Carbon quantum dots (CQDs) modified ZnO/CdS nanoparticles based fluorescence sensor for highly selective and sensitive detection of Fe(III)

Highly-fluorescent extracts from Pterocarpus wood for Fe3+ ion detection

At present, excessive Fe3+ in daily water has become a threat to human health. Among the conventional detection methods for Fe3+, fluorescent probes have been applied on a large scale due to their simplicity and efficiency. However, the currently available fluorescent probes are difficult to synthesize, costly and environmentally unfriendly, limiting their applications. In this work, a fluorescent extract of Pterocarpus wood was successfully obtained, and the structure of some coumarin-based molecules in this extract was determined by 2D-NMR. Subsequently, the intensity of this fluorescence was optimized using response surface methodology (RSM), resulting in a high-intensity fluorescent probe. The probe was sensitive to the concentrations of Fe3+ and MnO4-, and could efficiently detects Fe3+ in the range of 2.7 μM-8.0 μM, with LOD and LOQ reaching 1.06 μM and 3.20 μM, respectively. Moreover, based on the strong complexation property of EDTA on Fe3+, this work designed the "switch-on" fluorescent probes. The experiment shows that both static and dynamic quenching exist in this system. The mechanism of complexation and oxidation of fluorescent molecules by the quencher is interpreted in the quenching reaction. In addition, the fluorescent probe has a high yield and low cost, it also performs well in actual water sample tests. This method is expected to be developed as a new way on Fe3+ detection.

A Polycaprolactone-Capped ZnO Quantum Dots-Based Fluorometric Sensor for the Detection of Fe3+ Ions in Seawater

Fe3+ ion plays a very active role in life, agriculture, and industry. Human health and the environment are seriously affected by the abnormal presence or excess of this cation. Therefore, the development of a fast, reliable, sensitive, and simple fluorescent probe to detect this cation is crucial. In the present paper, polycaprolactone-capped zinc oxide quantum dots were prepared for the determination of Fe3+ ions. The proposed fluorescent chemosensor exhibited a fluorometric and strong quenching effect toward Fe3+ ions at two wavelengths (303 and 602 nm). The limit of detection (LOD) was calculated as 0.410, and 0.333µM at the mentioned wavelengths. Also, the binding stoichiometric ratio was calculated as 1:1 by Job's plot. The findings indicated that the PCL@ZnO colorimetric chemosensor could be successfully applied with reliable, and good accuracy for the detection of Fe3+ ions in real seawater samples.

Poly(Lysine)-Derived Carbon Quantum Dots Conquer Enterococcus faecalis Biofilm-Induced Persistent Endodontic Infections

Introduction

Persistent endodontic infections (PEIs) mediated by bacterial biofilm mainly cause persistent periapical inflammation, resulting in recurrent periapical abscesses and progressive bone destruction. However, conventional root canal disinfectants are highly damaging to the tooth and periodontal tissue and ineffective in treating persistent root canal infections. Antimicrobial materials that are biocompatible with apical tissues and can eliminate PEIs-associated bacteria are urgently needed.

Methods

Here, ε-poly (L-lysine) derived carbon quantum dots (PL-CQDs) are fabricated using pyrolysis to remove PEIs-associated bacterial biofilms.

Results

Due to their ultra-small size, high positive charge, and active reactive oxygen species (ROS) generation capacity, PL-CQDs exhibit highly effective antibacterial activity against Enterococcus faecalis (E. faecalis), which is greatly dependent on PL-CQDs concentrations. 100 µg/mL PL-CQDs could kill E. faecalis in 5 min. Importantly, PL-CQDs effectively achieved a reduction of biofilms in the isolated teeth model, disrupting the dense structure of biofilms. PL-CQDs have acceptable cytocompatibility and hemocompatibility in vitro and good biosafety in vivo.

Discussion

Thus, PL-CQDs provide a new strategy for treating E. faecalis-associated PEIs.

Applications of Functionalized Carbon-Based Quantum Dots in Fluorescence Sensing of Iron(III)

Iron, an essential trace element exhibits detrimental effects on human health when present at higher or lower concentration than the required. Therefore, there is a pressing demand for sensitive and selective detection of Fe3+ in water, food etc. Unfortunately, in several instances, the traditional approaches suffer from a number of shortcomings like complicated procedures, limited sensitivity, poor selectivity and more expensive and time consuming. The scope of optical tuning and excellent photophysical properties of carbon- based nanomaterials like carbon dots (C-dots) and graphene dots (g-dots) have made them promising optical sensors of metal ions. Moreover, high surface area, superior stability of such materials contributes towards the fruitful development of sensors. The present review offered critical information on the fabrication and fluorimetric applications of these functional nanomaterials for sensitive and selective detection of Fe3+. An in-depth discussion on fluorescent C-dots made from naturally occurring materials and chemical techniques were presented. Effect of doping in C-dots was also highlighted in terms of improved fluorescence response and selectivity. In a similar approach g-dots were also discussed. Many of these sensors exhibited great selectivity, superior sensitivity, high quantum yield, robust chemical and photochemical stability and real-time applicability. Further improvement in these factors can be targeted to develop new sensors.

An "on-off-on" Fluorescent Sensor Based on Carbon Dots for the Detection of Au (III) and Creatinine

The present study proposes a new approach for detecting trace amounts of creatinine (Cre) through the utilization of a fluorescence sensor system consisting of nitrogen doped carbon dots (NCDs) and gold ions (Au3+). Yellow fluorescent carbon dots were prepared using a one-step hydrothermal method with o-phenylenediamine and isopropanol as raw materials. First, gold ions are reduced to gold nanoparticles (Au NPs), which bind to NCDs, resulting in electron transfer and fluorescence quenching of NCDs. After adding creatinine, Cre and Au NPs were preferentially combined to form non-fluorescent complexes, and the NCDs fluorescence was restored. The study achieved a detection limit of 1.06 × 10-7 M for Au3+ and 9.29 × 10-9 M for creatinine, indicating a high level of sensitivity. The sensing system has also been successfully utilized for detecting Au3+ in lake water and Cre in human urine, indicating its promising potential and practical applications in the areas of environmental monitoring and biosensing.

An optical and visual multi-mode sensing platform base on nitrogen, sulfur, boron co-doped carbon dots for rapid and simple determination of ferric ions in water

Abnormal iron ions levels may lead to some diseases and serious environmental pollution. Herein, optical and visual detection strategies of Fe3+ in water based on co-doped carbon dots (CDs) were established in the present study. Firstly, a one-pot synthetic strategy for the preparation of the N, S, B co-doped CDs with a home microwave oven was developed. Secondly, the optical properties, chemical structures, and morphology of CDs were further characterized by fluorescence spectroscopy, Uv-vis absorption spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscope. Finally, the results indicated that the fluorescence of the co-doped CDs was quenched by ferric ions via the static mechanism and the aggregation of CDs, accompanied by the increased red color. The multi-mode sensing strategies of Fe3+ with fluorescence photometer, UV-visible spectrophotometer, portable colorimeter and smartphone had the advantages of good selectivity, excellent stability and high sensitivity. Fluorophotometry based on co-doped CDs was a powerful probe platform for measuring lower concentrations of Fe3+ due to its higher sensitivity, better linear relationship, lower limit of detection (0.27 μM) and limit of quantitation (0.91 μM). In addition, the visual detection methods with a portable colorimeter and smartphone had been proven to be very suitable for rapid and simple sensing of higher concentrations of Fe3+. Moreover, the co-doped CDs utilized for Fe3+ probes in tap water and boiler water obtained satisfactory results. Consequently, the efficient, versatile optical and visual multi-mode sensing platform could be extended to apply such a visual analysis of ferric ions in the biological, chemical and other fields.

Construction of an ultra-small hydrazone-linked covalent organic polymer for selective fluorescent detection of ferric ion in aqueous solution

A novel ultra-small hydrazone-linked covalent organic polymer (UHCOP) was synthesized based on the Schiff-base reaction between 2,4,6-trihydroxy-1,3,5-benzenetricarbaldehyde and 1,4-benzenedicarbohydrazide at room temperature and utilized as a sensitive fluorescent sensor for rapid (<2 min) and selective detection of Fe³⁺ in aqueous solution. The prepared UHCOP displayed ultra-small size with the diameter of 7.98 ± 0.97 nm and gave a stable fluorescent emission at 510 nm. UHCOP exhibited good sensitivity and highly selectivity towards Fe³⁺. The coordination interaction between UHCOP and Fe³⁺ resulted in the obviously aggregation-caused quenching response of UHCOP. The linear range was from 5.0 μM to 1.4 mM (R² = 0.999) with the detection limit of 2.5 μM. Finally, UHCOP has been successfully applied in the detection of Fe³⁺ in real water samples, proving the fabricated UHCOP is promising as a sensitive fluorescent sensor for selective detection of Fe³⁺ in aqueous solution.

Fluorescence sensing by carbon nanoparticles

Sensing is one of the most important fields in which chemists, engineers and other scientists are involved to realize sensoristic devices that can detect different analytes, both chemicals and biologicals. In this context, fluorescence sensing paves the way for the realization of smart sensoristic devices due to the possibility to detect the target analyte via a change in colour or emission. Recently (since 2006), carbon nanoparticles, which are a "new class" of nanostructures based on carbon atoms, have been widely used in sensing applications due to their intriguing optical properties. The scientific literature on this topic started from 2006 and a progressive increase in the corresponding number of publications has been observed. This review summarises the application of carbon nanoparticles in the sensing field, focusing on chemical and ion sensing.

Carbon Quantum Dots-Based Fluorescent Hydrogel Hybrid Platform for Sensitive Detection of Iron Ions

In this study, we prepared novel fluorescent carbon quantum dots/hydrogel nanocomposite material (CQDsHG) with good adsorption and stable fluorescence detection of Fe3+. The materials were subsequently characterized according to their morphological features, chemical composition, adsorption, and optical properties. The carbon quantum dots (CQDs) were prepared using a microwave-assisted hydrothermal method in no more than 15 min, and the as-prepared CQDs exhibited excellent water solubility, as well as emitted strong bright blue fluorescence with an ultrahigh quantum yield of 93.60%. The CQDs were then loaded into a hydrogel (HG) using the sol-gel method to obtain a functional CQDsHG. The CQDsHG exhibited high adsorption amounts (31.94 mg/g) and a good quenching response for Fe3+, thus, it could be used as a sensor to selectively detect Fe3+ in the linear range of 0–150 μM with a detection limit of 0.24 μM. We observed minimal difference in the fluorescence lifetimes between the CQDsHG with and without a quencher (Fe3+), with values of 5.816 ns and 5.824 ns, respectively, confirming that Fe3+ was statically quenched on CQDsHG. The results indicated that the innovative combination of CQDs and HG can improve the synergistic performance of each component for the adsorption and quantitative detection of heavy metal ions in the aqueous environment.

Recent Progress of Fluorescence Sensors for Histamine in Foods

Biological amines are organic nitrogen compounds that can be produced by the decomposition of spoiled food. As an important biological amine, histamine has played an important role in food safety. Many methods have been used to detect histamine in foods. Compared with traditional analysis methods, fluorescence sensors as an adaptable detection tool for histamine in foods have the advantages of low cost, convenience, less operation, high sensitivity, and good visibility. In terms of food safety, fluorescence sensors have shown great utilization potential. In this review, we will introduce the applications and development of fluorescence sensors in food safety based on various types of materials. The performance and effectiveness of the fluorescence sensors are discussed in detail regarding their structure, luminescence mechanism, and recognition mechanism. This review may contribute to the exploration of the application of fluorescence sensors in food-related work.

Electrochemical process of early-stage corrosion detection based on N-doped carbon dots with superior Fe3+ responsiveness

Iron corrosion is a subject of great technological importance and extensive public concern. However, the highly efficient detection of iron corrosion at early stage is still a challenging task. Herein, bright fluorescent carbon dots (CDs) with superior response to Fe³⁺ were prepared by simple solvothermal process based on citric acid and ammonia. The obtained CDs are able to rapidly, sensitively and selectively respond to Fe³⁺. The quantitative analysis showed that the CDs exhibited a linear response to Fe³⁺ in the range of 10 to 300 µM, with a detection limit of 0.9 μM. And the fluorescence quenching of CDs was obvious enough to be detected by the naked eyes. Such promising responsiveness of CDs offers a great opportunity for real-time and visual detection of Fe³⁺ during electrochemical corrosion process. In addition, due to the excellent stability and solubility of CDs, patterned papers and hydrogels have been fabricated utilizing cellulose and PVA as matrices. The as-prepared biocompatible, environmental-friendly and disposable CDs based fluorescent materials were successfully used for detecting the degree of iron corrosion. This could provide a simple and visual strategy for monitoring the safety of structural metal materials.

N-alkylation briefly constructs tunable multifunctional sensor materials: Multianalyte detection and reversible adsorption

A series of N-alkyl-substituted polybenzimidazoles (SPBIs), synthesized by simple condensation and N-alkylation, act as functional materials with tunable microstructures and sensing performance. For their controllable morphologies, the formation of nano-/microspheres is observed at the n(RBr)/n(PBI) feed ratio of 5:1. Products with different degrees of alkylation can recognize metal ions and nitroaromatic compounds (NACs). For example, SPBI-c, obtained at the feed ratio of 1:1, can selectively detect Cu2+, Fe3+, and NACs. By contrast, SPBI-a, obtained at the feed ratio of 0.1:1, can exclusively detect Cu2+ with high sensitivity. Their sensing mechanisms have been studied by FT-IR spectroscopy, SEM, XPS, and DFT calculations. Interestingly, the SPBIs can adsorb Cu2+ in solution and show good recyclability. These results demonstrate that polymeric materials with both sensing and adsorption applications can be realized by regulating the alkylation extent of the main chain, thus providing a new approach for the facile synthesis of multifunctional materials.

A Pyrene Fluorescent Probe for Rapid Detection of Ferric Ions

The 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt (PTSA) is a pyrene derivative with high fluorescence characteristics and is widely used in fluorescence tracer. This study aims at investigating a simple and fast fluorescence detection method for determining the concentration of ferric ion by using PTSA, which the principle is that the fluorescence quenching of PTSA by ferric ions. Theoretical and experimental methods were adopted to deeply analyze its detection performance and characteristics. The fluorescence quenching phenomena under different pH conditions and the effect of the different interfering metal ions on PTSA/Fe³⁺ system was studied. The results showed that the PTSA was quite promising for the fluorescence detection of trace ferric ions, and the limit of detection is 9 μg/L. This study is envisioned to provide inspirational insights on trace detection of iron ions, opening new routes for water monitoring use fluorescence properties.

Limitation-induced fluorescence enhancement of carbon nanoparticles and their application for glucose detection

Rational design of detection strategy is the key to high-performance fluorescence analysis. In this article, we found that the glucose-induced limitations can greatly enhance the fluorescence of functionalized carbon nanoparticles (CNPs), which are synthesized through one-step thermal pyrolysis method using phenylboronic acid derivative as the precursors. The glucose can assembly onto the surface of the CNPs to form a "shell", limiting the surfaces' intramolecular rotation and reducing non-radiative decay, which hence resulted in enhanced fluorescence of the CNPs. Under optimal conditions, the fluorescence intensity of the CNPs is nearly 70-fold enhanced, and the method has low detection limit (10 μM) and linear response in the concentration range from 50 μM to 2000 μM. Based on this interesting "target-triggered limitation-induced fluorescence enhancement" phenomenon, a simple and effective non-enzymatic fluorescence enhancement method was developed and successfully applied to the determination of glucose in spiked serum samples. This work provides new insight into the design of fluorescence-enhanced detection strategies based on the limitation-induced property.

Biologically synthesized ZnS quantum dots as fluorescent probes for lead (II) sensing

This manuscript presents a robust strategy for selective Pb(II) sensing based on a fluorescence turn-off mechanism using ZnS quantum dots (QDs) biosynthesized using Aspergillus sp. The biogenic nanoprobe displayed marked sensing efficiency in the presence of Pb ions over concentration ranges from 5 to 100 μM with limits of detection of around 2.45 μM. Performance optimization studies revealed that the maximum fluorescence quenching efficiency was obtained in the presence of [ZnS NPs] at 4 mg/ml, and alkaline pH of 10 recorded under stable ambient temperature for approximately 5 min for the quenching process. Advanced morphological analysis indicated that the bio-sensing mechanism was essentially a surface-based phenomenon in which the Pb ions were in very close proximity to the QDs and formed stable ground-state Pb-ZnS complexes, resulting in a quenched fluorescence of the QDs. Simultaneously, a larger fraction of Pb ions interacted via collisions with the excited ZnS QDs and resulted in an effective energy transfer from the excited QDs to the Pb ions, therefore resulting in an obvious decrease in QD fluorescence. These insights were well supported by theoretical analysis using Stern-Volmer plots and sphere-of-action models.