Cooperation of oxygen vacancies and 2D ultrathin structure promoting CO2 photoreduction performance of Bi4Ti3O12

Defect Engineering of Bi2WO6 for Enhanced Photocatalytic Degradation of Antibiotic Pollutants

Infiltration of excessive antibiotics into aquatic ecosystems plays a significant role in antibiotic resistance, a major global health challenge. It is therefore critical to develop effective technologies for their removal. Herein, defect-rich Bi2WO6 nanoparticles are solvothermally prepared via epitaxial growth on pristine Bi2WO6 seed nanocrystals, and the efficiency of the photocatalytic degradation of ciprofloxacin, a common antibiotic, is found to increase markedly from 62.51% to 98.27% under visible photoirradiation for 60 min. This is due to the formation of a large number of structural defects, where the synergistic interactions between grain boundaries and adjacent dislocations and oxygen vacancies lead to an improved separation and migration efficiency of photogenerated carriers and facilitate the adsorption and degradation of ciprofloxacin, as confirmed in experimental and theoretical studies. Results from this work demonstrate the unique potential of defect engineering for enhanced photocatalytic performance, a critical step in removing antibiotic contaminants in aquatic ecosystems.

Charge redistribution of a spatially differentiated ferroelectric Bi4Ti3O12 single crystal for photocatalytic overall water splitting

Artificial photosynthesis is a promising approach to produce clean fuels via renewable solar energy. However, it is practically constrained by two issues of slow photogenerated carrier migration and rapid electron/hole recombination. It is also a challenge to achieve a 2:1 ratio of H2 and O2 for overall water splitting. Here we report a rational design of spatially differentiated two-dimensional Bi4Ti3O12 nanosheets to enhance overall water splitting. Such a spatially differentiated structure overcomes the limitation of charge transfer across different crystal planes in a single crystal semiconductor. The experimental results show a redistribution of charge within a crystal plane. The resulting photocatalyst produces 40.3 μmol h-1 of hydrogen and 20.1 μmol h-1 of oxygen at a near stoichiometric ratio of 2:1 and a solar-to-hydrogen efficiency of 0.1% under simulated solar light.

Preferential growth and electron trap synergistically promoting photoreduction CO2 of Tm ion doping bismuth titanate nanosheets

In this study, we prepared two-dimensional Bi4Ti3O12 nanosheets doped with rare earth ions. The experimental results show that Bi4-xTmxTi3O12 exhibits the highest reduction performance among various rare earth doped Bi4Ti3O12 materials, with a CO yield of 7.25 μmol g-1h-1. Furthermore, a delayed reaction in Bi3.97Tm0.03Ti3O12 is observed upon a cessation of light irradiation. Theoretical calculations reveal that the introduction of Tm ion not only reduces the surface energy of (001) plane and make it preferential growth in Bi4Ti3O12, but also brings the intervening energy level of Tm ion (4f and 4d mixed orbital), which is closer to the conduction band of Bi4Ti3O12 and facilitates charge carrier accumulation in trap states. The electrons retained in the shallow traps promote the hysteresis reaction following a cessation of illumination. This work provides further insights into elucidating precise reduction reaction mechanisms underlying rare earth dopant on photocatalysts. This research provides enhanced insights into unraveling the precise reduction reaction mechanisms influenced by rare earth dopants in photocatalysts.

2D Atomic Layers for CO2 Photoreduction

Artificial photosynthesis can convert carbon dioxide into high value-added chemicals. However, due to the poor charge separation efficiency and CO2 activation ability, the conversion efficiency of photocatalytic CO2 reduction is greatly restricted. Ultrathin 2D photocatalyst emerges as an alternative to realize the higher CO2 reduction performance. In this review, the basic principle of CO2 photoreduction is introduced, and the types, advantages, and advances of 2D photocatalysts are reviewed in detail including metal oxides, metal chalcogenides, bismuth-based materials, MXene, metal-organic framework, and metal-free materials. Subsequently, the tactics for improving the performance of 2D photocatalysts are introduced in detail via the surface atomic configuration and electronic state tuning such as component tuning, crystal facet control, defect engineering, element doping, cocatalyst modification, polarization, and strain engineering. Finally, the concluding remarks and future development of 2D photocatalysts in CO2 reduction are prospected.

Research progress on photocatalytic reduction of CO2 based on ferroelectric materials

Transforming CO2 into renewable fuels or valuable carbon compounds could be a practical means to tackle the issues of global warming and energy crisis. Photocatalytic CO2 reduction is more energy-efficient and environmentally friendly, and offers a broader range of potential applications than other CO2 conversion techniques. Ferroelectric materials, which belong to a class of materials with switchable polarization, are attractive candidates as catalysts due to their distinctive and substantial impact on surface physical and chemical characteristics. This review provides a concise overview of the fundamental principles underlying photocatalysis and the mechanism involved in CO2 reduction. Additionally, the composition and properties of ferroelectric materials are introduced. This review expands on the research progress in using ferroelectric materials for photocatalytic reduction of CO2 from three perspectives: directly as a catalyst, by modification, and construction of heterojunctions. Finally, the future potential of ferroelectric materials for photocatalytic CO2 reduction is presented. This review may be a valuable guide for creating reasonable and more effective photocatalysts based on ferroelectric materials.

One-dimensional single atom arrays on ferroelectric nanosheets for enhanced CO2 photoreduction

Single-atom catalysts show excellent catalytic performance because of their coordination environments and electronic configurations. However, controllable regulation of single-atom permutations still faces challenges. Herein, we demonstrate that a polarization electric field regulates single atom permutations and forms periodic one-dimensional Au single-atom arrays on ferroelectric Bi4Ti3O12 nanosheets. The Au single-atom arrays greatly lower the Gibbs free energy for CO2 conversion via Au-O=C=O-Au dual-site adsorption compared to that for Au-O=C=O single-site adsorption on Au isolated single atoms. Additionally, the Au single-atom arrays suppress the depolarization of Bi4Ti3O12, so it maintains a stronger driving force for separation and transfer of photogenerated charges. Thus, Bi4Ti3O12 with Au single-atom arrays exhibit an efficient CO production rate of 34.15 µmol·g-1·h-1, ∼18 times higher than that of pristine Bi4Ti3O12. More importantly, the polarization electric field proves to be a general tactic for the syntheses of one-dimensional Pt, Ag, Fe, Co and Ni single-atom arrays on the Bi4Ti3O12 surface.

Efficient solar-driven CO2-to-fuel conversion via Ni/MgAlO x @SiO2 nanocomposites at low temperature

Solar-driven CO2-to-fuel conversion assisted by another major greenhouse gas CH4 is promising to concurrently tackle energy shortage and global warming problems. However, current techniques still suffer from drawbacks of low efficiency, poor stability, and low selectivity. Here, a novel nanocomposite composed of interconnected Ni/MgAlO x nanoflakes grown on SiO2 particles with excellent spatial confinement of active sites is proposed for direct solar-driven CO2-to-fuel conversion. An ultrahigh light-to-fuel efficiency up to 35.7%, high production rates of H2 (136.6 mmol min-1g- 1) and CO (148.2 mmol min-1g-1), excellent selectivity (H2/CO ratio of 0.92), and good stability are reported simultaneously. These outstanding performances are attributed to strong metal-support interactions, improved CO2 absorption and activation, and decreased apparent activation energy under direct light illumination. MgAlO x @SiO2 support helps to lower the activation energy of CH* oxidation to CHO* and improve the dissociation of CH4 to CH3* as confirmed by DFT calculations. Moreover, the lattice oxygen of MgAlO x participates in the reaction and contributes to the removal of carbon deposition. This work provides promising routes for the conversion of greenhouse gasses into industrially valuable syngas with high efficiency, high selectivity, and benign sustainability.

Gradient tungsten-doped Bi3TiNbO9 ferroelectric photocatalysts with additional built-in electric field for efficient overall water splitting

Bi3TiNbO9, a layered ferroelectric photocatalyst, exhibits great potential for overall water splitting through efficient intralayer separation of photogenerated carriers motivated by a depolarization field along the in-plane a-axis. However, the poor interlayer transport of carriers along the out-of-plane c-axis, caused by the significant potential barrier between layers, leads to a high probability of carrier recombination and consequently results in low photocatalytic activity. Here, we have developed an efficient photocatalyst consisting of Bi3TiNbO9 nanosheets with a gradient tungsten (W) doping along the c-axis. This results in the generation of an additional electric field along the c-axis and simultaneously enhances the magnitude of depolarization field within the layers along the a-axis due to strengthened structural distortion. The combination of the built-in field along the c-axis and polarization along the a-axis can effectively facilitate the anisotropic migration of photogenerated electrons and holes to the basal {001} surface and lateral {110} surface of the nanosheets, respectively, enabling desirable spatial separation of carriers. Hence, the W-doped Bi3TiNbO9 ferroelectric photocatalyst with Rh/Cr2O3 cocatalyst achieves an efficient and durable overall water splitting feature, thereby providing an effective pathway for designing excellent layered ferroelectric photocatalysts.

Remarkably enhanced catalytic performance in CoOx/Bi4Ti3O12 heterostructures for methyl orange degradation via piezocatalysis and piezo-photocatalysis

A novel heterojunction composite of CoOx/Bi4Ti3O12 was synthesized through a combination of molten salt and photodeposition methods. The optimal sample exhibited superior performance in the piezocatalytic degradation of methyl orange (MO) dye with a degradation rate of 1.09 h-1, which was 2.4 times higher than that of pristine Bi4Ti3O12. Various characterizations were conducted to reveal the fundamental nature accountable for the outstanding piezocatalytic performance of CoOx/Bi4Ti3O12. The investigation of the band structure indicated that the CoOx/Bi4Ti3O12 composite formed a type-I p-n heterojunction structure, with CoOx acting as a hole trapper to effectively separate and transfer piezogenerated carriers. Significantly, the MO degradation rate of the best CoOx/Bi4Ti3O12 sample further increased to 2.96 h-1 under combined ultrasonic vibration and simulated sunlight. The synergy between piezocatalysis and photocatalysis can be ascribed to the following factors. The photoexcitation process ensures the sufficient generation of charge carriers in the CoOx/Bi4Ti3O12, while the piezoelectric field within Bi4Ti3O12 promotes the separation of electron-hole pairs in the bulk phase. Furthermore, the heterojunction structure between Bi4Ti3O12 and CoOx significantly facilitates the surface separation of charge carriers. This increased involvement of free electrons and holes in the reaction leads to a remarkable enhancement in catalytic MO degradation. This work contributes to the understanding of the coupling mechanism between the piezoelectric effect and photocatalysis, and also provides a promising strategy for the development of efficient catalysts for wastewater treatment.

Dual Lewis Acid-Base Sites Regulate Silver-Copper Bimetallic Oxide Nanowires for Highly Selective Photoreduction of Carbon Dioxide to Methane

Highly selective photoreduction of CO2 to valuable hydrocarbons is of great importance to achieving a carbon-neutral society. Precisely manipulating the formation of the Metal1 ⋅⋅⋅C=O⋅⋅⋅Metal2 (M1 ⋅⋅⋅C=O⋅⋅⋅M2 ) intermediate on the photocatalyst interface is the most critical step for regulating selectivity, while still a significant challenge. Herein, inspired by the polar electronic structure feature of CO2 molecule, we propose a strategy whereby the Lewis acid-base dual sites confined in a bimetallic catalyst surface are conducive to forming a M1 ⋅⋅⋅C=O⋅⋅⋅M2 intermediate precisely, which can promote selectivity to hydrocarbon formation. Employing the Ag2 Cu2 O3 nanowires with abundant Cu⋅⋅⋅Ag Lewis acid-base dual sites on the preferred exposed {110} surface as a model catalyst, 100 % selectivity toward photoreduction of CO2 into CH4 has been achieved. Subsequent surface-quenching experiments and density functional theory (DFT) calculations verify that the Cu⋅⋅⋅Ag Lewis acid-base dual sites do play a vital role in regulating the M1 ⋅⋅⋅C=O⋅⋅⋅M2 intermediate formation that is considered to be prone to convert CO2 into hydrocarbons. This study reports a highly selective CO2 photocatalyst, which was designed on the basis of a newly proposed theory for precise regulation of reaction intermediates. Our findings will stimulate further research on dual-site catalyst design for CO2 reduction to hydrocarbons.

Regulating the Electronic Structure of Bismuth Nanosheets by Titanium Doping to Boost CO2 Electroreduction and Zn-CO2 Batteries

The electrochemical carbon dioxide reduction reaction (E-CO2 RR) to formate is a promising strategy for mitigating greenhouse gas emissions and addressing the global energy crisis. Developing low-cost and environmentally friendly electrocatalysts with high selectivity and industrial current densities for formate production is an ideal but challenging goal in the field of electrocatalysis. Herein, novel titanium-doped bismuth nanosheets (TiBi NSs) with enhanced E-CO2 RR performance are synthesized through one-step electrochemical reduction of bismuth titanate (Bi4 Ti3 O12 ). We comprehensively evaluated TiBi NSs using in situ Raman spectra, finite element method, and density functional theory. The results indicate that the ultrathin nanosheet structure of TiBi NSs can accelerate mass transfer, while the electron-rich properties can accelerate the production of *CO2 - and enhance the adsorption strength of *OCHO intermediate. The TiBi NSs deliver a high formate Faradaic efficiency (FEformate ) of 96.3% and a formate production rate of 4032 µmol h-1  cm-2 at -1.01 V versus RHE. An ultra-high current density of -338.3 mA cm-2 is achieved at -1.25 versus RHE, and simultaneously FEformate still reaches more than 90%. Furthermore, the rechargeable Zn-CO2 battery using TiBi NSs as a cathode catalyst achieves a maximum power density of 1.05 mW cm-2 and excellent charging/discharging stability of 27 h.

D-π-A array structure of Bi4Ti3O12-triazine-aldehyde group benzene skeleton for enhanced photocatalytic uranium (VI) reduction

Photocatalytic reduction of U^VI to U^IV can help remove U from the environment and thus reduce the harmful impacts of radiation emitted by uranium isotopes. Herein, we first synthesized Bi₄Ti₃O₁₂ (B1) particles, then B1 was crosslinked with 6-chloro-1,3,5-triazine-diamine (DCT) to afford B2. Finally, B3 was formed using B2 and 4-formylbenzaldehyde (BA-CHO) to investigate the utility of the D-π-A array structure for photocatalytic U^VI removal from rare earth tailings wastewater. B1 lacked adsorption sites and displayed a wide band gap. The grafted triazine moiety in B2 introduced active sites and narrowed the band gap. Notably, B3, a Bi₄Ti₃O₁₂ (donor)-triazine unit (π-electron bridge)-aldehyde benzene (acceptor) molecule, effectively formed the D-π-A array structure, which formed multiple polarization fields and further narrowed the band gap. Therefore, U^VI was more likely to capture electrons at the adsorption site of B3 and be reduced to U^IV due to energy level matching effects. U^VI removal capacity of B3 under simulated sunlight was 684.9 mg g^-1, 2.5 times greater than B1 and 1.8 times greater than B2. B3 was still active after multiple reaction cycles, and U^VI removal from tailings wastewater reached 90.8%. Overall, B3 provides an alternative design scheme for enhancing photocatalytic performance.

Single atomic Ru in TiO2 boost efficient electrocatalytic water oxidation to hydrogen peroxide

Electrocatalytic two-electron water oxidation affords a promising approach for distributed production of H₂O₂ using electricity. However, it suffers from the trade-off between the selectivity and high production rate of H₂O₂ due to the lack of suitable electrocatalysts. In this study, single atoms of Ru were controllably introduced into titanium dioxide to produce H₂O₂ through an electrocatalytic two-electron water oxidation reaction. The adsorption energy values of OH intermediates could be tuned by introducing Ru single atoms, offering superior H₂O₂ production under high current density. Notably, a Faradaic efficiency of 62.8% with an H₂O₂ production rate of 24.2 μmol min^-1 cm^-2 (>400 ppm within 10 min) was achieved at a current density of 120 mA cm^-2. Consequently, herein, the possibility of high-yield H₂O₂ production under high current density was demonstrated and the importance of regulating intermediate adsorption during electrocatalysis was evidenced.

High-Performance Photocatalytic Reduction of Nitrogen to Ammonia Driven by Oxygen Vacancy and Ferroelectric Polarization Field of SrBi4 Ti4 O15 Nanosheets

Photo-responsive semiconductors can facilitate nitrogen activation and ammonia production, but the high recombination rate of photogenerated carriers represents a significant barrier. Ferroelectric photocatalysts show great promise in overcoming this challenge. Herein, by adopting a low-temperature hydrothermal procedure with varying concentrations of glyoxal as the reducing agent, oxygen vacancies (Vo) are effectively produced on the surface of ferroelectric SrBi₄ Ti₄ O₁₅ (SBTO) nanosheets, which leads to a considerable increase in photocatalytic activity toward nitrogen fixation under simulated solar light with an ammonia production rate of 53.41 µmol g^-1 h^-1 , without the need of sacrificial agents or photosensitizers. This is ascribed to oxygen vacancies that markedly enhance the self-polarization and internal electric field of ferroelectric SBTO, and hence, facilitate the separation of photogenerated charge carriers and light trapping as well as N₂ adsorption and activation, as compared to pristine SBTO. Consistent results are obtained in theoretical studies. Results from this study highlight the significance of surface oxygen vacancies in enhancing the performance of photocatalytic nitrogen fixation by ferroelectric catalysts.

Rapid Ferroelectric-Photoexcited Bacteria-Killing of Bi4Ti3O12/Ti3C2T x Nanofiber Membranes

In this study, an antibacterial nanofiber membrane [polyvinylidene fluoride/Bi₄Ti₃O₁₂/Ti₃C₂T _x (PVDF/BTO/Ti₃C₂T _x )] is fabricated using an electrostatic spinning process, in which the self-assembled BTO/Ti₃C₂T _x heterojunction is incorporated into the PVDF matrix. Benefiting from the internal electric field induced by the spontaneously ferroelectric polarization of BTO, the photoexcited electrons and holes are driven to move in the opposite direction inside BTO, and the electrons are transferred to Ti₃C₂T _x across the Schottky interface. Thus, directed charge separation and transfer are realized through the cooperation of the two components. The recombination of electron-hole pairs is maximumly inhibited, which notably improves the yield of reactive oxygen species by enhancing photocatalytic activity. Furthermore, the nanofiber membrane with an optimal doping ratio exhibits outstanding visible light absorption and photothermal conversion performance. Ultimately, photothermal effect and ferroelectric polarization enhanced photocatalysis endow the nanofiber membrane with the ability to kill 99.61% ± 0.28% Staphylococcus aureus and 99.71% ± 0.16% Escherichia coli under 20 min of light irradiation. This study brings new insights into the design of intelligent antibacterial textiles through a ferroelectric polarization strategy.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s42765-022-00234-8.

Efficient NO removal and photocatalysis mechanism over Bi-metal@Bi2O2[BO2(OH)] with oxygen vacancies

Photocatalysis technology prevails as a feasible option for air pollution control, in which high-efficiency charge separation and effective pollutant activation are the crucial issues. Here, this work designed Bi-metal@ Bi₂O₂[BO₂(OH)] with oxygen vacancies (OVs) catalyst for photocatalytic oxidation of NO under visible light, to shed light on the above two processes. Experimental characterizations and density functional theory (DFT) calculations reveal that a unique electron transfer covalent loop（[Bi₂O₂]²⁺ → Bi-metal → O^2-）can be formed during the reaction to guide the directional transfer of carriers, significantly improving the charge separation efficiency and the yield of active oxygen species. Simultaneously, the defect levels served by OVs also play a part. During the NO purification process, in-situ DRIFTS assisted with DFT calculations reveal that Bi metals could be functioned as electron donors to activate NO molecules and form NO^-, a key intermediate. This induces a new reaction path of NO → NO^- → NO₃^- to achieve the harmless conversion of NO, effectively restraining the generation of noxious intermediates (NO₂, N₂O₄). It is expected that this study would inspire the design of more artful photocatalysts for effective charge transfer and safe pollutants purification.

Recent advances of bismuth titanate based photocatalysts engineering for enhanced organic contaminates oxidation in water: A review

Over more than three decades, the scientific community has been contentiously interested in structuring varying photocatalytic materials with unique properties for appropriate technology transfer. Most of the existing reported photocatalysts in the literature show pros and cons by considering the type of application and working conditions. Bismuth titanate oxides (BTO) are novel photocatalysts that raised recently towards energy and environmental-related applications. Most recent advances to developing bismuth titanate-based photocatalysts for the oxidation of organic pollutants in the water phase were reviewed in this report. To counter the potential drawbacks of BTO materials, i.e., rapid recombination of photoproduced charges, and further promote the photoactivity, most reported approaches were discussed, including creating direct Z-scheme junctions, conventional heterojunctions, metal/non-metal doping, coupling with carbon materials, surface modification and construction of oxygen vacancies. In the end, the review addresses the future trends for better engineering and application of BTO based photocatalysts towards the photodegradation of organic pollutants in water under controlled lab and large scales conditions.

Two-dimensional ultrathin metal-based nanosheets for photocatalytic CO2 conversion to solar fuels

Artificially simulated photosynthesis has created substantial curiosity as the majority of efforts in this arena have been aimed to upsurge solar fuel efficiencies for commercialization. The layered inorganic 2D nanosheets offer considerably higher tunability of their chemical surface, physicochemical properties and catalytic activity. Despites the intrinsic advantages of such metal-based materials viz., metal oxides, transition metal dichalcogenides, metal oxyhalides, metal organic frameworks, layered double hydroxide, MXene's, boron nitride, black phosphorous and perovskites, studies on such systems are limited for applications in photocatalytic CO₂ reduction. The role of metal-based layers for CO₂ conversion and new strategies such as surface modifications, defect generation and heterojunctions to optimize their functionalities are discussed in this review. Research prospects and technical challenges for future developments of layered 2D metal-based nanomaterials are critically discussed.

Tin bisulfide nanoplates anchored onto flower-like bismuth tungstate nanosheets for enhancement in the photocatalytic degradation of organic pollutant

The development of efficient heterojunctions through a simple and facile method is an effective way to enhance the photocatalytic performance of bismuth-based oxide semiconductors for industrial applications. Here, the novel flower-like type II SnS₂/Bi₂WO₆ heterostructure consisting of bismuth tungstate (Bi₂WO₆) nanosheets and tin bisulfide (SnS₂) nanoplates was successfully designed and synthesized. The crystal structure, composition, morphology, and photoelectric properties of the heterostructure were systematically characterized. In addition, the photocatalytic activity of SnS₂/Bi₂WO₆ was analyzed and compared with Bi₂WO₆ or SnS₂ alone or physical mixture of SnS₂ and Bi₂WO₆. 2%SnS₂/Bi₂WO₆ presents a 3.1 times greater degradation rate constant (0.0065 min^-1) than that of Bi₂WO₆ (0.0021 min^-1) under low visible light irradiation (5.3 mW·cm^-2, a 44 W LED), while SnS₂ alone exhibits no photocatalytic effect toward glyphosate. Furthermore, 2%SnS₂/Bi₂WO₆ maintains 93% of its original photocatalytic activity even after four cycles. The possible photocatalytic degradation pathway of glyphosate and photocatalytic mechanism are also proposed. The excellent photocatalytic performance of SnS₂/Bi₂WO₆ is attributed to the decoration of SnS₂ nanoplates on the surface of Bi₂WO₆, appropriate (113)/(020) ratio, increased visible-light absorption, and effective separation of photoinduced carriers. This paper reports a new methodology that can act as a reference basis to design and develop visible-light responsive photocatalysts with outstanding photocatalytic performance for carbon dioxide reduction, water splitting, and pollutant degradation.

Carbon vacancy-mediated exciton dissociation in Ti3C2Tx/g-C3N4 Schottky junctions for efficient photoreduction of CO2

Earth-abundant g-C₃N₄ is a promising photocatalyst for CO₂ reduction, but its practical application is severely limited by the excitonic effect of g-C₃N₄ derived from strong binding energy and lack of electron-enriched active sites. Herein, we design a novel 2D/2D Schottky junction photocatalysts comprising of Ti₃C₂T_x-modified defective g-C₃N₄ nanosheets with carbon vacancy (denoted as Ti₃C₂T_x/V_c-CN) by a self-assembly method. The carbon vacancies in g-C₃N₄ promote exciton dissociation into free charge, while the formed Schottky junctions between Ti₃C₂T_x and V_c-CN further enables a directional charge transfer, thus providing an electron-rich catalytic surface for the CO₂ reduction. Thanks to the synergy of promoted exciton dissociation and directional electron transfer, the optimal 20% Ti₃C₂T_x/V_c-CN display a high CO evolution rate of 20.54 µmol·g^-1·h^-1 under visible light irradiation, which is 7.4 times higher than that of bare CN. This work highlights the synergy of the promoted exciton dissociation and directional electron transfer in the activity enhancement of photocatalytic CO₂ reduction.

Enhanced photocatalytic benzyl alcohol oxidation over Bi4Ti3O12 ultrathin nanosheets

Ultrathin Bi₄Ti₃O₁₂ nanosheets (NS) with the thickness about 3.9 nm were successfully synthesized by a hydrothermal method and were used as a photocatalyst for the oxidation of benzyl alcohol (BA) to benzaldehyde (BAD). The photocatalytic performance of NS is about 8 times higher than that of bulk Bi₄Ti₃O₁₂. In-situ FTIR of pyridine adsorption and NH₃-TPD reveal that NS has more surface Lewis acid sites (Ti⁴⁺) for the adsorption and activation of BA. The photogenerated electrons (e^-) and holes (h⁺) of NS can be fully used to produce the superoxide radicals and carbon-centered radicals, respectively. The monolayer nanosheet structure of NS not only greatly promotes the separation of photogenerated carriers, but also achieves the efficient activation of BA molecules via the CO⋯Ti coordination. This work successfully reveals the surface/interface interactions between the surface active sites of a photocatalyst and the reactive molecules via using ultrathin nanosheet as a molecular platform.

Engineered magnetic oxides nanoparticles as efficient sorbents for wastewater remediation: a review

The rapid urbanization and industrialization is causing worldwide water pollution, calling for advanced cleaning methods. For instance, pollutant adsorption on magnetic oxides is efficient and very practical due to the easy separation from solutions by an magnetic field. Here we review the synthesis and performance of magnetic oxides such as iron oxides, spinel ferrites, and perovskite oxides for water remediation. We present structural, optical, and magnetic properties. Magnetic oxides are also promising photocatalysts for the degradation of organic pollutants. Antimicrobial activities and adsorption of heavy metals and radionucleides are also discussed.

A review of advances in multifunctional XTiO3 perovskite-type oxides as piezo-photocatalysts for environmental remediation and energy production

Over more than three decades, the field of engineering of photocatalytic materials with unique properties and enhanced performance has received a huge attention. In this regard, different classes of materials were fabricated and used for different photocatalytic applications. Among these materials, recently multifunctional XTiO₃ perovskites have drawn outstanding interest towards environmental remediation and energy conversion thanks to their unique structural, optical, physiochemical, electrical and thermal characteristics. XTiO₃ perovskites are able to initiate different surface catalytic reactions. Under ultrasonic vibration or heating, XTiO₃ perovskites can induce piezo-catalytic reactions due to the titling of their conduction and valence bands, resulting in the formation of separated charge carriers in the medium. In addition, under light irradiation, XTiO₃ perovskites are considered as a new class of photocatalysts for environmental and energy related applications. Herein, we addressed the recent advances on variously synthesized, doped and formulated XTiO₃ perovskite-type oxides showing piezo- and/or photocatalytic exploitation in environmental remediation and energy conversion. The control of structural crystallite size and phase, conductivity, morphology, oxygen vacancy control, doping agents and ratio has a significant role on the photocatalytic and piezocatalytic activities. The different piezo or/and photocatalytic processes mechanistic pathways towards varying applications were discussed. The current challenges facing these materials and future trends were addressed at the end of the review.

Cocatalyst engineering to weaken the charge screening effect over Au–Bi4Ti3O12 for piezocatalytic pure water splitting

The weak driving force and rapid carrier recombination severely restrict the development and utilization of piezocatalysis, but the important reason is the charge screening effect.

Unique Cd0.5Zn0.5S/WO3-x direct Z-scheme heterojunction with S, O vacancies and twinning superlattices for efficient photocatalytic water-splitting

Photocatalytic water-splitting employing the Z-scheme semiconductor systems mimicking natural photosynthesis is regarded as a promising way to achieve efficient soalr-to-H₂ conversion. Nevertheless, it still remains a big challenge to design high-performance direct Z-scheme photocatalysts without the use of noble metals as electron mediators. Herein, a unique Cd_0.5Zn_0.5S/WO_3-x direct Z-scheme heterojunction was constructed for the first time, which consisted of smaller O-vacancy-decorated WO_3-x nanocrystals anchoring on Cd_0.5Zn_0.5S nanocrystals with S vacancies and zinc blende/wurtzite (ZB/WZ) twinning superlattices. Under visible-light (λ > 420 nm) irradiation, the Cd_0.5Zn_0.5S/WO_3-x composites exhibited an outstanding H₂ evolution reaction (HER) activity of 20.50 mmol h^-1 g^-1 (corresponding to the apparent quantum efficiency of 18.0% at 420 nm), which is much superior to that of WO_3-x, Cd_0.5Zn_0.5S, and Cd_0.5Zn_0.5S loaded with Pt. Interestingly, the introduced O and S vacancies contributed to improving the HER activity of Cd_0.5Zn_0.5S/WO_3-x significantly. Moreover, the cycling and long-term HER measurements confirmed the robust photocatalytic stability of Cd_0.5Zn_0.5S/WO_3-x for H₂ production. The excellent light harvesting and efficient spatial charge separation induced by the ZB/WZ twinning homojunctions and defect-promoted direct Z-scheme charge-transfer pathway are responsible for the exceptional HER capability. Our study could enlighten the rational engineering and optimization of semiconductor nanostructures for energy and environmental applications.

CO2 Footprint of Thermal Versus Photothermal CO2 Catalysis

Transformation of CO₂ into value-added products via photothermal catalysis has become an increasingly popular route to help ameliorate the energy and environmental crisis derived from the continuing use of fossil fuels, as it can integrate light into well-established thermocatalysis processes. The question however remains whether negative CO₂ emission could be achieved through photothermal catalytic reactions performed in facilities driven by electricity mainly derived from fossil energy. Herein, we propose universal equations that describe net CO₂ emissions generated from operating thermocatalysis and photothermal reverse water-gas shift (RWGS) and Sabatier processes for batch and flow reactors. With these reactions as archetype model systems, the factors that will determine the final amount of effluent CO₂ can be determined. The results of this study could provide useful guidelines for the future development of photothermal catalytic systems for CO₂ reduction.

Ultrathin indium vanadate/cadmium selenide-amine step-scheme heterojunction with interfacial chemical bonding for promotion of visible-light-driven carbon dioxide reduction

The formation of interfacial chemical bonding in heterostructures plays an important role in the transport of carriers. Herein, we firstly prepared ultrathin InVO₄ nanosheet (Ns) with a thickness of 1.5 nm. Diethylenetriamine-modified CdSe (CdSe-DETA) nanobelts are in-situ deposited on the surface of ultrathin InVO₄ Ns to build a InVO₄/CdSe-DETA step-scheme (S-scheme) heterojunction photocatalysts. The protonated DETA acts as an amine-bridge to promote the formation of a tight chemical bond at the interface of InVO₄/CdSe-DETA, thereby promoting the transfer of carriers at the interface. For photocatalytic CO₂ reduction, the rationally designed InVO₄/CdSe-DETA S-scheme photocatalyst exhibits a remarkable CO generation rate of 27.9 µmol h^-1 g^-1 at 420 nm, which is 3.35 and 3.39 times higher than that of CdSe-DETA and InVO₄ Ns, respectively. The new method by using interfacial chemical bonding to facilitate interfacial charge transportation provide a promising strategy for improve photocatalysis.

Turbulence enhanced ferroelectric-nanocrystal-based photocatalysis in urchin-like TiO2/BaTiO3 microspheres for hydrogen evolution

The application of a built-in electric field due to piezoelectric potential is one of the most efficient approaches for photo-induced charge transport and separation. However, the efficiency of converting mechanical energy to chemical energy is still very low, and the enhancement of photocatalysis, thus, is limited. To overcome this problem, here, we propose sonophotocatalysis based on a new hybrid photocatalyst, which combines ferroelectric nanocrystals (BaTiO₃) and dendritic TiO₂ to form an urchin-like TiO₂/BaTiO₃ hybrid photocatalyst. Under periodic ultrasonic excitation, a spontaneous polarization potential of BaTiO₃ nanocrystals in response to ultrasonic waves can act as an alternating built-in electric field to separate photoinduced carriers incessantly, which can significantly enhance the photocatalytic activity and cyclic performance of the urchin-like TiO₂/BaTiO₃ catalyst. More importantly, the significant enhancement of photocatalytic hydrogen evolution is due to the coupling effect of two types of piezoelectric potential in the presence of BaTiO₃ nanocubes as well as the semiconductor and optical properties of TiO₂ nanowires of the urchin-like TiO₂/BaTiO₃ hybrid structure under simulated sunlight and periodic ultrasonic irradiation, which can significantly improve the efficiency of converting mechanical energy to chemical energy.

Plasmonic Bi-enhanced ammoniated α-MnS/Bi2MoO6 S-scheme heterostructure for visible-light-driven CO2 reduction

Low redox ability and severe photocorrosion limit the photocatalytic activity of metal sulfides. Herein, step-scheme (S-scheme) heterojunction composited by diethylenetriamine (DETA) ammoniated MnS (α-MnS) and Bi₂MoO₆ with Bi surface plasmon resonance (SPR) was successfully fabricated (Bi-5 %M/BMO). This special electron transport structure effectively suppresses the photocorrosion of α-MnS and makes photocatalysts with high redox ability. DETA was protonated to form positively charged ammonium ions and they are easy to combine with acid gas CO₂, reducing the activation energy of CO₂, building an efficient catalytic reaction system, and improving CO₂ reduction efficiency. The CO evolution rate of Bi-5 %M/BMO (61.11 μmol g^-1h^-1) is 2.42, 7.89 and 5.01 times greater than that of 5 %M/BMO, pure α-MnS hollow spheres and Bi₂MoO₆, respectively. This indicates that Bi SPR effect can promote the separation of photon-generated electron-hole pairs dramatically. The ammoniated S-scheme heterostructure decorated with the SPR effect may provide a new perspective to design heterojunction.

BiO(OH)xI1-x solid solution with rich oxygen vacancies: interlayer guest hydroxyl for improved photocatalytic properties

A series of BiO(OH)_xI_1-x solid solution (SS) catalysts were successfully prepared by ion exchange of I^- and OH^- between the [Bi₂O₂]²⁺ layers. The morphology and microstructure were studied in depth using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Brunauer-Emmett-Teller (BET) method, etc. Tunable absorption in the visible-light region was achieved by changing the proportion of OH^- to I^-. Due to the etching effect of OH^-, oxygen vacancies (OVs) greatly increased for the SS catalysts, and were confirmed by X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), and electron paramagnetic spectroscopy (EPR). The unique composition of OH^-, I^-, OV, and [Bi₂O₂]²⁺ layers in BiO(OH)_xI_1-x materials resulted in diverse photoexcitations. The BiO(OH)_0.45I_0.55 photocatalyst displayed a 10-fold-improved 2-chlorophenol (2-CP) degradation rate compared to BiOI. The interfacial reaction process by the photoinduced valence-band holes and conduction-band electrons proved to be a more efficient pathway for organic pollutant degradation by the BiO(OH)_xI_1-x SS photocatalyst. The OVs in the SS photocatalyst facilitated photoexcited and electron migration and transformation.

Atomic-Level Charge Separation Strategies in Semiconductor-Based Photocatalysts

Semiconductor-based photocatalysis as a productive technology furnishes a prospective solution to environmental and renewable energy issues, but its efficiency greatly relies on the effective bulk and surface separation of photoexcited charge carriers. Exploitation of atomic-level strategies allows in-depth understanding on the related mechanisms and enables bottom-up precise design of photocatalysts, significantly enhancing photocatalytic activity. Herein, the advances on atomic-level charge separation strategies toward developing robust photocatalysts are highlighted, elucidating the fundamentals of charge separation and transfer processes and advanced probing techniques. The atomic-level bulk charge separation strategies, embodied by regulation of charge movement pathway and migration dynamic, boil down to shortening the charge diffusion distance to the atomic-scale, establishing atomic-level charge transfer channels, and enhancing the charge separation driving force. Meanwhile, regulating the in-plane surface structure and spatial surface structure are summarized as atomic-level surface charge separation strategies. Moreover, collaborative strategies for simultaneous manipulation of bulk and surface photocharges are also introduced. Finally, the existing challenges and future prospects for fabrication of state-of-the-art photocatalysts are discussed on the basis of a thorough comprehension of atomic-level charge separation strategies.

Light-Driven Syngas Production over Defective ZnIn2 S4 Nanosheets

Photocatalytic syngas (CO and H₂ ) production with CO₂ as gas source not only ameliorates greenhouse effect, but also produces valuable chemical feedstocks. However, traditional photocatalytic systems require noble metal or suffers from low yield. Here, we demonstrate that S vacancies ZnIn₂ S₄ (V_S -ZnIn₂ S₄ ) nanosheets are an ideal photocatalyst to drive CO₂ reduction into syngas. It is found that building S vacancies can endow ZnIn₂ S₄ with stronger photoabsorption, efficient electron-hole separation, and larger CO₂ adsorption, finally promoting both hydrogen evolution reaction (HER) and CO₂ reduction reaction (CO₂ RR). The syngas yield of CO and H₂ is therefore significantly increased. In contrast to pristine ZnIn₂ S₄ , the syngas yield over V_S -ZnIn₂ S₄ can be improved by roughly ≈4.73 times and the CO/H₂ ratio is modified from 1:4.18 to 1:1. Total amount of syngas after 12 h photocatalysis is as high as 63.20 mmol g^-1 without use of any noble metals, which is even higher than those of traditional noble metal-based catalysts in the reported literatures. This work demonstrates the critical role of S vacancies in mediating catalytic activity and selectivity, and highlights the attractive ability of defective ZnIn₂ S₄ for light-driven syngas production.

Facile assembled N, S-codoped corn straw biochar loaded Bi2WO6 with the enhanced electron-rich feature for the efficient photocatalytic removal of ciprofloxacin and Cr(VI)

To the best of our knowledge, in few studies, biochar (BC)-based materials have been used as the photocatalyst for water purification, and their application is limited to a great extent due to catalyst agglomeration and inefficient electron migration. In this study, a novel Bi₂WO₆ loaded N, S co-doping corn straw biochar (Bi₂WO₆/NSBC) was successfully synthesized with a simple solvothermal method for the removal of ciprofloxacin (CIP) and Cr(VI) under visible light irradiation. The Bi₂WO₆/NSBC was featured with efficient and rapid catalytic removal toward CIP (5 mg/L) and Cr(VI) (10 mg/L), with efficiencies of ∼90.33% and ∼99.86% within 75 min, respectively. More attractively, this composite can be applied in a wide pH range (3.0-9.0) and with weak effects by coexisting ions (Cl^-, CO₃^2-, SO₄^2-, and Ca²⁺). The facile synthesized porous graphitized structure demonstrates an outstanding performance of superior conductivity and promoted photoelectron transport. Meanwhile, it is found that N, S co-doping of the BC induces highly interconnected fibrous structures, high catalytic property, and favorable specific surface areas, which is considered to avoid agglomeration of Bi₂WO_6. The increased photocatalytic activity results from the synergistic effects of Bi₂WO₆ and NSBC by the optimized band gap and enhanced visible light response, due to higher migration and utilization efficiency of photoinduced carriers in photocatalytic reactions. In this approach, a cheap catalyst is provided, and at the same time, a synergistic effect of N, S co-doping is formed to rapidly remove contaminants in wastewater treatment.

Facet-selective charge separation in two-dimensional bismuth-based photocatalysts

In this review, we summarize recent advances in the facet design of bismuth-based single-crystal plates based on facet-dependent charge separation for photocatalytic reactions, and the manipulation of the spatial charge separation is highlighted.

Regulating morphological and electronic structures of polymeric carbon nitrides by successive copolymerization and stream reforming for photocatalytic CO2 reduction

Greatly reinforced photocatalytic CO₂ reduction is realized with carbon nitride polymers tailored via a coupled copolymerization and stream reforming strategy.