Rapid determination of fumonisin (FB1) by syringe SPE coupled with solid-phase fluorescence spectrometry

Solid-phase fluorescence: Reproducibility and comparison with the solution states

Solid-phase fluorescence excitation-emission matrix (SPF-EEM) spectroscopy has potential for non-extractive, non-destructive, and non-contact analytical measurements of powder and solid-state samples, as well as front-face EEM spectroscopy for suspensions of high optical density. However, as there is no unified measurement method for SPF spectroscopy, comparing samples measured in different research fields is difficult. Therefore, this study designs a cell that can be created by a 3D printer and examines reproducibility on measuring fluorescent powders. The developed cell is applied to proteins (ovalbumin, BSA, gliadin, gluten, powdered collagen, casein), amino acids (tryptophan, tyrosine, and phenylalanine), soybean ingredients (daidzein, and genistein), and fluorescent chemicals (rhodamine B, fluorescein sodium salt, pyrene, and quinine sulfate dihydrate) and their spectra are compared with those in the solution states. When samples are refilled into the cell three times, the cell exhibits high reproducibility in terms of fluorescence peak wavelength and intensity. The solid proteins exhibit peaks attributed to the fluorescent amino acid residues, and broad peaks which are not detected for the proteins in the solution states. Powdered rhodamine B and fluorescein sodium salt do not exhibit fluorescence, possibly due to the inner-filter effect (IFE). Some non-colored molecules also exhibit loss of fluorescence or a remarkable difference between the solid and solution states, possibly due to the interaction of the fluorescent structure with the surrounding local environment, similar to the solvent effect, which is possibly affected by the molecular proximity, three-dimensional structure, and moisture absorption capacity.

Fluoranthene determination based on a rapid and sensitive syringe extraction and solid-phase fluorescence technique

A rapid and sensitive strategy was proposed for the detection of fluoranthene (FL), which is a polycyclic aromatic hydrocarbon (PAH), in water samples. In this work, syringe solid-phase extraction (SPE) combined with solid-phase fluorescence spectrometry was used to determine FL in PAHs polluted environmental samples. The fluorescence signals were directly monitored on the membrane surface after FL was enriched by syringe SPE. Under the optimal conditions, the proposed method showed a linear relationship in the concentration range 2-50 μg/L with a correlation coefficient (R2 ) of 0.998, and the limit of detection was 0.143 μg/L. The recoveries varied from 93.47% to 109.81% in the actual samples, with the relative standard deviations (n = 3) ranging from 2.06% to 6.32%. According to the results, the established method can be applied in the field of rapid detection as it is fast, simple, portable, and highly sensitive, and has strong anti-interference.

Recent Insights into Sample Pretreatment Methods for Mycotoxins in Different Food Matrices: A Critical Review on Novel Materials

Mycotoxins pollution is a global concern, and can pose a serious threat to human health. People and livestock eating contaminated food will encounter acute and chronic poisoning symptoms, such as carcinogenicity, acute hepatitis, and a weakened immune system. In order to prevent or reduce the exposure of human beings and livestock to mycotoxins, it is necessary to screen mycotoxins in different foods efficiently, sensitively, and selectively. Proper sample preparation is very important for the separation, purification, and enrichment of mycotoxins from complex matrices. This review provides a comprehensive summary of mycotoxins pretreatment methods since 2017, including traditionally used methods, solid-phase extraction (SPE)-based methods, liquid-liquid extraction (LLE)-based methods, matrix solid phase dispersion (MSPD), QuEChERS, and so on. The novel materials and cutting-edge technologies are systematically and comprehensively summarized. Moreover, we discuss and compare the pros and cons of different pretreatment methods and suggest a prospect.

Nutritional impact of mycotoxins in food animal production and strategies for mitigation

Mycotoxins are toxic secondary metabolites produced by filamentous fungi that are commonly detected as natural contaminants in agricultural commodities worldwide. Mycotoxin exposure can lead to mycotoxicosis in both animals and humans when found in animal feeds and food products, and at lower concentrations can affect animal performance by disrupting nutrient digestion, absorption, metabolism, and animal physiology. Thus, mycotoxin contamination of animal feeds represents a significant issue to the livestock industry and is a health threat to food animals. Since prevention of mycotoxin formation is difficult to undertake to avoid contamination, mitigation strategies are needed. This review explores how the mycotoxins aflatoxins, deoxynivalenol, zearalenone, fumonisins and ochratoxin A impose nutritional and metabolic effects on food animals and summarizes mitigation strategies to reduce the risk of mycotoxicity.

Study on Contamination with Some Mycotoxins in Maize and Maize-Derived Foods

Crops can be contaminated by fungi which produce mycotoxins. Many fungal strains are responsible for producing varied mycotoxins. The research carried out so far has described over 400 different mycotoxins. They have chemical and physical properties that significantly differ, and they are produced by several different existing fungi. The intake of mycotoxins through food can be achieved directly, by feeding on contaminated food, or indirectly from foods of animal origin. The mycotoxin contamination of food and food products for certain animals is a phenomenon studied worldwide, in countries in Europe but also in Asia, Africa and America. The purpose of this study is to develop an evaluation of the mycotoxins prevalent in corn and corn-derived products produced in Romania. A total of 38 maize samples and 19 corn-derivative samples were investigated for the presence of mycotoxins specific to these products, such as deoxynivalenol, zearalenone and fumonisins. Fumonisins had the highest presence and zearalenone had the lowest. The limits determined for the three mycotoxins were always in accordance with legal regulations.

Rapid determination of trace Cu2+ by an in-syringe membrane SPE and membrane solid-phase spectral technique

A new in-syringe membrane SPE and solid-phase visible spectral method was proposed for the rapid extraction and visible spectral determination of trace Cu²⁺. The chelation and membrane SPE can be accomplished in a syringe. The yellow Cu(DDTC)₂ complex was separated using a polyethersulfone membrane from the sample solution. Then, the complex can be detected directly on the polyethersulfone membrane utilizing solid-phase visible absorbance spectra without elution. The proposed method simplified the experimental procedure and improved the sensitivity to the μg L^-1 level. Furthermore, this method is environmentally friendly since it avoids the use of organic solvents. After the investigation of the influence of different variables on the membrane SPE procedure, water and blood plasma were analyzed to validate the proposed method. A LOD of 0.04 μg L^-1 and recoveries of 96.0-103.7% confirmed that the present work can be applied for the determination of trace Cu²⁺ in water and blood plasma samples.

Response of Fecal Bacterial Flora to the Exposure of Fumonisin B1 in BALB/c Mice

Fumonisins are a kind of mycotoxin that has harmful influence on the health of humans and animals. Although some research studies associated with fumonisins have been reported, the regulatory limits of fumonisins are imperfect, and the effects of fumonisins on fecal bacterial flora of mice have not been suggested. In this study, in order to investigate the effects of fumonisin B1 (FB1) on fecal bacterial flora, BALB/c mice were randomly divided into seven groups, which were fed intragastrically with 0 mg/kg, 0.018 mg/kg, 0.054 mg/kg, 0.162 mg/kg, 0.486 mg/kg, 1.458 mg/kg and 4.374 mg/kg of FB1 solutions, once a day for 8 weeks. Subsequently, feces were collected for analysis of microflora. The V3-V4 16S rRNA of fecal bacterial flora was sequenced using the Illumina MiSeq platform. The results revealed that fecal bacterial flora of mice treated with FB1 presented high diversity. Additionally, the composition of fecal bacterial flora of FB1 exposure groups showed marked differences from that of the control group, especially for the genus types including Alloprevotella, Prevotellaceae_NK3B31_group, Rikenellaceae_RC9_gut_group, Parabacteroides and phylum types including Cyanobacteria. In conclusion, our data indicate that FB1 alters the diversity and composition of fecal microbiota in mice. Moreover, the minimum dose of FB1 exposure also causes changes in fecal microbiota to some extent. This study is the first to focus on the dose-related effect of FB1 exposure on fecal microbiota in rodent animals and gives references to the regulatory doses of fumonisins for better protection of human and animal health.

Evaluation of mycotoxins and heavy metals pollution in some types of noodles in local markets

This study was conducted to estimation mycotoxins and some heavy metals in some types of noodles in Salah Al-din governorate markets. In this study 6 species of Aspergillus were detected which were A. flavus, A. parasiticus, A. fumigatus, A. terreus, A. ochraceus and A. niger and 5 genus of fungi were Fusarium verticillioides, Penicillium, Mucor, Alternaria and Rhizopus isolated on the three types of media used. The results show presence of the three types of mycotoxins in all samples. The concentrations of the aflatoxin B1 ranged between 1.145 - 5.041 ppm. Concentrations of fumonisin between 8.498 - 19.496 ppm. Concentrations of ochratoxin A ranged between 3.960 - 52.543 ppm. The results also show that the concentration of copper and cadmium was at (0.50 - 1.23) (0.05 - 0.31) ppm respectively, while the concentration of lead was less than 0.1 ppm in all samples.

Aptamer-based detection of fumonisin B1: A critical review

Mycotoxin contamination is a current issue affecting several crops and processed products worldwide. Among the diverse mycotoxin group, fumonisin B1 (FB1) has become a relevant compound because of its adverse effects in the food chain. Conventional analytical methods previously proposed to quantify FB1 comprise LC-MS, HPLC-FLD and ELISA, while novel approaches integrate different sensing platforms and fluorescently labelled agents in combination with antibodies. Nevertheless, such methods could be expensive, time-consuming and require experience. Aptamers (ssDNA) are promising alternatives to overcome some of the drawbacks of conventional analytical methods, their high affinity through specific aptamer-target binding has been exploited in various designs attaining favorable limits of detection (LOD). So far, two aptamers specific to FB1 have been reported, and their modified and shortened sequences have been explored for a successful target quantification. In this critical review spanning the last eight years, we have conducted a systematic comparison based on principal component analysis of the aptamer-based techniques for FB1, compared with chromatographic, immunological and other analytical methods. We have also conducted an in-silico prediction of the folded structure of both aptamers under their reported conditions. The potential of aptasensors for the future development of highly sensitive FB1 testing methods is emphasized.

Advances in Occurrence, Importance, and Mycotoxin Control Strategies: Prevention and Detoxification in Foods

Mycotoxins are toxic substances that can infect many foods with carcinogenic, genotoxic, teratogenic, nephrotoxic, and hepatotoxic effects. Mycotoxin contamination of foodstuffs causes diseases worldwide. The major classes of mycotoxins that are of the greatest agroeconomic importance are aflatoxins, ochratoxins, fumonisins, trichothecenes, emerging Fusarium mycotoxins, enniatins, ergot alkaloids, Alternaria toxins, and patulin. Thus, in order to mitigate mycotoxin contamination of foods, many control approaches are used. Prevention, detoxification, and decontamination of mycotoxins can contribute in this purpose in the pre-harvest and post-harvest stages. Therefore, the purpose of the review is to elaborate on the recent advances regarding the occurrence of main mycotoxins in many types of important agricultural products, as well as the methods of inactivation and detoxification of foods from mycotoxins in order to reduce or fully eliminate them.