Gold nanostar@graphene quantum dot as a new colorimetric sensing platform for detection of cysteine

An efficient chemiluminescent probe based on Ni-doped CsPbBr3 perovskite nanocrystals embedded in mesoporous SiO2 for sensitive assay of L-cysteine

This study presents an efficient chemiluminescence (CL) probe based on perovskite nanocrystals (NCs) for detection of L-cysteine (L-Cys). It consists of nickel-doped CsPbBr3 NCs embedded in the mesoporous SiO2 matrix as CL reagent and cerium (IV) as an oxidant in aqueous environment. The probe was designed for the highly selective determination of L-Cys based on its remarkable enhancing effect on the CL intensity. The colloidal nanocomposite of nickel-doped CsPbBr3 NCs@SiO2 with photoluminescence quantum yield of 58% was fabricated by ligand-assisted re-precipitation method and characterized by using UV-Vis absorption, FT-IR, X-ray diffraction, and transmission electron microscopy. The sensor was utilized to determine L-Cys in the linear concentration range of 20-300 nM with a detection limit of 12.8 nM. Direct chemical oxidation of Ni-doped CsPbBr3 NCs@SiO2 by Ce(IV) was the single cause of the formation of the excited-state NCs and subsequent production of CL. The developed probe provides outstanding selectivity towards L-Cys over structurally related compounds. Accurate determination of L-Cys in human serum samples was achieved without interference, and the results were confirmed by HPLC method.

Carbon dots@noble metal nanoparticle composites: research progress report

Carbon dots@noble metal nanoparticle composites are formed by combining carbon dots and metal nanoparticles using various strategies. Carbon dots exhibit a reducing ability and function as stabilisers; consequently, metal-ion solutions can be directly reduced by them to synthesise gold, silver, and gold-silver alloy particles. Carbon dots@gold/silver/gold-silver particle composites have demonstrated the potential for several practical applications owing to their superior properties and simple preparation process. Until now, several review articles have been published to summarise fluorescent carbon dots or noble metal nanomaterials. Compared with metal-free carbon dots, carbon dots@noble metal nanoparticles have a unique morphology and structure, resulting in new physicochemical properties, which allow for sensing, bioimaging, and bacteriostasis applications. Therefore, to promote the effective development of carbon dots@noble metal nanoparticle composites, this paper primarily reviews carbon dots@gold/silver/gold-silver alloy nanoparticle composites for the first time in terms of the following aspects. (1) The synthesis strategies of carbon dots@noble metal nanoparticle composites are outlined. The principle and function of carbon dots in the synthesis strategies are examined. The advantages and disadvantages of these methods and composites are analysed. (2) The characteristics and properties of such composites are described. (3) The applications of these composite materials are summarised. Finally, the potentials and limitations of carbon dots@noble metal nanoparticle composites are discussed, thus laying the foundation for their further development.

Plasmonic colorimetric immunosensor based on Poly-HRP and AuNS etching for tri-modal readout of small molecule

It was urgent to improve the intuitive, portable, sensitive and multi-modal detection method for small molecules. In this study, a tri-modal readout of plasmonic colorimetric immunosensor (PCIS) for small molecule (zearalenone, ZEN, as an example) had been established based on the Poly-HRP amplification and gold nanostars (AuNS) etching. The immobilized Poly-HRP from the competitive immunoassay was used to catalyze iodide (I^-) into iodine (I₂), which could prevent the AuNS etching by I^-. With the increasing of ZEN, the AuNS etching was enhanced, and the localized surface plasmon resonance (LSPR) peak of AuNS showed stronger blue shift, which resulted in the color changing from deep blue (no-etching) to blue violet (half-etching) and finally to shiny red (all-etching). The results of PCIS could be selectively obtained by the tri-modal readout: (1) naked eye (LOD of 0.10 ng/mL), (2) smartphone (LOD of 0.07 ng/mL) and (3) UV-spectrum (LOD of 0.04 ng/mL). The proposed PCIS had performed well in the sensitivity, specificity, accuracy and reliability. In addition, the harmless reagents were used in the overall process to further guarantee the environmental friendliness. Therefore, the PCIS might provide a novel and green avenue for the tri-modal readout of ZEN via the intuitive naked eye, portable smartphone and accurate UV-spectrum, which hold great potential for small molecule monitoring.

A DFT Study of Phosphate Ion Adsorption on Graphene Nanodots: Implications for Sensing

The optical properties of graphene nanodots (GND) and their interaction with phosphate ions have been investigated to explore their potential for optical sensing applications. The absorption spectra of pristine GND and modified GND systems were analyzed using time-dependent density functional theory (TD-DFT) calculation investigations. The results revealed that the size of adsorbed phosphate ions on GND surfaces correlated with the energy gap of the GND systems, leading to significant modifications in their absorption spectra. The introduction of vacancies and metal dopants in GND systems resulted in variations in the absorption bands and shifts in their wavelengths. Moreover, the absorption spectra of GND systems were further altered upon the adsorption of phosphate ions. These findings provide valuable insights into the optical behavior of GND and highlight their potential for the development of sensitive and selective optical sensors for phosphate detection.

Gold Nanoparticles as Exquisite Colorimetric Transducers for Water Pollutant Detection

Gold nanoparticles (AuNPs) are useful nanomaterials as transducers for colorimetric sensors because of their high extinction coefficient and ability to change color depending on aggregation status. Therefore, over the past few decades, AuNP-based colorimetric sensors have been widely applied in several environmental and biological applications, including the detection of water pollutants. According to various studies, water pollutants are classified into heavy metals or cationic metal ions, toxins, and pesticides. Notably, many researchers have been interested in AuNP that detect water pollutants with high sensitivity and selectivity, while offering no adverse environmental issues in terms of AuNP use. This review provides a representative overview of AuNP-based colorimetric sensors for detecting several water pollutants. In particular, we emphasize the advantages of AuNP as colorimetric transducers for water pollutant detection in terms of their low toxicity, high stability, facile processability, and unique optical properties. Next, we discuss the status quo and future prospects of AuNP-based colorimetric sensors for the detection of water pollutants. We believe that this review will promote research and development of AuNP as next-generation colorimetric transducers for water pollutant detection.

Functionalization of Gold Nanostars with Melamine for Colorimetric Detection of Uric Acid

Gold nanostars (AuNSs) are synthesized using a seed-mediated growth method. The synthesized AuNSs solution is stable and shows a localized surface plasmon resonance (LSPR) band in the visible range, which is confirmed using ultraviolet-visible (UV-Vis) spectroscopy. Furthermore, the as-synthesized AuNSs were functionalized with melamine and used as a sensor for the colorimetric detection of uric acid (UA). The detection mechanism could be assessed through various analytical techniques such as UV-Vis spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, dynamic light scattering (DLS), zeta potential, field emission scanning electron microscopy (FE-SEM), and transmission electron microscopic techniques. These methods exhibited a good linear regression between the absorption ratio of LSPR band of melamine-AuNSs and the concentration of UA (0-120 µM), with the detection limit of 8.50 nm. As a result, UA was quantitatively detected in biofluids by using melamine-AuNSs as a colorimetric sensor, revealing melamine-AuNSs-based colorimetric approach which could be used as a simple platform for UA assay in biofluids.

Highly sensitive colorimetric assay for penconazole using gold nanostar-graphene quantum dot composite

In this study, a simple and sensitive colorimetric method for penconazole sensing is reported. It is based on the etching/anti-etching strategy in which gold nanostar@graphene quantum dot (AuNS@GQD) nanocomposite acts as a sensing nanoprobe and IO₄^- as an etching agent. With adding IO₄^- to the solution of AuNSs@GQDs, the sharp tips of NSs are etched and they are transformed into nearly spherical nanostructures, and the color of the solution changes from green to violet. These changes can be attributed to the oxidation of gold atoms at the sharp corners and tips of NSs with I₂, produced by the reaction of IO₄^- with AuNS@GQD solution. When penconazole is added into the system, the color and shape variations of AuNSs caused by periodate are impressively prevented. It can be assigned to the strong binding affinity between nitrogen atoms of penconazole and gold atoms, which protects them from etching by I₂. This mechanism has been affirmed via transmission electron microscopy (TEM) and UV-Vis spectra. This approach exhibited a good linear relationship (R² = 0.999) between the wavelength shift and penconazole concentration in the range of 5.0-1000.0 nM with a limit of detection (LOD) of 1.5 nM. The sensor is stable and reproducible and was used to measure penconazole in spiked water samples with recoveries over 97%.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

Microfluidic preparation of optical sensors for biomedical applications

Optical biosensors are platforms that translate biological information into detectable optical signals, and have extensive applications in various fields due to their characteristics of high sensitivity, high specificity, dynamic sensing, etc. The development of optical sensing materials is an important part of optical sensors. In this review, we emphasize the role of microfluidic technology in the preparation of optical sensing materials and the application of the derived optical sensors in the biomedical field. We first present some common optical sensing mechanisms and the functional responsive materials involved. Then, we describe the preparation of these sensing materials by microfluidics. Afterward, we enumerate the biomedical applications of these optical materials as biosensors in disease diagnosis, drug evaluation, and organ-on-a-chip. Finally, we discuss the challenges and prospects in this field.

A "turn-on" inverse opal photonic crystal fluorescent sensing film for detection of cysteine and its bioimaging of living cells

A "turn-on" inverse opal photonic crystal fluorescent sensing film infiltrated with a coumarin derivative is reported for the reliable and accurate detection of cysteine in human serum and fluorescence imaging of living cells. The coumarin derivative containing allyl ester specifically reacts with cysteine by ammonolysis to generate a fluorescent product whose emission wavelength is at ~ 535 nm, providing a selective fluorescence detection for cysteine. The emitted fluorescence is significantly enhanced due to the slow photon effect derived from the photonic crystal film. This is because the emission wavelength is overlapped with the blue-band edge of the photonic stopband of the selected inverse opal film. The fluorescence enhancement effect endows the prepared inverse opal film with highly sensitive detection with a limit of detection of 3.23 × 10^-9 mol/L and a wide linear detection range of 1 × 10^-7 - 1 × 10^-3 mol/L. A fast response within 30 s toward cysteine is also achieved due to the three-dimensional interconnected macroporous structure with a high-specific surface area of the inverse opal film. The prepared inverse opal fluorescent sensing film has been successfully applied to the detection of cysteine in human serum and bioimaging of living cells. In the diluted human serum, the recoveries for the detection of cysteine were 97.92 - 107.20%, and the relative standard deviations were 2.61-9.04%, demonstrating the potential applicability of the inverse opal fluorescent sensing film to real sample analysis. The method may provide a universal strategy for constructing various photonic crystal fluorescent sensing films by using different fluorescent probes.

Ultrasmall Pt Nanozymes Immobilized on Spherical Polyelectrolyte Brushes with Robust Peroxidase-like Activity for Highly Sensitive Detection of Cysteine

Distinct platinum (Pt) nanozymes as peroxidase mimics have received extensive interest owing to their outstanding catalytic activity, high environmental tolerance, lower consumption, and great potential in replacing natural enzymes. However, easy agglomeration of Pt nanoparticles (Pt NPs) resulting from the high surface free energy significantly decrease their peroxidase-like activity. Herein, spherical polyelectrolyte brush (SPB)-stabilized ultrasmall Pt NPs (SPB@Pt NPs) were prepared by a novel synthetic strategy where the SPB not only performed as a nanoreactor for the synthesis of ultrasmall Pt NPs but also greatly stabilized Pt NPs against aggregation. The well-defined SPB@Pt NP nanozymes exhibited outstanding peroxidase-like activity for the catalytic oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB and were then used to establish a colorimetric sensor for rapid detection of cysteine, giving a limit of detection of 0.11 μM. Moreover, the colorimetric detection system was demonstrated with outstanding performance in sensitive and selective detection of cysteine in the presence of several interference molecules. From these results, SPB@Pt NPs have been regarded as promising peroxidase mimics for a large number of applications such as in biosensing, biomedicine, the food industry, and environmental chemistry.

Quick and sensitive colorimetric detection of amino acid with functionalized-silver/copper nanoparticles in the presence of cross linker, and bacteria detection by using DNA-template nanoparticles as peroxidase activity

In this project, poly (citric acid) (PCA) functionalized on nano Ag/Cu was synthesized by chemical analysis method. The nano probe was applied to detection of cysteine by using the magnesium (II) ions as a cross linker. The characterization of Ag/Cu/PCA nano probe was studied by using the UV-visible, morphological microscopy, dynamic light scattering, and zeta potential analyzer. The zeta potential and size of Ag/Cu/PCA were -38.0 mV and 18.0 nm, respectively. The prepared nano probe shows rapid response for detection of cysteine. The detection limit of Ag/Cu/PCA nano probe was 0.07 nM. Additional, the Ag/Cu/PCA nanoparticles was applied to cysteine detection from real samples in the presence of amino acids compounds. Rapidly and sensitive determination of Streptococcus pneumoniae is substantial for food safety and human health. The DNA-Ag/Cu/PCA were prepared as a template in chemical method and experimented as a bio-receptor for the cell bacteria detection as peroxidase-like catalytic process. The DNA-Ag/Cu/PCA nano probe shows a linear dynamic concertation range of Streptococcus pneumoniae via detection limit about 65 CFU/mL. The project presents that the DNA-Ag/Cu/PCA could detect the biological and bacterial samples via high accuracy.

A novel colorimetric sensor for naked-eye detection of cysteine and Hg2+ based on "on-off" strategy using Co/Zn-grafted mesoporous silica nanoparticles

In an attempt to explore the significance of inorganic mimetic enzymes as sensors, this study introduces a naked-eye analytical sensing platform for the detection of L-cysteine (cys), mercury ions (Hg²⁺) based on (turn off/turn-on) catalytic activity of zinc and cobalt grafted mesoporous silica nanoparticles (MSNs). To this end, Zn-MSN and Co/Zn-MSN catalysts were synthesized and characterized using XRD, FT-IR, FESEM, TEM, and nitrogen adsorption-desorption methods. Then, using the intrinsic peroxidase-like activity of as-synthesized samples, the oxidation reactions of the chromogenic substrate (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS)) was designed using H₂O₂, which produced green colored cation radical of ABTS. Considering the high peroxidase-like activity of Co/Zn-MSN in comparison to Zn-MSN, it was employed to detect cys and then Hg²⁺. The results indicated that the strong interaction between cys and Co/Zn-MSN was proved by a limit of detection (LOD) down to 0.24 nM and the linear relationship from 0.8-50 nM (turn off). Given the fact that Hg²⁺ has a high-affinity tendency to combine with cys, we were suggested a novel colorimetric path for sensing of Hg²⁺ in the presence of cys (turn on). Based on this method, LOD was found 0.17 nM with the linear range of 0.57-50 nM. Taken together, results showed that the as-prepared catalysts are superior to other nanoparticles as a sensor to measure the target molecules in biological monitoring and clinical diagnostics.