Decorating graphdiyne on ultrathin bismuth subcarbonate nanosheets to promote CO2 electroreduction to formate

A Multi-Interface Structure of Graphdiyne/Cobalt Oxides for Chlorine Production

A challenge facing the chlor-alkali process is the lack of electrocatalyst with high activity and selectivity for the efficient industrial production of chlorine. Herein the authors report a new electrocatalyst that can generate multi-interface structure by in situ growth of graphdiyne on the surface of cobalt oxides (GDY/Co3O4), which shows great potential in highly selective and efficient chlorine production. This result is due to the strong electron transfer and high density charge transport between GDY and Co3O4 and the interconversion of the mixed valence states of the Co atoms itself. These intrinsic characteristics efficiently enhance the conductivity of the catalyst, facilitate the reaction kinetics, and improve the overall catalytic selectivity and activity. Besides, the protective effect of the formed GDY layer is remarkable endowing the catalyst with excellent stability. The catalyst can selectively produce chlorine in low-concentration of NaCl aqueous solution at room temperature and pressure with the highest Faraday efficiency of 80.67% and an active chlorine yield rate of 184.40 mg h-1 cm-2, as well as superior long-term stability.

Supramolecular Anchoring of Fe(III) Molecular Redox Catalysts into Graphitic Surfaces Via CH-π and π-π Interactions for CO2 Electroreduction

Photoelectrochemical devices require solid anodes and cathodes for the easy assembling of the whole cell and thus redox catalysts need to be deposited on the electrodes. Typical catalyst deposition involves drop casting, spin coating, doctor blading or related techniques to generate modified electrodes where the active catalyst in contact with the electrolyte is only a very small fraction of the deposited mass. We have developed a methodology where the redox catalyst is deposited at the electrode based on supramolecular interactions, namely CH-π and π-π between the catalyst and the surface. This generates a very well-defined catalysts-surface structure and electroactivity, together with a very large catalytic response. This approach represents a new anchoring strategy that can be applied to catalytic redox reactions in heterogeneous phase and compared to traditional methods involves about 4-5 orders of magnitude less mass deposition to achieve comparable activity and with very well-behaved electroactivity and stability.

Anion-Mediated In Situ Reconstruction of the Bi2MoO6 Precatalyst for Enhanced Electrochemical CO2 Reduction over a Wide Potential Window

Electrochemical CO2 reduction reaction (eCO2RR) is a viable approach to achieve carbon neutrality. Bismuth-based electrocatalysts demonstrate exceptional selectivity in CO2-to-formate conversion, but their reconstruction mechanisms during the eCO2RR remain elusive. Herein, the reconstruction processes of bismuth molybdate (Bi2MoO6) nanoplates are elucidated during the eCO2RR. Operando and ex situ measurements reveal the in situ partial reduction of Bi2MoO6 to Bi metal, forming Bi@Bi2MoO6 at negative potentials. Meanwhile, CO32- ions in the electrolyte spontaneously exchange with MoO42- in Bi2MoO6. The obtained Bi@Bi2MoO6/Bi2O2CO3 delivers a formate Faradaic efficiency (FE) of 95.2% at -1.0 V. Notably, high formate FEs (>90%) are maintained within a wide 500 mV window. Although computational calculations indicate a higher energy barrier for *OCHO formation on Bi2O2CO3, the prevention of excessive reduction to metal Bi significantly enhances long-term stability. Furthermore, the CO32- ion exchange process occurs in various 2D Bi-containing precatalysts, which should be emphasized in further studies.

Highly efficient zinc electrode prepared by electro-deposition in a salt-induced pre-phase separation region solution

Efficient electrode design is crucial for the electrochemical reduction of CO2 to produce valuable chemicals. The solution used for the preparation of electrodes can affect their overall properties, which in turn determine the reaction efficiency. In this work, we report that transition metal salts could induce the change of two-phase ionic liquid/ethanol mixture into miscible one phase. Pre-phase separation region near the phase boundary of the ternary system was observed. Zinc nanoparticles were electro-deposited along the fibres of carbon paper (CP) substrate uniformly in the salt-induced pre-phase separation region solution. The as-prepared Zn(1)/CP electrode exhibits super-wettability to the electrolyte, rendering very high catalytic performance for CO2 electro-reduction, and the Faradaic efficiency towards CO is 97.6% with a current density of 340 mA cm-2, which is the best result to date in an H-type cell.

Restraining Interfacial Cu2+ by using Amorphous SnO2 as Sacrificial Protection Boosts CO2 Electroreduction

The electrochemical carbon dioxide reduction reaction (CO2 RR) to formate is of great interest in the field of electrochemical energy. Cu-based material is an appealing electrocatalyst for the CO2 RR. However, retaining Cu2+ under the high cathodic potential of CO2 RR remains a great challenge, leading to low electrocatalytic selectivity, activity, and stability. Herein, inspired by corrosion science, a sacrificial protection strategy to stabilize interfacial crystalline CuO through embedding of active amorphous SnO2 (c-CuO/a-SnO2 ) is reported, which greatly boosts the electrocatalytic sensitivity, activity, and stability for CO2 RR to formate. The as-made hybrid catalyst can achieve superior high selectivity for CO2 RR to formate with a remarkable Faradaic efficiency (FE) of 96.7%, and a superhigh current density of over 1 A cm-2 that far outperforms industrial benchmarks (FE > 90%, current density > 300 mA cm-2 ). In situ X-ray absorption spectroscopy (XAS) and X-ray diffractionexperimental and theoretical calculation results reveal that the broadened s-orbital in interfacial a-SnO2 offers the lower orbital for extra electrons than Cu2+ , which can effectively retain nearby Cu2+ , and the high active interface significantly lowers the energy barrier of the limited step (* CO2 → * HCOO) and enhances the selectivity and activity for CO2 RR to formate.

Anion Exchange Facilitates the In Situ Construction of Bi/BiO Interfaces for Enhanced Electrochemical CO2 -to-Formate Conversion Over a Wide Potential Window

Electrochemical reduction of CO2 (CO2 RR) into value-added products is a promising strategy to reduce energy consumption and solve environmental issues. Formic acid/formate is one of the high-value, easy-to-collect, and economically viable products. Herein, the reconstructed Bi2 O2 CO3 nanosheets (BOCR NSs) are synthesized by an in situ electrochemical anion exchange strategy from Bi2 O2 SO4 as a pre-catalyst. The BOCR NSs achieve a high formate Faradaic efficiency (FEformate ) of 95.7% at -1.1 V versus reversible hydrogen electrode (vs. RHE), and maintain FEformate above 90% in a wide potential range from -0.8 to -1.5 V in H-cell. The in situ spectroscopic studies reveal that the obtained BOCR NSs undergo the anion exchange from Bi2 O2 SO4 to Bi2 O2 CO3 and further promote the self-reduction to metallic Bi to construct Bi/BiO active site to facilitate the formation of OCHO* intermediate. This result demonstrates anion exchange strategy can be used to rational design high performance of the catalysts toward CO2 RR.

Recent progress in neuromorphic and memory devices based on graphdiyne

Graphdiyne (GDY) is an emerging two-dimensional carbon allotrope featuring a direct bandgap and fascinating physical and chemical properties, and it has demonstrated its promising potential in applications of catalysis, energy conversion and storage, electrical/optoelectronic devices, etc. In particular, the recent breakthrough in the synthesis of large-area, high-quality and ultrathin GDY films provides a feasible approach to developing high-performance electrical devices based on GDY. Recently, various GDY-based electrical and optoelectronic devices including multibit optoelectronic memories, ultrafast nonvolatile memories, artificial synapses and memristors have been proposed, in which GDY plays a crucial role. It is essential to summarize the recent breakthrough of GDY in device applications as a guidance, especially considering that the existing GDY-related reviews mainly focus on the applications in catalysis and energy-related fields. Herein, we review GDY-based novel memory and neuromorphic devices and their applications in neuromorphic computing and artificial visual systems. This review will provide an insight into the design and preparation of GDY-based devices and broaden the application fields of GDY.

Modulating the Electronic Structures of Dual-Atom Catalysts via Coordination Environment Engineering for Boosting CO2 Electroreduction

Dual-atom catalysts (DACs) have emerged as efficient electrocatalysts for CO₂ reduction owing to the synergistic effect between the binary metal sites. However, rationally modulating the electronic structure of DACs to optimize the catalytic performance remains a great challenge. Herein, we report the electronic structure modulation of three Ni₂ DACs (namely, Ni₂ -N₇ , Ni₂ -N₅ C₂ and Ni₂ -N₃ C₄ ) by the regulation of the coordination environments around the dual-atom Ni₂ centres. As a result, Ni₂ -N₃ C₄ exhibits significantly improved electrocatalytic activity for CO₂ reduction, not only better than the corresponding single-atom Ni catalyst (Ni-N₂ C₂ ), but also higher than Ni₂ -N₇ and Ni₂ -N₅ C₂ DACs. Density functional theory (DFT) calculations revealed that the high electrocatalytic activity of Ni₂ -N₃ C₄ for CO₂ reduction could be attributed to the electronic structure modulation to the Ni centre and the resulted proper binding energies to COOH* and CO* intermediates.

Catalytically Active Advanced Two-Dimensional Ultrathin Nanomaterials for Sustainable Energy

Advanced two-dimensional (2D) ultrathin nanomaterials’ unique structural and electronic properties and their applications in the photo-, photoelectro-, and electro-catalysis fields present timely topics related to the development of sustainable energy. This critical review briefly summarizes the state-of-the-art progress on 2D ultrathin nanomaterials. In this mini review, we started with the synthesis of 2D ultrathin nanomaterials. Then, various strategies for tailoring the electronic and configuration structures of these nanomaterials in the new energy catalysis field are surveyed, where the emphasis is mainly on structure-activity relationships. The advancements of versatile 2D ultrathin nanomaterials in the fields of hydrogen evolution, carbon dioxide conversion, and dinitrogen fixation for sustainable energy were also discussed. Finally, the existing challenges and future research directions in this promising field are presented.

Graphdiyne Electrochemistry: Progress and Perspectives

Graphdiyne, a carbon allotrope, was synthesized in 2010 for the first time. It consists of two acetylene bonds between adjacent benzene rings. Graphdiyne and its composites thus exhibit ultrahigh intrinsic electrochemical activities. As "star" electrode materials, they have been utilized for various electrochemical applications. With the aim of giving a full screen of graphdiyne electrochemistry, this review starts from the history of graphdiyne materials, followed by their structural and electrochemical features. Recent progress and achievements in the synthesis of graphdiyne materials and their composites are overviewed. Subsequently, various electrochemical applications of graphdiyne materials and their composites are summarized, covering those in the fields of electrochemical energy conversion, electrochemical energy storage, and electrochemical sensing. The perspectives of graphdiyne electrochemistry are also discussed and outlined.

2D graphdiyne: an emerging carbon material

As a new member of carbon allotropes, graphdiyne (GDY) has the characteristics of being one-atom-thick with two-dimensional layers comprising sp and sp² hybridized carbon atoms, and represents a trend in the development of carbon materials. Its unique chemical and electronic structures give GDY many unique and fascinating properties such as rich chemical bonds, highly conjugated and super-large π structures, infinitely distributed pores and high inhomogeneity of charge distribution. GDY has entered a period of rapid development, especially with the significant emergence of fundamental research and applied research achievements over the past five years. As one of the frontiers of chemistry and materials science, graphdiyne was listed in the Top 10 research areas in the 2020 Research Frontiers report and was jointly released in the Top 10 in the world by Clarivate and the Chinese Academy of Sciences. The research results have shown the great potential of GDY in the applications of energy, catalysis, environmental science, electronic devices, detectors, biomedicine and therapy, etc. Scientists are eager to explore and fully reveal the new properties, discover new scientific concepts and phenomena, discover the new conversion modes and mechanisms of GDY in photoelectricity, energy, and catalysis, etc., and build the important scientific value of new conversion devices. This review covers research on the foundation and application of GDY, such as the controlled preparation of new methods of GDY and GDY-based materials, studies on new mechanisms and properties in chemistry and physics, and the foundation and applications in energy, catalysis, photoelectric and devices.