Developed a novel sensor based on fluorescent graft conjugated polymer for the determination of aristolochic acid in traditional Chinese medicine

Rapid and reliable ratiometric fluorescence detection of isoquercitrin based on a high-nuclearity Zn(II)-Nd(III) nanomolecular sensor

Rapid and quantitative detection of isoquercitrin (Isq) has been attracting much attention due to its outstanding pharmacological and physiological activities. Herein, an interesting 48-metal Zn(II)-Nd(III) nanocluster (1, molecular sizes 1.3 × 2.8 × 3.1 nm) with salen-type Schiff base ligand was constructed as molecular sensor for the luminescence detection of Isq. 1 exhibits visible ligand-centered emission and NIR luminescence of Nd(III), and shows ratiometric fluorescence response to Isq with high sensitivity even in the presence of other interferences. The fluorescence sensing behavior can be expressed by a second-order equation I1060nm/I480nm = A*[Isq]2 + B*[Isq] + C, which is used to quantitatively analyze the Isq concentrations in DMF and FCS. The LODs to Isq for the ligand-centered and lanthanide emissions of 1 in DMF are 0.21 μM and 0.11 nM, respectively. The quenching of the ligand-centered emission of 1 caused by Isq is attributed to the competitive absorption of light energy and "inner effect", while, the luminescence enhancement is due to the "antenna effect".

Ratiometric luminescent simultaneous sensing of aristolochic acids (I-IV) by a novel metal-organic framework and its nanowire

Aristolochic acids (AAs), which are a group of nitrophenanthrene carboxylic acids formed by Aristolochia plant, have become an increasing serious threat to humans due to their nephrotoxicity and carcinogenicity. Fast and accurate approaches capable of simultaneous sensing of aristolochic acids (I-IV) are vital to avoid intake of such compounds. In this research, the novel ratiometric fluorescence zinc metal-organic framework and its nanowire have been prepared. The two different coordination modes (tetrahedral configuration and twisted triangular bipyramidal configuration) within zinc metal-organic framework lead to the significant double emissions. The ratiometric fluorescence approach based on nanowire provides a broader concentration range (3.00 × 10-7~1.00 × 10-4 M) and lower limit of detection (3.70 × 10-8 M) than that based on zinc metal-organic framework (1.00 × 10-6~1.00 × 10-4 M, 5.91 × 10-7 M). The RSDs of the results are in the range 1.4-3.5% (nanowire). The density functional theory calculations and UV-Vis absorption verify that the sensing mechanism is due to charge transfer and energy transfer. Excellent spiked recoveries for AAs(I-IV) in soil and water support that nanowire is competent to simultaneously detect these targets in real samples, and the proposed approach has potential as a fluorescence sensing platform for the simultaneous detection of AAs (I-IV) in complex systems.

Detection and Removal of Aristolochic Acid in Natural Plants, Pharmaceuticals, and Environmental and Biological Samples: A Review

Aristolochic acids (AAs) are a toxic substance present in certain natural plants. Direct human exposure to these plants containing AAs leads to a severe and irreversible condition known as aristolochic acid nephropathy (AAN). Additionally, AAs accumulation in the food chain through environmental mediators can trigger Balkan endemic nephropathy (BEN), an environmental variant of AAN. This paper presents a concise overview of the oncogenic pathways associated with AAs and explores the various routes of environmental exposure to AAs. The detection and removal of AAs in natural plants, drugs, and environmental and biological samples were classified and summarized, and the advantages and disadvantages of the various methods were analyzed. It is hoped that this review can provide effective insights into the detection and removal of AAs in the future.

Construction of a Near-IR-Luminescent Rectangular Yb(III) Complex from a Dodecadentate Schiff Base Ligand for the Excitation-Wavelength-Dependent Detection of Aloe Emodin (a Natural Medicinal Ingredient)

A near-IR-luminescent octanuclear Yb(III) complex 1 was constructed from a new dodecadentate Schiff base ligand, which is used in the rapid and reliable wavelength-dependent detection of aloe emodin (AE) with high sensitivity even in the presence of other interferences.

Preparation of multicolor luminescence Schiff-base compound based on solvent control and its application in the detection of pentachloronitrobenzene

Fluorescent materials with tunable optical properties are critical to their potential application. So far, the tuning of double-color luminescence has been easily achieved for many organic materials, but there are very few reports on multicolor luminescence materials. In this work, a multicolor emissions Schiff-base fluorescent compound 1,1'-{4,4'-Biphenyldiylbis[nitrilo(E)methylylidene]}di(2-naphthol) (BPDN) with an aggregation induced emission (AIE) characteristic was synthesized, and its luminescent characteristic was investigated. The BPDN molecules with low concentration in solution can emit faint light, but a new AIE phenomenon will appear when the BPDN molecules are aggregated in the solvent with low solubility or high concentration. The color and efficiency of the AIE of BPDN can be tuned by changing its aggregation state: the luminescence of the aggregate gradually redshifts (blue, green, to orange) as the solvent with poor solubility in the mixture increases or increasing the concentration of the BPDN. Based on the multicolor luminescence BPDN, a molecularly imprinted ratiometric fluorescent probe test strip (MIRF test strip) had been prepared and successfully applied to visual detection of pentachloronitrobenzene (PCNB). The color of test strip could change gradually from orange to yellow to green with the increase of the concentration of PCNB. This work shows the characteristic and application of multicolor luminescence BPDN.

Lanthanide Metal-Organic Framework-Based Fluorescent Sensor Arrays to Discriminate and Quantify Ingredients of Natural Medicine

The discrimination and quantification of the ingredients from natural medicines are a challenging issue due to their complicated and various structures. Metal-organic frameworks (MOFs) have shown great promise in sensing applications. Here, we report a fluorescent sensor array for rapid identification of some natural compounds using a sensor array composed of four kinds of lanthanide (Eu³⁺ and Tb³⁺) fluorescent MOFs (Ln-MOFs), which have diversified fluorescent responses to 26 active/toxic compounds including 12 saponins, 7 flavonoids, 3 stilbenes, and 4 anthraquinones. The fluorescence of the Ln-MOFs after reaction with the compounds was summarized as datasets and processed by principle component analysis (PCA) and hierarchical cluster analysis (HCA) methods. The corresponding responses of the 4 types of compounds are well separated on 2D/3D PCA score plots and HCA dendrograms. We have also tested typical blind samples by concentration-dependent PCA, and an accuracy of 100% was obtained. In addition, the response mechanisms of the Ln-MOFs to the compounds were also studied. Compared with traditional methods using liquid chromatography-mass spectrometry, the developed fluorescent sensor array provides a more efficient and economic strategy to discriminate various active/toxic ingredients in natural medicine.

Metal-organic framework grafted with melamine for the selective recognition and miniaturized solid phase extraction of aristolochic acid Ⅰ from traditional Chinese medicine

Aristolochic acid Ⅰ is a nephrotoxic compound and exist in some traditional Chinese medicines at trace level. Up to now, specific enrichment of aristolochic acid Ⅰ remains important procedure and key problem in its analysis. In this study, melamine was proposed as the recognition unit and grafted on the surface of metal-organic framework to fabricate a specific material for aristolochic acid Ⅰ. This material was prepared by using a two-step strategy and the preparation process was optimized. The physical and chemical properties were investigated using scanning electron microscopy, Fourier-transfer infrared spectroscopy, X-ray diffraction and nitrogen adsorption-desorption techniques. Adsorption properties were evaluated by binding experiments. The melamine modified material exhibited a uniform morphology, high specific surface area (460.20 m² g^-1), high adsorption capacity (25.57 mg g^-1), fast mass transfer rate and excellent selectivity. Further, a specific and sensitive method was established by using this material as adsorbent of mini-solid phase extraction. The limit of detection was as low as 0.02 μg mL^-1. Therefore, melamine modified metal-organic framework is an ideal adsorbent for the recognition and enrichment of aristolochic acid Ⅰ.

Molecularly imprinted ratiometric fluorescent probe for visual and fluorescent determination of aristolochic acid I based on a Schiff-base fluorescent compound

A molecularly imprinted ratiometric fluorescent probe (MIRF probe) was synthesized for the determination of aristolochic acid I (AAI) based on the Schiff-base fluorescent compound N,N'-bis(o-carboxybenzylidene)-p-4,4'-diaminobiphenyl (BDDB). The BDDB was immobilized in the silica nanoparticle (BDDB@SiO₂) as an internal standard material. The blue-emitting BDDB@SiO₂ and the yellow-emitting carbon quantum dots (y-CDs) were wrapped in the molecularly imprinted polymer (MIP) to provide a reliable reference signal at 440 nm and a fluorescent response signal at 530 nm at the excitation wavelength of 365 nm, respectively. In the preparation of the MIP of the MIRF probe, 4-vinylbenzoic acid as the functional monomer and AAI as the template molecule were used. An imprinting factor of 2.25 was obtained. Under the optimum conditions, the fluorescent response signal at 530 nm was quenched gradually by AAI in the range 1.0 to 120.0 μmol/L, while the reference signal at 440 nm remained unchanged. The limit of detection was 0.45 μmol/L, and the fluorescent color of the MIRF probe changed gradually from yellow to green to blue, which illustrated that the developed probe had a specific AAI recognition ability, a good anti-interference ability, and a sensitively visual determination ability. The probe was successfully applied to the AAI determination in traditional Chinese medicine (TCM) Asarum. The results showed that it had satisfactory recoveries (95.5-107.3%) and low relative standard deviations (2.0%). Furthermore, this method has a potential for the onsite naked eye determination of AAI in TCM samples.Graphical abstract.

Double Role of Diphenylpyridine Derivatives as Fluorescent Sensors for Monitoring Photopolymerization and the Determination of the Efficiencies of the Generation of Superacids by Cationic Photoinitiators

Novel fluorescent sensors with electron-donating or electron-withdrawing substituents incorporated into a chromophore group based on 2,6-diphenylpyridine were designed and synthesised. The spectroscopic properties of these compounds were studied. Moreover, the positive solvatochromism of 2,6-bis-(4-methylsulphanylphenyl)pyridine (PT-SCH₃) in selected solvents was studied by measurement of the absorption and emission spectra and analysed using the Dimroth-Reichardt solvent parameter set. After that, the performance of a series of 2,6-diphenylpyridine derivatives as fluorescent molecular sensors for monitoring free-radical and cationic photopolymerization processes by the Fluorescence Probe Technique (FPT) was studied. As a consequence of this stage of research, the effect of substituents on the sensitivity of the 2,6-diphenylpyridine derivatives as sensors during photopolymerization has been evaluated and discussed. It has been found that compounds containing strong electron-donating substituent (PT-SCH₃) slightly shift their fluorescence spectrum during the free-radical polymerization of monomer, which enables the monitoring of the polymerization progress using the fluorescence intensity ratio measured at two different wavelengths as the progress indicator. The position of the fluorescence spectrum of 2,6-diphenylpyridine derivatives with electron-withdrawing substituents is practically insensitive to changes occurring in their environment. Hence, it is recommended to use these compounds with different indicators of the progress of the photopolymerization process based on normalised intensity of fluorescence (I_max/I₀). Among the compounds studied, 2,6-bis(4-methylsulphanylphenyl)pyridine (PT-SCH₃) turned out to be the best fluorescent sensor for the purpose of monitoring free-radical polymerization by FPT. Consequently, the dual application of the selected 2,6-diphenylpyridine derivatives is proposed: (a) as fluorescent sensors for monitoring the free-radical photopolymerization progress, and (b) as spectroscopic sensors for the determination of efficiencies of the generation of superacids by cationic photoinitiators during the cationic photopolymerization process. Finally, a new method for determining the relative efficiency of the photogeneration of superacids during the photo cleavage of onium salt has been devised and applied for the evaluation of the performance of 2,6-diphenylpyridine derivatives.

Water-soluble conjugated polymeric micelles as a carrier for studying Pt(iv) release and imaging in living cells

Here, polyethylene glycol (PEG) was fixed on the side chains of a poly(p-phenyleneethynylene) (PPE) core via an esterification reaction, thus forming hydrophilic conjugated polymeric micelles (CPMs).