Fabricating multifunctional low-toxicity ratiometric fluorescent probe for individual detection of Cu2+/glutamate and continuous sensing for glutamate via Cu2+-based platform

Engineering of molecularly imprinted cavity within 3D covalent organic frameworks: An innovation for enhanced extraction and removal of microcystins

The scarcity of selective adsorbents for efficient extraction and removal of microcystins (MCs) from complex samples greatly limits the precise detection and effective control of MCs. Three-dimensional covalent organic frameworks (3D COFs), characterized by their large specific surface areas and highly ordered rigid structure, are promising candidates, but suffer from lack of specific recognition. Herein, we design to engineer molecularly imprinted cavities within 3D COFs via molecularly imprinted technology, creating a novel adsorbent with exceptional selectivity, kinetics and capacity for the efficient extraction and removal of MCs. As proof-of-concept, a new CC bond-containing 3D COF, designated JNU-7, is designed and prepared for copolymerization with methacrylic acid, the pseudo template L-arginine and ethylene dimethacrylate to yield the JNU-7 based molecularly imprinted polymer (JNU-7-MIP). The JNU-7-MIP exhibits a great adsorption capacity (156 mg g-1) for L-arginine. Subsequently, the JNU-7-MIP based solid-phase extraction coupled with high performance liquid chromatography-mass spectrometry achieves low detection limit of 0.008 ng mL-1, wide linear range of 0.025-100 ng mL-1, high enrichment factor of 186, rapid extraction of 10 min, and good recoveries of 92.4%-106.5% for MC-LR. Moreover, the JNU-7-MIP can rapidly remove the MC-LR from 1 mg L-1 to levels (0.26-0.35 μg L-1) lower than the WHO recommended limit for drinking water (1 μg L-1). This work reveals the considerable potential of 3D COF based MIPs as promising adsorbents for the extraction and removal of contaminants in complex real samples.

Dual-Function Platform Based on Postsynthetic Functionalization of a Water-Stable Hydrogen-Bonded Organic Framework: Ratiometric Sensing of Nicotine and Cotinine and Dynamic Anticounterfeiting for Information Encryption

Nicotine and its major metabolite cotinine are widely used as markers of tobacco smoke abstinence as well as indicators of active smoking levels and the assessment of passive inhalation of tobacco smoke in nonsmokers. Therefore, using an easy-to-prepare sensing platform that can provide a rapid, highly sensitive response for the simultaneous detection of salivary nicotine levels and urinary cotinine levels is especially crucial for helping heavy cigarette smokers quit smoking and protecting public health. Hydrogen-bonded organic frameworks, as a novel class of porous crystalline materials, show immense potential for functional modification and optical sensing. Herein, a new HOF was prepared by a simple solvent evaporation method, and a dual-emitting material Eu(bpy)@HOF-215(1) was obtained by the postsynthetic modification of HOF by lanthanide luminescent complexes, which maintains favorable structural stability and introduces the characteristic emitting of Eu, allowing use as a ratiometric fluorescent sensor for salivary nicotine and urinary cotinine, with a limit of detection of nicotine of 0.045 μM in saliva and a limit of detection of cotinine of 0.591 μM in urine. Furthermore, luminescent inks based on HOF-215 have been fabricated based on the photoresponse variations of 1 to NIC and COT, which enables the multilevel encryption and decryption of information, in a dynamic and recyclable process. This work not only synthesizes a novel blue HOF but also provides a representative successful case of a dual-function platform for simultaneous application to ratiometric sensing and dynamic anticounterfeiting.

Fluorescence on and off sensing platform based on europium nanosheets for the detection of DPA and Cu2+ ions

With the development of society, the modern environment has put forward higher requirements for analysis and detection. This work proposes a new strategy for the construction of fluorescent sensors based on rare-earth nanosheets. Organic/inorganic composites were obtained by the intercalation of 4,4'-stilbene dicarboxylic acid (SDC) into layered europium hydroxide, and then the composites were exfoliated to form nanosheets. Taking advantage of the fluorescence emission characteristics of SDC and Eu³⁺, a ratiometric fluorescent nanoprobe was constructed, which realized the detection of dipicolinic acid (DPA) and Cu²⁺ in the same system. With the addition of DPA, the blue emission of SDC gradually decreased and the red emission of Eu³⁺ gradually increased, when Cu²⁺ was added, the emission of SDC and Eu³⁺ were gradually weakened. The experimental results showed that the ratio of fluorescence emission intensity (I₆₁₉/I₃₉₄) of the probe had a positive linear relationship with the concentration of DPA, and a negative linear relationship with the concentration of Cu²⁺, thus realizing the high sensitivity detection of DPA and a wide detection range of Cu²⁺. In addition, this sensor also exhibits potential visual detection possibilities. This is a multifunctional fluorescent probe that provides a novel and efficient method for the detection of DPA and Cu²⁺, which broadens the application field of rare-earth nanosheets.

Metal-Organic Frameworks-Based Nanoplatforms for the Theranostic Applications of Neurological Diseases

Neurological diseases are the foremost cause of disability and the second leading cause of death worldwide. Owing to the special microenvironment of neural tissues and biological characteristics of neural cells, a considerable number of neurological disorders are currently incurable. In the past few years, the development of nanoplatforms based on metal-organic frameworks (MOFs) has broadened opportunities for offering sensitive diagnosis/monitoring and effective therapy of neurology-related diseases. In this article, the obstacles for neurotherapeutics, including delayed diagnosis and misdiagnosis, the existence of blood brain barrier (BBB), off-target treatment, irrepressible inflammatory storm/oxidative stress, and irreversible nerve cell death are summarized. Correspondingly, MOFs-based diagnostic/monitoring strategies such as neuroimaging and biosensors (electrochemistry, fluorometry, colorimetry, electrochemiluminescence, etc.) and MOFs-based therapeutic strategies including higher BBB permeability, targeting specific lesion sites, attenuation of neuroinflammation/oxidative stress as well as regeneration of nerve cells, are extensively highlighted for the management of neurological diseases. Finally, the challenges of the present research from perspective of clinical translation are discussed, hoping to facilitate interdisciplinary studies at the intersections between MOFs-based nanoplatforms and neurotheranostics.

Paper-based analytical device coupled with Bi-MOF: Electric field amplification and fluorescence sensing of glyphosate

Glyphosate, a potent herbicide wildly used in the world, involves potential hazards to human health by accumulating in the food chain. Due to its absence of chromophores and fluorophores, the rapid visual detection of glyphosate has always been difficult. Herein, a paper-based geometric field amplification device visualized by the amino-functionalized bismuth-based metal-organic framework (NH₂-Bi-MOF) was constructed for sensitive fluorescence determination of glyphosate. Fluorescence of the synthesized NH₂-Bi-MOF was immediately enhanced by interaction with glyphosate. The field amplification of glyphosate was implemented by coordinating the electric field and the electroosmotic flow, which was orchestrated by the geometric configuration of paper channel and the concentration of polyvinyl pyrrolidone, respectively. Under the optimal conditions, the developed method exhibited a linear range of 0.80-200 μmol L^-1 with about 12500-fold signal enhancement achieved by just 100 s electric field amplification. It was applied to soil and water with recoveries between 95.7% and 105.6%, holding great prospects in on-site analysis of hazardous anions for environment safety.

A ratio fluorescence sensor based on rhodamine B embedded metal-organic framework for glyphosate detection in agri-food products

Glyphosate, a broad-spectrum and high-efficiency herbicide, could accumulate in the human body through the consumption of agri-food products. Herein, a ratio fluorescence sensor based on rhodamine B-embedded amino-functionalized iron-based metal-organic framework (MOF, NH2-MIL-88(Fe)@RhB) bonded with Cu2+ was developed for rapid detection of glyphosate. The synthesized NH2-MIL-88(Fe) was a biconical prism and had a cavity for the embedding of RhB as a reference compound. In the presence of Cu2+, Lewis interactions with NH2-MIL-88(Fe)@RhB cause the fluorescence signal to be turned off. When glyphosate was added, the signal was turned on due to chelation with Cu2+ and hydrogen bonding interactions with NH2-MIL-88(Fe)@RhB. Under optimal conditions, the developed sensor exhibited a linear range of 0.60-45 μmol L-1 with a response time of less than 1 min. The sensor was applied in the analysis of agri-food products (tea, soybean, wheat, cucumber), with recoveries between 97.93% and 109.06%, indicating its promising application in agri-food safety.

A Chemosensor of 1,8-Dihydroxyanthraquinone PMOs Prepared in a Ternary Deep Eutectic Solvent for the Sensitive Detection of Cu2

A novel type of organic-inorganic hybrid periodic mesoporous materials based on 1,8-dihydroxyanthraquinone (DHAQ-PMOs) was synthesized in a ternary deep eutectic solvent (DES). In the process of the material synthesis, an organosiloxane precursor (DHAQ-Si) and tetraethylorthosilicate (TEOS) were used as the mixed Si source, and cetyltrimethylammonium bromide (CTAB) was used as the structure directing agent. The DES formed by choline chloride (ChCl), urea (U), and ethylene glycol (EG) was used as a green solvent. The water needed for the hydrolysis of DHAQ-Si and TEOS was provided from free water in the sodium hydroxide solution. As characterized by small-angle X-ray scattering, nitrogen adsorption/desorption isotherms, and high-resolution transmission electron microscopy, the obtained mesoporous materials exhibit a two-dimensional hexagonal (P6mm) structure. DHAQ possesses double fluorescence emission peaks at ca. 520 and 580 nm due to the effect of the excited-state intramolecular proton transfer (ESIPT). For DHAQ-PMOs, the silica framework can provide a rigid environment that makes the fluorescence properties more stable and the fluorescence emission peak appears to red-shift obviously. The DHAQ-PMOs have high selectivity and sensitivity in a wide pH range that can be used to detect Cu²⁺, and the limit of detection (LOD) is as low as 2.39 × 10^-9 M. Fluorescence polarization experiments, high-resolution mass spectrometry, and Fourier transform infrared spectroscopy were used to study the coordination interaction between DHAQ and Cu²⁺. The density functional theory (DFT) was used to further prove the coordination ability and interaction between DHAQ and Cu²⁺. XPS spectra were also done to prove the coordination of DHAQ and DHAQ-PMO-10 with Cu²⁺. In addition, confocal fluorescence microscope images exhibit that DHAQ-PMOs can detect Cu²⁺ in living cells. The results show that DHAQ-PMOs have great application potential as a sensor for the detection of Cu²⁺.

Ratiometric fluorescence sensing with logical operation: Theory, design and applications

The construction of ratiometric fluorescence sensing logic systems has gradually become a hot topic in fluorescence analysis, due to the multi-target analysis potential of logic operations and the high specificity and selectivity of ratiometric fluorescence sensing. In this paper, the basic principles of various logic functions implemented in ratiometric fluorescence detection are discussed in the context of sensing mechanisms, and the strategies for constructing logic systems in different ratiometric fluorescence sensing application areas are summarized. Although there are limitations such as cumbersome operations and complicated experiments, ratiometric fluorescence sensing logic circuits that combine the visualization of logic operations and the accuracy of ratiometric fluorescence are still worthy of in-depth study. This review may be useful for researchers interested in the construction of logic operations based on ratiometric fluorescence sensing applications.

Recent advances in molecular logic gate chemosensors based on luminescent metal organic frameworks

Luminescent metal-organic frameworks (LMOFs) as chemosensors, can sense various analytes, such as heavy metal ions, antibiotics, pesticides, and small biological molecules. Based on the fluorescence characteristics of LMOFs, a variety of logic gates have been developed. In this review, we mainly discuss some common logic systems based on LMOFs, and then summarize the strategies of constructing logic gates from two perspectives. One is based on superior characteristics of MOFs, which can be synthesized from Ln3+ based MOFs (Ln-MOFs) or form hybrids by encapsulating different materials, including metal ions, dyes, and quantum dots (QDs). The other is to control the presence of inputs by reactions between different reactants and then further control switches of logic gates. Additionally, the common sensing mechanisms of LMOFs in logic gates are discussed. In the end, we have envisioned MOFs that possess a promising future in logic computing areas.