A novel cholesterol conjugated fluorescence probe for Cu2+ detection and bioimaging in living cells

A near-infrared fluorescent probe with thiadiazole unit as key skeleton for ICT and ESIPT mechanism and effective detection of Cu2

Fluorescent probe L-I was synthesized to demonstrate that 1,3,4-thiadiazole is an attractive moiety and could be utilized as positive hydrogen bond acceptor for excited state intramolecular proton transfer (ESIPT) processes, guider of electrons movement for intramolecular charge transfer (ICT) process and identify group for mental ions. Furthermore, dicyanoisophorone framework was employed to improve the fluorescence characteristics and near-infrared (NIR) fluorescent emission at 695 nm accompanied by a Stoke's shift as large as 260 nm was obtained. L-I could selectively detect Cu2+ over other analytes taking advantages of high sensitivity, fast response within 30 s and low detection limit (0.026 μM). More important, L-I exhibited good performance for detection of Cu2+ in actual water samples, food products, traditional Chinese medicine and for cell imaging which demonstrates practical significance in the fields of environmental monitor, food safety and biotechnology.

Recent advances of lanthanide nanomaterials in Tumor NIR fluorescence detection and treatment

Lanthanide nanomaterials have garnered significant attention from researchers among the main near-infrared (NIR) fluorescent nanomaterials due to their excellent chemical and fluorescence stability, narrow emission band, adjustable luminescence color, and long lifetime. In recent years, with the preparation, functional modification, and fluorescence improvement of lanthanide materials, great progress has been made in their application in the biomedical field. This review focuses on the latest progress of lanthanide nanomaterials in tumor diagnosis and treatment, as well as the interaction mechanism between fluorescence and biological tissues. We introduce a set of efficient strategies for improving the fluorescence properties of lanthanide nanomaterials and discuss some representative in-depth research work in detail, showcasing their superiority in early detection of ultra-small tumors, phototherapy, and real-time guidance for surgical resection. However, lanthanide nanomaterials have only realized a portion of their potential in tumor applications so far. Therefore, we discuss promising methods for further improving the performance of lanthanide nanomaterials and their future development directions.

A novel lipid droplets/lysosomes-targeting colorimetric and ratiometric fluorescent probe for Cu2+ and its application

A novel multifunctional fluorescent probe LL2 was prepared via a one-step condensation reaction between 3-formyl-N-butylcarbazole and 2-Hydroxy-1-naphthylhydrazone. LL2 can work as a colorimetric probe for Cu²⁺, and can also selectively recognize Cu²⁺ via ratiometric fluorescence signal. After the addition of Cu²⁺, the probe LL2 responded rapidly within 5 s and reached stability within 30 s. In natural light, when Cu²⁺ were added to the solution, the color of probe LL2 changed from yellowish to colorless, while there was a discernible fluorescence changed from green to blue under a 365 nm UV lamp. The ratiometric fluorescence intensity (F₄₄₉/F₅₁₀) showed a good linear relationship (R² = 0.9902) with Cu²⁺ concentration in the concentration range of 0-5 μmol/L, and the minimum detection limit was 1.96 μM. Cell imaging experiments showed that LL2 could capture fluorescence signals in the green and blue channels of HepG2 cells through fluorescence confocal microscope, and successfully recognize exogenous Cu²⁺ in HepG2 cells. In addition, fluorescence co-localization experiments showed that LL2 could target both lipid droplets and lysosomes. Meanwhile, LL2 could be applied to filter paper strip assay and detection of Cu²⁺ in actual water samples. These results indicated that probe LL2 has a good capability for monitoring Cu²⁺ in environment and living cells.

Development of a Fluorescein-Based Probe with an "Off-On" Mechanism for Selective Detection of Copper (II) Ions and Its Application in Imaging of Living Cells

Copper is a common metallic element that plays an extremely essential role in the physiological activities of living organisms. The slightest change in copper levels in the human body can trigger various diseases. Therefore, it is important to accurately and efficiently monitor copper ion levels in the human body. Recent studies have shown that fluorescent probes have obvious advantages in bioimaging and Cu²⁺ detection. Therefore, a novel Cu²⁺ probe (N2) was designed and synthesized from fluorescein, hydrazine hydrate and 5-p-nitrophenylfurfural that is sensitive to and can detect Cu²⁺ within 100 s. The response mechanism of the N2 probe to Cu²⁺ was studied by several methods such as Job's plots and MS analysis, which showed that the Cu²⁺ and the N2 probe were coordinated in a complexation ratio of 1:1. In addition, compared with other cations investigated in this study, the N2 probe showed excellent selectivity and sensitivity to Cu²⁺, exhibiting distinct fluorescence absorption at 525 nm. Furthermore, in the equivalent range of 0.1-1.5, there is a good linear relationship between Cu²⁺ concentration and fluorescence intensity, and the detection limit is 0.10 μM. It is worth mentioning that the reversible reaction between the N2 probe and Cu²⁺, as well as the good biocompatibility shown by the probe in bioimaging, make it a promising candidate for Cu²⁺ biosensor applications.

Fluorescent sterol probes for intracellular transport, imaging, and therapeutics

Sterols play a significant role in many physiological processes affecting membrane organization, transport, permeability, and signal transduction. The development of fluorescent sterol analogs that have immediate functional relevance to the natural biomolecules is one approach to understanding the sterol-driven physiological processes. Visualizing cellular compartments with tailor-made fluorescent molecules through specific labeling methods enables organelle targeting and reveals dynamic information. In this review, we focus on the recent literature published between 2020 and 2022, with particular emphasis on extrinsic fluorophores and their investigations of sterol-driven biological processes involving sterol transport, biomolecular interactions, and biological imaging.

A Novel Reversible Fluorescent Probe for Cu2+and S2-Ions and Imaging in Living Cells

A novel fluorescent probe TSOC (thiazole salicylaldehyde oxazole chlorinated) was synthesized based on benzothiazole conjugated olefinic bond with salicylicaldehyde unit as fluorophore and a phenyl oxazole unit as bonding unit. The probe could reversibly detect of Cu2+ and S2- over other common ions with longer emission and large stokes shift in an aqueous solution at pH 7.3 (DMSO-Hepes, v/v, 5:1, 10 mM). The bonding mechanism was supported through the titration experiment of fluorescence and absorption spectroscopy, 1H-NMR titration, HR-MS and DFT calculations. Moreover, the probe further exhibited good cell permeability and were successfully used to visualize Cu2+ and S2- in living cells.

A new fluorescence probe for detection of Cu+2 in blood samples: Circuit logic gate

A Fluorescence probe was designed based on 8-hydroxyquinoline chitosan silica precursor (HQCS) for selective detection of Al³⁺, Cu²⁺. The HQCS has no observable fluorescence signal, but after the addition of Al³⁺, a huge fluorescence signal appeared, and the selective quenching was absorbed after the addition of Cu²⁺. The effect of other different cations, including Cu²⁺, Mg²⁺, Ca²⁺, Pb²⁺, Zn²⁺, Hg²⁺, Ag⁺, Fe^3+, and K⁺ was studied. The addition of Cu²⁺ to the probe (HQCSAL) decreased the fluorescence very repeatable, and the variation of the fluorescence vs. Cu²⁺ was monotonic and linear. Therefore, the prepared probe was used to determine Cu²⁺ ions in real samples. The mechanism of fluorescence variation by adding cations to the probe solution was studied using the Stern-Volmer equation. Under the optimum conditions, the linear range and detection limit were 3.5-31 μM and 1 μM, respectively. The probe accuracy on the copper determination in the blood and tap waters was comparable to the ICP-OES results. The circuit logic gate mimic was designed for the fluorescence behavior of the probe constituents.

N-alkylation briefly constructs tunable multifunctional sensor materials: Multianalyte detection and reversible adsorption

A series of N-alkyl-substituted polybenzimidazoles (SPBIs), synthesized by simple condensation and N-alkylation, act as functional materials with tunable microstructures and sensing performance. For their controllable morphologies, the formation of nano-/microspheres is observed at the n(RBr)/n(PBI) feed ratio of 5:1. Products with different degrees of alkylation can recognize metal ions and nitroaromatic compounds (NACs). For example, SPBI-c, obtained at the feed ratio of 1:1, can selectively detect Cu2+, Fe3+, and NACs. By contrast, SPBI-a, obtained at the feed ratio of 0.1:1, can exclusively detect Cu2+ with high sensitivity. Their sensing mechanisms have been studied by FT-IR spectroscopy, SEM, XPS, and DFT calculations. Interestingly, the SPBIs can adsorb Cu2+ in solution and show good recyclability. These results demonstrate that polymeric materials with both sensing and adsorption applications can be realized by regulating the alkylation extent of the main chain, thus providing a new approach for the facile synthesis of multifunctional materials.

A Self-Assembled Nanoindicator from Alizarin Red S-Borono-Peptide for Potential Imaging of Cellular Copper(II) Ions

Recently, smart nanomaterials from peptide self-assembly have received extensive attention in the field of biological and medical applications. Through rationally designing the molecular structure, we constructed a borono-peptide that self-assembled into well-defined nanofibers. Relying on the specific recognition between the vicinal diol compound and boronic acid, a novel alizarin red S (ARS)-borono-peptide (BP) spherical nanoindicator was fabricated, accompanying with the emission of strong fluorescent signal. The fluorescent nanoindicator displayed an intense response to copper(II) ions and underwent the fluorescent "turn-off" due to the strong binding-induced displacement. Originating from the high selectivity toward copper(II) ions, good biocompatibility and cancer cell targeting, the nanoindicator offered the opportunity to image copper(II) ions in cancer cells via fluorescent change.

A novel chemosensor for the distinguishable detections of Cu2+ and Hg2+ by off-on fluorescence and ratiometric UV-visible absorption

A novel dual-functional chemosensor, derived from the conjugation of rhodamine B with a quinoline derivative (RHQ), was firstly synthesized with high efficiency and cost-effectiveness for the distinguishable detections of Cu²⁺ and Hg²⁺ via ring-opening and ring-forming mechanism. The chemosensor exhibits highly selective and distinguishable responses for Cu²⁺ and Hg²⁺ in CH₃CN-H₂O (4:1, v/v) with off-on fluorescence and ratiometric ultraviolet-visible (UV-Vis) absorption changes. Additionally, Cu²⁺ is identified by opening a rhodamine spirocycle with a UV-Vis absorption band, at around 560 nm and fluorescence turn-on. Interestingly, Hg²⁺ is discerned by opening the rhodamine spirocycle and by generating a new special cycle for the quinoline unit. Resultantly, there were two UV-Vis absorption bands at around 365 nm and 560 nm, which were accompanied by fluorescence turn-on. Moreover, the chemosensor can quantitatively detect Cu²⁺ and Hg²⁺ by off-on fluorescence and ratiometric UV-Vis absorption changes, respectively. Furthermore, the chemosensor with low cytotoxicity could be successfully administered to monitor Cu²⁺ and Hg²⁺ in living cells. This work may pay the way for the development of dual-functional chemosensor for quantificationally detecting metal ions in environmental and biological systems.

A novel fluorescent BODIPY-based probe for detection of Cu2+ and H2S based on displacement approach

A new BODIPY-based fluorescent probe (BC-DPA) was prepared by a simple method for Cu²⁺ detection in aqueous media and living cells. BC-DPA displayed excellent selectivity toward Cu²⁺via fluorescence "turn-off" mode when a mononuclear Cu(Ⅱ) complex is formed. The corresponding BC-DPA-Cu(Ⅱ) complex, whose structure was characterized by X-ray crystallography, has Cu(Ⅱ) in a distorted octahedral geometry. On the basis of the displacement approach, the fluorescence of BC-DPA-Cu²⁺ was recovered in the presence of S^2-, which allowed the system to act as a sensitive "turn-on" sensor for hydrogen sulfide. Furthermore, BC-DPA exhibited noticeable permeability and low cytotoxicity, making it a useful tool to detect Cu²⁺ in biosystems.

A dual-channel chemosensor based on 8-hydroxyquinoline for fluorescent detection of Hg2+ and colorimetric recognition of Cu2

A novel dual-channel chemosensor, 7-allylquinolin-8-ol (AQ), was synthesized based on 8-hydroxyquinoline for selective fluorescence detection of Hg²⁺ and colorimetric recognition of Cu²⁺. The chemosensor reacted with Hg²⁺ and generated a new Hg-containing compound with significantly enhanced fluorescence, which turned from faint blue to strong green. Further experiments indicated that AQ could be used to quantitatively detect Hg²⁺ via fluorescence spectroscopy with a low detection limit (2.1 nM). The good reversibility of the synthesized chemosensor was also demonstrated using NaBH₄. Moreover, AQ was successfully used for the detection of Cu²⁺ through the formation of a stable coordination compound, which exhibited an ultraviolet-visible (UV-Vis) ratiometric change, while its color changed from colorless to pale yellow under natural light. Additional experiments using various Cu²⁺ concentrations showed that the developed chemosensor could be further employed for the quantitative ratiometric estimation of Cu²⁺ by UV-Vis.

Application of rare earth-doped nanoparticles in biological imaging and tumor treatment

Rare earth-doped nanoparticles have been widely used in disease diagnosis, drug delivery, tumor therapy, and bioimaging. Among various bioimaging methods, the fluorescence imaging technology based on the rare earth-doped nanoparticles can visually display the cell activity and lesion evolution in living animals, which is a powerful tool in biological technology and has being widely applied in medical and biological fields. Especially in the band of near infrared (700–1700 nm), the emissions show the characteristics of deep penetration due to low absorption, low photon scattering, and low autofluorescence interference. Furthermore, the rare earth-doped nanoparticles can be endowed with the water solubility, biocompatibility, drug-loading ability, and the targeting ability for different tumors by surface functionalization. This confirms its potential in the cancer diagnosis and treatment. In this review, we summarized the recent progress in the application of rare earth-doped nanoparticles in the field of bioimaging and tumor treatment. The luminescent mechanism, properties, and structure design were also discussed.