Dual-emission ratiometric fluorescence probe based on copper nanoclusters for the detection of rutin and picric acid

An intelligent device with double fluorescent carbon dots based on smartphone for visual and point-of-care testing of Copper(II) in water and food samples

The excessive presence of Cu2+ could be harmful to human health. Therefore, a ratiometric fluorescence sensor based on multicolor fluorescent carbon dots (CDs) was developed for Cu2+ detection. The blue and yellow carbon dots (B-CDs/Y-CDs) were synthesized by one-step hydrothermal method. After adding Cu2+, it is captured by the amino groups of B-CDs to form complexes, resulting in a strong fluorescence quenching via photoinduced electron transfer (PET). Meanwhile, the amino groups from Y-CDs also binds with Cu2+ that inhibit the internal PET thus enhancing the fluorescence of Y-CDs. The sensor has the merits in rapid, visual, and selective with a low limit of detection (LOD) at 2.29 nM. Furthermore, an intelligent device composed of portable optical detector and smartphone is constructed, which realizes the visual point-of-care testing (POCT) of Cu2+ with a LOD of 7.51 nM. The strategy provides an accessible approach for monitoring heavy metal pollution and food safety.

Ligand-Induced Red-Emitting Copper Nanoclusters for Selective Fluorescence Determination of Aluminum Ions

Monitoring levels of excessive aluminum ions (Al3+) is crucial as it can harm the immune system, reduce enzyme activity, cause cell death, and damage environmental and biological systems. Developing a fast and efficient Al3+ ion determination method is the key to addressing this issue. In this work, red-emitting fluorescent copper nanoclusters (CuNCs) were synthesized using N-acetyl-l-cysteine (NAC) as a ligand and CuCl2·2H2O through a facile procedure. The NAC-CuNCs exhibited a large Stokes shift and displayed remarkable luminescence properties. A method for detecting Al3+ through a fluorescence probe was proposed. Its fluorescence mechanism was also explored. The probe showed rapid responsiveness (within 1 min) to Al3+ ion determination. The detection limit for Al3+ was found to be 19.7 nM, which is significantly lower than the WHO's value and most reports, with a linear range of 0-52.9 μM. The determination of Al3+ concentrations in actual water using the fluorescence probe yielded satisfactory outcomes. Moreover, the visual detection of Al3+ ions was also achieved through a smartphone, which can enhance its fast and practical detection.

A hydrogel sensor based on cellulose nanofiber/polyvinyl alcohol with colorimetric-fluorescent bimodality for non-invasive detection of urea in sweat

The concentration of urea in sweat serves as a valuable indicator of an individual's overall health. In this study, we present a novel hydrogel sensor (BAF-CPu), based on cellulose nanofiber and polyvinyl alcohol, designed to achieve non-invasive in situ and highly sensitive detection of urea in sweat by combining the dual-mode response of colorimetric and ratiometric fluorescence techniques. The bright red fluorescent gold‑copper bimetallic nanoclusters and green fluorescent fluorescein isothiocyanate-modified cellulose nanofibers endowed BAF-CPu with proportional fluorescence responsive properties. Under the catalytic action of urease, the hydrolysis of urea raises the pH, resulting in diminished red fluorescence along with enhanced green fluorescence, and the fluorescence color of BAF-CPu changes from red to green. Moreover, BAF-CPu hydrogel encapsulates pH-responsive bromothymol blue (BTB), which changes from yellow to blue in the presence of urea. Importantly, BAF-CPu absorbs sweat by adhering directly to the skin surface, avoiding the complicated sampling process and improving the maneuverability of the detection process. With both ratiometric fluorescence and colorimetric modes, BAF-CPu is not only able to detect sweat in situ, but also can reduce the interference of the complex sweat environment on the urea detection, and realize the high sensitivity detection of urea in sweat.

Rapid and reliable ratiometric fluorescence detection of isoquercitrin based on a high-nuclearity Zn(II)-Nd(III) nanomolecular sensor

Rapid and quantitative detection of isoquercitrin (Isq) has been attracting much attention due to its outstanding pharmacological and physiological activities. Herein, an interesting 48-metal Zn(II)-Nd(III) nanocluster (1, molecular sizes 1.3 × 2.8 × 3.1 nm) with salen-type Schiff base ligand was constructed as molecular sensor for the luminescence detection of Isq. 1 exhibits visible ligand-centered emission and NIR luminescence of Nd(III), and shows ratiometric fluorescence response to Isq with high sensitivity even in the presence of other interferences. The fluorescence sensing behavior can be expressed by a second-order equation I1060nm/I480nm = A*[Isq]2 + B*[Isq] + C, which is used to quantitatively analyze the Isq concentrations in DMF and FCS. The LODs to Isq for the ligand-centered and lanthanide emissions of 1 in DMF are 0.21 μM and 0.11 nM, respectively. The quenching of the ligand-centered emission of 1 caused by Isq is attributed to the competitive absorption of light energy and "inner effect", while, the luminescence enhancement is due to the "antenna effect".

Less interference fluorescence analytical strategy: Bridging substance-triggered ratiometric sensor with convenient preparation and application

High interference and narrow application range are key of bottleneck of recent fluorescence analysis methods, which limit their wide application in the sensing field. Therefore, to overcome these disadvantages, a ratiometric fluorescence sensing system utilizing berberine (BER) and silver nanoclusters protected by dihydrolipoic acid (DHLA-AgNCs) was constructed for the first time in this work, to achieve determination of BER and daunorubicin (Dau). BER aqueous solution (non-planar conformation) has no fluorescence emission. When it was mixed with DHLA-AgNCs, the conformation of BER became planar, producing fluorescence emission at 515 nm besides the fluorescence emission peak of DHLA-AgNCs at 653 nm. With the increase of BER concentration added in system, the fluorescence intensity of BER (planar conformation) at 515 nm increased obviously and the fluorescence intensity of DHLA-AgNCs decreased slightly. Therefore, the dual emission fluorescence sensing system was constructed based on a fluorescence substance and non fluorescence substance, to achieve determination of BER. Meanwhile, based on the bridging effect of BER and fluorescence resonance energy transfer effect from Dau, the altering of two peaks intensity was utilized to achieve determination of Dau. Thus, this dual emission sensing system can not only be used for fluorescence analysis of BER and its analogues, but also based on the bridging effect of BER, allowing the determination of Dau and its analogues that could not be directly measured with silver nanoclusters, expanding the application range of traditional dual emission detection systems. Meanwhile, this system has strong anti-interference ability and low toxicity to the human body and less pollution to the sample and environment. This provides a new direction and universal research strategy for the construction of new fluorescence sensing systems in the future for the analysis of target substances that cannot be directly detected with conventional fluorescence analysis methods.

A novel ethylene linkage-based covalent organic framework for turn-on fluorescence sensing for Al3+ with excellent selectivity and sensitivity

Covalent organic Framework (COFs) has become a new platform for functional research and material design. A novel covalent organic framework (CN-COF) was first synthesized with p-xylylene dicyanide and 2-hydroxy-1,3,5-benzenetrialdehyde through the Knoevenagel condensation reaction. CN-COF is a porous crystal material with strong thermal and chemical stability. CN-COF exhibits a selective "turn-on" fluorescence response to Al3+ in ethanol with blue-shifted emission spectra over the other tested metal ions. The color changes from pink to earth yellow, and the fluorescence effect is clearly visible. The fluorescence intensity of CN-COF was linearly related to the concentration of Al3+, and the detection limit was 1.815 μM. Importantly, CN-COF exhibits a satisfactory recovery for detecting Al3+ in drinking water and fish samples. CN-COF also showed the intuitive semi-quantitative detection ability for Al3+ via the color change with the naked eyes. The special pore structure is conducive to allow Al3+ enter to coordinate with O and N atoms on the wall of CN-COF scaffold. The revisable fluorescence change upon the selective addition of Al3+ and XRD, EDTA, XPS and DFT results demonstrated the complex process. The inhibition of the photoinduced electron transition from O atoms to Al3+ induced the fluorescence enhancement. This study not only presents a synthesis idea for a new structural organic framework, but also offers a highly selective and sensitive fluorescence chemical sensor for the identification and detection of Al3+.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

Selective determination of ellagic acid in aqueous solution using blue-green emissive copper nanoclusters

Development of beneficial sensors to analyze ellagic acid concentrations is of great importance for food safety and human health. Herein, a facile and fast fluorescent probe was carried out for the excellently selective and sensitive measurement of ellagic acid in real samples through histidine protected copper nanoclusters (histidine@Cu NCs) as a nanosensor. This as-developed histidine@Cu NCs were performed through UV-vis absorption spectroscopy, fluorescence spectroscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy and fluorescence lifetime analysis. The TEM image revealed that this nanomaterial had spherical features with the average diameter of 2.5 ± 0.05 nm. The blue-green fluorescence of this Cu NCs was found under the UV light. Meanwhile, the maximum excitation and emission wavelength were located at 387 nm and 488 nm. After addition of ellagic acid, the fluorescence of histidine@Cu NCs was slowly weakened with excellent linear range of 0.5-300 μM and detection limit of 0.077 μM. The fluorescence weakening mechanism of this nanosensor were attributed to the inner filter effect (IFE) and static quenching. Finally, this as-established analysis platform was successfully employed to measure ellagic acid in real samples.

Simultaneous fluorescence sensing of vitamin B2 and sulfur ions based on fluorescent copper nanoparticles

In this study, the F-CuNPs were synthesized by a modified liquid-phase chemical reduction method. Throughout the preparation process, anhydrous copper sulfate was used as the copper source, and ascorbic acid in the NaOH solution served as the reducing and protective agent. Förster resonance energy transfer (FRET) may exist between F-CuNPs and vitamin B2 due to the large spectral overlap between the fluorescence emission spectra of F-CuNPs and the UV-vis absorption spectra of vitamin B2. Therefore, the detection of vitamin B2 was designed based on a FRET system between F-CuNPs and vitamin B2. With S^2- into the F-CuNPs&VB2 system, the fluorescence intensity of vitamin B2 was quenched, while the fluorescence intensity of F-CuNPs was almost unchanged. There may be a specific reaction between S^2- and vitamin B2. Therefore, the research system can be further used to detect S^2- based on ratiometric fluorescent probe. The research findings show that the linear range of vitamin B2 was 0.51 nM-34.64 nM with a detection limit of 0.25 nM (S/N = 3), the linear range of S^2- was 0.64 μM-60.00 μM with a detection limit of 0.32 μM (S/N = 3). Furthermore, the simultaneous fluorescent sensing system has high sensitivity and selectivity. Therefore, this system was designed and successfully used to detect the content of vitamin B2 and S^2- in actual samples to find a new effective method to detect analytes.

A chiral fluorescent COF prepared by post-synthesis modification for optosensing of imazamox enantiomers

We report a post-synthesis modification for the preparation of a novel chiral fluorescent covalent organic framework (COF) for selective recognization of imazamox enantiomers. In this study, chiral COF was firstly synthesized via a Schiff-base reaction between 2,5-dihydroxyterephthalaldehyde (Dha) and 1,3,5-tris(4-aminophenyl)benzene (Tab) followed by a nucleophilic substitution using (1S)-(+)-10-camphorsulfonyl chloride as chiral modifier. The resulting regular spherical chiral COF Dha Tab not only presented the high optical efficiency, strong covalent bond structure, good crystallinity, large specific surface area but also showed the specific enantioselectivity and quick identification for imazamox enantiomers among five pesticide enantiomers (S/R-imazamox, acephate, acetochlor, propisochlor and metalaxyl). The detection limits for S- and R-imazamox were 4.20 μmol/L and 3.03 μmol/L, respectively. Meanwhile, the enantiomeric excess value (5.30 %) manifested that the chiral COF Dha Tab had the strong adsorption ability to imazamox enantiomers and more higher affinity for R-imazamox. This chiral fluorescent COF opened up a new way for the recognition of enantiomers.

Construction of a Near-Infrared Luminescent 48-Metal Rectangular Zn(II)-Yb(III) Nanocluster with Carbonate Templates for the Dual-Emissive Detection of Rutin as a Medicinal Ingredient

An interesting 48-metal Zn(II)-Yb(III) nanocluster (1) with a size of about 1.3 × 2.8 × 3.1 nm was constructed by carbonate templates from a Schiff base ligand. It exhibits ligand-centered emission and near-infrared (NIR) luminescence of Yb(III), which are used in the dual-emissive detection of rutin (Rut) with high sensitivity even in the presence of other interferences. The response behavior can be expressed by the second-order equation I_980 nm/I_510 nm = A*[Rut]² + B*[Rut] + C, and the limits of detection to Rut for the emissions of 1 are 2.23 μM and 0.20 nM.

A highly selective fluorescent sensor for chlortetracycline based on histidine-templated copper nanoclusters

In this study, histidine-protected copper nanoclusters (Cu NCs@His) were established by using a one-pot method, which histidine and ascorbic acid were applied as the template and reducing agent, respectively. The as-developed Cu NCs@His endued green emission wavelength at 494 nm with the excitation of 378 nm. The Cu NCs@His exhibited green fluorescence under UV light (365 nm). Using Cu NCs@His as a pattern nanosensor, the fluorescent "turn off" mechanism was fabricated for the determination of chlortetracycline in the light of the linear decrease of fluorescence intensities around 494 nm. The chlortetracycline conducted as a quencher, leading to reveal an excellent linear relationship between ln(F₀/F) of Cu NCs@His and chlortetracycline concentrations with the range of 0.5-200 μM, and the detection limit was 0.876 μM. The fluorescence quenching of Cu NCs@His revealed excellent selectivity for chlortetracycline over other potential interfering substances in the human body. This strategy was exhibited to be a convenient sensing platform for the detection of chlortetracycline in real medical samples, which could unfold a brand new and direct system for the sensing of chlortetracycline in real samples.

Construction of ratiometric Si-Mn:ZnSe nanoparticles for the immunoassay of SARS-CoV-2 spike protein

The continuing global spread of Coronavirus Disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) infection, has led to an unprecedented global health crisis. Effective and affordable methods are needed to diagnose SARS-CoV-2 infection. In this work, a ratiometric fluorescence probe, Si-Mn:ZnSe nanoparticles, was constructed through the electrostatic interaction between Si dots and Mn:ZnSe QDs, and the fluorescence of Mn:ZnSe QDs has a specifical response to H₂O₂. An immunocomplex was formed by the recognition of capture antibody/spike (S) protein/spike neutralizing antibody/biotinylated second antibody/streptavidin/biotinylated catalase (CAT). In the presence of S protein, CAT effectively catalyzed the decomposition of H₂O₂ in the system, and the fluorescence of Mn:ZnSe QDs was not specifically quenched. Based on this principle, a ratiometric immunoassay of SARS-CoV-2 S protein was established. The sensitivity of the proposed ELISA method was comparable to that of the commercial kit. In addition, this method can effectively distinguish the pseudo-SARS-CoV-2 virus and other pseudovirus. Therefore, this method provided a reliable and potential direction for diagnosing SARS-CoV-2 infection.

Synthesis of Copper Nanoclusters and Their Application for Environmental Pollutant Probes: A Review

Copper nanoclusters (CuNCs) as a new type of probe for environmental contaminants are gaining increasing attention because of its low cost, superior water dispersibility, wide availability and excellent optical properties. Compared with the other probes such as quantum dots and organic dyes, CuNCs show much more potential in practical application for their excellent photostability, large Stokes shift, low toxicity and other preponderance, especially in the fields of biosensing and environmental monitoring. Recently, the template-assisted synthesis of metal nanoclusters (MNCs) has been widely studied. A variety of templates such as proteins, small thiol molecules, polymers, and DNA with different spatial configuration have been used for the preparation of MNCs so far. This review primarily described recent advances in CuNCs in terms of the synthesis of CuNCs from different templates, the methods to improve the fluorescence (FL) properties of CuNCs, as well as the basic detection mechanisms based on the FL properties or catalytic properties. Finally, to promote the practical application of CuNCs probes, the challenges and prospects of CuNCs multifunctional probes are also discussed.

Water Soluble Silicon Nanoparticles as a Fluorescent Probe for Highly Sensitive Detection of Rutin

In this work, water-soluble fluorescent silicon nanoparticles (SiNPs) were prepared by one-pot hydrothermal method using 3-(2-aminoethylamino)propyldimethoxymethylsilane (AEAPDMMS) as a silicon source and amidol as a reducing agent. The prepared SiNPs showed bright green fluorescence, excellent stability against photobleaching, salt tolerance, temperature stability, and good water solubility. Due to the internal filtration effect (IFE), rutin could selectively quench the fluorescence of the SiNPs. Based on such phenomena, a highly sensitive fluorescence method was established for rutin detection. The linear range and limit of detection (LOD) were 0.05-400 μM and 15.2 nM, respectively. This method was successfully applied to detect rutin in the samples of rutin tablets, Sophora japonica, fry Sophora japonica, and S. japonica carbon with satisfactory recovery.