MPA-CdTe quantum dots as "on-off-on" sensitive fluorescence probe to detect ascorbic acid via redox reaction

Circulating Tumor Cell Phenotype Detection and Epithelial-Mesenchymal Transition Tracking Based on Dual Biomarker Co-Recognition in an Integrated PDMS Chip

Circulating tumor cells (CTCs) are widely considered as a reliable and promising class of markers in the field of liquid biopsy. As CTCs undergo epithelial-mesenchymal transition (EMT), phenotype detection of heterogeneous CTCs based on EMT markers is of great significance. In this report, an integrated analytical strategy that can simultaneously capture and differentially detect epithelial- and mesenchymal-expressed CTCs in bloods of non-small cell lung cancer (NSCLS) patients is proposed. First, a commercial biomimetic polycarbonate (PCTE) microfiltration membrane is employed as the capture interface for heterogenous CTCs. Meanwhile, differential detection of the captured CTCs is realized by preparing two distinct CdTe quantum dots (QDs) with red and green emissions, attached with EpCAM and Vimentin aptamers, respectively. For combined analysis, a polydimethylsiloxane (PDMS) chip with simple structure is designed, which integrates the membrane capture and QDs-based phenotype detection of CTCs. This chip not only implements the analysis of the number of CTCs down to 2 cells mL-1, but enables EMT process tracking according to the specific signals of the two QDs. Finally, this method is successfully applied to inspect the correlations of numbers or proportions of heterogenous CTCs in 94 NSCLS patients with disease stage and whether there is distant metastasis.

Smartphone-assisted colorimetric dual-mode sensing system based on europium-doped metal-organic frameworks for rapid on-site visual detection of Fe3+ and doxycycline

Exploring a rapid, sensitive, low-cost, in-situ intelligent monitoring multi-target fluorescence detection platform is important for food safety and environmental monitoring. A dual-mode ratiometric fluorescence sensing system integrated with a smartphone based on a luminescent metal-organic framework (NH2-MIL-53) and CdTe/Eu was developed for visual, in-situ analysis of Fe3+ and doxycycline (DOX) in this paper. Interestingly, with increasing Fe3+ concentration, the fluorescence sensing system exhibits dual-emission with CdTe QDs at 540 nM as the response signal and NH2-MIL-53 at 438 nm as the reference signal, resulting in a significant color shift of fluorescence color from blue-green to blue, with a linear range of 5--1550 nM and a detection limit of 1.08 nM. In the presence of DOX, the blue fluorescence of NH2-MIL-53 and the green fluorescence of CdTe QDs were quenched respectively by the internal filtering effect and the photoelectron transfer effect. While DOX enhances the red fluorescence of Eu3+ by the antenna effect, forming a triple-emission fluorescence sensor. The visual color of this fluorescent sensor shifted from blue green to grey to pink-white to pink to fuchsia to red as the DOX concentration increased with a detection limit of 0.11 nM. Furthermore, the developed intelligent sensing platform achieved real-time in-situ detection of Fe3+ and DOX with detection limit of 1.47 nM and 6.43 nM, respectively. The platform was applied to detection actual samples with satisfactory results, which proved a promising application for real-time on-site food safety monitoring and human health monitoring.

Using Cu2+ to regulate the emission feature of near-infrared fluorescent sensor with AIE: To detect ascorbic acid in food samples and its application in bioimaging

Conventional ascorbic acid (AA) detection methods such as chromatography, capillary electrophoresis, colorimetry, electrochemical detection, and enzymatic analysis require expensive equipment and complicated operation. Simple, rapid, and accurate AA detection is essential to inspect food quality, diagnose diseases, and assess immunity in humans. In this study, the first near-infrared fluorescence sensor DBHM with aggregation-induced emission was developed to detect AA under the involvement of Cu2+. The DBHM + Cu2+ sensor showed high sensitivity to AA with a limit of detection of 2.37 μM. The AA detection mechanism was investigated by optical studies, 1H NMR titration, high-resolution mass spectrometry, and infrared spectroscopy. AA was detected qualitatively and quantitatively by the DBHM + Cu2+ sensor in beverages, fruits, and Vitamin C tablets using a dual-mode (fluorescence and smartphone app) sensing platform. The new sensing system also showed low toxicity and excellent bioimaging in HeLa cells, C. elegans, and mice. This sensor could advance AA detection technology in the food industry and has potential bioimaging applications.

Biosensors based on DNA-functionalized CdTe quantum dots for the enhanced electrochemical detection of human-IgG

Electrochemical detection of human-IgG via biosensors is vital in clinical diagnostics, owing to their simple equipment, facile operation, high selectivity, economical, short diagnostic time, fast response, and easy miniaturization, but the need to improve sensitivity for protein detection is still a barrier limiting its wider practical applications. A hypersensitized electrochemical biosensor based on steric effects for IgG detection was developed in this work. The results indicate that IgG-modified sig-DNA attached to CdTe quantum dots (CdTe-sig-DNA) limited the ability of CdTe-sig-DNA or CdTe-sig-DNA-IgG conjugate to hybridize through the captured DNA strand (cap-DNA) immobilized on a chitosan/nitrogen-doped carbon nanocomposite (CS/N-C) modified glassy carbon electrode surface (GCE). The concentration of IgG based on CdTe concentration was detected by differential pulse anode stripping voltammetry (DPASV) on the electrode surface. The efficiency for hybridizing CdTe-sig-DNA with cap-DNA was found to be logarithmically inverse to the concentration of IgG attached. A highly sensitive and selective detection of IgG from 5 pM to 50 μM with a relatively low detection limit of 1.7 pM was achieved. Therefore, the steric hindrance effect of IgG limited the quantity of DNA that could be functionalized on CdTe QDs, significantly improving the signal, and providing a practical strategy for the clinical analysis of IgG.

Construction of continuously enhanced fluorescent sensor for detection of glutathione in normal and cancer cells

In this paper, water-soluble cysteamine (CA)-capping CdSe quantum dots (CA-CdSe) could be used as a continuous fluorescent sensor. The CA-CdSe QDs can respond to Ag⁺ with a detection limit of 54.1 nM. Interestingly, CA-CdSe quantum dots combined with Ag⁺ to generate a new nano-fluorescence sensor-Ag⁺ modified CA-CdSe QDs (Ag⁺@CA-CdSe). Ag⁺@CA-CdSe can detect glutathione (GSH) with good sensitivity and anti-interference performance. The detection limit of Ag⁺@CA-CdSe fluorescenct sensor for GSH is as low as 0.74 μM. In addition, the novel nano-fluorescent sensor Ag⁺@CA-CdSe exhibited good cell permeability and was successfully applied to detect exogenous and endogenous GSH concentrations in cells. It could distinguish cancerous and normal cells by in vitro cell fluorescence imaging.

Ultrasensitive Detection of Carcinoembryonic Antigen by Chitosan/Polythiophene/CdTe Electrochemical Biosensor

A facile method for the in situ fabrication of chitosan/polythiophene/CdTe (CS/PTh/CdTe) nanocomposite has been developed. It was then connected with anti-CEA (Ab), which was evoked for the electrochemical detection of carcinoembryonic antigen (CEA, Ag) within K₄Fe(CN)₆. The results indicate that CS/PTh/CdTe/GCE has a high selectivity for the detection of CEA with a wide linear range of 0.0001-10000 ng/mL and excellent sensitivity with a low detection limit of 40 fg/mL. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), and in situ FT-IR spectra are evoked to study the mechanism of detection of CEA via CS/PTh/CdTe/GCE. The high sensitivity of the electrochemical sensor is due to the fact that the electrochemical oxidation products of K₄Fe(CN)₆ can directly oxidize CdTe from a low energy state to a high energy state (CdTe)*, making CdTe more prone to be oxidized and facilitate electron transfer. The developed electrochemical biosensor can be used for the detection of real samples, providing a precise method for the detection of CEA with potential application in the clinical detection of tumors.

Dual-emissive ratiometric fluorescent nanosensor based on multi-nanomaterials for Ag+ determination in lake water

In this study, a sensitive ratiometric fluorescent nanosensor was constructed using a facile one-pot method by encapsulating carbon dots (CDs) and cadmium telluride quantum dots (CdTe QDs) into the pore cavities of a metal-organic framework (ZIF-8). In this nanosensor (CD/CdTe QD@ZIF-8), the fluorescence attributed to CdTe QDs was quenched by silver ions (Ag⁺), and the fluorescence intensity of CDs did not change. The introduction of ZIF-8 into the system can not only adsorb Ag⁺ but also easily separate CDs and CdTe QDs from the matrix. The developed CD/CdTe QD@ZIF-8 composite used as a ratiometric fluorescent probe exhibited high sensitivity and selectivity towards Ag⁺. The working linear range was 0.1-20 μM with a limit of detection (LOD) of 1.49 nM. Finally, the proposed nanosensor was applied to determine Ag⁺ in lake water with satisfactory results.

Tellurium-based chemical sensors

The various tellurium-based chemical sensors are described. This article focuses on four types of Tellurium sensors such as CdTe quantum dots-based sensor, Te thin films-based sensor, Te nanostructures or nanoparticles-based sensor, and TeO2-based sensor.

Methyl viologen induced fluorescence quenching of CdTe quantum dots for highly sensitive and selective "off-on" sensing of ascorbic acid through redox reaction

A turn-on fluorescent sensor based on CdTe quantum dots (QDs) is designed for highly sensitive and selective ascorbic acid (AA) detection. CdTe shows a strong emission centered at 578 nm. When assembled with poly(sodium 4-styrenesulfonate) (PSS) and methyl viologen (Mv²⁺) through electrostatic interaction, the emission is found to be effectively quenched. In the presence of AA, Mv²⁺ is reduced to Mv⁺, making the fluorescence of CdTe QDs restored. Under the optimal conditions, the proposed AA sensing method shows a linear proportional response from 0.8 µM to 20 µM, with the detecting limit as low as 50 nM. The developed method was successfully applied in the analysis of AA in human serum samples and cell lysates with satisfactory results.

A sensitive fluorescence-visualized sensor based on an InP/ZnS quantum dots-sodium rhodizonate system for monitoring fish freshness

A fluorescence-visualized sensor based on 3-mercaptopropionic acid (MPA)-capped indium phosphide/ zinc sulfide quantum dots (InP/ZnS QDs) and sodium rhodizonate (SR) was designed to sensitively monitor fish freshness. MPA-InP/ZnS QDs, which exhibit orange-red fluorescence, were synthesized by a solvothermal method. In the MPA-InP/ZnS QDs-SR system, the fluorescence of MPA-InP/ZnS QDs was quenched by SR due to the combined function of the inner filter effect (IFE) and static quenching effect (SQE) at pH = 3. When ammonia was added, the fluorescence was recovered, and the color changed from colorless to bright orange-red under UV light (365 nm). The sensing performance for volatile amine gas was studied, and the sensor demonstrated good linearity between the fluorescence intensity, the total volatile basic nitrogen (TVB-N) and the total color change (ΔE) of bighead carp stored at room temperature (25 °C) and refrigerated temperature (4 °C). The proposed sensor has potential applications in monitoring fish freshness.

Turn-on, photostable, nontoxic and specific, iron(II) sensor

The pressing need to develop a specific analytical sensor that can identify and quantify Fe(II) without a cytotoxic response was the major motivation drive in this work. The turn-on fluorescent sensor here described can successfully detect Fe(II) and discriminate this ion from other analytes that commonly act as interferents in biological media. Moreover, this reduced fluoresceinamine-based sensor has a high photostability and high dissociation constant, which is an indication that the complex obtained between reduced fluoresceinamine (RFL) and Fe(II) is highly stable. This fluorescence-based sensor has a binding mechanism of 1:1 and a positive cooperativity was found between analyte and sensor. The detection, quantification and sensitivity parameters of the sensor were determined: 21.6 ± 0.1 μM; 65.6 ± 0.1 μM and 48 ± 3 (×10⁷) μM, respectively. To evaluate a possible cytotoxicity effect an erythrocyte assay was performed and the obtained data were evaluated considering CdTe Quantum Dots (QDs) passivated with mercaptoacetic acid has experimental control. According to the resulting data RFL is not cytotoxic even when used in high concentrations, 660 mM. On the other hand QDs are quite different. Indeed it was proven that these heavy metal-based nanoparticles are responsible for 40% erytrocytes hemolysis in concentrations of 600 mM.

Research progress in synthesis and biological application of quantum dots

Quantum dots are an excellent choice for biomedical applications due to their special optical properties and quantum confinement effects. This paper reviews the research and application progress of several quantum...

Sensitive colorimetric detection of ascorbic acid based on seed mediated growth of sodium alginate reduced/stabilized gold nanoparticles

A sensitive detection strategy for ascorbic acid (AA), using sodium alginate reduced/stabilized gold nanoparticles (SA-AuNPs) as the optical probe, is reported. The SA-AuNPs were prepared by mixing gold salt and SA under stirring for 2 h at room temperature, without any further steps. The mixture was aged at 4 °C overnight, after which a faint-purple colloidal solution of SA-AuNPs was obtained. Characterization shows that the synthesis is incapable of reducing all Au³⁺ to Au°, but rather to mixture of Au°/Au⁺. The addition of AA to the SA-AuNPs probe reduced completely all Au⁺ to new AuNPs which were deposited on the pre-formed SA-AuNPs seed, leading to size increment and absorption spectra enhancement. The assay exhibited a good linearity between 12.5 and 150.0 μM AA and low limit of quantification of 11.2 μM. It was further used for AA quantitation in vitamin C injection and fruit juice with satisfactory accuracy and precision.

An electrostatic repulsion strategy for a highly selective and sensitive “switch-on” fluorescence sensor of ascorbic acid based on the cysteamine-coated CdTe quantum dots and cerium(iv)

A highly selective “switch-on” fluorescence approach for sensing of ascorbic acid (AA) based on the system of CA-CdTe QDs-Ce⁴⁺-AA was developed.