A fluorescence turn-on probe for hydrogen sulfide and biothiols based on PET & TICT and its imaging in HeLa cells

The preparation of a fluorescent dual-modality nanosensor for the discrimination and determination of biothiols in real samples and its practical detection kit

Biothiols widely exist in living organisms and have a crucial function of maintaining redox balance in the human body. It is vital yet difficult to develop probes that can simultaneously detect and distinguish biothiols. In this study, a highly sensitive dual-modality nanosensor, NBD-Nap@NCC, was developed for the discrimination and determination of biothiols in real samples, and its practical application was elucidated based on RGB analysis using a smartphone. The sensitive nanosensor was successfully prepared through the surface modification of nanocrystalline cellulose (NCC), combining NBD and naphthalene fluorophores. Owing to the high electron-withdrawing behavior of the NBD group, which led to a PET mechanism between the fluorophores, the prepared NBD-Nap@NCC nanosensor had a very weak fluorescence response. However, after treatment with Hcy or Cys, NBD-Nap@NCC quickly provided remarkable and different rates of fluorescence "turn-on" responses in both blue and green channels, which was attributed to naphthalene and NBD fluorophores as a result of the inhibition of the PET mechanism. However, after treatment with GSH, only a significant blue-channel emission, which was attributed to the naphthalene fluorophore was obtained, indicating the inhibition of the PET mechanism. Furthermore, the NCC platform demonstrated improved sensitivity and selectivity because of the increased surface area and higher number of binding sites due to modification of the NBD group on the surface. The detection limit ranged from 0.910 to 1.150 μmol L-1 for biothiols with a large dynamic response range. The accuracy of the sensor in determining the concentrations of Hcy, Cys, and GSH in real samples was evaluated via HPLC and spike/recovery analysis. Additionally, paper-based analysis kits were fabricated for the practical detection of biothiols based on RGB changes using a smartphone application.

Difunctional Fluorescent Probes for Iron and Hydrogen Sulfide Detection Based on Diphenyl Derivative

In order to better monitor the content of Fe3+ and H2S in the biological environment, two new fluorescent probes were designed and synthesized. With the addition of Fe3+, the strong fluorescence emission of two probes was significantly quenched due to the paramagnetic effect of Fe3+. With the further addition of S2-, the fluorescence intensity was quickly restored. Two probes showed high selectivity and strong sensitivity for the detection of Fe3+ and S2-, and the fluorescence intensity "ON-OFF-ON" was accompanied with the interaction process. At the same time, two probes displayed good anti-interference ability which was not interfered by the existence of other ions. In addition, two probes illustrated fast response time to Fe3+, S2- and small cytotoxicity to cells. Therefore, two probes can provide a potential ideal tool for detecting Fe3+ and H2S in organisms and the environment.

Activity-Based Fluorescent Probes for Hydrogen Sulfide and Related Reactive Sulfur Species

Hydrogen sulfide (H2S) is not only a well-established toxic gas but also an important small molecule bioregulator in all kingdoms of life. In contemporary biology, H2S is often classified as a "gasotransmitter," meaning that it is an endogenously produced membrane permeable gas that carries out essential cellular processes. Fluorescent probes for H2S and related reactive sulfur species (RSS) detection provide an important cornerstone for investigating the multifaceted roles of these important small molecules in complex biological systems. A now common approach to develop such tools is to develop "activity-based probes" that couple a specific H2S-mediated chemical reaction to a fluorescent output. This Review covers the different types of such probes and also highlights the chemical mechanisms by which each probe type is activated by specific RSS. Common examples include reduction of oxidized nitrogen motifs, disulfide exchange, electrophilic reactions, metal precipitation, and metal coordination. In addition, we also outline complementary activity-based probes for imaging reductant-labile and sulfane sulfur species, including persulfides and polysulfides. For probes highlighted in this Review, we focus on small molecule systems with demonstrated compatibility in cellular systems or related applications. Building from breadth of reported activity-based strategies and application, we also highlight key unmet challenges and future opportunities for advancing activity-based probes for H2S and related RSS.

Small Molecule Optical Probes for Detection of H2S in Water Samples: A Review

Hydrogen sulfide (H2S) is closely linked to not only environmental hazards, but also it affects human health due to its toxic nature and the exposure risks associated with several occupational settings. Therefore, detection of this pollutant in water sources has garnered immense importance in the analytical research arena. Several research groups have devoted great efforts to explore the selective as well as sensitive methods to detect H2S concentrations in water. Recent studies describe different strategies for sensing this ubiquitous gas in real-life water samples. Though many of the designed and developed H2S detection approaches based on the use of organic small molecules facilitate qualitative/quantitative detection of the toxic contaminant in water, optical detection has been acknowledged as one of the best, attributed to the simple, highly sensitive, selective, and good repeatability features of the technique. Therefore, this review is an attempt to offer a general perspective of easy-to-use and fast response optical detection techniques for H2S, fluorimetry and colorimetry, over a wide variety of other instrumental platforms. The review affords a concise summary of the various design strategies adopted by various researchers in constructing small organic molecules as H2S sensors and offers insight into their mechanistic pathways. Moreover, it collates the salient aspects of optical detection techniques and highlights the future scope for prospective exploration in this field based on the limitations of the existing H2S probes.

A chalcone-based ESIPT and AIE fluorophore for β-gal imaging in living cells

β-Galactosidase (β-gal), which is responsible for the hydrolysis of the glycosidic bond of lactose to galactose, has been recognized as an important biomarker of cell or organism status, especially cell senescence and primary ovarian cancer. Extensive efforts have been devoted to develop probes for detecting and visualizing β-gal in cells. Herein, a fluorescent probe gal-HCA which possesses both excited-state intramolecular proton transfer (ESIPT) and aggregation-induced emission (AIE) properties was prepared to monitor β-gal in living cells. The probe consists of 2-hydroxy-4'-dimethylamino-chalcone (HCA) capped with a D-galactose group. The cleavage of the glycosidic bond in gal-HCA triggered by β-gal releases HCA, which results in a significant bathochromic shift in fluorescence from 532 to 615 nm. The probe exhibited high selectivity and sensitivity toward β-gal with a detection limit as low as 0.0122 U mL-1. The confocal imaging investigation demonstrated the potential of gal-HCA in monitoring the endocellular overexpressed β-gal in senescent cells and ovarian cancer cells. This study provides a straightforward approach for the development of fluorescent probes to monitor β-gal and detection of β-gal-associated diseases.

New Rhodamine-based sensor for high-sensitivity fluorescence tracking of Cys and simultaneously colorimetric detection of H2S

Sulfhydryl-containing compounds including cysteine (Cys), homocysteine (Hcy), glutathione (GSH) and hydrogen sulfide (H2S) are involved in many physiological processes. The development of single-molecule optical sensor for the distinguish detection of these bio-thiols is a critical and challenging effort. In this work, we designed a one-step synthesis of the Rhodamine-based sensor FR for specific fluorescent response of Cys and simultaneously colorimetric detection of H2S, in which the aldehyde and fluorine groups act as response sites. Sensor FR displays significant fluorescence enhancement at 565 nm toward Cys with high selectivity and low detection limits (49 nM) due to the low background fluorescent signal of the spirocyclic closed-state in Rhodamine structure. Meantime, after treatment of H2S, the color of the sensor changes significantly from colorless to blue-purple, which can be used as a visual colorimetric method to detect H2S. These response mechanisms were systematically characterized by 1H NMR and Mass spectrometry. Finally, sensor FR could be used to monitor exogenous and endogenous of intracellular Cys changes.

An aggregation induced emission chalcone fluorescent probe with large Stokes shift for biothiols detection

The homeostasis of biothiols is closely related to the health of organisms. In view of the important role of biothiols, a fluorescent probe (7HIN-D) for the detection of intracellular biothiols was developed based on a simple chalcone fluorophore 7HIN with "ESIPT + AIE" characteristics. The probe 7HIN-D was obtained by introducing a biothiols specific DNBS (2,4-dinitrobenzenesulfonyl) unit as a fluorescence quencher to the fluorophore 7HIN. The nucleophilic substitution reaction between biothiols and probe 7HIN-D will release the DNBS unit and the fluorophore 7HIN, which exhibits a "turn on" AIE fluorescence with a large Stokes shift of 113 nm. The probe 7HIN-D displays high sensitivity and good selectivity to biothiols, and the detection limits value of probe 7HIN-D for GSH, Cys and Hcy were 0.384 μmol/L, 0.471 μmol/L and 0.638 μmol/L, respectively. In addition, the probe has been successfully used for fluorescence detection of endogenous biothiols in living cells due to its excellent performance, good biocompatibility and low cytotoxicity.

HPLC Study of Product Formed in the Reaction of NBD-Derived Fluorescent Probe with Hydrogen Sulfide, Cysteine, N-acetylcysteine, and Glutathione

Hydrogen sulfide (H₂S) and its bioderivatives analogs, such as L-cysteine (L-Cys) and glutathione (GSH), are ubiquitous biological thiols in the physiological and pathological processes of living systems. Their aberrant concentration levels are associated with many diseases. Although several NBD-based fluorescence probes have been developed to detect biological thiols, the HPLC-detection of H₂S, GSH, L-Cys, and N-acetylcysteine-specific products has not been described. Herein, a novel NBD-derived pro-coumarin probe has been synthesized and used to develop a new strategy for the triple mode detection of H₂S and such thiols as GSH, L-Cys, and NAC. Hydrogen sulfide and those biothiols at physiological pH release fluorescent coumarin from the probe and cause a significant fluorescence enhancement at 473 nm. The appropriate NBD-derived product for H₂S, L-Cys, GSH, and NAC has a different color and retention time that allows distinguishing these biological thiols meaning the probe has a great possibility in the biological application. Fluorescent imaging combined with colorimetric and HPLC detection of H₂S/biothiol-specific product(s) brings a potential tool for confirming the presence of biological thiols and determining concentrations in various aqueous biological samples.

Development and application of a novel β-diketone difluoroboron-derivatized fluorescent probe for sensitively detecting H2S

Hydrogen sulfide{Wang, 2018 #4}{Wang, 2018 #4}{Zhong, 2020 #9} (H₂S) is a poisonous and harmful gas molecule. Certain concentrations of H₂S{Liu, 2021 #8} can irritate the eyes, respiratory system, and central nervous system of human beings. Therefore, it was an urgent need for highly selective, anti-interference, and sensitive detection technology for hydrogen sulfide. Herein, a novel "turn-on" fluorescent probe 1-(2-(6,6-dimethylbicyclo[3.1.1]heptyl-2-ene-2-yl))-9-(4-(dimethylaminophenyl))non-1,6,8-triene-3,5-dione boron difluoride complex (MCBF) was designed and synthesized for detecting H₂S sensitively. MCBF displayed a remarkable fluorescence enhancement response to H₂S with a large Stokes shift of 220 nm. The sensitive detection of MCBF towards H₂S owned good selectivity, fast response time (6 min), excellent photostability, and low detection limit (0.44 μM). The sensing mechanism of MCBF towards H₂S was well confirmed by HRMS analysis, ¹H NMR titration, and density functional theory (DFT) calculations. What's more, probe MCBF was successfully applied to detect the contained H₂S in red wine, which showed the potential practicability of MCBF in real samples analysis.

A super sensitive fluorescent probe for imaging endogenous hydrogen sulfide in living cells

Hydrogen sulfide (H₂S) that typically performs biphasic biological functions in organisms plays an opposite role at the concentrations above or below normal level of the organism. Therefore, it is significant to develop a fluorescent probe with high sensitivity and selectivity and rapid response for the detection of hydrogen sulfide in vivo. The work describes the design and biological applications of a novel turn-on fluorescence probe SS-N₃ in which the quinoline quaternary ammonium salt derivative is introduced as the fluorescent skeleton and azide is employed as the detection group of H₂S. The probe SS-N₃ shows strong fluorescence at 610 nm, as the azide group is reduced to an amino group by H₂S. The probe SS-N₃ shows high selectivity to H₂S than other anions and some biological mercaptans, and strong anti-interference capacity. In addition, the probe SS-N₃ exhibits little cytotoxicity, improved photostability and large Stokes shift (135 nm), as well as can be effectively used as an indicator of H₂S level in living cells.

Increase of Fluorescence of Humic-Like Substances in Interaction with Cd(II): a Photoinduced Charge Transfer Approach

Described is the enhancement of fluorescence intensity due to the interaction of a humic-like substance (HLS 1%) extracted from process water (PW) and Cd(II) ions in aqueous solution. Using Canonical Polyadic/Parallel Factor Analysis (CP/PARAFAC), two main components were seen that contributed to fluorescence, the first one increased it and the second one kept it constant in both static and dynamic fluorescence studies. Two-dimensional FTIR analysis indicated that the interaction of HLS 1% and Cd(II) ions occurred in the following order of affinity with the groups: C-O bonds in polysaccharides > C-O bonds in carboxylic acid. The results obtained suggest that the increase in fluorescence intensity and lifetime suggest a photoinduced charge transfer (PCT) between Cd(II) ions and carboxylic acid groups present in HLS 1%.

Application of a fluorescent H2S probe based on excited-state intramolecular proton transfer for detecting latent mechanism of H2S-induced MCF-7 apoptosis

Background: H₂S is the third gas transmitter affecting the growth, reproduction and survival of cancer cells. However, the H₂S anticancer and antitumor mechanism still needs to be further studied. Methods: Here, FHS-1 was synthesized utilizing excited-state intramolecular proton transfer to detect H₂S in MCF-7 cells, and investigated the effects of varying concentrations NaHS on apoptosis. Results: The study found that FHS-1 detects H₂S levels with high selectivity and pH stability and that H₂S may regulate apoptosis in MCF-7 cells through the p53/mTOR/STAT3 pathway. Conclusion: Researching the influence of H₂S on apoptosis can serve as a theoretical foundation for future research into H₂S-related anticancer medicines, and the H₂S probe can be used as an effective cancer screening tool.

Development of a NIR fluorescent probe for highly selective and sensitive detection of cysteine in living cells and in vivo

Cysteine (Cys) plays important physiological roles in the human body, and abnormal Cys concentrations can cause a variety of diseases. Thus, detecting Cys with high selectivity and sensitivity in vivo is important. Near-infrared (NIR) fluorescent probes are widely employed in biological detection because of their excellent optical properties such as minimal damage to biological samples, low background interference and high signal-to-noise ratio. However, few NIR fluorescent probes that can detect Cys over homocysteine (Hcy) and glutathione (GSH) have been reported because of their similar reactivity and structure. In this work, a highly water-soluble NIR probe (CYNA) for detecting Cys whose structure is similar to that of indocyanine green and is based on cyanine skeleton was synthesized and via aromatic nucleophilic substitution-rearrangement (SNAr-rearrangement) to specific recognize the cysteine. The probe showed high selectivity toward Cys and superior biosecurity, excellent biocompatibility and prolonged dynamic imaging. It also has long fluorescence emission wavelength (820 nm), low detection limit (14 nM) and was successfully applied for visualizing Cys in living cells and mice, which has great promise for applications in noninvasive vivo biological imaging and detection.

Theoretical study on the sensing mechanism of chalcone-based fluorescence probe for detecting hydrogen sulfide and biothiols

The single fluorescence phenomenon of Comp2 experimentally is explained by the Boltzmann distribution. Pr1 has three distorted dihedral angles under photo-excitation.

A highly sensitive ratiometric fluorescent probe for imaging endogenous hydrogen sulfide in cells

A novel fluorescent probe (QL-N3) has high potential to detect the concentration of endogenous hydrogen sulfide in cells.