Fabrication and SERS performance of silver nanoarrays by inkjet printing silver nanoparticles ink on the gratings of compact disc recordable

Optimization of physical vapor deposition process for low background nanoimprinted SERS substrate in quantitative melamine analysis

Uniformity, sensitivity, reproducibility, and cost are the critical parameters of practical surface-enhanced-Raman-spectroscopy (SERS) substrates. Herein, we proposed a High-Aspect-Ratio-Nano-Pillar-Array (HARNPA) substrate deposited silver by physical vapor deposition (PVD) methods (e.g. E-beam evaporation, sputtering, and a two-stage intermittent sputtering) to fabricate high-performance SERS substrates. The substrate by the E-beam evaporation has a significant SERS effect, but the Raman background induced by the exposure of the polymer HARNPA limits the analyte choice. The substrate by the sputtering method has better step coverage of silver but a lower enhancement factor. Therefore, we proposed a process of two-stage intermittent sputtering to solve these limitations. In addition, we define a factor called the signal-to-background peak ratio (S/B peak ratio) to evaluate the influence of the Raman background from the SERS substrate. Finally, we accomplished a SERS substrate with an S/B peak ratio of 3.48 by intermittent sputtering, which has the best linearity (R2 = 0.97) of the melamine concentration curve and the lowest detection limit (LoD = 5.6 × 10-7 M) that meets the regulatory requirements for melamine detection (3.96 × 10-6 M). The benefits of our SERS substrates are easy fabrication, high sensitivity (EF = 1.44 × 107), high reproducibility (CV = 8.4 %), and excellent uniformity (CV = 7 % in 4″ area), which are beneficial for mass production in the future.

SERS-active substrates using DVD-R coated in silver thin films: A preliminary study for detection of commercial glyphosate

Glyphosate (GLP) is the herbicide with the highest level of global commercialization and historical use. Even though numerous studies have found this substance to be harmless, current research demonstrates that GLP might affect human health. For this reason, researcher efforts are concentrating on alternatives for analytical quantification, such as Surface Enhanced Raman Spectroscopy (SERS). In this work, a DVD-R@AgNPs SERS substrate was produced by the Cathodic Cage Plasma Deposition (CCPD) technique, which allowed a thin film layer deposition of silver nanoparticles (AgNPs) on the PC grating structure from Digital Video/Versatile Disc Recordable (DVD-R). Scanning Electron Microscopy with energy-dispersive X-ray spectroscopy was used to characterize the substrate and chemical changes on the surface after AgNPs deposition. The DVD-R@AgNPs substrate was used to detect standard crystal violet (CV), GLP, and RoundupTM GLP (GLP-RU) using Raman Spectroscopy. The CV was used as a control sample for SERS measurement, allowing the calculation of the substrate enhancement factor, which was in the order of ∼ 105. To evaluate the efficiency of the SERS substrate, the limit of detection was calculated and showed values of ∼ 10-10 mol/L for CV, 10-7 and 10-8 mol/L for GLP, and 10-6 mol/L for GLP-RU. Thus, the DVD-R@AgNPs SERS sensor is a low-cost substrate that analyzes traces of pesticides such as commercial GLP, demonstrating high SERS sensitivities and many applications.

Anti-counterfeiting SERS security labels derived from silver nanoparticles and aryl diazonium salts

The development of anti-counterfeiting inks based on surface-enhanced Raman scattering (SERS) labels have attracted great interest in recent years for their use as security labels in anti-counterfeiting applications. Indeed, they are promising alternatives to luminescent inks, which suffer from several limitations including emission peak overlap, toxicity and photobleaching. Most of the reported SERS security labels developed so far rely on the use of thiolate self-assembled monolayers (SAMs) for the immobilization of Raman reporters on metallic nanoparticle surface. However, SAMs are prone to spontaneous desorption and degradation under laser irradiation, thereby compromising the ink long-term stability. To overcome this issue, we develop herein a new generation of SERS security labels based on silver nanoparticles (Ag NPs) functionalized by aryl diazonium salts, carrying various substituents (-NO₂, -CN, -CCH) with distinguishable Raman fingerprints. The resulting SERS tags were fully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis absorption and SERS. Then, they were incorporated into ink formulations to be printed on polyethylene naphthalate (PEN) substrates, using handwriting or inkjet printing. Proof-of-concept Raman imaging experiments confirmed the remarkable potential of diazonium salt chemistry to design Ag NPs-based SERS security labels.

Gold nanoparticle decorated blu-ray digital versatile disc as a highly reproducible surface-enhanced Raman scattering substrate for detection and analysis of rotavirus RNA in laboratory environment

Detection and estimation of various biomolecular samples are often required in research and clinical laboratory applications. Present work demonstrates the functioning of a surface-enhanced Raman scattering (SERS) substrate that has been obtained by drop-casting of citrate-reduced gold nanoparticles (AuNPs) of average dimension of 23 nm on a bare blu-ray digital versatile disc (BR-DVD) substrate. The performance of the proposed SERS substrate has been initially evaluated with standard Raman active samples, namely malachite green (MG) and 1,2-bis(4-pyridyl)ethylene (BPE). The designed SERS substrate yields an average enhancement factor of 3.2 × 10⁶ while maintaining reproducibility characteristics as good as 94% over the sensing region of the substrate. The usability of the designed SERS substrate has been demonstrated through the detection and analysis of purified rotavirus double-stranded RNA (dsRNA) samples in the laboratory environment condition. Rotavirus RNA concentrations as low as 10 ng/μL could be detected with the proposed sensing scheme.

Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications

Inkjet printing and 3D inkjet printing have found many applications in the fabrication of a great variety of devices, which have been developed with the aim to improve and simplify the design, fabrication, and performance of sensors and analytical platforms. Here, developments of these printing technologies reported during the last 10 years are reviewed and their versatile applicability for the fabrication of improved sensing platforms and analytical and diagnostic sensor systems is demonstrated. Illustrative examples are reviewed in the context of particular advantages provided by inkjet printing technologies. Next to aspects of device printing and fabrication strategies, the utilization of inkjet dispensing, which can be implemented into common analytical tools utilizing customized inkjet printing equipment as well as state-of-the-art consumer inkjet printing devices, is highlighted. This review aims to providing a comprehensive overview of examples integrating inkjet and 3D inkjet printing technologies into device layout fabrication, dosing, and analytical applications to demonstrate the versatile applicability of these technologies, and furthermore, to inspire the utilization of inkjet printing for future developments.

Surface Enhanced Raman Spectroscopy: Applications in Agriculture and Food Safety

Recent global warming has resulted in shifting of weather patterns and led to intensification of natural disasters and upsurges in pests and diseases. As a result, global food systems are under pressure and need adjustments to meet the change—often by pesticides. Unfortunately, such agrochemicals are harmful for humans and the environment, and consequently need to be monitored. Traditional detection methods currently used are time consuming in terms of sample preparation, are high cost, and devices are typically not portable. Recently, Surface Enhanced Raman Scattering (SERS) has emerged as an attractive candidate for rapid, high sensitivity and high selectivity detection of contaminants relevant to the food industry and environmental monitoring. In this review, the principles of SERS as well as recent SERS substrate fabrication methods are first discussed. Following this, their development and applications for agrifood safety is reviewed, with focus on detection of dye molecules, melamine in food products, and the detection of different classes of pesticides such as organophosphate and neonicotinoids.

Inkjet printed silver nanoparticles on hydrophobic papers for efficient detection of thiram

Silver nanoparticles coated paper (AgNPs-paper) substrates were prepared by inkjet printing Ag ink on four different wettability papers. Scanning electron microscope and contact angle analyzer were used to characterize their surface morphology and wettability. AgNPs-paper substrates were used to detect the surface-enhanced Raman scattering (SERS) spectra of thiram aqueous solution. Relationships between the surface wettability, surface morphology and SERS activities of the substrates were systematically studied. The silver nanoparticles deposited on the hydrophobic papers (photographic paper, graph paper, and weighing paper) were evenly and densely arranged. While in-homogeneous distribution was observed on the hydrophilic printing paper. It can be found that the AgNPs-photographic paper with the maximum contact angle exhibited the highest SERS enhancement. The detection limit for thiram adsorbed on the AgNPs-photographic paper was 10^-10 mol/L, which was lower than the others. Good linear responses (R² = 0.9918, 0.9897) between the SERS intensities and logarithmic concentrations were obtained from 10⁴ to 10^-10 mol/L. Moreover, the substrate had good uniformity and reproducibility with relative standard deviation values of 4.20% and 4.90% measured by eight points and ten substrates, respectively. The AgNPs-photographic paper exhibited high stability within eight months.