Quick and sensitive colorimetric detection of amino acid with functionalized-silver/copper nanoparticles in the presence of cross linker, and bacteria detection by using DNA-template nanoparticles as peroxidase activity

Tuning Nanographene-Enhanced Raman Scattering for Rapid Label-Free Detection of Amino Acids

The rapid and sensitive detection of amino acids is important not only for fundamental studies but also for the establishment of a healthy society. However, conventional detection methods have been hampered by the difficulties of low sensitivity, long sampling and detection times, and expensive operation and instruments. Here, we report the plasma engineering of bioresource-derived graphene quantum dots (GQDs) as surface-enhanced Raman scattering (SERS)-active materials for the rapid and sensitive detection of amino acids. Surface-functionalized GQDs with tuned structures and band gaps were synthesized from earth-abundant bioresources by using reactive microplasmas under ambient conditions. Detailed microscopy and spectroscopy studies indicate that the SERS properties of the synthesized GQDs can be tuned by controlling the band gaps of synthesized GQDs. The plasma-synthesized metal-free GQDs with surface functionalities showed improved SERS properties for rapid amino acid detection with low detection limits of 10-5 M for tyrosine and phenylalanine. Theoretical calculations suggest that charge transfer between GQDs and amino acids can enhance the SERS response of the GQDs. Our work provides insights into the controlled engineering of SERS-active nanographene-based materials using the plasma-enhanced method.

Severe plastic deformation: Nanostructured materials, metal-based and polymer-based nanocomposites: A review

Significant deformation of the metal structure can be achieved without breaking or cracking the metal. There are several methods for deformation of metal plastics. The most important of these methods are angular channel pressing process, high-pressure torsion, multidirectional forging process, extrusion-cyclic compression process, cumulative climbing connection process, consecutive concreting and smoothing method, high-pressure pipe torsion. The nanocomposite is a multiphase material which the size of one of its phases is less than 100 nm in at least one dimension. Due to some unique properties, metal-based nanocomposites are widely used in engineering applications such as the automotive and aerospace industries. Polymer-based nanocomposites are two-phase systems with polymer-based and reinforcing phases (usually ceramic). These materials have a simpler synthesis process than metal-based nanocomposites and are used in a variety of applications such as the aerospace industry, gas pipelines, and sensors. Severe plastic deformation (SPD) is known to be the best method for producing bulk ultrafine grained and nanostructured materials with excellent properties. Different Severe plastic deformation methods were developed that are suitable for sheet and bulk solid materials. During the past decade, efforts have been made to create effective Severe plastic deformation processes suitable for producing cylindrical tubes. In this paper, we review Severe plastic deformation processes intended to nanostructured tubes, and their effects on material properties and severe plastic deformation is briefly introduced and its common methods for bulk materials, sheets, and pipes, as well as metal background nanocomposites, are concisely introduced and their microstructural and mechanical properties are discussed. The paper will focus on introduction of the tube Severe plastic deformation processes, and then comparison of them based on their advantages and disadvantages from the viewpoints of processing and properties.

Photocatalytic and Enhanced Biological Activities of Schiff Base Capped Fluorescent CdS Nanoparticles

In the present work, biocompatible CdS nanoparticles were synthesized using Schiff base ligand, 3-((2-(-(1-(2hydroxyphenyl)ethylidene)amino)ethyl)imino)-2-pentone, by a simple ultrasonic irradiation method. The structural, morphological, and optical properties were studied using XRD, SEM, TEM, UV-visible absorption, and photoluminescence (PL) spectra. The quantum confinement effect of the Schiff base capped CdS nanoparticles was confirmed by using UV-visible and PL spectrum analysis. This CdS nanoparticles were an effective photocatalyst for degrading rhodamine 6G and methylene blue with a 70% and 98% degradation capacity, respectively. Furthermore, the disc-diffusion method demonstrated that CdS nanoparticles inhibit G-positive bacteria and G-negative bacteria more effectively. These Schiff base capped CdS nanoparticles were taken for an in-vitro experiment with HeLa cells to exhibit the possibility of providing optical probes in biological applications and observed under a fluorescence microscope. In addition, MTT cell viability assays were carried out to investigate the cytotoxicity for 24 h. As a result of this study, 2.5 µg/ml doses of CdS nanoparticles are suitable for imaging and are effective in destroying HeLa cells. The present study suggests that the synthesized Schiff base capped CdS nanoparticles could be a potential photocatalyst, antibacterial agent, and biocompatible nanoparticle for bioimaging applications.

Photodynamic therapy in cancer treatment: properties and applications in nanoparticles

Most of the treatment strategies for tumors and other disorders is photodynamic therapy (PDT). For several years, increasing the efficiency of nanostructured treatment devices, including light therapy, has been considered in different treatment methods. Light Dynamics The use of nanomaterial in this method's production and progress. The use of nanoparticles as carriers is a promising accomplishment, since all the criteria for an ideal photodynamic therapy agent can be given with these nanomaterials. The kinds of nanoparticles that have recently been used in photodynamic therapy are mentioned in this article. Latest advancements are being explored in the use of inorganic nanoparticles and biodegradable polymer-based nanomaterial as carriers of photosynthetic agents. Photosynthetic nanoparticles, self-propagating nanoparticles, and conversion nanoparticles are among the successful photodynamic therapy nanoparticles addressed in this report.

Simultaneous quantitative analysis of Escherichia coli, Staphylococcus aureus and Salmonella typhimurium using surface-enhanced Raman spectroscopy coupled with partial least squares regression and artificial neural networks

Simultaneous detection of mixed bacteria accurately and sensitively is a major challenge in microbial quality control field. In this study, we proposed a label-free SERS technique coupled with partial least squares regression (PLSR) and artificial neural networks (ANNs) for quantitative analysis of Escherichia coli, Staphylococcus aureus and Salmonella typhimurium simultaneously. SERS-active and reproducible Raman spectra can be acquired directly upon the bacteria and Au@Ag@SiO₂ nanoparticle composites on the surface of gold foil substrates. After applying different preprocessing models, SERS-PLSR and SERS-ANNs quantitative analysis models were developed to map SERS spectra of concentrations of the Escherichia coli, Staphylococcus aureus and Salmonella typhimurium, respectively. Both models achieved high prediction accuracy and low prediction error, while the performance of SERS-ANNs model in both quality of fit (R² > 0.95) and accuracy of predictions (RMSE < 0.06) was superior to SERS-PLSR model. Therefore, it is feasible to develop simultaneous quantitative analysis of mixed pathogenic bacteria by proposed SERS methodology.

Mesoporous carbon nitride supported MgO for enhanced CO2 capture

The growing concern about the environmental consequences of anthropogenic CO2 emissions significantly stimulated the research of low-cost, efficient, and recyclable solid adsorbents for CO2 capture. In this work, a series of MgO-supported mesoporous carbon nitride adsorbents with different MgO contents (xMgO/MCN) was prepared using a facile process. The obtained materials were tested for CO2 capture from 10 vol% CO2 mixture gas with N2 using a fixed bed adsorber at atmospheric pressure. At 25 ºC, the bare MCN support and unsupported MgO samples demonstrated CO2 capture capacities of 0.99, and 0.74 mmol g-1, respectively, which were lower than those of the xMgO/MCN composites.The incorporation of MgO into the MCN improved the CO2 uptake, and the 20MgO/MCN exhibited the highest CO2 capture capacity of 1.15 mmol g-1 at 25 °C. The improved performance of the 20MgO/MCN nanohybrid can be possibly assigned to the presence of high content of highly dispersed MgO NPs along with its improved textural properties in terms of high specific surface area (215 m2g-1), large pore volume (0.22 cm3g-1), and abundant mesoporous structure. The efffects of temperature and CO2 flow rate were also investigated on the CO2 capture performance of 20MgO/MCN. Temperature was found to have a negative influence on the CO2 capture capacity of the 20MgO/MCN, which decreased from 1.15 to 0.65 mmol g-1with temperature rise from 25 C to 150º C, due to the endothermicity of the process. Similarly, the capture capacity decreased from 1.15 to 0.54 mmol g-1 with the increase of the flow rate from 50 to 200 ml minute-1 respectively. Importantly, 20MgO/MCN showed excellent reusability with consistent CO2 capture capacity over five sequential sorption-desorption cycles, suggesting its suitability for the practical capture of CO2.

Upregulation of RIPK1 implicates in HEK 293T cell death upon transient transfection of A53T-α-synuclein

BACKGROUND

Alpha-synuclein (α-SN) is the central protein in synucleinopathies including Parkinson's disease. Nevertheless, the molecular mechanisms through which α-SN leads to neuronal death remain unclear.

METHODS

To elucidate the relationship between α-SN and apoptosis, some indicators of the intrinsic and extrinsic apoptotic cell death were assessed in normal and a stable HEK293T cell line expressing firefly luciferase after transfection with the wild-type (WT) and A53T mutant α-SN.

RESULTS

Opposite to WT-α-SN, overexpression of A53T-α-SN resulted in enhanced expression of almost two fold for RIPK1 (93.0 %), FADD (45 %), Caspase-8, and Casp-9 activity (52.0 %) in measured time. Transfection of both WT-α-SN and A53T-α-SN showed an increase in the Casp-3/Procasp-3 ratio (WT: 60.5 %; A53T: 41.0 %), Casp-3 activity (WT: 65.0 %; A53T: 20.5 %), and a decrease in luciferase activity (WT: 50 %; A53T: 34.8 %). Overexpression of A53T-α-SN brought about with more cell death percentage compared to WT-α-SN within 36 h. No significant alteration in cytochrome c and reactive oxygen species release into cytosol were observed for both WT-α-SN and A53T-α-SN.

CONCLUSION

Altogether, these findings highlight the link between disease related mutants of α-SN (like A53T-α-SN) in triggering of RIPK1-dependent extrinsic apoptotic pathway in cell death during neurodegeneration.

Bioinspired Green Synthesis of Bimetallic Iron and Zinc Oxide Nanoparticles Using Mushroom Extract and Use against Aspergillus niger; The Most Devastating Fungi of the Green World

In the current study, a macro fungus was collected and identified by using morphological and molecular tools to study the ITS region, which has been described as a universal barcode marker during molecular investigation for the identification of fungi. Based on morphology and molecular evidence, the collected fungus was identified as Daedalea Mushroom. The identified fungus was used for the synthesis of Iron and ZnO nanoparticles as an eco-friendly agent for nanoparticle synthesis. The synthesized nanoparticles were confirmed by, Fourier transfer infrared spectroscopy analysis (FTIR), X-ray diffraction analysis (XRD), energy dispersive X-ray analysis (EDX), and scanning electron microscopy analysis (SEM). All these characterizations revealed the synthesis of Iron and ZnO NPs with an irregular shape and a size of 16.8 nm. The zinc oxide nanoparticles had a size in the range of 18.53 nm. Daedalea Mushroom was used for the first time to synthesize Iron and zinc nanoparticles. The mycosynthesized Iron and ZnO NPs were assessed as control agents at various dosage rates against the pathogenic fungus Aspergillus niger, which was isolated from an apple and identified using its morphology. At higher concentrations (0.75 mg/mL), the iron nanoparticles inhibited fungal growth by 72%, whereas at lower concentrations (0.25 mg/mL), they inhibited fungal growth by 60%. ZnO NPs showed good antifungal activity at different concentrations including growth inhibition at 0.25 mg/mL (88%), 1.0 mg/mL (68%), 0.75 mg/mL (75%), and 0.5 mg/mL (70%) concentrations of ZnO NPs. However, the maximum growth inhibition of ZnO NPs was observed at 0.25 mg/mL (88%) concentration and minimum growth inhibition at 0.1 mg/mL (22%). The current study concludes that Daedalea Mushroom works as a novel and eco-friendly source for the synthesis of Iron and ZnO NPs with prominent antifungal activities that can be further applied in different fields.

Organic chemical Nano sensors: synthesis, properties, and applications

Nanosensors work on the "Nano" scale. "Nano" is a unit of measurement around 10- 9 m. A nanosensor is a device capable of carrying data and information about the behavior and characteristics of particles at the nanoscale level to the macroscopic level. Nanosensors can be used to detect chemical or mechanical information such as the presence of chemical species and nanoparticles or monitor physical parameters such as temperature on the nanoscale. Nanosensors are emerging as promising tools for applications in agriculture. They offer an enormous upgrade in selectivity, speed, and sensitivity compared to traditional chemical and biological methods. Nanosensors can be used for the determination of microbe and contaminants. With the advancement of science in the world and the advent of electronic equipment and the great changes that have taken place in recent decades, the need to build more accurate, smaller and more capable sensors was felt. Today, high-sensitivity sensors are used that are sensitive to small amounts of gas, heat, or radiation. Increasing the sensitivity, efficiency and accuracy of these sensors requires the discovery of new materials and tools. Nano sensors are nanometer-sized sensors that, due to their small size and nanometer size, have such high accuracy and responsiveness that they react even to the presence of several atoms of a gas. Nano sensors are inherently smaller and more sensitive than other sensors.

Antimicrobial finishing of textiles using nanomaterials

Metals, such as copper and silver, can be extremely toxic to bacteria at exceptionally low concentrations. Because of this biocidal activity, metals have been widely used as antimicrobial agents in a multitude of applications related with agriculture, healthcare, and the industry in general. A large number of microorganisms live in the human environment. if the balance of these creatures in nature is disturbed, the health of the individual and society will be threatened due to the production and emission of unpleasant odors and the reduction of health standards. The presence of microorganisms on textiles can cause adverse effects such as discoloration or staining on textiles, decomposition of fibrous materials, reduced strength, and eventually decay of textiles. Most fibers and polymers do not show resistance to the effects of microbes and by providing growth factors for microorganisms such as the right temperature and humidity, nutrients from sweat and fat from skin glands, dead skin cells as well as materials used in the stage of finishing the textiles causes the rapid growth and spread of various microbes. With the advent of nanotechnology, various industries and human daily life underwent changes. In recent years, increasing research on nanoparticles has led to the production of textiles with greater efficiency and added value. These modified textiles prevent the spread of unpleasant odors, the spread, and transmission of diseases. This article reviews the basics and principles of antimicrobial tetiles, as well as a brief overview of antimicrobial materials and nanostructures with antimicrobial properties.

Synergistic activities of silver indium sulfide/nickel molybdenum sulfide nanostructures anchored on clay mineral for light-driven bactericidal performance, and detection of uric acid from gout patient serum

In this study, the hydrothermal method was used to synthesis of silver indium sulfide/nickel molybdenum sulfide (AgInS₂/NiMoS₄) nanostructure and decorated on Palygorskite (Plg) as an excellent carrier of antibacterial materials. The performance of the prepared AgInS₂/NiMoS₄/Plg composites was investigated for light-driven antibacterial process and detection of uric acid from biological samples. The result shows the highest antibacterial activity of the AgInS₂/NiMoS₄/Plg with the minimum inhibitory concentrations about 0.2-0.3 mg/mL. The prepared AgInS₂/NiMoS₄/Plg as sensor depicted enhanced peroxidase-like activity for detection of acid uric. The detection limit of acid uric by AgInS₂/NiMoS₄/Plg was about 26.1 nM. Therefore, the AgInS₂/NiMoS₄/Plg can be developed in the bactericidal process and sensing in complex biological systems.

Regulation Mechanism of ssDNA Aptamer in Nanozymes and Application of Nanozyme-Based Aptasensors in Food Safety

Food safety issues are a worldwide concern. Pathogens, toxins, pesticides, veterinary drugs, heavy metals, and illegal additives are frequently reported to contaminate food and pose a serious threat to human health. Conventional detection methods have difficulties fulfilling the requirements for food development in a modern society. Therefore, novel rapid detection methods are urgently needed for on-site and rapid screening of massive food samples. Due to the extraordinary properties of nanozymes and aptamers, biosensors composed of both of them provide considerable advantages in analytical performances, including sensitivity, specificity, repeatability, and accuracy. They are considered a promising complementary detection method on top of conventional ones for the rapid and accurate detection of food contaminants. In recent years, we have witnessed a flourishing of analytical strategies based on aptamers and nanozymes for the detection of food contaminants, especially novel detection models based on the regulation by single-stranded DNA (ssDNA) of nanozyme activity. However, the applications of nanozyme-based aptasensors in food safety are seldom reviewed. Thus, this paper aims to provide a comprehensive review on nanozyme-based aptasensors in food safety, which are arranged according to the different interaction modes of ssDNA and nanozymes: aptasensors based on nanozyme activity either inhibited or enhanced by ssDNA, nanozymes as signal tags, and other methods. Before introducing the nanozyme-based aptasensors, the regulation by ssDNA of nanozyme activity via diverse factors is discussed systematically for precisely tailoring nanozyme activity in biosensors. Furthermore, current challenges are emphasized, and future perspectives are discussed.

Ag doped Sn3O4 nanostructure and immobilized on hyperbranched polypyrrole for visible light sensitized photocatalytic, antibacterial agent and microbial detection process

Ag doped Sn₃O₄ Nanostructure and immobilized on hyperbranched polypyrrole is investigated in this project. The product was synthesized by the hydrothermal synthesis method. The surface and structural characteristics of the product was studied by different instrumental analysis. The fabricated nanocomposites was utilized as a nano photocatalyst in the removal of methylene blue dye. The crystallography results depicts the triclinic phase of Sn₃O₄ with the crystallite size 36.3 nm. The band gap of the Ag-Sn₃O₄/hyperbranched polypyrrole was found 1.50 eV from kubelka-munk measurements. The specific surface area was increased in the presence of the hyperbranched polypyrrole as compared to Ag-Sn₃O₄ samples. The photo-catalytic activity of composites was found 100.0% degradation of CR in 30 min under visible light irradiation. The catalytic kinetic was followed from the first kinetic model. Moreover, the Ag/Sn₃O₄/hyperbranched polypyrrole was applied as a bactericidal agent against Streptococcus pneumoniae, and Pseudomonas aeruginosa bacteria. Determination of Streptococcus pyogenes as a pathogenic bacteria was investigated by using aptamer/Ag/Sn₃O₄/hyperbranched polypyrrole in peroxidase activity. The detection limit of S. pyogenes was 71.0 CFU/mL by using the nano-aptamer.