Novel highly selective fluorescence sensing strategy for Mercury(Ⅱ) in water based on nitrogen-doped carbon quantum dots

Highly sensitive detection of mercury ions in aqueous solutions by laser-induced fluorescence spectroscopy

Laser-induced fluorescence spectroscopy was used to detect mercury ions in aqueous solutions, in which CH-95 resin was used to chelate the ions to transform the liquid samples into solid ones. The experimental results showed that the fluorescence emission of the chelated solid-state samples excited by a low-power semiconductor laser at the wavelength of 447 nm was significantly enhanced due to the chelating reaction. The fluorescence intensity was proportional to the concentration of mercury ions with a linear correlation coefficient of R2  = 0.994, and the limit of detection was 0.117 ng/L, which was about 10,000 times lower than the permissible level of 1 µg/L for Hg(II) in drinking water. The method greatly improved the sensitivity for the detection of Hg in aqueous solutions.

Rapid detection of Hg2+ in an ON-OFF-ON process using N doped carbon dots

Contamination of ground water with pollutants released from various anthropogenic activities is a major concern due to its adverse effects on the environment and human health. Rapid and efficient detection of such pollutants is the first step toward remediation of the problem. Herein we report a two-point fluorescence turn OFF-ON detection method for Hg2+ ions using nitrogen doped carbon dots (NCDs). The NCDs obtained through solvothermal treatment of ammonium citrate tribasic in DMF at 190 °C for four hours exhibited a quantum yield of 9.67%. Hg2+ detection is demonstrated in two steps, first the quenching of the fluorescence of NCDs by Hg2+ and second the fluorescence recovery upon addition of ascorbic acid from different sources. A rapid filter paper-based detection device is demonstrated based on the principles developed.

The fabrication of a hybrid fluorescent nanosensing system and its practical applications via film kits for the selective determination of mercury ions

Heavy metal ions especially mercury exposure have severe toxic effects on living organisms and human health. Therefore, easy, accessible, and accurate determination strategies for the selective specification of mercury ions are essential for numerous disciplines. In the presented paper, new hybrid fluorescent iron oxide nanoparticles labeled with carbazole and triazole units (CT-IONP) were prepared via surface modification for the spectrofluorimetric determination of Hg2+ in environmental samples. The structure of the new sensing system is characterized via various spectroscopic, thermal, and microscopic techniques. Under optimized conditions, the hybrid system is not only used in fully water media but also highly fluorescent which led to the "turn-off" response towards Hg2+ ion in the presence of various competitive species. The presented sensing system was successfully used for the determination of Hg2+ ions in the wide linear working range (0.02-10.00 µmol.L-1) at nanomolar levels, where the limit of detection and quantification were calculated as 7.38 and 22.14 nmol.L-1. Importantly, the practical application of hybrid material was applied by CT-IONP embedded polycaprolactone (PCL) polymer film kits. The bluish color of fabricated film kits was instantly and dramatically turned colorless-dark patterns after the addition of Hg2+ ions, which resulted in convenient and rapid film test kits for selective detection.

A Simple Method for Synthesizing Nitrogen-Doped Carbon Quantum Dots for Fluorescent "Turn off" Mercury (II) Ion Sensing

Here, straightforward and environmentally friendly fluorescent nitrogen doped carbon quantum dots (N-CQDs) with a high blue fluorescence emission at 455 nm are used for ultrasensitive Hg2+ ion detection. Folic acid and urea are used as carbon sources in the carbonization process. Two broad absorption bands at around 280 and 370 nm from UV-Vis spectrum and characteristic absorption peaks from infrared spectrum confirms the successful synthesis of the N-CQDs. Energy dispersive X-Ray analysis confirmed the elemental composition of the N-CQDs. Transmission electron microscopy showed the homogeneous globular morphology of the N-CQDs with an average particle size of 65 nm. Zeta potential measurement established the stability and surface charge of N-CQDs. Dynamic light scattering measurement showed the average size of N-CQDs. With the addition of Hg2+ ion to N-CQDs, the blue fluorescence emission is quenched. Moreover, the N-CQDs can be applied to real water sample such as pond water, river water, and tap water. The detection limit is approximately calculated to be 12 nM and linear range is 0-30 parts per billion.

Construction Strategy and Mechanism of a Novel Wood Preservative with Excellent Antifungal Effects

Wood is a naturally porous material prone to microbial erosion and degradation in outdoor environments. Therefore, the development of an environmentally friendly wood preservative with excellent antibacterial effects and low toxicity is urgently needed. In this study, nitrogen-doped carbon quantum dots (N-CQDs) with excellent antifungal performance and fluorescent properties were synthesized using a one-step hydrothermal method with chitosan quaternary ammonium salt (HACC) as the raw material. The fluorescence characteristics of N-CQD preservatives can help track their position and distribution in wood. The minimum inhibitory concentration (MIC) of N-CQDs is 1.8 mg/mL, which was nearly 22 times lower than that of HACC (40.0 mg/mL) in the PDA medium. The decay resistance test demonstrated that wood treated with N-CQDs showed a considerably reduced decay degree and its mass loss rate decreased from 46 ± 0.5% to 3.8 ± 0.5%. Biological transmission electron microscopy revealed that N-CQDs effectively destroyed fungal cell structures, thereby hindering the growth of Coriolus versicolor. N-CQDs synthesized using the one-step hydrothermal method can be used as an efficient wood preservative that can effectively improve the utilization and service life of wood.

Recent Development in Fluorescent Probes for the Detection of Hg2+ Ions

Mercury, a highly toxic heavy metal, poses significant environmental and health risks, necessitating the development of effective and responsive techniques for its detection. Organic chromophores, particularly small molecules, have emerged as promising materials for sensing Hg2+ ions due to their high selectivity, sensitivity, and ease of synthesis. In this review article, we provide a systematic overview of recent advancements in the field of fluorescent chemosensors for Hg2+ ions detection, including rhodamine derivatives, Schiff bases, coumarin derivatives, naphthalene derivatives, BODIPY, BOPHY, naphthalimide, pyrene, dicyanoisophorone, bromophenol, benzothiazole flavonol, carbonitrile, pyrazole, quinoline, resorufin, hemicyanine, monothiosquaraine, cyanine, pyrimidine, peptide, and quantum/carbon dots probes. We discuss their detection capabilities, sensing mechanisms, limits of detection, as well as the strategies and approaches employed in their design. By focusing on recent studies conducted between 2022 and 2023, this review article offers valuable insights into the performance and advancements in the field of fluorescent chemosensors for Hg2+ ions detection.

A portable smartphone-assisted digital image fluorimetry for analysis of methiocarb pesticide in vegetables: Nitrogen-doped carbon quantum dots as a sensing probe

The increasing use of pesticides in the agriculture fields strengthen the crop production to meet the needs of increasing population. The residues in water and food materials cause several health hazards. Herein, nitrogen-doped carbon quantum dot (N-CQDs) is designed for determination of methiocarb pesticide in vegetables by fluorescent paper sensor and compared the results with fluorimetry. The fluorescent paper-based detection is performed by recording the change in fluorescence of N-CQDs with introduction of methiocarb using smartphone and ImageJ software. Good linear range was acquired for analysis of methiocarb from 10 to 1000 μgL^-1 with a low detection limit (LOD) of 3.5 μgL^-1 in fluorimetry; and 700-10,000 μgL^-1 with a LOD of 500 μgL^-1 in fluorescent paper sensor. A better recovery from 92.0 to 95.4% illustrating the selectivity of both methods for analysis of methiocarb in vegetables. Thus, the advantage of using N-CQDs as a fluorescent sensor for analysis of methiocarb in vegetables is instrument free, portable and user-friendly.