AgNPs) from Diospyros villosa leaves and stem bark extracts is described. The stem bark AgNPs of D. villosa synthesized at 80 °C (S80) showed good scavenging activity with a lower IC50 value of 8.75 µg·mL−1 compared to ascorbic acid (9.58 µg·mL−1). The total phenol content of the S80 AgNPs was measured and found to be 10.22 ± 0.14 mg.g−1 gallic acid equivalence (GAE). Bacterial growth inhibition (% GI) and violacein inhibition (% VI) of 10.08% and 58.83%, respectively, was observed against C.subtsugae CV017 with leaf AgNPs synthesized at 80 °C (L80) at 80 μg·mL−1. Stem bark AgNPs synthesized at room temperature (SRT) also indicated % GI of 13.83% and % VI of 65.97% against C. subtsugae CV017 at 160 μg·mL−1. Leaf AgNPs of D. villosa synthesized at room temperature (LRT), showed % GI of 29.07% and % VI of 56.53%, respectively, against C. violaceum ATCC 12472 at 320 μg·mL−1. The L80 and SRT at 160 μg·mL−1 and LRT at 320 μg·mL−1 may be considered as potential QS inhibitors following their activity against C. subtsugae CV017 and C. violaceum ATCC 12472, respectively. Therefore, D. villosa represents a potential source of antioxidants as well as an anti-quorum sensing therapeutic candidate for the control of Gram-negative bacterial infections.

Chitosan/carboxymethyl cellulose wound dressings supplemented with biologically synthesized silver nanoparticles from the ligninolytic fungus Anamorphous Bjerkandera sp. R1

Chitosan (CHI) and carboxymethyl cellulose (CMC) are naturally sourced materials with excellent physical, chemical, and biological properties, which make them a promising tool for the development of different medical devices. In this research, CHI-CMC wound dressings were manufactured, by using different colloidal suspensions of silver nanoparticles (AgNPs) synthesized from the ligninolytic fungus Anamorphous Bjerkandera sp. R1, called CS and SN. Transmission electron microscopy (TEM), UV-Vis spectroscopy, and dynamic light scattering (DLS) analysis were used to characterize AgNPs. The wound dressings were characterized, by scanning electron microscopy (SEM), optical microscopy and their mechanical, antimicrobial, and biological properties were evaluated. The results of the different characterizations revealed the formation of spherical AgNPs with a mean size between 10 and 70 nm for the different mixtures worked. The mechanical properties of CHI-CMS-AgNPs doped with CS and SN suspensions showed superior mechanical properties with respect to CHI-CMC wound dressings. Compared to the latter, CHI-CMC-AgNPs wound dressings yielded better antibacterial activity against the pathogen Escherichia coli. In biological assays, it was observed that manufactured CHI-CMC-AgNPs wound dressings were not toxic when in contact with human skin fibroblasts (Detroit). This study, then, suggests that this type of wound dressings with a chitosan matrix and carboxymethyl cellulose doped with biologically synthesized nanoparticles from the fungus Bjerkandera sp., may be an ideal alternative for the manufacture of new wound dressings.

Plant-mediated gold and silver nanoparticles as detectors of heavy metal contamination

Heavy metals are dumped into the environment as a result of human activities, posing a serious threat to ecology and human health. Surface water, potable drinking water, potable groundwater, and majority of wastewater include their traces, due to which, their detection by nanoparticles has received a lot of attention in recent years. Although microorganisms are utilised for green nanoparticle production, plant materials have recently been explored because they are more environmentally friendly, easier to scale up, and require fewer specific growth conditions. The production and attributes of nanoparticles synthesized by plant mediation could be enhanced through design of experiments approach, extending their feasibility in the detection of heavy metals in polluted environmental samples. A concise review on green synthesis of silver and gold nanoparticles utilizing plant phytochemicals, its mechanism of synthesis along with significance of design of experiments for enhancement, and their use as heavy metal contamination detectors is presented in the current study.

Non-Thermal Plasma Reduction of Ag+ Ions into Silver Nanoparticles in Open Atmosphere under Statistically Optimized Conditions for Biological and Photocatalytic Applications

An environmentally friendly non-thermal DC plasma reduction route was adopted to reduce Ag+ ions at the plasma−liquid interface into silver nanoparticles (AgNPs) under statistically optimized conditions for biological and photocatalytic applications. The efficiency and reactivity of AgNPs were improved by statistically optimizing the reaction parameters with a Box−Behnken Design (BBD). The size of the AgNPs was chosen as a statistical response parameter, while the concentration of the stabilizer, the concentration of the silver salt, and the plasma reaction time were chosen as independent factors. The optimized parameters for the plasma production of AgNPs were estimated using a response surface methodology and a significant model p < 0.05. The AgNPs, prepared under optimized conditions, were characterized and then tested for their antibacterial, antioxidant, and photocatalytic potentials. The optimal conditions for these three activities were 3 mM of stabilizing agent, 5 mM of AgNO3, and 30 min of reaction time. Having particles size of 19 to 37 nm under optimized conditions, the AgNPs revealed a 82.3% degradation of methyl orange dye under UV light irradiation. The antibacterial response of the optimized AgNPs against S. aureus and E. coli strains revealed inhabitation zones of 15 mm and 12 mm, respectively, which demonstrate an antioxidant activity of 81.2%.

Plant-Mediated Green Synthesis of Ag NPs and Their Possible Applications: A Critical Review

The potential applications of Ag NPs are exciting and beneficial in a variety of fields; however, there is less awareness of the new risks posed by inappropriate disposal of Ag NPs. The Ag NPs have medicinal, plasmonic, and catalytic properties. The Ag NPs can be prepared via physical, chemical, or biological routes, and the selection of any specific route depends largely on the end-use. The downside of a physical and chemical approach is that it requires a wide space, high temperature, high temperature for a longer time to preserve the thermal stability of synthesized Ag NPs, and the use of toxic chemicals. Although these methods produce nanoparticles with high purity and well-defined morphology, it is critical to develop cost-effective, energy-efficient, and facile route, such as green synthesis; it suggests the desirable use of renewable resources by avoiding the use of additional solvents and toxic reagents in order to achieve the ultimate goal. However, each method has its pros and cons. The synthesized Ag NPs obtained using the green approach have larger biocompatibility and are less toxic towards the biotic systems. However, identifying the phytoconstituents that are responsible for nanoparticle synthesis is difficult and has been reported as a suitable candidate for biological application. The concentration of the effective bioreducing phytoconstituents plays a crucial role in deciding the morphology of the nanoparticle. Besides these reaction times, temperature, pH, and concentration of silver salt are some of the key factors that determine the morphology. Hence, careful optimization in the methodology is required as different morphologies have different properties and usage. It is due to which the development of methods to prepare nanoparticles effectively using various plant extracts is gaining rapid momentum in recent days. To make sense of what involves in the bioreduction of silver salt and to isolate the secondary metabolites from plants are yet challenging. This review focuses on the contribution of plant-mediated Ag NPs in different applications and their toxicity in the aquatic system.

Facile green synthesis of non-genotoxic, non-hemolytic organometallic silver nanoparticles using extract of crushed, wasted, and spent Humulus lupulus (hops): Characterization, anti-bacterial, and anti-cancer studies

Since the last few decades, the green synthesis of metal nanoparticles was one of the most thrust areas due to its widespread application. The study proposed using wasted and unusable Humulus lupulus (Hops) extract to synthesize silver nanoparticles for biomedical application. The environment around us gives us many scopes to use the waste from environmental sources and turn it into something valuable. The spent Hops extract was used to synthesize silver nanoparticles (AgNP@HOPs), and the synthesized product exhibited an excellent therapeutic effect in terms of anti-bacterial and anti-cancer agents. The synthesis was optimized considering different factors like time and the concentration of AgNO₃. The silver nanoparticles were characterized in detail using different characterization techniques XRD, DLS, TEM, BET, XPS, Raman Spectroscopy, SEM, EDAX, AFM, which revealed the uniqueness of the silver nanoparticles. The average hydrodynamic size was found to be 92.42 ± 2.41 with a low polydispersity index. The presence of Ag-C and Ag-O bonds in the AgNP@HOPs indicated that it is composed of organo-silver and silver oxides. The nanoparticles were found to be spherical with an average size of 17.40 nm. The AgNPs were lethal to both E. coli and S. aureus with a MIC-50 of 201.881 μg/mL and 213.189 μg/mL, respectively. The AgNP@HOPs also exhibited an anti-cancer effect with an IC-50 of 147.175. The AgNP@HOPs exhibited less cytotoxicity and genotoxicity against normal cells and exhibited superior haemocompatibility (major criteria for drug selection). There are indeed various reports on the synthesis of silver nanoparticles, but this study proposes a green method for producing non-genotoxic, non-hemolytic organometallic silver nanoparticles using waste material with considerable therapeutic index from the environmental source with potential application in the medical industry. This work could be taken forward for in-vivo studies and for pre clinical studies.

Green synthesis, characterization of silver nanoparticals for biomedical application and environmental remediation

Production of silver nanoparticles (Ag-NPs) to increase photocatalytic activity of commercial TiO₂ (P25) and antibacterial activity of surgical sutures was studied. А new method of "green" synthesis of Ag-NPs from aqueous extract of grape skin (oxidation product), which is pre-processed by oxygen and ultrasound is reported. Also, a new method of electrochemical modification of surgical sutures was used. Characterization of Ag-NPs was carried out using energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM) and UV-visible spectroscopy. Zeta-potential of obtained colloidal solutions indicated the moderate stability of synthesized nanoparticles. The X-ray powder diffraction (XRD) analysis confirmed the crystallographic structure of the synthesized Ag-NPs. The component profile of grape skin extract has been analyzed using HPLC coupled to diode-array detection and tandem mass spectrometry (HPLC-DAD-MS/MS). In this study absorbable sutures were functionalized with biosynthesized AgNPs through an electrochemical and chemical deposition. Morphological analysis of Ag-NPs-coated surgical sutures was performed by SEM and Energy Dispersive X-Ray Spectroscopy (SEM-EDX) in order to evaluate the presence and distribution of silver deposited on the sutures. The sutures demonstrated bacteriostatic and antifungal effects on Gram-positive (Bacillus subtilis), Gram-negative (Escherichia coli) and Candida albicans wound pathogens. The study revealed that electrochemical deposition of Ag-NPs on nylon surgical sutures did not alter the mechanical properties of the sutures but conferred antibacterial properties. The modified TiO₂ powders with biosynthesized Ag-NPs were characterized by XRD pattern, SEM, their photocatalytic properties, and their antibacterial activities were studied. The results of the antibacterial activity studies showed that TiO₂ modified using green approach possessed higher antibacterial activity against Gram-negative bacteria in comparison with TiO₂ modified by the impregnation method.

Facet-dependent gold nanocrystals for effective photothermal killing of bacteria

Gold-based plasmonic nanocrystals have been extensively developed for noninvasive photothermal therapy. In this study, gold nanorods (AuNRs) with (200) plane and gold nanobipyramids (AuNBPs) with (111) plane were utilized as photothermal agents for noninvasive photothermal therapy. With longitudinal surface plasma bands at ~808 nm, both of AuNRs and AuNBPs revealed photothermal capability and reversibility of laser response under 808-nm near-infrared (NIR) laser irradiation. Moreover, AuNBPs with (111) plane exhibited higher photothermal performance than that of AuNRs with (200) plane under NIR laser irradiation. Density function theory (DFT) simulations revealed that water adsorption energy followed the order Au(111) < Au(100), indicating that the water was easily desorbed on the Au(111) surface for photothermal heating. For the photothermal therapy against Escherichia coli (E. coli), AuNBPs also exhibited higher efficiency compared to that of AuNRs under NIR laser irradiation. Combination of experimental photothermal therapy and DFT simulations demonstrated that AuNBPs with (111) plane were better photothermal agents than that of AuNRs with (100) plane.

Phyto-fabrication, purification, characterisation, optimisation, and biological competence of nano-silver

Published studies indicate that virtually any kind of botanical material can be exploited to make biocompatible, safe, and cost-effective silver nanoparticles. This hypothesis is supported by the fact that plants possess active bio-ingredients that function as powerful reducing and coating agents for Ag+. In this respect, a phytomediation method provides favourable monodisperse, crystalline, and spherical particles that can be easily purified by ultra-centrifugation. However, the characteristics of the particles depend on the reaction conditions. Optimal reaction conditions observed in different experiments were 70-95 °C and pH 5.5-8.0. Green silver nanoparticles (AgNPs) have remarkable physical, chemical, optical, and biological properties. Research findings revealed the versatility of silver particles, ranging from exploitation in topical antimicrobial ointments to in vivo prosthetic/organ implants. Advances in research on biogenic silver nanoparticles have led to the development of sophisticated optical and electronic materials with improved efficiency in a compact configuration. So far, eco-toxicity of these nanoparticles is a big challenge, and no reliable method to improve the toxicity has been reported. Therefore, there is a need for reliable models to evaluate the effect of these nanoparticles on living organisms.

Phytosynthesized nanoparticles as a potential cancer therapeutic agent

Plants are the well-known sources for the hyper-accumulation and reduction of metallic ions. Analysis of various plant extracts has justified the presence of different types of phytochemicals that possess the stabilization and reduction functionalities of precursors to form nanoparticles. Such characteristics make plants as an attractive source for synthesizing eco-friendly nanoparticles (NPs) with potentially less toxicity to the body. Recently, phytosynthesized nanoparticles have been explored for targeted inhibition and diagnosis of cancer cells without affecting non-cancerous healthy cells. The aim of this review is to discuss the characteristic performance of NPs synthesized from various plant sources for the diagnosis and inhibition of cancer. The mode of action of phytosynthesized nanoparticles for anti-cancer applications are also discussed.

Radiation-induced synthesis of tween 80 stabilized silver nanoparticles for antibacterial applications

Recently, Silver nanoparticles (AgNPs) have become widely applied nanomaterial in human contacting areas such as cosmetics, food and medicine due to their antibacterial property. On the other hand, surfactants are essential ingredient of several industrial and consumer formulations. Based on these important applications, the current research was aimed to carry out the synthesis and characterization of Tween 80 capped silver nanoparticles (T80-AgNPs) using gamma radiation reduction method. Characterization of T80-AgNPs was occurred by using UV-Vis, XRD, FTIR and TEM techniques. UV-Visible spectra showed surface plasmon resonance (SPR) peak in the range of 420 nm signifying the synthesis of colloidal AgNPs. TEM confirmed the formation of spherical and uniformly distributed AgNPs with average size of 18 nm. XRD analysis illustrated the formation of pure crystalline AgNPs. The FTIR analysis provides evidence for the stabilization of AgNPs by Tween 80. The synthesized T80-AgNPs were evaluated for antibacterial activity against both Escherichia coli (E. coli) as gram negative (G -ve) bacteria and Staphylococcus aureus (S. aureus) as gram positive (G + ve) bacteria and anti-biofilm activity to P. aeruginosa. The results show that T80-AgNPs exhibits excellent antibacterial and antibiofilm activities.

Gold nanomaterials as key suppliers in biological and chemical sensing, catalysis, and medicine

BACKGROUND

Gold nanoparticles (AuNPs) with unique physicochemical properties have received a great deal of interest in the field of biological, chemical and biomedical implementations. Despite the widespread use of AuNPs in chemical and biological sensing, catalysis, imaging and diagnosis, and more recently in therapy, no comprehensive summary has been provided to explain how AuNPs could aid in developing improved sensing and catalysts systems as well as medical settings.

SCOPE OF REVIEW

The chemistry of Au-based nanosystems was followed by reviewing different applications of Au nanomaterials in biological and chemical sensing, catalysis, imaging and diagnosis by a number of approaches, and finally synergistic combination therapy of different cancers. Afterwards, the clinical impacts of AuNPs, future application of AuNPs, and opportunities and challenges of AuNPs application were also discussed.

MAJOR CONCLUSIONS

AuNPs show exclusive colloidal stability and are considered as ideal candidates for colorimetric detection, catalysis, imaging, and photothermal transducers, because their physicochemical properties can be tuned by adjusting their structural dimensions achieved by the different manufacturing methods.

GENERAL SIGNIFICANCE

This review provides some details about using AuNPs in sensing and catalysis applications as well as promising theranostic nanoplatforms for cancer imaging and diagnosis, and sensitive, non-invasive, and synergistic methods for cancer treatment in an almost comprehensive manner.