Highly sensitive turn-on detection of mercury(II) in aqueous solutions and live cells with a chemosensor based on tyrosine

Design of Fluorescence Enhancing Sensor for Mercury Detection via Bamboo Cellulose-Derived Carbon Dots

Mercury contamination of the environment is extremely hazardous to human health because of its significant toxicity, especially in water. Biomass-derived fluorophores such as carbon dots (CDs) have emerged as eco-friendly and cost-effective alternative sensors that provide comparable efficacy while mitigating the environmental and economic drawbacks of conventional methods. In this work, we report the fabrication of a selective fluorescence-enhancing sensor based on sulfur-doped carbon dots (SCDs) using waste bamboo-derived cellulose and sodium thiosulfate as the soft base dopant, which actively complexes with mercury ions for detection. SCDs with an average size of 4 nm were synthesized hydrothermally, and the sulfur doping was confirmed quantitatively with an atomic percentage of 6.5%. Optical studies reveal an abnormal fluorescence enhancement of SCD in the presence of mercury due to the aggregation of carbon dots via sulfur-containing functional groups. The fabricated sensor exhibits a low detection limit of 5.16 nM, suggesting its application potential as a reliable mercury sensor. Real-time analyses carried out using tap water samples spiked with mercury and industry samples showed high efficiency for Hg(II) detection. The sensing performance was also demonstrated by using SCD-coated filter paper strips.

Development of a novel sensory material for rapid detection of mercury ions in various water sources: Solution and solid-state analysis

A xanthene propane nitrile-based sensor material was successfully prepared, and an attempt towards the preparation of polymer bead form was made for the sensitive or selective detection of mercury ions (Hg2+) in water. The sensor material in solution as well as in polymeric form showed amazing selectivity over other added metal ions with a naked eye color change, UV visible spectral and fluorescence spectral change, and a rapid and excellent color change from colorless to purple. The 1H NMR study exposed the probable binding site of the probe with the added mercury ion. In this study, the imine nitrogen and the C = O interact with the mercury ion, resulting in the ring opening of lactam with a vivid color change. The EDTA test was done to verify the reversible behavior of the probe and confirmed its reversibility by UV-visible and fluorescence spectral studies. The polymer bead made using this probe can be used as a tool for monitoring mercury ions in real time in different sources of water samples. The sensor molecule itself senses the mercury ion in its solid state by simple grinding and changes its color from pale yellow to deep purple. The sensor color change response is very rapid towards mercury detection, which is confirmed by the prepared test strip.

A highly sensitive and selective fluorescent "on-off-on" peptide-based probe for sequential detection of Hg2+ and S2- ions: Applications in living cells and zebrafish imaging

Mercury ions (Hg2+) and sulfur ions (S2-), have caused serious harm to the ecological environment and human health as two kinds of highly toxic pollutants widely used. Therefore, the visual quantitative determination of Hg2+ and S2- is of great significance in the field of environmental monitoring and medical therapy. In this study, a novel fluorescent "on-off-on" peptide-based probe DNC was designed and synthesized using dipeptide (Asn-Cys-NH2) as the raw material via solid phase peptide synthesis (SPPS) technology with Fmoc chemistry. DNC displayed high selectivity in the recognition of Hg2+, and formed non-fluorescence complex (DNC-Hg2+) through 2:1 binding mode. Notably, DNC-Hg2+ complex generated in situ was used as relay response probe for highly selective sequential detection of S2- through reversible formation-separation. DNC achieved highly sensitive detection of Hg2+ and S2- with the detection limits (LODs) of 8.4 nM and 5.5 nM, respectively. Meanwhile, DNC demonstrated feasibility for Hg2+ and S2- detections in two water samples, and the considerable recovery rate was obtained. More importantly, DNC showed excellent water solubility and low toxicity, and was successfully used for consecutive discerning Hg2+ and S2- in test strips, living cells and zebrafish larvae. As an effective visual analysis method in the field, smartphone RGB Color Picker APP realized semi-quantitative detections of Hg2+ and S2- without the need for complicated device.

Sulfonamides as Optical Chemosensors

Sulfonamides are auspicious chemosensors which are capable to bind with ionic species through various ways like complexation, charge transfer, proton transfer etc. and produce a detection signal in the form of an optical change either in visible or UV-light and for electronic as well as fluorimetric spectra. Sulfonamides have gained much attention of analytical chemists these days as these are inexpensive, robust, green in nature and some what sensitive and selective to many anionic and cationic species. Due to their promising versatility in sensing properties, these are under great consideration in forensic, environmental, analytical and biochemistry laboratories. This review narrates how sulfonamides are being used to optically sense ionic species.

The binding effects and mechanisms of dissolved organic matter (DOM) on the fate of mercury in sludge anaerobic digestion combined with thermal hydrolysis

Dissolved organic matter (DOM) plays an important role in regulating the fate of mercury (Hg), e.g., mobility, bioavailability, and toxicity. Clarifying the role of DOM in binding Hg in the treatment processes of sewage sludge is important for relieving Hg contamination risks in land applications. However, the impacts of DOM on Hg binding in sewage sludge are still unclear. In this study, we investigated the evolution of Hg and its speciation in full-scale sludge anaerobic digestion (AD) with thermal hydrolysis. The role of DOM in binding Hg(II) was further analyzed. The results showed that AD with thermal hydrolysis led to an increase in the Hg content in the sludge (from 3.72 ± 0.47 mg/kg to 10.75 ± 0.16 mg/kg) but a decrease in Hg mobility (the mercury sulfide fraction increased from 60.56 % to 79.78 %). Further adsorption experiments revealed that at equivalent DOM concentrations, DOM with a low molecular weight (MW<1 kDa) in activated sludge, DOM with a medium molecular weight (1 kDa 5 kDa) in both anaerobically digested sludge and conditioned sludge showed high binding amounts of Hg(II), with 1372.54, 535.28, 942.09 and 801.51 mg Hg/g DOM, respectively. Parallel factor analysis (PARAFAC) and fluorescence quotient (FQ) results showed that tryptophan-like and tyrosine-like substances had high binding affinities for Hg(II). Furthermore, X-ray photoelectron spectroscopy (XPS) indicated that the reduced organic sulfur contained in the DOM was potentially bound to Hg through the interactions of Hg-S and Hg-O. These results indicated that DOM may play special roles in regulating Hg speciation. The association between DOM and Hg(II), such as the significant positive correlation (p < 0.05) between the dissolution rate of Hg(II) and release of tryptophan-like substances during thermal hydrolysis, suggested the potential way for removing Hg from sludge.

A novel ratiometric peptide-based fluorescent probe for sequential detection of Hg2+ and S2- ions and its application in living cells and zebrafish imaging

A new ratiometric peptide-based fluorescent probe DWPH was designed and synthesized, comprising dansyl fluorophore as a fluorescent dye, and tripeptide backbone (Trp-Pro-His-NH2) as a recognition group. The addition of Hg2+ caused the maximum emission peak of DWPH to blue shift from 560 nm to 510 nm. DWPH exhibited large Stokes shift (230 nm), satisfactory water solubility (100 % aqueous medium), good selectivity (only Hg2+), high sensitivity (24.6 nM), rapid response (within 50 s) and strong anti-interference ability for Hg2+ detection over a wide pH range (7-11). Additionally, the complex DWPH-Hg2+ as a relay response probe could also be applied to S2- according to displacement approach. Notably, the detection limit for S2- was calculated as 23.3 nM, exhibiting that DWPH showed great potential for environmental monitoring and bioimaging. In addition, DWPH were successfully used to determine Hg2+ and S2- in living cells and zebrafish based on excellent permeability and low cytotoxicity. What's more, the gradient concentration color changes of Hg2+ and S2- were combined with the smartphone APP to obtain red-green-blue (RGB) values, thus enabling rapid semi-quantitative detection of Hg2+ and S2- without expensive instruments.

An overview on recent advances of reversible fluorescent probes and their biological applications

Due to the simplicity and low detection limit, fluorescent probes are widely used in both analytical sensing and optical imaging. Compared to conventional fluorescent probes, reversibility endows the reversible fluorescent probe outstanding advantages and special properties, making reversible fluorescent probes with capable of quantitative, repetitive or circulatory. Reversible fluorescent probes can also monitor the concentration dynamics of target analytes in real time, such as metal ions, proteins and enzymes, as well as intracellular redox processes, which have been widely applied in various fields. This review summarized the types and excellent properties of reversible fluorescent probes designed and developed in recent years. It also summarized the applications of reversible fluorescent probe in fluorescence imaging, biological testing, monitoring redox cycles, and proposed the remaining challenges and future development directions of the reversible fluorescent probe. This review provided comprehensive overview of reversible fluorescent probe, which may provide valuable references for the design and fabrication of the reversible fluorescent probe.

A novel peptide-based relay fluorescent probe with a large Stokes shift for detection of Hg2+ and S2- in 100 % aqueous medium and living cells: Visual detection via test strips and smartphone

Herein, a novel relay peptide-based fluorescent probe DGRK was synthesized via solid phase peptide synthesis (SPPS) technology. DGRK exhibited excellent water-solubility, good stability, remarkably large Stokes shift (230 nm) and high selectivity response to Hg²⁺ with a non-fluorescence complex DGRK-Hg²⁺ formation via a 1:1 binding mode. Further studies indicated that the DGRK-Hg²⁺ complex could act as a secondary probe for rapidly and sequentially detecting S^2- based on fluorescent "off-on" response, and without interference from a range of anions. The limit of detection (LOD) for Hg²⁺ and S^2- were calculated to be 33.6 nM and 60.9 nM, respectively. In addition, The reversibility of interaction of confirmed that the continuous and reversible recognition behavior of Hg²⁺ and S^2- by the probe DGRK, and could be cycled more than 5 times. In addition, DGRK could be successfully applied to the fluorescence imaging of Hg²⁺ and S^2- in two living cells based on excellent cells permeability and low cytotoxicity. Meanwhile, DGRK was successfully used to create the low-cost and portable test strips for visual detection and rapid analysis under 365 nm UV lamp, and the test strips combined with a smartphone (RGB color) was successfully applied to the semi-quantitative analysis and monitoring of dynamic changes of Hg²⁺ levels.

Peptide-based colorimetric and fluorescent dual-functional probe for sequential detection of copper(Ⅱ) and cyanide ions and its application in real water samples, test strips and living cells

A novel dual-functional peptide probe FLH based on fluorescent "on-off-on" strategy and colorimetric visualization method was designed and synthesized. This new probe exhibited highly selective and rapid detection of Cu²⁺ with significant fluorescent "turn-off" response, with a visible colorimetric change from yellow to orange. The combination ratio of FLH to Cu²⁺ (1:1) was determined using ESI-HRMS spectra and Job's plot. The fluorescent emission showed a good linear response (R² = 0.9986) with a low detection limit of 1.5 nM. In addition, the FLH-Cu²⁺ complex displayed colorimetric changes and a fluorescent "off-on" response toward CN^- over a wide pH range from 7 to 12. This detection behavior was observed within 20 s, with a limit of detection (LOD) for CN^- at 12.7 nM. Based on stability and accuracy, FLH was next developed as dual-functional test strips, and was also successfully applied to detect Cu²⁺ and CN^- in two actual water samples. More importantly, the cytotoxicity studies indicated that FLH had good biocompatibility and low toxicity, and was successfully utilized for monitoring Cu²⁺ and CN^- in living cells through fluorescence imaging.

A novel peptide-based fluorescent probe for highly selective detection of mercury (II) ions in real water samples and living cells based on aggregation-induced emission effect

A new fluorescent probe TPE-GHK was synthesized containing a tetrastyrene (TPE) derivative as fluorophore and classical tripeptide (Gly-His-Lys-NH₂) as a receptor based on the aggregation-induced emission (AIE) mechanism. TPE-GHK displayed high selectivity and rapid fluorescent "turn-on" response to Hg²⁺ among other competitive metal ions. The 2:1 complex binding mechanism of TPE-GHK toward Hg²⁺ was verified by fluorometric titration, Job's plots, and ESI-HRMS spectra. The fluorescent emission showed a good linear response in the range of 0-1.0 μM with the low detection limit of 28.6 nM. Meanwhile, TPE-GHK exhibited the excellent biocompatibility and low toxicity and was successfully applied in monitoring Hg²⁺ in living CAKI 2 cells, which demonstrated its potential application in environment and biological science. More importantly, TPE-GHK could be used to detect Hg²⁺ in two real water samples and also was successfully designed as test strips.

An Endoscope-like SERS Probe Based on the Focusing Effect of Silica Nanospheres for Tyrosine and Urea Detection in Sweat

In this work, we developed a new type of SERS probe, which was composed of glass-SiO2-Au@MBN@Ag nanoparticles (NPs) three-dimensional Surface-enhanced Raman spectroscopy (SERS) substrate. When the laser passed through the quartz glass sheet, on the one hand, the SiO2 NPs supporting the Au@MBN@Ag NPs increase the roughness of the substrate surface, resulting in a large number of hot spots among nanoparticles. On the other hand, based on the focusing effect of silicon dioxide nanospheres, the laser can better focus on the surface of nanoparticles in the inverted SERS probe, thus showing better SERS enhancement. Furthermore, the Au@MBN@Ag NPs core-shell structure was used with 4-mercaptobenzoonitrile (MBN) as an internal standard molecule, and the quantitative determination of tyrosine and urea was realized by internal standard correction method. The standard working curves of the two had good linear correlation with R2 above 0.9555. The detection limits of tyrosine and urea were in the range of 2.85 × 10-10 M~7.54 × 10-6 M, which confirms that this design can be used for quantitative and specific detection of biological molecules, demonstrating great practical significance for the research of diseases such as skin lesions and endocrine disorders.

A novel peptide-based fluorescent probe with a large stokes shift for rapid and sequential detection of Cu2+ and CN- in aqueous systems and live cells

A novel fluorescent probe (DSD) was reasonably designed and synthesized with dansyl-labeled dipeptide (Dan-Ser-Asp-NH₂). DSD featured remarkably large Stokes shift (230 nm) and perfect water solubility, and exhibited high selectivity and rapid recognition toward Cu²⁺via fluorescence quenching. The detection limit of DSD for Cu²⁺ was 2.4 nM, indicated that DSD has excellent sensitivity. In addition, the stoichiometry between DSD and Cu²⁺ were detected as 1:1 by fluorescence titration, Job's plot and ESI-HRMS data. As designed, DSD-Cu²⁺ system was able to sequentially detect CN^- according to the displacement approach with fluorescence "off-on" response, and the detection limit for CN^- was calculated to be 41.9 nM. Specifically, the response time of DSD with Cu²⁺ and CN^- was less than 40 s, which rendered it suitable for real time detection in actual water samples. In addition, with the alternate addition of Cu²⁺ and CN^-, the reversible cycles could be repeated for at least 10 times, indicated that DSD was a promising reversibility probe. DSD showed low toxicity and good biocompatibility, and was successfully applied to detect Cu²⁺ and CN^- in living cells.

Quantitative Hg2+ detection via forming three coordination complexes using a lysosome targeting quinoline - Fisher aldehyde fluorophore

This work describes (Z)-N-((Z)-2-(1,3,3-trimethylindolin-2ylidene)ethylidene)quinoline-8-amine (LYSO-QF), a high-performing and biocompatible dye comprised of quinoline and Fisher aldehyde moieties linked via an imine vinyl backbone with lysosome targeting ability that can be used to quantitatively detect the mercury ion (Hg²⁺) in biosystems and the natural environment. This is achieved by forming three different tetrameric, trimeric and dimeric complexes between Hg²⁺ and LYSO-QF with the limit of detection (LOD) of 11 nm. The complexes formed were analyzed with the aid of time-dependent density functional theory (TD-DFT) calculations. The concentration dependence of the Hg²⁺ complex fluorescence emission changes from grey-green to jade green and then to red as the different types of complex are formed. The favorable sensor properties of the LYSO-QF probe are demonstrated by monitoring different Hg²⁺ concentrations in buffer solutions, HeLa cells, zebrafish model samples and several different types of water sample. Experiments with Whatman paper strips demonstrate that the cost-effective LYSO-QF also has considerable potential for use in on-site Hg²⁺ detection with the naked eye.

Preparation of a new fluorescence nanochemosensor for Sn(II) ions by a modified nanoprecipitation method

A new dialdehyde was designed and synthesized containing naphthalene groups, and then its macrocycle was prepared with 1,4-diaminobuthan. A modified nanoprecipitation method has been reported for the preparation of the nanoparticles. In this method, to obtain nanoparticles with small particle sizes, the nucleation rate was increased with decreasing of the mixing time. The organic nanoparticles were used for turn-off fluorescence response of low concentration of Sn²⁺ ions over cations such as Cs⁺, K⁺, Na⁺, Ba²⁺, Ca²⁺, Mg²⁺, Al³⁺, Pb^2+, Zn²⁺, Cu²⁺, Ni²⁺, Co²⁺, Fe²⁺, Mn²⁺, Ag⁺, Cd²⁺, and Hg²⁺ and ions in aqueous buffer solution. The limit of detection was 5.4 nM.

Mercury Toxicity and Detection Using Chromo-Fluorogenic Chemosensors

Mercury (Hg), this non-essential heavy metal released from both industrial and natural sources entered into living bodies, and cause grievous detrimental effects to the human health and ecosystem. The monitoring of Hg2+ excessive accumulation can be beneficial to fight against the risk associated with mercury toxicity to living systems. Therefore, there is an emergent need of novel and facile analytical approaches for the monitoring of mercury levels in various environmental, industrial, and biological samples. The chromo-fluorogenic chemosensors possess the attractive analytical parameters of low-cost, enhanced detection ability with high sensitivity, simplicity, rapid on-site monitoring ability, etc. This review was narrated to summarize the mercuric ion selective chromo-fluorogenic chemosensors reported in the year 2020. The design of sensors, mechanisms, fluorophores used, analytical performance, etc. are summarized and discussed.