Facile synthesis of Fe2O3 nanoparticles from Egyptian insecticide cans for efficient photocatalytic degradation of methylene blue and crystal violet dyes

Facile synthesis of highly basic, nanocrystalline Fe2O3-NiO composites as promising and durable catalysts for selective dehydrogenation of 2-butanol

Nanocrystalline Fe2O3-NiO composite catalysts were prepared using a sonication-assisted green preparation method. The prepared catalysts were characterized using different techniques, including thermal analyses (TGA/DTA), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, surface area measurements (SBET), and scanning electron microscopy (SEM). The surface basicity of the prepared catalysts was measured using the temperature-programmed desorption of CO2 (CO2-TPD) as a highly acidic probe molecule. The catalytic activity of all the prepared catalysts was tested at a temperature range of 250-325 °C towards the dehydrogenation of 2-butanol to methyl-ethyl ketone (MEK), which is considered a promising fossil fuel alternative and has several industrial applications. The composite catalysts showed better catalytic activity compared to the pure oxides (i.e., Fe2O3 and NiO) due to the strong synergetic effect between the two oxides. Fe2O3 prevented the coke formation over the surface of NiO by the oxygen-scavenging effect of Fe, which promotes the oxidation of the carbonaceous species and increases the catalyst's resistance to deactivation. The effect of weight hourly space velocity (WHSV) on the catalytic activity was tested over a selected catalyst. In addition, the stability and durability of the catalyst were tested across four successive reaction cycles, demonstrating remarkable performance throughout all the reaction cycles.

Significant photocatalytic decomposition of malachite green dye in aqueous solutions utilizing facilely synthesized barium titanate nanoparticles

The release of malachite green dye into water sources has detrimental effects on the liver, kidneys, and respiratory system. Additionally, this dye can impede photosynthesis and disrupt the growth and development of plants. As a result, in this study, barium titanate nanoparticles (BaTiO₃) were facilely synthesized using the Pechini sol-gel method at 600 °C (abbreviated as EA600) and 800 °C (abbreviated as EA800) for the efficient removal of malachite green dye from aqueous media. The Pechini sol-gel method plays a crucial role in the production of barium titanate nanoparticles due to its simplicity and ability to precisely control the crystallite size. The synthesized barium titanate nanoparticles were characterized by several instruments, such as X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy, and a diffuse reflectance spectrophotometer. The XRD analysis confirmed that the mean crystallite size of the EA600 and EA800 samples is 14.83 and 22.27 nm, respectively. Furthermore, the HR-TEM images confirmed that the EA600 and EA800 samples exhibit irregular and polyhedral structures, with mean diameters of 45.19 and 72.83 nm, respectively. Additionally, the synthesized barium titanate nanoparticles were utilized as catalysts for the effective photocatalytic decomposition of malachite green dye in aqueous media. About 99.27 and 93.94% of 100 mL of 25 mg/L malachite green dye solution were decomposed using 0.05 g of the EA600 and EA800 nanoparticles within 80 min, respectively. The effectiveness of synthesized BaTiO₃ nanoparticles as catalysts stems from their unique characteristics, including small crystallite sizes, a low rate of hole/electron recombination owing to ferroelectric properties, high chemical stability, and the ability to be regenerated and reused multiple times without any loss in efficiency.

Synthesis and characterization of visible-light-driven novel CuTa2O6 as a promising practical photocatalyst

In this work, the novel CuTa₂O₆ phase was successfully synthesized by the hydrothermal and followed by the calcination process. The X-ray diffraction pattern confirms the formation of different phases. At a low temperature, CuTa₂O₆ exhibits the orthorhombic phase, whereas, at a higher temperature, it underwent a phase transition to a cubic crystal structure. X-ray photoelectron spectroscopic results suggest the presence of all the elements (Cu, Ta, and O). The optical studies were carried out using a UV-Vis DRS spectrophotometer. FESEM images confirm the spherical-shaped particles for the sample annealed at a high temperature. The local atomic and electronic structures around Cu and the contribution of the Cu oxidation state in the CuTa₂O₆ system were determined by X-ray absorption spectroscopy. To investigate the effective usage of CuTa₂O₆ in treating wastewater, its photocatalytic activity was investigated by evaluating its use in the photodegradation of MO dye under visible light irradiation. Moreover, the prepared CuTa₂O₆ photocatalyst exhibits significant photocatalytic activity in the degradation of MO dye and shows excellent stability; it is therefore a promising material for potential use in a practical photocatalyst. The CuTa₂O₆ photocatalyst suggests an alternative avenue of research into effective photo-catalysts for solar hydrogen water splitting.

Application of chemometrics tools for removal of crystal violet and methylene blue in binary solution by eco-friendly magnetic adsorbent modified on Heracleum persicum waste

Synthetic dyes can be hazardous to the ecosystem, even at low concentrations in the effluent. In this research, the Heracleum persicum stems-Fe3O4 (MHPS) adsorbent performance for the removal of crystal violet (CV) and methylene blue (MB) from binary aqueous solutions was investigated in a batch method under the influence of different parameters. In addition, predictive models for the adsorption process were developed using machine learning techniques such as artificial neural networks and random forests. ANN and RF models achieved high R² values of 0.9501 and 0.9797 for CV, 0.9471, and 09,834 for MB, respectively, and obtained low MSE values of 0.07107 and 0.03405 for CV, 0.09933, and 0.02908 for MB. The proposed adsorbent is cheap and eco-friendly and, on the other hand, is easily collected by the magnetic field. The adsorbent was characterized by applying FESEM-EDX, FESEM, BET, and FTIR. Various isotherm and kinetics models for the simultaneous adsorption of CV and MB were investigated in aqueous solutions. The adsorption isotherm and kinetics studies explain that the extended Langmuir model and pseudo-second-order models are best suited for CV and MB in the binary solution. The exothermic adsorption was achieved in the temperature range of 5-45 °C.

Facile synthesis and characterization of Fe3O4/analcime nanocomposite for the efficient removal of Cu(II) and Cd(II) ions from aqueous media

In the water purification field, heavy metal pollution is a problem that causes severe risk aversion. This study aimed to examine the disposal of cadmium and copper ions from aqueous solutions by a novel Fe3O4/analcime nanocomposite. A field emission scanning electron microscope (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction were used to characterize the synthesized products. The FE-SEM images showed that the analcime and Fe3O4 samples consist of polyhedral and quasi-spherical shapes with average diameters of 923.28 and 28.57 nm, respectively. Besides, the Fe3O4/analcime nanocomposite consists of polyhedral and quasi-spherical shapes with average diameters of 1100.00 nm. The greatest uptake capability of the Fe3O4/analcime nanocomposite toward the copper and cadmium ions is 176.68 and 203.67 mg/g, respectively. The pseudo-second-order kinetic model and Langmuir equilibrium isotherm best describe the uptake of copper and cadmium ions using the Fe3O4/analcime nanocomposite. The uptake of copper and cadmium ions using the Fe3O4/analcime nanocomposite is exothermic and chemical in nature.

Designing Highly Active S-g-C3N4/Te@NiS Ternary Nanocomposites for Antimicrobial Performance, Degradation of Organic Pollutants, and Their Kinetic Study

The current research is about the synthesis of pure nickel sulfide, a series of Te (0, 0.5, 1, 1.5, 2, and 3 wt.%)-doped NiS (Te@NiS) nanoparticles (NPs), and a series of S-g-C3N4 (10, 30, 50, 70, and 80 wt.%)/Te@NiS nanocomposites (NCs), fabricated through a hydrothermal route. XRD and FTIR spectroscopic techniques demonstrated the successful synthesis of NPs and NCs. SEM-EDX images confirmed the flakelike structure and elemental constituents of the fabricated materials. Tauc plots were drawn, to calculate the band gaps of the synthesized samples. Te doping resulted in a significant reduction in the band gap of the NiS NPs. The photocatalytic efficiency of the NPs and NCs was investigated against MB, under sunlight. The results obtained for the photocatalytic activity, showed that 1%Te@NiS nanoparticles have an excellent dye degradation capacity in sunlight. This was made even better by making a series of SGCN/1% Te@NiS nanocomposites with different amounts of S-g-C3N4. When compared to NiS, Te@NiS, SGCN, and 70%SGCN/1%Te@NiS, the 70%SGCN/1%Te@NiS NCs have excellent antifungal ability. The higher impact of SGCN/Te@NiS, may be due to its enhanced ability to disperse and interact with the membranes and intracellular proteins of fungi. The 70%SGCN/1%Te@NiS NCs showed excellent antibacterial and photocatalytic efficiency. Thus, the 70%SGCN/1%Te@NiS NCs might prove fruitful in antibacterial and photocatalytic applications.

Scavenging of Organic Pollutant and Fuel Generation through Cost-Effective and Abundantly Accessible Rust: A Theoretical Support with DFT Simulations

Waste management and energy generation are the foremost concerns due to their direct relationship with biological species and the environment. Herein, we report the utilization of iron rust (inorganic pollutant) as a photocatalyst for the photodegradation of methylene blue (MB) dye (organic pollutant) under visible light (economic) and water oxidation (energy generation). Iron rust was collected from metallic pipes and calcined in the furnace at 700 °C for 3 h to remove the moisture/volatile content. The uncalcined and calcined rust NPs are characterized through scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier-transform infrared (FTIR) analysis, X-ray Diffraction (XRD), and thermogravimetric analysis (TGA). The morphological study illustrated that the shape of uncalcined and calcined iron rust is spongy, porous, and agglomerated. The XRD and DLS particle sizes are in a few hundred nanometers range. The photodegradation (PD) investigation shows that calcined rust NPs are potent for the PD of modeled MB, and the degradation efficiency was about 94% in a very short time of 11 min. The photoelectrochemical (PEC) measurements revealed that calcined rust NPs are more active than uncalcined rust under simulated 1 SUN illumination with the respective photocurrent densities of ~0.40 and ~0.32 mA/cm². The density functional theory simulations show the chemisorption of dye molecules over the catalyst surface, which evinces the high catalytic activity of the catalyst. These results demonstrate that cheaper and abundantly available rust can be useful for environmental and energy applications.

Facile Synthesis and Characterizations of Mixed Metal Oxide Nanoparticles for the Efficient Photocatalytic Degradation of Rhodamine B and Congo Red Dyes

Photocatalytic degradation has been suggested to be a cheap and efficient way to dispose of organic pollutants, such as dyes. Therefore, our research team strives to produce nanophotocatalysts in a simple and inexpensive way. In this work, the Pechini sol-gel technique was employed for the facile synthesis of Mn_0.5Zn_0.5Fe₂O₄/Fe₂O₃ and Fe_0.5Mn_0.5Co₂O₄/Fe₂O₃ as mixed metal oxide nanoparticles for the efficient photocatalytic degradation of Rhodamine B and Congo Red dyes. XRD, FT-IR, a N₂ adsorption/desorption analyzer, EDS, FE-SEM, and an UV-Vis diffuse reflectance spectrophotometer were used to characterize the produced samples. The XRD patterns revealed that the average crystallite size of the Fe_0.5Mn_0.5Co₂O₄/Fe₂O₃ and Mn_0.5Zn_0.5Fe₂O₄/Fe₂O₃ samples is 90.25 and 80.62 nm, respectively. The FE-SEM images revealed that the Fe_0.5Mn_0.5Co₂O₄/Fe₂O₃ sample consists of cubic and irregular shapes with an average diameter of 1.71 µm. Additionally, the Mn_0.5Zn_0.5Fe₂O₄/Fe₂O₃ sample consists of spherical shapes with an average diameter of 0.26 µm. The energy gaps of the Fe_0.5Mn_0.5Co₂O₄/Fe₂O₃ and Mn_0.5Zn_0.5Fe₂O₄/Fe₂O₃ samples are 3.50 and 4.3 eV and 3.52 and 4.20 eV, respectively. In the presence of hydrogen peroxide, the complete degradation of 100 mL of 20 mg/L of Rhodamine B and Congo Red dyes occurred at pH = 8 and 3, respectively, within 50 min, using 0.1 g of the synthesized samples.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

A critical evaluation of conventional kinetic and isotherm modeling for adsorptive removal of hexavalent chromium and methylene blue by natural rubber sludge-derived activated carbon and commercial activated carbon

The adsorptive removal of Cr(VI) and methylene blue (MB) was studied in a batch reactor using activated carbon (RAC), prepared from natural rubber waste, along with the commercial activated carbon (CAC). Maximum uptake of Cr(VI) and MB by the RAC was 21 and 30 mg g^-1, respectively, whereas the corresponding uptake by CAC was 145 and 224 mg g^-1. The kinetics of adsorption, however, was found to be faster in RAC than CAC. Both adsorbents were characterized by XRD, FT-IR, and FESEM-EDS. The predictability of various kinetic models, including the Weber-Morris model, was adversely affected by linearization. A multi-linear plot of adsorbed concentration versus square root of time failed to justify the multi-resistance hypothesis of mass transfer. Experimental kinetic data matched well with four surface reactions and an intraparticle diffusion model but showed substantial deviation from the numerical solution of another Fickian model incorporating mass balance and Langmuir isotherm.

Efficient degradation of organic pollutants by novel titanium dioxide coupled bismuth oxide nanocomposite: Green synthesis, kinetics and photoactivity

Herein, a green and facile methodology was used for the structural design of semiconductor nanomaterials and employed as efficient photocatalyst to resolve the environmental issues of water pollutants. Titanium oxide coupled with bismuth oxide (TiO₂@Bi₂O₃) nanocomposite was synthesized by employing the seed extract of Sapindus mukorossi (commonly found plant in India) and subsequently used for the elimination of toxic, and persistence industrial pollutants namely bisphenol A (BPA) and methylene blue (MB). Microscopic and spectroscopic techniques revealed particle size of synthesized nanocomposite found less than 50 nm along with high crystallinity. Appearance of stretching vibrations at 459 cm^-1 for Bi-O-Ti in the IR spectra of nanocomposite has established the coupling of TiO₂ with Bi₂O₃. The parameters of degradation were optimized by varying the pollutant concentration, catalytic amount and pH in the presence of natural sunlight. The nanocomposite TiO₂@Bi₂O₃ showed maximum degradation (MB: 94% and BPA: 91%) at a minimum concentration of pollutant (50 mgL^-1) with catalyst amount (35 mg), neutral pH and reduces half-life of pollutants (BPA: 1h, MB: 0.5h). Owing of higher surface area (80 m²g^-1), lower band gap (2.5 eV), and more negative zeta potential value (-40.3 mV) results into excellent photocatalytic properties. The breakage of S-N conjugated system in MB results into rapid degradation as compare to BPA. The degradation followed first-order kinetics and Langmuir adsorption in both the cases. Presence of active radicals during the photocatalysis process was responsible for quick degradation and strongly supported by scavenger analysis. GC-MS analysis revealed the degradation of toxic pollutants into safer metabolites and finally mineralized. Multiple times (n = 8) reusability of green photocatalyst advocated sustainability and appropriate for industrial applications.

Novel Sodium Alginate/Polyvinylpyrrolidone/TiO2 Nanocomposite for Efficient Removal of Cationic Dye from Aqueous Solution

The combination of adsorption and photodegradation processes is an effective technique for the removal of dye contaminants from water, which is motivating the development of novel adsorbent-photocatalyst materials for wastewater treatment. Herein, novel nanocomposite porous beads were developed using titanium dioxide (TiO2) nanotubes embedded in a sodium alginate (SA)/polyvinylpyrrolidone (PVP) matrix using calcium chloride solution as a crosslinker. The prepared nanocomposite beads’ performance was examined as an adsorbent-photocatalyst for the breakdown of methylene blue in aqueous solutions. Several operation factors influencing the dye decomposition process, including photocatalyst dosage, illumination time, light intensity, and stability were investigated. The findings demonstrated that the removal activity of the beads changed with the TiO2 weight ratio in the composite. It was found that SA/PVP/TiO2-3 nanocomposite beads presented the greatest deterioration efficiency for methylene blue dye (98.9%). The cycling ability and reusability of the prepared SA/PVP/TiO2 nanocomposite beads recommend their use as efficient, eco-friendly materials for the treatment of wastewaters contaminated with cationic dyes.

Discoloration of methylene blue at neutral pH by heterogeneous photo-Fenton-like reactions using crystalline and amorphous iron oxides

Different iron oxides were evaluated for the discoloration of methylene blue (MB) at neutral pH by heterogeneous photo-Fenton-like reactions with a UV-LED lamp. Fe3O4, α-Fe2O3, and a-FeOOH catalysts were synthesized and characterized by X-ray diffraction, scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared spectroscopy, and adsorption isotherms of N2. The results show high crystallinity and relatively low surface areas for Fe3O4 and α-Fe2O3, and amorphous structure with high surface area for the case of a-FeOOH. The discoloration of MB by iron oxides as catalysts was studied using UV-Vis spectroscopy. Despite the relative high adsorption of MB for magnetite (12%) compared to the other oxides, it shows a slow discoloration kinetics. Besides, amorphous oxide (named a-FeOOH) shows a higher discoloration kinetics with negligible adsorption capacity. The pseudo first-order kinetic constant values for Fe3O4, α-Fe2O3, and a-FeOOH are 5.31 × 10−3, 6.89 × 10−3, and 13.01 × 10−3 min−1; and the discoloration efficiencies at 120 min were 56, 60, and 82%, respectively. It was testified that low crystallinity iron oxide can be used in the efficient discoloration of MB by photo-Fenton process with a hand UV-A lamp.

Recent advancements of spinel ferrite based binary nanocomposite photocatalysts in wastewater treatment

A lot of studies on spinel ferrites (MFe₂O₄, M = divalent metal ion) and their binary nanocomposites as photocatalysts in the decontamination of wastewater have been performed, because MFe₂O₄ nanoparticles are relatively stable, biocompatible and low-cost efficient photocatalyst. The separation of MFe₂O₄ photocatalyst is easy owing to its excellent magnetic behavior. With this background, the recent developments on photocatalytic performances of MFe₂O₄ based binary nanocomposites were comprehensively reviewed. Especially, a focus on MFe₂O₄/metal oxides, MFe₂O₄/carbon based materials, MFe₂O₄/polymers, MFe₂O₄/metal nanoparticles and MFe₂O₄/other compounds for the photocatalytic degradation of dyes, emerging contaminants and inorganic pollutants has been thoroughly given. The advantages of MFe₂O₄ based nanocomposites as photocatalysts were also discussed. In addition, the possible pathway of active free radical generation by these photocatalysts under visible and ultraviolet irradiation has been explained. A comparison of photocatalytic activities of MFe₂O₄ based binary nanocomposites with recent reports has been carried out. This review concludes that MFe₂O₄ based binary nanocomposites have potential capacity in water purification technology. Nevertheless, their practical utilization in water treatment plants still needs to be further studied.

Utilization of rice husk and waste aluminum cans for the synthesis of some nanosized zeolite, zeolite/zeolite, and geopolymer/zeolite products for the efficient removal of Co(II), Cu(II), and Zn(II) ions from aqueous media

In this paper, rice husk and waste aluminum cans were exploited as silicon and aluminum sources, respectively for the low-cost synthesis of some nanosized zeolite, zeolite/zeolite, and geopolymer/zeolite products. XRD confirmed that the synthesized geopolymer/zeolite products are geopolymer/zeolite A (has a crystallite size of 58.44 nm & abbreviated as G1) and geopolymer/faujasite (has a crystallite size of 25.58 and 20.26 nm & abbreviated as G2 and G3, respectively). Also, the synthesized zeolite products are sodium aluminum silicate hydrate (has a crystallite size of 27.65 and 41.85 nm & abbreviated as H1 and H2, respectively). Besides, the synthesized zeolite/zeolite product is sodium aluminum silicate hydrate/zeolite A (has a crystallite size of 66.01 nm and abbreviated as H3). Moreover, the synthesized products were characterized using other tools such as HR-TEM, FE-SEM, EDX, and FT-IR. The synthesized products were efficiently applied for removing Co(II), Cu(II), and Zn(II) ions from aqueous media and wastewater which was taken from Abuzaabal- Qalyubiyah-Egypt. The maximum uptake capacity of G3 sample toward Co(II), Cu(II), and Zn(II) ions is 134.24 ± 1.26, 126.26 ± 0.32, and 131.93 ± 0.87 mg/g, respectively. The uptake of the studied metal ions is spontaneous, chemical, exothermic, and fitted well with the Langmuir isotherm and pseudo-2nd-order kinetic model.

Sucrose-Triggered, Self-Sustained Combustive Synthesis of Magnetic Nickel Oxide Nanoparticles and Efficient Removal of Malachite Green from Water

Dye-containing industrial effluents create major concern nowadays. To address the problem, magnetic nickel oxide nanoparticles (NONPs) were synthesized using the autopropagator combustion technique assisted by sucrose as fuel and used for the removal of toxic malachite green (MG) from water. The material was characterized by scanning electron microscopy (SEM-EDS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), vibrating sample magnetism (VSM), point of zero charge (pH_ZPC), and Brunauer-Emmet-Teller surface area analysis. SEM images show flowerlike texture with the presence of multiple pores. VSM reveals a well-defined hysteresis at room temperature, confirming a permanent magnetic nature of the material. pH_ZPC was found to be 6.63, which enables dye separation in the drinking water pH range. MG removal from water was carried out in the batch mode with optimized physicochemical parameters such as contact time, pH, temperature, and dose. Langmuir adsorption capacity was estimated to be 87.72 mg/g. Pseudo-second order kinetics (R ² = 0.999) and Langmuir isotherm model (R ² = 0.997) were found to best fit. The magnetic nature facilitates fast and quantitative separation of NONPs from solution using a hand-held magnet. Dye-loaded NONPs can be easily regenerated up to 89% and reused up to five cycles without significant loss of activity. The mechanism of adsorption is proposed to be a combination of electrostatic attraction and weak hydrogen bonding. Strategically designed straightforward synthetic protocol, low cost, high uptake capacity, and sustainable use render NONPs an ideal alternative for future dye treatment.

Effects of heteroaggregation with metal oxides and clays on tetracycline adsorption by graphene oxide

Multiple nanoparticles (NPs) often coexist in water with contaminants, which inevitably affect the fate and transport of coexisted contaminants and other types of nanoparticles in actual water. This research was devoted to examine the adsorption of tetracycline (TC) on graphene oxide (GO) in the presence of different amounts of model engineered and natural NPs (m-NPs), including metal oxides (ZnO and Fe₂O₃), clays (kaolin and montmorillonite). The experimental results proved that the existence of m-NPs greatly enhanced the TC adsorption onto GO except for that at Fe₂O₃/GO = 10:1 and lengthened the adsorption equilibrium time. The enhanced adsorption amount of TC with increasing m-NPs/GO ratio was primarily due to the adsorption of TC onto m-NPs. In contrast, the slightly inhibitory effects by 10:1 Fe₂O₃/GO could be attributed to the blockage effect on GO surface by a small amount of Fe₂O₃. Compared with five m-NPs/adsorbents, m-NPs/GO had the greatest promoting efficiency on TC removal. Moreover, the heteroaggregation of GO with different m-NPs was studied in aqueous phase by microscopic, spectroscopic, and computational methods. Analysis showed that the electrostatic attraction between negatively charged GO and positively charged ZnO were likely to first heteroaggregate in binary systems of GO and ZnO, while GO were prone to homoaggregate owing to electrostatic repulsion with the same negatively charged montmorillonite (or kaolin). Besides, Fe₂O₃ tended to first homoaggregate and then heteroaggregate with GO. In summary, this report elucidated complex interactions between GO and m-NPs, which was crucial to fundamentally understand towards a predictive framework for describing the fate and migration of GO and m-NPs in actual water.

Elnouby M, Gouda MH, Elessawy NA, Santos DMF. Effect of the Morphology of Tungsten Oxide Embedded in Sodium Alginate/Polyvinylpyrrolidone Composite Beads on the Photocatalytic Degradation of Methylene Blue Dye Solution

Tungsten oxide nanostructures were modified by oxygen vacancies through hydrothermal treatment. Both the crystalline structure and morphological appearance were completely changed. Spherical WO₃·H₂O was prepared from tungstic acid solution by aging at room temperature, while rod-like WO₃·0.33H₂O was prepared by hydrothermal treatment of tungstic acid solution at 120 °C. These structures embedded in sodium alginate (SA)/polyvinylpyrrolidone (PVP) were synthesized as novel porous beads by gelation method into calcium chloride solution. The performance of the prepared materials as photocatalysts is examined for methylene blue (MB) degradation in aqueous solutions. Different operation parameters affecting the dye degradation process, such as light intensity, illumination time, and photocatalyst dosage are investigated. Results revealed that the photocatalytic activity of novel nanocomposite changed with the change in WO₃ morphology. Namely, the beads with rod nanostructure of WO₃ have shown better effectiveness in MB removal than the beads containing WO₃ in spherical form. The maximum degradation efficiency was found to be 98% for WO₃ nanorods structure embedded beads, while the maximum removal of WO₃ nanospheres structure embedded beads was 91%. The cycling-ability and reuse results recommend both prepared structures to be used as effective tools for treating MB dye-contaminated wastewaters. The results show that the novel SA/PVP/WO₃ nanocomposite beads are eco-friendly nanocomposite materials that can be applied as photocatalysts for the degradation of cationic dyes in contaminated water.

Efficient photocatalytic degradation of malachite green dye using facilely synthesized hematite nanoparticles from Egyptian insecticide cans

In the present study, a combustion method was applied for the production of hematite nanoparticles from Egyptian iron waste using l-arginine (The sample was named HA) and glutamine (The sample was named HG) as organic fuels, respectively. XRD confirmed that the HA and HG products have crystallite sizes of 48 and 56 nm, respectively. Also, HR-TEM demonstrated that spherical and irregular shapes have an average diameter of 45 and 59  nm were observed in the HA and HG samples, respectively. Besides, FE-SEM elucidated that spherical and irregular shapes have an average size of 142 and 196 nm were observed in the HA and HG samples, respectively. In addition, FT-IR confirmed that the peaks which were detected at 518 and 430 cm^-1 are because of vibrations of Fe-O bond. Moreover, the value of the energy gap for the HA and HG samples was 1.00 and 1.45 eV, respectively. Furthermore, the PL emission spectra elucidated that the emission intensity of the HA sample was less than that of the HG sample. So, e^-/h⁺ recombination rate of the HA sample was less than that of the HG sample. Hence, the photocatalytic degradation of malachite green dye using the HA sample was larger than that using the HG sample. In the absence of H₂O₂, the % degradation of malachite green dye under the influence of UV using HA and HG samples was 46.29 and 39.72 % after 3 h, respectively. Also, in the presence of H₂O₂, the % degradation of malachite green dye under the influence of UV using HA and HG samples was 100 % after 60 and 70 min, respectively.

Oxidative Degradation of Methylene Blue via PDS-Based Advanced Oxidation Process Using Natural Pyrite

H₂O₂- and PDS-based reactions are two typical advanced oxidation processes (AOPs). In this paper, a comparative study of H₂O₂/PDS-based AOPs employing natural pyrite as a catalyst to degrade methylene blue (MB) was reported. The adaptive pH range in pyrite/PDS extended from 3 to 11, in contrast to the narrow effective pH range of 3–7 in pyrite/H₂O₂. As a result of the iron leaching, a synergistic effect of both homogeneous and heterogeneous catalysis was observed in pyrite/PDS, whereas heterogeneous catalytic oxidation dominated pyrite/H₂O₂. Furthermore, the batch results showed that the MB removal by pyrite/PDS was highly dependent on chemical conditions (e.g., pH, pyrite and PDS concentration, temperature). Powerful SO₄^•− was generated by pyrite rapidly under acidic or weakly acidic conditions, while SO₄^•− and PDS were assumed by OH⁻ under alkaline condition. The lower pyrite loading (from 0.1 to 0.5 g/L) was affected the removal efficiency obviously, while the scavenging of SO₄^•− did not seem to be remarkable with the excessive amounts of pyrite (>0.5 g/L). Excessive amounts of PDS (>2 mmol/L) might negatively affect the pyrite/PDS system. The reaction temperature that increased from 20 to 40 °C had a positive effect on the degradation of MB. SEM and XRD showed that the passivation of catalyst did not occur due to the strong acid-production ability of pyrite/PDS, inhibiting the formation of Fe-oxide covering the pyrite surface.

Preparation and regeneration of iron-modified nanofibres for low-concentration phosphorus-containing wastewater treatment

In this study, nanocellulose (CNFs) was prepared by a mechanical shearing method, a simple and pollution-free process. Iron hydroxide was loaded on nanocellulose, a natural macromolecule derived from bamboo, to produce the second-generation iron-loaded nanocellulose for the removal of low-concentration phosphorus from wastewater. We found that the best modified ferric salt was ferric chloride. When the mass ratio of Fe(OH)3 and CNFs was 1.5 : 1, freeze-drying with liquid nitrogen yielded the best adsorption performance. The adsorption process of Fe(OH)3@CNFs followed the pseudo-second-order kinetics and belonged to chemical adsorption. Regeneration experiments showed that after 10 cycles of adsorption-regenerations of the adsorbent, the phosphorus adsorption efficiency was still stable at 80% of the initial material. The prepared adsorbent was characterized by the BET surface area measurement, scanning electron microscopy and FT-IR. The surface morphology, pore size and elements of materials before and after iron loading were analysed. Compared with other adsorbents, the phosphorus removal performances of the second-generation iron-loaded nanocellulose were superior. Compared with the first-generation material, the second-generation adsorbent is simpler and more environmentally friendly.