A carbon dot-based fluorometric probe for oxytetracycline detection utilizing a Förster resonance energy transfer mechanism

Construction of CDs@β-CD@CCM ratiometric fluorescence probe for FRET-based ClO--sensing

β-Cyclodextrin (β-CD)-functionalized carbon quantum dots (CDs) loaded with curcumin (CCM) were used for ClO-sensing with high sensitivity and selectivity. This fluorescence resonance energy transfer (FRET)-based sensor was created through attaching CCM to the CDs via β-CD linker. CCM could get into the interior of β-CD triggering the FRET from CDs to CCM, providing an 'off' state of the CDs. However, the effect of FRET was weakened by the ClO-, because the o-methoxyphenol structure from CCM was oxidized to be benzoquinone. The fluorescence intensity of CDs@β-CD@CCM at 440 nm can be heightened and 520 nm from CCM can decrease along with the increased ClO-. Therefore, a ratiometric fluorescence probe for ClO-sensing is successfully constructed. It conforms to a polynomial curve equation which is I440/I520= -0.0268 + 0.0315 CClO-+ 0.0055[CClO-]2(R2= 0.9958) between 0 and 18.4μM ClO-. Furthermore, we also obtain excellent results using this spectrophotometric method for ClO--sensing in pure water and commercial disinfectants, which afford potential in the environment monitoring area. We expect this sensing platform could be helpful in other analogous probes in relevant fields.

A Lanthanide-Incorporated Phospho(III)tungstate Aggregate Constructed from [HPIIIW8O31]10- and [W11O39]12- Building Blocks and Its Nanocomposite with CdS for Ultrasensitive Photoelectrochemical Detection of Oxytetracycline

A novel tartronic acid decorated hexa-CeIII-incorporated phospho(III)tungstate aggregate (C4H12NO)6Na18H2[(HPW8O31)2[W11O39]2(H2TAD)4(H2O)4W4Ce6H2P2O14]·84H2O (1, H3TAD = tartronic acid) was synthesized by a one-step assembly strategy. Its main skeleton is constructed from two [W11O39]12- fragments, two [HPIIIW8O31]10- segments and one H2TAD--ornamented dodecanuclear heterometallic [W4Ce6H2PIII2O14(H2TAD)4(H2O)4]18+ cluster. In the structure, the [HPIIIO3]2- groups not only work as the heteroatom template to induce the formation of lacunary [HPIIIW8O31]10- segments but also function as the connector to bridge Ce3+ cations. With the help of a reaction strategy of combining ultrasonication treatment with the continuous ion layer adsorption method, the 1/CdS composite was constructed and exhibits prominent photoelectrochemical activity. The 1/CdS composite was used as a photoelectrochemical sensor for oxytetracycline detection at 0 V (vs Ag/AgCl), which displays excellent properties with quick response and low limit of detection (0.042 nM). This work can provide some helpful references in the construction of novel PIII-induced polyoxometalates consisting of different building blocks and can extend the applications of polyoxometalate-based nanocomposites into photoelectrochemical detection for antibiotics as well as biomolecules.

Construction of fluorescent sensor array with nitrogen-doped carbon dots for sensing Sudan Orange G and identification of various azo compounds

In this study, nitrogen-doped carbon dots (N-CDs) were facilely fabricated by one-pot hydrothermal method with levulinic acid and triethanolamine. A fluorescent sensor array was established for identifying azo compounds including Sudan Orange G (SOG), p-diaminoazobenzene, p-aminoazobenzene, azobenzene and quantitative detection of SOG. Experimental results revealed that azo compounds could quench the fluorescent intensity of N-CDs. Owing to various azo compounds showing different affinities to N-CDs, the sensor array exhibited different fluorescence quenching changes, which were further analyzed with principal component analysis to discriminate azo compounds. The sensor array was able to differentiate and recognize diverse concentrations of azo compounds from 0.25 to 2 mg/L. Simultaneously, a variety of factors affecting the detection of SOG were optimized. Under the optimized conditions, the sensor showed excellent stability and sensitivity. The sensor possessed marvelous linearity in the range of 0.1-1 mg/L and 1-4 mg/L and the detection limit was 27.82 μg/L. Spiked recoveries of 90.8-98.2 % were attained at spiked levels of 0.2 mg/L and 1 mg/L, demonstrating that the constructed fluorescence sensor was dependable and feasible for sensing SOG in environmental water samples.

High enrichment and sensitive measurement of oxytetracycline in tea drinks by thermosensitive magnetic molecular imprinting based magnetic solid phase extraction coupled with boron doped carbon dots

As a typical kind of new pollutants, there are still some challenges in the rapid detection of antibiotics. In this work, a sensitive fluorescent probe based on boron-doped carbon dots (B-CDs) in combination with thermo-responsive magnetic molecularly imprinted polymers (T-MMIPs) was constructed for the detection of oxytetracycline (OTC) in tea drinks. T-MMIPs were designed, fabricated and employed to enrich OTC at trace level from tea drinks, and B-CDs were utilized as the fluorescent probe to detect the concentration of OTC. The proposed method exhibited good linear relationship with OTC concentration from 0.2 to 60 μg L-1 and the limit of detection was 0.1 μg L-1. The established method has been successfully validated with tea beverages. Present work was the first attempt application of T-MMIPs in combination with CDs in detection of OTC, and demonstrated that the proposed method endowed the detection of OTC with high selectivity, sensitivity, reliability and wide application prospect, meanwhile offered a new strategy for the method establishment of rapid and sensitive detection of trace antibiotics in food and other matrices.

Biomass-derived carbon dots as emerging visual platforms for fluorescent sensing

Biomass-derived carbon dots (CDs) are non-toxic and fluorescently stable, making them suitable for extensive application in fluorescence sensing. The use of cheap and renewable materials not only improves the utilization rate of waste resources, but it is also drawing increasing attention to and interest in the production of biomass-derived CDs. Visual fluorescence detection based on CDs is the focus of current research. This method offers high sensitivity and accuracy and can be used for rapid and accurate determination under complex conditions. This paper describes the biomass precursors of CDs, including plants, animal remains and microorganisms. The factors affecting the use of CDs as fluorescent probes are also discussed, and a brief overview of enhancements made to the preparation process of CDs is provided. In addition, the application prospects and challenges related to biomass-derived CDs are demonstrated.

Electrochemical detection of oxytetracycline employing sugarcane carbon modified graphite electrode

The present study used CeO2-Co3O4 quantum dots@porous carbon/multiwalled carbon nanotube (CeO2-Co3O4 QDs@PC/MWCNT/GE) composites to modify graphite electrodes to fabricate high-sensitivity electrochemical sensors to detect the presence of oxytetracycline (OTC). The quantum dots were made from waste sugarcane bagasse. The electrochemical analysis demonstrated the superior electrochemical performance of CeO2-Co3O4 QDs@PC/MWCNT/GE, with a peak current density of 1.276 mA/cm2. Electrochemical impedance spectroscopy (EIS) revealed lower impedance values for CeO2-Co3O4 QDs@PC/MWCNT/GE compared to other electrodes, indicating enhanced conductivity. The modified electrode exhibited an enlarged electrochemically active area, with values of 0.602 cm2, almost seven times that of the bare graphite electrode (0.079 cm2). The results showed that the CeO2-Co3O4 QDs@PC/MWCNT/GE had excellent performance for OTC detection, and its linear calibration range was 1.007 × 10-8 to 2.04 × 10-7 M (i.e., 0.005-0.1 ppm) and 1.007 × 10-6 to 1.209 × 10-4 M (i.e., 0.5-60 ppm). The limit of detection and limit of quantification were 1.23 nM (0.61 ppb) and 4.09 nM (2.03 ppb) (S/N = 3), respectively. The electrode demonstrated long-term stability for up to 7 weeks. This method provides a new way to prepare electrochemical sensors for OTC detection.

Understanding Antibiotic Detection with Fluorescence Quantum Dots: A Review

The utilization of fluorescent quantum dots (FL QDs) has gained significant traction in the realm of antibiotic detection, owing to their exceptional FL properties and versatility. Various types of QDs have been tailored to exhibit superior FL characteristics, employing diverse capping agents such as metals, surfactants, polymers, and biomass to protect and stabilize their surfaces. In their evolution, FL QDs have demonstrated both "turn-off" and "turn-on" mechanisms in response to the presence of analytes, offering promising avenues for biosensing applications. This review article provides a comprehensive overview of the recent advancements in antibiotic detection utilizing FL QDs as biosensors. It encompasses an extensive examination of different types of FL QDs, including carbon, metal, and core-shell QDs, deployed for the detection of antibiotics. Furthermore, the synthesis methods employed for the fabrication of various FL QDs are elucidated, shedding light on the diverse approaches adopted in their preparation. Moreover, this review delves into the intricate sensing mechanisms underlying FL QDs-based antibiotic detection. Various mechanisms, such as photoinduced electron transfer, electron transfer, charge transfer, Forster resonance energy transfer, static quenching, dynamic quenching, inner filter effect, hydrogen bonding, and aggregation-induced emission, are discussed in detail. These mechanisms provide a robust scientific rationale for the detection of antibiotics using FL QDs, showcasing their potential for sensitive and selective sensing applications. Finally, the review addresses current challenges and offers perspectives on the future improvement of FL QDs in sensing applications. Insights into overcoming existing limitations and harnessing emerging technologies are provided, charting a course for the continued advancement of FL QDs-based biosensing platforms in the field of antibiotic detection.

A fluorescent terbium-metal-organic framework material for high-sensitivity detection of vomitoxin and oxytetracycline hydrochloride in water

A unique luminescent lanthanide metal-organic framework (LnMOF)-based fluorescence detection platform was utilized to achieve sensitive detection of vomitoxin (VT) and oxytetracycline hydrochloride (OTC-HCL) without the use of antibodies or biomolecular modifications. The sensor had a fluorescence quenching constant of 9.74 × 106 M-1 and a low detection limit of 0.68 nM for vomitoxin. Notably, this is the first example of a Tb-MOF sensor for fluorescence detection of vomitoxin. We further investigated its response to two mycotoxins, aflatoxin B1 and ochratoxin A, and found that their Stern-Volmer fluorescence quenching constants were lower than those of VT. In addition, the fluorescence sensor realized sensitive detection of OTC-HCL with a detection limit of 0.039 μM. In conclusion, the method has great potential as a sensitive and simple technique to detect VT and OTC-HCL in water.

Synthesis of molecularly imprinted polymers based on nitrogen-doped carbon dots for specific detection of chlortetracycline by reversed phase microemulsion method

Among the tetracycline antibiotics, chlortetracycline (CTC) is the most frequently used antibiotic except for tetracycline (TC) for enhancing the ability of the organism to fight bacterial infections. The poor metabolism and degradability of CTC can cause serious health effects. Most studies have focused on the detection and analysis of TC, and research on CTC is relatively scarce. This is because the structures of CTC and TC and oxytetracycline (OTC) are extremely similar, and even indistinguishable. In this study, CTC was used as a template molecule and a molecularly imprinted layer was coated on the surface of highly fluorescent N-CDs using a reversed-phase microemulsion method to form N-CDs@MIPs. It was possible to specifically identify CTC without the influence of TC and OTC, which are extremely similar in structure. By comparing with the non-imprinted polymer (N-CDs@NIPs), it exhibited high sensitivity and selectivity with an imprinting factor of 2.02. And it was used in the determination of CTC in milk with recoveries and relative standard deviations of 96.7%-109.8% and 0.64%-3.27%, respectively, with high accuracy and precision. The specificity of the measurement is excellent compared with other assays, and it is a valid and reliable assay.

Construction of CdTe@γ-CD@RBD nanoprobe for Fe3+-sensing based on FRET mechanism in human serum

A Fe³⁺ optical sensor (CdTe@γ-CD@RBD) has been developed by using gamma-cyclodextrin (γ-CD) as a bridge to link CdTe quantum dots (QDs) and a Rhodamine B derivative (RBD). The RBD molecule can enter the cavity of the γ-CD anchored onto the surfaces of the QDs. In the presence of Fe³⁺, the fluorescence resonance energy transfer (FRET) process from QDs to RBD will be initiated, rendering the nanoprobe to display a response to Fe³⁺. The degree of fluorescence quenching presented a satisfactory linearity between 10 and 60 μΜ with the incremental concentrations of Fe³⁺, and the calculated limit of detection was 2.51 μΜ. Through sample pretreatment procedures, the probe has been used in the determination of Fe³⁺ in human serum. The average recoveries in the spiking levels are ranged from 98.60 % to 107.20 % with a relative standard deviation of around 1.43 %-2.96 %. This finding leads to a method for fluorescent detection of Fe³⁺ with high sensitivity and exceptional selectivity. We believe that this study can give a new insight into the rational design and application of FRET-based nanoprobes.

Excitation-depended fluorescence emission of boron-doped graphene quantum dot as an optical probe for detection of oxytetracycline in food and information encryption patterns

The boron-doped graphene quantum dot (HSE-GQD-B) was prepared by thermal pyrolysis of the mixture of citric acid, histidine, serine and ethylenediamine and boric acid. The resulting HSE-GQD-B is composed of tiny graphene sheets with an average sheet size of 4.2 ± 0.16 nm and exhibits an excitation-depended fluorescence emission behavior. The HSE-GQD-B produces the strongest blue fluorescence of 450 nm wavelength under the excitation of 365-nm ultraviolet light and the strongest yellow fluorescence of 550-nm wavelength under the excitation of 470-nm visible light. The interaction of HSE-GQD-B with oxytetracycline molecule induces a sensitive blue fluorescence quenching process. Based on this characteristic, a fluorescence method was established for optical detection of oxytetracycline. The analytical method offers a better sensitivity, selectivity, and repeatability compared with previously reported methods. The detection of oxytetracycline attains a wide linear range of 0.02-50 μM and a detection limit of 0.0067 μM. It has been successfully applied to fluorescence detection of oxytetracycline in food samples. In addition, the HSE-GQD-B was also used as a multicolor fluorescence probe for information encryption patterns.

Nanomaterial-based fluorescent biosensors for the detection of antibiotics in foodstuffs: A review

Antibiotics are widely used as bacteriostatic or bactericidal agents against various microbial infections in humans and animals. The excessive use of antibiotics has led to an accumulation of their residues in food products, which ultimately poses a threat to human health. In light of the shortcomings of conventional methods for antibiotic detection (primarily cost, proficiency, and time-consuming procedures), the development of robust, accurate, on-site, and sensitive technologies for antibiotic detection in foodstuffs is important. Nanomaterials with amazing optical properties are promising materials for developing the next generation of fluorescent sensors. In this article, advances in detecting antibiotics in food products are discussed with respect to their sensing applications, with a focus on fluorescent nanomaterials such as metallic nanoparticles, upconversion nanoparticles, quantum dots, carbon-based nanomaterials, and metal-organic frameworks. Furthermore, their performance is evaluated to promote the continuation of technical advances.

A Turn-Off Fluorescent Biomimetic Sensor Based on a Molecularly Imprinted Polymer-Coated Amino-Functionalized Zirconium (IV) Metal-Organic Framework for the Ultrasensitive and Selective Detection of Trace Oxytetracycline in Milk

Developing sensitive and effective methods to monitor oxytetracycline residues in food is of great significance for maintaining public health. Herein, a fluorescent sensor (NH₂-UIO-66 (Zr)@MIP) based on a molecularly imprinted polymer-coated amino-functionalized zirconium (IV) metal-organic framework was successfully constructed and first used for the ultrasensitive determination of oxytetracycline. NH₂-UIO-66 (Zr), with a maximum emission wavelength of 455 nm under 350 nm excitation, was prepared using a microwave-assisted heating method. The NH₂-UIO-66 (Zr)@MIP sensor with specific recognition sites for oxytetracycline was then acquired by modifying a molecularly imprinted polymer on the surface of NH₂-UIO-66 (Zr). The introduction of NH₂-UIO-66 (Zr) as both a signal tag and supporter can strengthen the sensitivity of the fluorescence sensor. Thanks to the combination of the unique characteristics of the molecularly imprinted polymer and NH₂-UIO-66 (Zr), the prepared sensor not only exhibited a sensitive fluorescence response, specific identification capabilities and a high selectivity for oxytetracycline, but also showed good fluorescence stability, satisfactory precision and reproducibility. The fabricated sensor displayed a fluorescent linear quenching in the OTC concentration range of 0.05-40 μg mL^-1, with a detection limit of 0.012 μg mL^-1. More importantly, the fluorescence sensor was finally applied for the detection of oxytetracycline in milk, and the results were comparable to those obtained using the HPLC approach. Hence, the NH₂-UIO-66 (Zr)@MIP sensor possesses great application potential for the accurate evaluation of trace oxytetracycline in dairy products.

Green and rapid synthesis of biomass carbon dot-based fluorescence sensing for the sensitive determination of oxytetracycline

Eco-friendly biomass carbon dots (CDs) with blue fluorescence emission were rapidly synthesized by a microwave method. Based on the inner filter effect (IFE) between oxytetracycline (OTC) and CDs, the fluorescence of CDs could be selectively quenched by OTC. Therefore, a simple and time-saving fluorescence sensing system for the detection of OTC was established. Under optimal experimental conditions, the concentration of OTC showed a good linear relationship with fluorescence quenching values (ΔF) in the range of 4.0-100.0 μmol L^-1, a corresponding correlation coefficient (r) of 0.9975, and a detection limit of 0.12 μmol L^-1. The method has the advantages of low cost, time-saving, and green synthesis that could be used for the determination of OTC. Moreover, possessing high sensitivity and specificity, this fluorescence sensing method was successfully applied for detecting OTC in milk, indicating its potential applications in food safety.

An Overview on Carbon Quantum Dots Optical and Chemical Features

Carbon quantum dots are the materials of a new era with astonishing properties such as high photoluminescence, chemical tuneability and high biocompatibility. Since their discovery, carbon quantum dots have been described as nanometric high-fluorescent carbon nanoparticles, but this definition has become weaker year after year. Nowadays, the classification and the physical explanation of carbon quantum dots optical properties and their chemical structure remain matter of debate. In this review, we provide a clear discussion on these points, providing a starting point for the rationalization of their classification and a comprehensive view on the optical and chemical features of carbon quantum dots.

Fluorescent folic acid-capped copper nanoclusters for the determination of rifampicin based on inner filter effect

Development of excellent sensors to determine trace concentrations of rifampicin is of intense importance for medicine analysis and human health. Herein, a facile and green fluorescent probe was established for the determination of rifampicin by using folic acid protected copper nanoclusters (FA-Cu NCs). Many characterization methods were applied for the analysis of the as-prepared FA-Cu NCs including UV-visible absorption spectra, fluorescence spectra, Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), fluorescence lifetime and X-ray photoelectron spectroscopy (XPS). The TEM image suggested that the as-prepared FA-Cu NCs were highly dispersed. The as-synthesized FA-Cu NCs emerged blue fluorescence under UV light and demonstrated maximum emission wavelength at 446 nm under the maximum excitation wavelength of 358 nm. After the addition of rifampicin, the FL intensities of FA-Cu NCs were uncommonly quenched. The related experimental data intimated that the quenching mechanisms were assumed to the inner filter effect (IFE) and static quenching. The as-proposed probe platform displayed an obvious linear relationship with rifampicin concentrations varying from 0.5 to 100 µM, and the corresponding detection limit (LOD) was 0.073 µM (S/N = 3). Finally, the as-established detection platform was successfully employed to analyze trace concentrations of rifampicin in real samples.

A Highly Sensitive and Selective Nano-Fluorescent Probe for Ratiometric and Visual Detection of Oxytetracycline Benefiting from Dual Roles of Nitrogen-Doped Carbon Dots

The specific detection of oxytetracycline (OTC) residues is significant for food safety and environmental monitoring. However, rapid specific determination of OTC from various tetracyclines is still challenging due to their similar chemical structures. Here, nitrogen-doped carbon dots (NCDs) with excitation and pH-dependent optical properties and a high-fluorescence quantum yield were successfully synthesized, which were directly employed to fabricate a dual-response fluorescence probe by self-assembly with Eu³⁺ (NCDs/Eu³⁺) for the ratiometric determination of OTC. The addition of OTC into the probe greatly enhances the characteristic emission of Eu³⁺ due to the "antenna effect", and the incorporation of NCDs into the probe further improves the Eu³⁺ fluorescence by remarkably weakening the quenching effect caused by H₂O molecules and efficiently shortening the distance of energy transfer from OTC to Eu³⁺. Meanwhile, the fluorescence of NCDs apparently decreases due to aggregation-caused quenching. The results demonstrate that a ratiometric detection of OTC (0.1-25 µM) with a detection limit of 29 nM based on the double response signals is achieved. Additionally, visual semi-quantitative assay of OTC can be realized with the naked eye under a 365 nm UV lamp according to the fluorescence color change of the as-fabricated probe. This probe exhibits acceptable specificity and anti-interference for OTC assay, holding promise for the fast detection of OTC in real water and milk samples.

UiO-66-NH2 based fluorescent sensing for detection of tetracyclines in milk

In this work, a fluorescent sensor based on a zirconium-based metal organic framework was prepared for the detection of tetracyclines (TCs) in milk. The UiO-66-NH2 fluorescent sensor was synthesized by a simple microwave-assisted method with 2-aminoterephthalic acid and zirconium chloride as precursors. In the presence of target TCs, the synergistic effect of the inner filter effect (IFE) and photo-induced electron transfer (PET) was responsible for the fluorescence quenching of UiO-66-NH2, and the fluorescence sensor showed a rapid fluorescence quenching response (5 min) to target TCs. The proposed UiO-66-NH2 sensor had good sensitivity and selectivity, and under the optimal conditions possessed detection limits of 0.449, 0.431, and 0.163 μM for tetracycline (TET), oxytetracycline (OTC), and doxycycline (DOX), respectively. Besides, the UiO-66-NH2 sensor was successfully applied to the quantitative detection of TCs in milk samples with reasonable recoveries of 93.26-115.17%, and the detection results achieved from the as-fabricated fluorescence sensing assay were consistent with those of high-performance liquid chromatography (HPLC), indicating the potential applicability of the UiO-66-NH2 sensor for detecting TCs in actual food samples.

Fluorescence sensing by carbon nanoparticles

Sensing is one of the most important fields in which chemists, engineers and other scientists are involved to realize sensoristic devices that can detect different analytes, both chemicals and biologicals. In this context, fluorescence sensing paves the way for the realization of smart sensoristic devices due to the possibility to detect the target analyte via a change in colour or emission. Recently (since 2006), carbon nanoparticles, which are a "new class" of nanostructures based on carbon atoms, have been widely used in sensing applications due to their intriguing optical properties. The scientific literature on this topic started from 2006 and a progressive increase in the corresponding number of publications has been observed. This review summarises the application of carbon nanoparticles in the sensing field, focusing on chemical and ion sensing.

A Review on the Use of Biochar Derived Carbon Quantum Dots Production for Sensing Applications

Since their discovery, carbon dots have attracted a great deal of interest for their perspective biological applications. Nevertheless, the quenching of carbon dots photoluminescence represents an interesting feature for quantitative analysis in very low concentration of many species. A particular approach for the production of carbon dots is the use of biochar, a carbonized biomass, as a precursor. In this work, we overview the main achievements accomplished by using biochar-derived carbon dots for detecting and quantifying inorganic and organic species. We also provide background knowledge of the main properties, production and purification routes of carbon dots.

Aggregation-induced emission monomer-based fluorescent molecularly imprinted poly(ionic liquid) synthesized by a one-pot method for sensitively detecting 4-nitrophenol

An aggregation-induced emission monomer-based fluorescent molecularly imprinted poly(ionic liquid) (AIE-FMIPIL) was synthesized for the first time with an AIE probe 4-(1,2,2-triphenylvinyl)phenyl acrylate (TPE), and an ionic liquid as dual functional monomers, and an ionic liquid as cross-linker. AIE-FMIPIL displayed a sphere-like shape and its average diameter was 410 nm. The absolute quantum yields of TPE and AIE-FMIPIL were 9.23% and 12.61%, respectively. The synergetic effect of TPE in the AIE-FMIPIL framework contributed to the higher quantum yield of AIE-FMIPIL. 4-Nitrophenol (4-NP) efficiently quenched AIE-FMIPIL with high fluorescence based on the Förster resonance energy transfer mechanism. The synthesized AIE-FMIPIL sensor was highly sensitive for 4-NP detection (linear range, 0.02-1.5 μM) in the optimal detection condition, with a low detection limit of 10 nM (S/N = 3). AIE-FMIPIL showed increased sensitivity and quenching efficiency compared with AIE-FMIP comprising a traditional monomer and cross-linker. AIE-FMIPIL exhibited selective binding to 4-NP because of the imprinted sites. AIE-FMIPIL was adopted to detect 4-NP in environmental samples.

A simple paper-based ratiometric luminescent sensor for tetracyclines using copper nanocluster-europium hybrid nanoprobes

Tetracyclines (TCs), as one of the broad-spectrum antibiotics, are widely used to treat bacterial infections. The residues of TCs in animal-origin foods and drinking water have raised safety concerns and affected the public health. Thus, there is a high demand to develop a simple and rapid method for the detection of TCs. In this work, we developed a ratiometric luminescence probe for the sensitive and visualized detection of TCs. Specifically, tannic acid-stabilized copper nanoclusters (TA-CuNCs) with blue emission at 433 nm were synthesized. The luminescence of TA-CuNCs attenuated partially by the europium ions (Eu³⁺) due to the aggregation-induced quenching. When TCs were added to the TA-CuNCs-Eu³⁺ system, the luminescence of TA-CuNCs at 433 nm can be further quenched by the inner-filter effect, and the characteristic luminescence of Eu³⁺ at 617 nm emerged due to the formation of Eu³⁺-TCs complex. The ratio of the luminescence at 617 nm-433 nm increased linearly to the concentration of TCs. Additionally, we demonstrated the detection of oxytetracycline in real samples such as tap and lake water, milk, pharmaceutical industry wastewater, honey and soil extract with high recovery rate (97.25%-103.44%). Furthermore, a portable paper device is fabricated by the luminescent probe to conduct the on-site analysis of TCs.

Highly selective fluorescence sensor sensing benzo[a]pyrene in water utilizing carbon dots derived from 4-carboxyphenylboronic acid

4-Carboxyphenylboronic acid was used as the single precursor to facilely prepare fluorescent carbon quantum dots by one-step solvothermal method. The as-obtained carbon dots (CDs) exhibited highly selective and sensitive for benzo[a]pyrene (BaP), and may be a splendid sensor for sensing BaP. The principle was that the as-prepared CDs could form a complex with BaP through hydrophobic interaction which causes the decrease of fluorescence intensity of CDs by static quenching principle. The constructed fluorescent sensor exhibited excellent linearity ranged from 0.002 to 0.06 μg mL^-1 and provided a low limit of detection of 0.16 ng mL^-1. The experimental results showed that this fluorescent sensor resulted in simplicity, rapidness, low cost, short analytical time, and high sensitivity and stability. Validation with real water samples endowed the sensor high reliability and feasibility for BaP determination in practical application in various samples.

[Application of carbon dots in analysis and detection of antibiotics]

Antibiotics have been overused in recent years because of their remarkable curative effect, but this has led to considerable environmental pollution. Therefore, the development of approaches aimed at the effective detection and control of the antibiotics is vital for protecting the environment and human health. Many conventional strategies (such as high-performance liquid chromatography (HPLC), gas chromatography (GC), high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS)) are currently in use for the detection of antibiotics. These strategies have aroused a great deal of interest because of their outstanding features of high efficiency and speed, good reproducibility, automation, etc. However, various problems such as tedious sample pretreatment, low detection sensitivity, and high cost must be overcome for the effective detection of antibiotics in environmental samples. Consequently, it is of great significance to improve the detection sensitivity of antibiotics. The development of new materials combined with the existing detection technology has great potential to improve the detection results for antibiotics. Carbon dots (CDs) are a new class of nanomaterials with particle sizes in the range of 0-10 nm. In addition, CDs have desirable properties such as small particle effect, excellent electrical properties, unique optical properties, and good biocompatibility. Hence, they have been widely utilized for the detection of antibiotics in environmental samples. In this review, the application of CDs combined with sensors and chromatographic technology for the detection of antibiotics in the last five years are summarized. The development prospects of CD-based materials and their application to the analysis and detection of antibiotics are presented. In this review, many new sensors (CDs combined with molecularly imprinted polymer sensors, aptamer sensors, electrochemiluminescence sensors, fluorescence sensors, and electrochemical sensors) combined with CD-based materials and their use in the detection of antibiotics are summarized. Furthermore, advanced analysis methods such as ratiometric sensor and array sensor methods are reviewed. The novel analysis methods provide a new direction toward the detection of antibiotics by CDs combined with a sensor. Moreover, CD-based chromatographic stationary phases for the separation of antibiotics are also summarized in this manuscript. It is reported that the detection sensitivity for antibiotics can be greatly improved by the combination of CDs and a sensor. Nevertheless, a literature survey reveals that the detection of antibiotics in complex environmental samples is confronted with numerous challenges, including the fabrication of highly sensitive sensors in combination with CDs. Furthermore, the development of novel high-performance materials is of imperative. In addition, it is important to develop new methods for effective data processing. The separation of antibiotics with CDs as the chromatographic stationary phases is in the preliminary stage, and the separation mechanism remains to be clarified. In conclusion, there are still many problems to be overcome when using CDs as novel materials for the detection of antibiotics in environmental samples. Nowadays, CD-based materials are being intensively studied, and various analytical detection technologies are being rapidly developed. In the future, CD-based materials are expected to play an important role in the detection of antibiotics and other environmental pollutants.

Concentration-dependent photoluminescence carbon dots for visual recognition and detection of three tetracyclines

Concentration-dependent photoluminescence carbon dots (CDs) have been successfully synthesized through the one-step hydrothermal treatment of o-phthalic acid and ethylenediamine. The CDs possessed higher fluorescence quantum yield, up to 39.22%, exhibiting distinguished optical property, water solubility, and stability. The CDs that emit strong blue-green fluorescence can visually identify and determine tetracycline (TC), oxytetracycline (OTC), and chlortetracycline (CTC). TC quenched the fluorescence of CDs at 500 nm owing to the inner filter effect; OTC behaved similarly, but the emission wavelength of CDs was red-shifted to 515 nm. Inversely, once CTC was introduced to CDs solution, the fluorescence increased and the emission peak was blue-shifted to 450 nm. Bandgap transition and electrostatic interaction were proposed to be the mechanisms for the detection of OTC and CTC by CDs. Wide linear relationships were established for TC, OTC, and CTC with the limits of detection to be 50 nM, 36 nM, and 373 nM, respectively. Furthermore, the nanoscale probe constructed by this system has been applied to detect tetracyclines (TCs) in complex samples with satisfying recoveries (93.2-114%) and was designed as a portable test strip sensor for visually on-site TCs of honey sample screening. Accordingly, the preparation process of the nano fluorescent probe is simple and environmentally friendly, and the probe has a specific recognition ability for tetracyclines. The synthesized CDs in this work provide a new orientation for fast, effective, and visual real-time detection of tetracycline in actual samples.