Preparation of fluorescent bimetallic silver/copper nanoparticles and their utility of dual-mode fluorimetric and colorimetric probe for Hg2

Probe-impregnated monolithic polymer as a robust solid-state colorimetric chemosensor for selective sensing of Hg2+ in environmental water and cigarette samples

The current study developed a novel aqua-compatible and naked-eye portable solid-state opto-sensor for selective and sensitive detection of ultra-trace Hg²⁺ ions. The developed chemosensor was fabricated by the direct impregnation of a chromoionophoric probe composed of 2,3-bis((4-isopropylbenzylidene)amino)maleonitrile (PDPM) onto the surface of structurally tailored porous polymer monolithic framework. The template exhibited a highly porous network with greater surface area, which led to the effective anchoring of probe molecules onto the surface of the polymer template, thus serving as an efficient platform to constitute a regenerative solid-state chemosensor. The sensor rendered a superior color shift from dull white to dijon yellow after complexing with Hg²⁺. The surface, structural, and morphological aspects of the sensor were evaluated using FE-SEM, HR-TEM, EDAX, SAED, p-XRD, N₂ adsorption isotherm, and XPS. Rigorous optimization of the effects of different analytical parameters on the sensing performance of the PDPM sensor material was ensured. The monolithic sensor had an optimum sensing performance at pH 8.0, rapid signal response kinetics of 60s and a broad linear response range of 0.5-150.0 μg/L with a 0.22 μg/L detection limit. Furthermore, the sensor was also tolerant of foreign matrix constituents, thereby enabling it to be highly selective in detecting Hg²⁺. Sensor recovery was analyzed to be possible via Hg²⁺ desorption using 0.01 M EDTA without compromising its sensing performance. It had reutilization potential for up to eight regenerative cycles with excellent data reliability (recovery ≥99.4% and RSD ≤1.4%). The practicability of the fabricated sensor was investigated using various water and cigarette samples. Experimental data revealed that the developed chromoionophoric sensor was reusable, eco-friendly, low-cost, and possessed superior sensing capabilities, making it more feasible for on-site analysis of environmental samples. The designed sensor has the potential for further investigations and applications as a sensor kit for facilitating heavy metal detection in remote places.

Colorimetric and Photocurrent-Polarity-Switching Photoelectrochemical Dual-Mode Sensing Platform for Highly Selective Detection of Mercury Ions Based on the Split G-Quadruplex-Hemin Complex

Mercury ion (Hg²⁺) is one of the most harmful heavy metal ions with the greatest impact on public health. Herein, based on the excellent catalytic activity toward 3,3',5,5'-tetramethylbenzidine (TMB) and the strong photocurrent-polarity-switching ability to SnS₂ photoanode of the split G-quadruplex-hemin complex, the magnetic NiCo₂O₄@SiO₂-NH₂ sphere-assisted colorimetric and photoelectrochemical (PEC) dual-mode sensing platform was developed for the Hg²⁺ assay. First, the amino-labelled single-stranded DNA1 (S1) was immobilized on NiCo₂O₄@SiO₂-NH₂ and then partly hybridized with another single-stranded DNA2 (S2). When Hg²⁺ was present, the thymine-Hg²⁺-thymine base pairs between S1 and S2 were formed, causing the formation of the split G-quadruplex in the presence of K⁺. After addition of hemin, the split G-quadruplex-hemin complex was obtained and effectually catalyzed the H₂O₂-mediated oxidation of TMB. Thus, the color and absorbance intensity of the TMB solution were changed, resulting in the visual and colorimetric detection of Hg²⁺. The linear response range is 10 pM to 10 nM, and the detection limit is 3.8 pM. Meanwhile, the above G-quadruplex-hemin complex effectively switched the photocurrent polarity of SnS₂-modified indium tin oxide electrode, leading to the sensitive and selective PEC assay of Hg²⁺ with a linear response range of 5 pM to 500 nM and a detection limit of 2.3 pM. Moreover, the developed dual-mode sensing platform provided mutual authentication of detection results in different modes, effectively improving the assay accuracy and confidence, and may have a good potential application in highly sensitive, selective, and accurate determination of Hg²⁺ in environmental fields.

Silver-Copper Alloy Nanoinks for Ambient Temperature Sintering

There is an increasing need to reduce the silver content in silver-based inks or pastes and achieve low-temperature sintering for scalable and low-cost production of printed wearable electronics. This need depends on the ability to control the metal composition and the surface properties of the nanoinks. Alloying silver with copper provides a pathway for meeting the need in terms of cost reduction, but little is known about the composition controllability and the low-temperature sintering capability. We report herein a scalable wet chemical synthesis of bimetallic silver-copper alloy nanoinks with room temperature sintering properties. The bimetallic alloy nanoparticles with a controllable composition can be formulated as stable nanoinks. The nanoinks printed on paper substrates are shown to sinter under room temperature. In addition to composition dependence, the results reveal an intriguing dependence of sintering on humidity above the printed nanoink films. These findings are assessed based on theoretical simulation of the sintering processes via surface-mediated sintering and interparticle necking mechanisms in terms of nanoscale adsorption, adhesion and diffusion, and surface free energies. Implications of the findings for room temperature fabrication of wearable sensors are also discussed.

L-Cysteine functionalized graphene oxide nanoarchitectonics: A metal-free Hg2+ nanosensor with peroxidase-like activity boosted by competitive adsorption

Developing non-noble metal, even metal-free chemical sensors for the detection of toxic heavy metal ions is significantly desirable for economically and environmentally sustainable application but has heretofore remained elusive. Herein, a _L-cysteine functionalized graphene oxide nanosheet (CGO) nanoarchitectonics, greenly synthesized by a very simple method at room temperature, was utilized to realize the simultaneous enrichment and colorimetric detection of trace mercury ions (Hg²⁺). It was discovered that CGO, as a nanozyme mimic exhibited greatly enhanced peroxidase-like catalytic activity than the pristine graphene oxide. By exploring the interactions of CGO nanozyme with colorimetric substrate, 3,3',5,5'-tetramethylbenzidine (TMB) and target Hg²⁺ ions, we found that the sensing principle was based mainly on the competitive adsorption between Hg²⁺ ions and TMB over CGO. The pre-capture of Hg²⁺ ions hindered the TMB binding on CGO, resulting in the promoted oxidation of TMB by H₂O₂ to produce more colored oxidation products, from which the colorimetric sensing of Hg²⁺ was realized with a good detection effect on 5 μg L^-1 solution. As an enrichment-sensing integration platform, this metal-free sensor is cost-effective and sensitive, and presents considerable anti-interference ability over other metal ions. Overall, this work not only expands the application of graphene-based materials in colorimetric detection but also provides a general sensing principle to construct highly sensitive sensors.

Fluorimetric and ratiometric colorimetric dual-mode detection of organophosphorus pesticides based on carbon dots/DTNB

Carbon dots/DTNB as fluorimetric and ratiometric colorimetric dual-mode probes for the detection of chlorpyrifos.

The controllable synthesis of orange-red emissive Au nanoclusters and their use as a portable colorimetric fluorometric probe for dopamine

The fabrication of orange-red emissive M-AuNCs and their utility in the detection of dopamine assisted by a smartphone.