Electrogenerated chemiluminescence of Ru(bpy)32+ at MoS2 nanosheets modified electrode and its application in the sensitive detection of dopamine

Fluorescence detection of dopamine based on the peroxidase-like activity of Fe3O4-MWCNTs@Hemin

A novel Fe₃O₄-MWCNTs@Hemin nanocomposite was synthesized using hemin and Fe₃O₄ with multi-walled carbon nanotubes (MWCNTs) by one-step hydrothermal methods. The as-prepared Fe₃O₄-MWCNTs@Hemin nanocomposites exhibited excellent peroxidase-like activities in the activation of H₂O₂. The mechanisms, kinetics, and catalytic performances of Fe₃O₄-MWCNTs@Hemin were systematically studied. Fe₃O₄-MWCNTs@Hemin can oxidize dopamine (DA) to dopaquinone in the presence of H₂O₂, and the intermediate products dopaquinone can further react with β-naphthol to generate a highly fluorescent derivative at 415 nm excitation wavelength. Therefore, an innovative fluorescence platform for the detection of DA was developed. The fluorescence intensity increased linearly with DA concentration in the range 0.33 to 107 μM, with a low detection limit of 0.14 μM. Due to the excellent activity, substrate universality, fast response, high selectivity, and sensitivity of Fe₃O₄-MWCNTs@Hemin, the proposed fluorescence method was used to analyze complex biological blood samples with a satisfactory result. It demonstrated the significant potential for developing effective and dependable fluorescent analytical platforms for preserving human health.

Facile fabrication of screen-printed MoS2 electrodes for electrochemical sensing of dopamine

Molybdenum disulfide (MoS₂) screen-printed working electrodes were developed for dopamine (DA) electrochemical sensing. MoS₂ working electrodes were prepared from high viscosity screen-printable inks containing various concentrations and sizes of MoS₂ particles and ethylcellulose binder. Rheological properties of MoS₂ inks and their suitability for screen-printing were analyzed by viscosity curve, screen-printing simulation and oscillatory modulus. MoS₂ inks were screen-printed onto conductive FTO (Fluorine-doped Tin Oxide) substrates. Optical microscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDX) analysis were used to characterize the homogeneity, topography and thickness of the screen-printed MoS₂ electrodes. The electrochemical performance was assessed through differential pulse voltammetry. Results showed an extensive linear detection of dopamine from 1 µM to 300 µM (R² = 0.996, sensitivity of 5.00 × 10^-8 A μM^-1), with the best limit of detection being 246 nM. This work demonstrated the possibility of simple, low-cost and rapid preparation of high viscosity MoS₂ ink and their use to produce screen-printed FTO/MoS₂ electrodes for dopamine detection.

Detection of dopamine by a minimized electrochemical sensor using a graphene oxide molecularly imprinted polymer modified micropipette tip shaped graphite electrode

A simple and efficient electrochemical sensor based on a homemade reshaped micropipette tip carbon paste electrode is reported. Molecularly imprinted polymer membranes of graphene oxide and polypyrrole are synthesized and modified on the surface of micropipette tip carbon paste electrode. The merit of the method is evaluated under optimized conditions via differential pulse voltammetrics. The prepared sensor exhibits remarkable sensitivity toward dopamine with a linear range of 6.4 × 10−8–2 × 10−4 M, with a limit of detection as low as 1 × 10−8 M. The proposed method is applied for the determination of dopamine in urine samples by the standard addition route. A range of 1 × 10−7–1 × 10−4 M is obtained from these samples. The relative recoveries are in the range of 95.2%–104%. The proposed method has acceptable performance for the determination of dopamine in real samples with excellent sensitivity and selectivity.