One-step synthesis of blue emission copper nanoclusters for the detection of furaltadone and temperature

Developing an off-on fluorescence sensor based on red copper nanoclusters wrapped by sulfhydryl and polymer double ligands for sensitive detection of N-acetyl-L-cysteine

N-acetyl-L-cysteine (NAC) as a class of thiols is commonly used in the treatment of lung diseases, detoxification and prevention of liver damage. In this paper, 4-mercaptobenzoic acid (4-MBA) coated and polyvinylpyrrolidone (PVP) attached copper nanoclusters (4-MBA@PVP-CuNCs) were successfully synthesized using a simple one-pot method with an absolute quantum yield of 10.98 %, and its synthetic conditions (like effects of single/double ligands and temperature) were studied intensively. Then Hg2+ could quench the fluorescence of the 4-MBA@PVP-CuNCs and its fluorescence was restored with the addition of NAC. Based on the above principles, an off-on switching system was established to detect NAC. That is, the 4-MBA@PVP-CuNCs-Hg probe was prepared by adding Hg2+ to switch off the fluorescence of the CuNCs by static quenching, and then NAC was added to switch on the fluorescence of the probe based on the chelation of NAC and Hg2+. Moreover, the effects of metal ion types and mercury ion doses for the probe construction were also further discussed. The method showed excellent linearity in the range of 0.05-1.25 µM and low detection limit of 16 nM. Meanwhile, good recoveries in real urine, tablets and pellets were observed, which proved the reliability of the method and provided a convenient, fast and sensitive method for NAC detection.

A facile synthesis of water-soluble copper nanoclusters as label-free fluorescent probes for rapid, selective and sensitive determination of alizarin red

Copper nanoclusters (FA@CuNCs) emitting blue fluorescence were successfully developed via a one-pot technique. In this method, the copper chloride, folic acid and hydrazine hydrate were applied as a precursor, protective agent and reducing agent, respectively. The absorption, fluorescence excitation and emission spectra of FA@CuNCs were carried out by using ultraviolet-visible and fluorescence spectrometry, respectively. The morphology, particle size, functional groups, oxidation states of elements of FA@CuNCs were discussed via using transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The stability of FA@CuNCs was studied under various conditions, such as storage time at 25 ℃, ultraviolet radiation time, sodium chloride solutione and pH. The FA@CuNCs displayed blue fluorescence under the excitation wavelength of 361 nm, and the fluorescence quantum yield was 7.45 %. As a result of the inner filter effect, the alizarin red could significantly weaken the blue fluorescence of FA@CuNCs. Thus, the as-prepared FA@CuNCs could be utilized as fluorescence nanosensors for the trace determination of alizarin red. This platform suggested an excellent linear range for alizarin red varying from 0.5 to 200 μM with a fitting coefficient of 0.9955. The detection limit was calculated to be 0.064 μM in the light of the 3b/k (b and k refer to the standard deviation and slope of fitted curve, respectively). Furthermore, the as-developed FA@CuNCs could be used to detect the alizarin red in real samples and for the sensing of temperature.

Ligand-Induced Red-Emitting Copper Nanoclusters for Selective Fluorescence Determination of Aluminum Ions

Monitoring levels of excessive aluminum ions (Al3+) is crucial as it can harm the immune system, reduce enzyme activity, cause cell death, and damage environmental and biological systems. Developing a fast and efficient Al3+ ion determination method is the key to addressing this issue. In this work, red-emitting fluorescent copper nanoclusters (CuNCs) were synthesized using N-acetyl-l-cysteine (NAC) as a ligand and CuCl2·2H2O through a facile procedure. The NAC-CuNCs exhibited a large Stokes shift and displayed remarkable luminescence properties. A method for detecting Al3+ through a fluorescence probe was proposed. Its fluorescence mechanism was also explored. The probe showed rapid responsiveness (within 1 min) to Al3+ ion determination. The detection limit for Al3+ was found to be 19.7 nM, which is significantly lower than the WHO's value and most reports, with a linear range of 0-52.9 μM. The determination of Al3+ concentrations in actual water using the fluorescence probe yielded satisfactory outcomes. Moreover, the visual detection of Al3+ ions was also achieved through a smartphone, which can enhance its fast and practical detection.

One-Pot facile synthesis of fluorescent copper nanoclusters for highly selective and sensitive detection of tetracycline

Due to the excellent characteristics, fluorescent copper nanoclusters (Cu NCs) have aroused great interest in recent years. Herein, the simple prepared, environmentally friendly fluorescent Cu NCs were synthesized by using trypsin as the stabilizer and applied for the determination of tetracycline. Uniformly dispersed Try-Cu NCs were obtained with average size of 3.5 ± 0.3 nm and some excellent merits of good water solubility, UV light stability and salt stability. Emission peaks around 460.0 nm were visibly quenched by tetracycline based on static quenching mechanism and inner filter effect (IFE). Two excellent linear relationships were observed between ln(F0/F) and tetracycline concentrations in the range of 1-100 μM and 100-300 μM with limit of detection (LOD) of 0.084 μM. Meanwhile, this nanoprobe exhibited an apparent selectivity for tetracycline detection. Moreover, Try-Cu NCs were successfully employed to determine tetracycline in serum and milk samples after facile pretreatment with satisfactory recovery rates and credible standard deviation. The results suggested that this as-prepared Try-Cu NCs had excellent application prospects in the future.

Selective determination of ellagic acid in aqueous solution using blue-green emissive copper nanoclusters

Development of beneficial sensors to analyze ellagic acid concentrations is of great importance for food safety and human health. Herein, a facile and fast fluorescent probe was carried out for the excellently selective and sensitive measurement of ellagic acid in real samples through histidine protected copper nanoclusters (histidine@Cu NCs) as a nanosensor. This as-developed histidine@Cu NCs were performed through UV-vis absorption spectroscopy, fluorescence spectroscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy and fluorescence lifetime analysis. The TEM image revealed that this nanomaterial had spherical features with the average diameter of 2.5 ± 0.05 nm. The blue-green fluorescence of this Cu NCs was found under the UV light. Meanwhile, the maximum excitation and emission wavelength were located at 387 nm and 488 nm. After addition of ellagic acid, the fluorescence of histidine@Cu NCs was slowly weakened with excellent linear range of 0.5-300 μM and detection limit of 0.077 μM. The fluorescence weakening mechanism of this nanosensor were attributed to the inner filter effect (IFE) and static quenching. Finally, this as-established analysis platform was successfully employed to measure ellagic acid in real samples.

Preparation of blue fluorescent copper nanoclusters for sensitive and selective sensing of apigenin in pharmaceutical samples

One-pot means was performed for the rapid preparation of copper nanoclusters (Cu NCs), which were employed as a fluorescence system for the sensitive apigenin measurement in pharmaceutical samples. Herein, CuCl₂ aqueous solution was reduced to Cu NCs through ascorbic acid and the Cu NCs were protected through trypsin under 65 ℃ for 4 h. The entire preparation process was rapid, facile and environmentally friendly. The trypsin-capped Cu NCs were demonstrated through ultraviolet-visible spectroscopy, fluorescence spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and fluorescence lifetime, respectively. The Cu NCs revealed blue fluorescence with emission wavelength around 465 nm under the excitation wavelength of 380 nm. The fluorescence weakening feature of Cu NCs with apigenin was observed. On this basis, a facile and sensitive turn-off fluorescent nanoprobe for the sensing of apigenin in real samples was developed. The logarithm of relative fluorescence intensity revealed a good linear relationship with apigenin contents from 0.5 μM to 300 μM with the detection limit of 0.079 μM. The Cu NCs-based fluorescent nanosensor have been employed to measure the apigenin amounts in real samples such as medical saline, bovine and human serum. The results revealed excellent potential of this Cu NCs-based fluorescent nanoprobe for the convention computation of apigenin amounts in real samples.