Rapid determination of isepamicin by using SERS based on BSA-protected AgNPs modified by α-Fe2O3

Development of aptamer surface-enhanced Raman spectroscopy sensor based on Fe3O4@Pt and Au@Ag nanoparticles for the determination of acetamiprid

As a common chlorinated nicotinic pesticide with high insecticidal activity, acetamiprid has been widely used for pest control. However, the irrational use of acetamiprid will pollute the environment and thus affect human health. Therefore, it is crucial to develop a simple, highly sensitive, and rapid method for acetamiprid residue detection. In this study, the capture probe (Fe3O4@Pt-Aptamer) was connected with the signal probe (Au@DTNB@Ag CS-cDNA) to form an assembly with multiple SERS-enhanced effects. Combined with magnetic separation technology, a SERS sensor with high sensitivity and stability was constructed to detect acetamiprid residue. Based on the optimal conditions, the SERS intensity measured at 1333 cm-1 is in relation to the concentration of acetamiprid in the range 2.25 × 10-9-2.25 × 10-5 M, and the calculated limit of detection (LOD) was 2.87 × 10-10 M. There was no cross-reactivity with thiacloprid, clothianidin, nitenpyram, imidacloprid, and chlorpyrifos, indicating that this method has good sensitivity and specificity. Finally, the method was applied to the detection of acetamiprid in cucumber samples, and the average recoveries were 94.19-103.58%, with RSD < 2.32%. The sensor can be used to analyse real samples with fast detection speed, high sensitivity, and high selectivity.

Sensitive detection of dextromethorphan hydrobromide based on portable Raman spectrometer and CuO@AgNPs nano composite SERS substrate

A highly sensitive surface-enhanced Raman spectroscopy approach was established for the detection of dextromethorphan hydrobromide (DXM) utilizing nano CuO modified silver nanoparticles (CuO@AgNPs) as substrate. Ultraviolet visible spectra (UV-vis), X-ray diffraction (XRD) and transmission electron microscopy (TEM) characterized the synthesized CuO@AgNPs. UV-vis and fourier transform infrared (FT-IR) were adopted to investigate the interaction between DXM and CuO@AgNPs. The optimal experimental conditions (the dosages of CuO@AgNPs and NaCl as well as mixing time) were explored. The enhancement factor (EF) was 1.71 × 106. The linear relationship between SERS intensity and the concentration of DXM in the range of 67 - 1000 nmol L-1 was obtained as ISERS = 25.81 c + 40398.77, and the limit of detection (LOD) was 2.12 nmol L-1 (S/N = 3). The interference of K+, Mg2+, Zn2+, Ca2+, Cu2+, Fe3+, glucose, HSA, L-tryptophan, soluble starch and ibuprofen were investigated. The method was successfully applied to test DXM in serum samples. The recovery was 99.06% - 101.51% with the relative standard deviation (RSD) of 0.74% - 3.87%.

Detection of organic dyes using Ag NPAs/SMP SERS substrate produced via sandpaper template-assisted lithography and liquid-liquid interface self-assembly

Surface-enhanced Raman spectroscopy (SERS) is a highly sensitive and reliable fingerprinting technique. However, its analytical capability is closely related to the quality of a SERS substrate used for the analysis. In particular, conventional colloidal substrates possess disadvantages in terms of controllability, stability, and reproducibility, which limit their application. In order to address these issues, a simple, cost-effective, and efficient SERS substrate based on silver nanoparticle arrays (Ag NPAs) and sandpaper-molded polydimethylsiloxane (SMP) was proposed in this work. Successfully prepared via template lithography and liquid-liquid interface self-assembly (LLISA), the substrate can be applied to the specific detection of organic dyes in the environment. The substrate exhibited good SERS performance, and the limit of detection (LOD) of rhodamine 6G (R6G) was shown to be 10-7 M under the optimal conditions (1000 grit sandpaper) with a relative standard deviation (RSD) of 7.76%. Moreover, the SERS signal intensity was maintained at 60% of the initial intensity after the substrate was stored for 30 days. In addition, the Ag NPAs/SMP SERS substrate was also employed to detect crystal violet (CV) and methylene blue (MB) with the LODs of 10-6 M and 10-7 M, respectively. In summary, the Ag NPAs/SMP SERS substrate prepared in this study has great potential for the detection of organic dyes in ecological environments.