Dietary exposure to copper in the European Union and its assessment for EU regulatory risk assessment

Recombinant human metallothionein-III alleviates oxidative damage induced by copper and cadmium in Caenorhabditis elegans

Recombinant human metallothionein III (rh-MT-III) is a genetically engineered product produced by Escherichia coli fermentation technology. Its molecules contain abundant reducing sulfhydryl groups, which possess the ability to bind heavy metal ions. The present study was to evaluate the binding effects of rh-MT-III against copper and cadmium in vitro and to investigate the antioxidant activity of rh-MT-III using Caenorhabditis elegans in vivo. For in vitro experiments, the binding rates of copper and cadmium were 91.4% and 97.3% for rh-MT-III at a dosage of 200 μg/mL at 10 h, respectively. For in vivo assays, the oxidative stress induced by copper (CuSO₄ , 10 μg/mL) and cadmium (CdCl₂ , 10 μg/mL) was significantly reduced after 72 h of exposure to different doses of rh-MT-III (5-500 μg/mL), indicated by restoring locomotion behavior and growth, and reducing malondialdehyde and reactive oxygen species levels in C. elegans. Moreover, rh-MT-III decreased the deposition of lipofuscin and fat content, which could delay the progression of aging. In addition, rh-MT-III (500 μg/mL) promoted the up-regulation of Mtl-1 and Mtl-2 gene expression in C. elegans, which could enhance the resistance to oxidative stress by increasing the enzymatic activity of antioxidant defense system and scavenging free radicals. The results indicated that supplemental rh-MT-III could effectively protect C. elegans from heavy metal stress, providing an experimental basis for the future application and development of rh-MT-III.

High Sensitivity Detection of Copper Ions in Oysters Based on the Fluorescence Property of Cadmium Selenide Quantum Dots

Cadmium selenide (CdSe) quantum dots (QDs) were synthesized by water phase synthesis method using 3-mercaptopropionic acid (3-MPA) as a stabilizer, and they were applied to the detection of copper ions (Cu2+). The results showed that CdSe QDs have excellent selectivity and sensitivity toward Cu2+. The fluorescence intensity of CdSe QDs decreased with the increase of Cu2+ concentration. The linear range was from 30 nM to 3 μM, and the detection limit was 30 nM. Furthermore, CdSe QDs were used for detecting the concentration of Cu2+ in oysters. The content of Cu2+ was 40.91 mg/kg, which was close to the one measured via flame atomic absorption spectrometry (FAAS), and the relative error was 1.81%. Therefore, CdSe QDs have a wide application prospect in the rapid detection of copper ions in food.

Exposure risk of local residents to copper near the largest flash copper smelter in China

Copper (Cu) smelting released large amounts of Cu and contaminated the environment. However, few studies have investigated the Cu exposure risks for people located near Cu smelters. In this study, atmospheric bulk deposition, food from local families, drinking water and biological samples (hair and urine) were collected in three villages near the largest flash Cu smelter in China. The objective of the current study was to investigate how non-ferrous metals smelting affect the human health. Total atmospheric Cu depositions (56-767μgm^-2yr^-1) were one or two orders of magnitude greater than that of unpolluted rural areas. The Cu concentrations in locally grown vegetables and dietary chronic daily intake (CDI) of local residents showed a consistently decreasing trend with atmospheric Cu depositions. Dietary intake of vegetables and rice were the two major pathways of total CDI, which accounted for >93% totally. The Cu exposure showed higher potential non-carcinogenic risk to human health of local residents, especially children living around the Cu smelter through food consumptions. Health impact monitoring data revealed that mean Cu concentrations in hair and urine samples were ranged from 5.13 to 28.85mgkg^-1 and 19.90 to 54.61μgL^-1 in the three villages, respectively. Significant correlation between hair Cu concentrations and the CDI of Cu indicated food ingestion had adverse effects on the health of the local residents. The result suggested that nonferrous metal smelter should be away from residential area and locally produced crops became unsuitable for consumption. Therefore, effective measures on Cu pollution management and control in the surrounding area should be formulated and implemented.

Assessment of Mercury Concentration in Turtles (Podocnemis unifilis) in the Xingu River Basin, Brazil

Many studies on mercury contamination in aquatic biota deal with the effect of consuming metal-contaminated organisms on human health. In this study, we examined the factors that cause mercury contamination in Podocnemis unifilis in the Xingu River Basin of Mato Grosso and Pará States, Brazil. We quantified by atomic absorption spectroscopy with cold vapor the total mercury (THg) content in the liver and muscle samples of 50 Podocnemis unifilis specimens collected from the basin. The liver and muscle samples contained 134.20 ± 119.30 ng g−1 THg and 24.86 ± 26.36 ng g−1 THg, respectively. Each chelonian or meal has, on average, 5.34× more Hg than the highest level established as acceptable. From the results it can be inferred that, given the weekly consumption of chelonians, the riverine and indigenous communities in the Xingu River Basin are at risk of chronic consumption of Hg in amounts beyond the acceptable limit. The potential high risk to the health of this population is evident; however, the risk classification needs to be further studied.

Dietary copper and human health: Current evidence and unresolved issues

Although copper (Cu) is recognized as an essential trace element, uncertainties remain regarding Cu reference values for humans, as illustrated by discrepancies between recommendations issued by different national authorities. This review examines human studies published since 1990 on relationships between Cu intake, Cu balance, biomarkers of Cu status, and health. It points out several gaps and unresolved issues which make it difficult to assess Cu requirements. Results from balance studies suggest that daily intakes below 0.8 mg/day lead to net Cu losses, while net gains are consistently observed above 2.4 mg/day. However, because of an incomplete collection of losses in all studies, a precise estimation of Cu requirements cannot be derived from available data. Data regarding the relationship between Cu intake and potential biomarkers are either too preliminary or inconclusive because of low specificity or low sensitivity to change in dietary Cu over a wide range of intakes. Results from observation and intervention studies do not support a link between Cu and a risk of cardiovascular disease, cognitive decline, arthritis or cancer for intakes ranging from 0.6 to 3mg/day, and limited evidence exists for impaired immune function in healthy subjects with a very low (0.38 mg/day) Cu intake. However, data from observation studies should be regarded with caution because of uncertainties regarding Cu concentration in various foods and water. Further studies that accurately evaluate Cu exposure based on reliable biomarkers of Cu status are needed.

Biomonitoring of 20 elements in urine of children. Levels and predictors of exposure

The levels of 20 elements in the urine of one hundred twenty children (Ages 6-11) from an agricultural and an urban area of Valencia Region, Spain, were assessed. The seven essential elements analysed (Co, Cu, Mn, Mo, Se, V, Zn) presented average concentrations (geometric mean) ranging from 0.22 µg L(-1) to 63 µg L(-1) (except Zn with 525 µg L(-1)). Eight out of the 13 toxic elements determined (As, Ba, Cd, Cs, Ni, Pb, Tl, Hg) had frequencies of detection of 100%, with geometric mean concentrations from 0.17 µg L(-1) (Cd) to 33.6 µg L(-1) (As). About 18% of children revealed urinary levels of total As higher than the normal range of 100 µg L(-1) accepted by the ATSDR. The urine analysis was combined with a survey to evaluate variations between subgroups and potential predictors of metal exposure in children population. For socio-demographic variables, age was the main exposure determinant for the majority of selected elements (p < 0.05-0.001), with higher concentrations in younger children (6-8 years). Significant differences were also obtained between the rural and urban area studied for As, Co, Cs, Se, U and Hg, with higher levels in children living in the urban area. In relation to diet, statistically significant higher levels of Hg (p < 0.01, median = 1 µg g(-1) creatinine) and Se (p < 0.05, median = 60.3 µg g(-1) creatinine) were obtained for children with elevated fish consumption, and lower levels of Cd, Ni, Se and V were found (p < 0.05-0.01) in children with high consumption of dairy products.

Effect of 6-month caloric restriction on Cu bound to ceruloplasmin in adult overweight subjects

In a randomized clinical trial of calorie restriction (CR), we demonstrated that important cardiovascular disease (CVD) biomarkers were favorably influenced by CR alone and in conjunction with physical exercise. The aim of this study was to examine the effects of CR with or without exercise on copper bound to ceruloplasmin (CuCp), a well-known biomarker for CVD, in overweight men and women enrolled in the CALERIE phase 1 study. Forty-six individuals were randomized to one of four groups for 6 months: control, healthy weight maintenance; CR, 25% CR from baseline energy requirements; CR+exercise, 12.5% CR and 12.5% through aerobic exercise; and low-calorie diet, low-calorie diet until 15% reduction in body weight followed by weight maintenance diet. CuCp was determined in fasting blood samples by a high-performance liquid chromatography-inductively coupled plasma mass spectrometry methodology and compared with changes in body composition and markers of CVD. After 6 months, CR combined with exercise induced a decrease in plasma concentration of CuCp. CuCp was inversely correlated with insulin sensitivity at baseline and after 6 months of intervention. A cluster analysis showed that the percent change of weight after 6 months of intervention was the most important variable that could discriminate the intervention groups. The percent change of CuCp was the only other variable selected by the analysis. Decreased CuCp in overweight subjects by CR combined with exercise suggests a positive effect of this intervention on metabolic health. Further studies to explain the relationship between weight loss and CuCp and its relevance for cardiovascular health are needed.

Trace elements in dialysis

In end-stage chronic kidney disease (CKD), pediatric nephrologists must consider the homeostasis of the multiple water-soluble ions that are influenced by renal replacement therapy (RRT). While certain ions such as potassium and calcium are closely monitored, little is known about the handling of trace elements in pediatric dialysis. RRT may lead to accumulation of toxic trace elements, either due to insufficient elimination or due to contamination, or to excessive removal of essential trace elements. However, trace elements are not routinely monitored in dialysis patients and no mechanism for these deficits or toxicities has been established. This review summarizes the handling of trace elements, with particular attention to pediatric data. The best data describe lead and indicate that there is a higher prevalence of elevated lead (Pb, atomic number 82) levels in children on RRT when compared to adults. Lead is particularly toxic in neurodevelopment and lead levels should therefore be monitored. Monitoring of zinc (Zn, atomic number 30) and selenium (Se, atomic number 34) may be indicated in the monitoring of all pediatric dialysis patients to reduce morbidity from deficiency. Prospective studies evaluating the impact of abnormal trace elements and the possible therapeutic value of intervention are required.

Assessment of indirect human exposure to environmental sources of nickel: oral exposure and risk characterization for systemic effects

This paper describes the indirect human exposure to Ni via the oral route for the regional scale in the EU, together with a method to assess additional local exposure from industrial emissions. The approach fills a gap in the generic REACH guidance which is inadequate for assessing indirect environmental exposure of metals. Estimates of regional scale Ni dietary intake were derived from Ni dietary studies performed in the EU. Typical and Reasonable Worst Case dietary Ni intakes for the general population in the EU were below the oral Derived No Effect Level (DNEL) of Ni sulfate for systemic effects. Estimates for the Ni dietary intake at the local scale take into account the influence of aerial Ni deposition and transfer from soil to crops grown near industrial plants emitting Ni. The additional dietary exposure via this local contribution was small. Despite the use of conservative parameters for these processes, this method may underestimate dietary exposure around older industrial sites because REACH guidance does not account for historical soil contamination. Nevertheless, the method developed here can also be used as a screening tool for community-based risk assessment, as it accounts for historical soil pollution. Nickel exposure via drinking water was derived from databases on Ni tap water quality. A small proportion of the EU population (<5%) is likely to be exposed to tap water exceeding the EU standard (20 μg Ni/l). Taking into account the relative gastrointestinal absorption of Ni from water (30%) versus from solid matrices (5%), water intake constitutes, after dietary intake, the second most important pathway for oral Ni intake. Incidental ingestion of Ni from soil/dust at the regional scale, and also at the local scale, was low in comparison with dietary intake.

Estimation of Copper Intake in Moderate Wine Consumers in Croatia

To estimate Cu exposure level from wine consumption and to assess possible health risk for moderate wine consumers, wine samples were collected from different wine-growing areas of Croatia. Median concentrations were 180 μg L-1, range (76 to 292) μg L-1, in commercial wines and 258 μg L-1, range (115 to 7600) μg L-1, in homemade wines (P>0.05). Maximum permitted level of 1000 μg L-1was exceeded in three homemade wines. However, daily intake of Cu from wine (in the range from 0.02 mg d-1to 1.52 mg d-1) estimated from Cu concentration in all wine samples is lower than the tolerable upper intake level of 5 mg d-1proposed by the EU Scientific Committee on Food and does not present a risk to moderate wine consumers.

Copper in household drinking water in the city of Zagreb, Croatia

Copper concentration was estimated in tap water samples obtained from 70 households in Zagreb, serviced by a public water supply system. First-draw and flushed samples of tap water were collected in the morning and total copper concentration was determined by graphite furnace atomic absorption spectrometry with Zeeman-effect background correction. We also estimated the contribution of plumbing material to copper concentrations in tap water. In households with copper pipes, median and range copper values were 310 μg L-1 [(27 to 632) μg L-1] in first-draw samples and 16 μg L-1 [(5 to 52) μg L-1] in flushed samples. Corresponding values for households with galvanised pipes were 140 μg L-1 [(11 to 289) μg L-1] and 8 μg L-1 [(1 to 42) μg L-1], respectively. Copper concentrations in household tap water in Zagreb were far below the proposed safe limits set by the Croatian and WHO regulations and EPA standards, and drinking water in Zagreb is not a significant source of copper exposure.

Essentiality and toxicity in copper health risk assessment: overview, update and regulatory considerations

Copper (Cu), an essential element required as a cofactor and/or structural component of numerous metalloenzymes, is uniquely positioned as a case study for issues associated with the essential metals health risk assessment, because of its extensive database. Essential elements pose distinct challenges when establishing regulatory guidelines because too little as well as too much intake can produce adverse health consequences and the dose-response curve is roughly U-shaped. Thus, conventional health risk assessment paradigms do not apply to essential elements; the dose-response assessment needs to define an acceptable range of oral intake (AROI) which prevents deficiency by meeting nutritional requirements while avoiding toxicity due to high intakes. The conceptual framework for this type of risk assessment includes consideration of biological processes that are unique to essential elements-homeostasis, basal and normative nutritional requirements, bioavailability, and nutrient-nutrient interactions. In this paper, the Cu database on physiology, deficiency, and excess is briefly reviewed in order to establish the range of potential health hazards associated with varying levels of intake. Issues discussed include the (1) development of suitable dose-response methodologies, including appropriate dose and response metrics, for Cu; (2) categorization of severity of response and functional significance; (3) use of endpoints of similar severity and functionality for deficiency and excess in dose-response assessment; (4) development of valid biomarkers for subclinical effects, exposures and susceptibilities. Guideline values for Cu intake have been established by nutritional and toxicologic regulatory or advisory boards. Although regulators are more concerned with the potential human toxicity arising from excessive Cu intake, the preponderance of evidence suggests that deficiency is more of a public health concern than excess.

Selective recovery of Cr and Cu in leachate from chromated copper arsenate treated wood using chelating and acidic ion exchange resins

The purpose of this study was to selectively remove chromium and copper from CCA-treated wood acid leachates (initial concentrations of 447-651 mg As l(-1), 374-453 mg Cu l(-1) and 335-622 mg Cr l(-1)) using ion exchange resins and precipitation techniques. Batch experiments revealed that the chelating resin Dowex M4195 had a high copper selectivity in the presence of chromium while the Amberlite IR120 resin had a high chromium sorption capacity. Combining M4195 and IR120 resins in four successive columns, made with Plexiglas tube, led to 96% copper extraction and 68% chromium extraction. NH(4)OH (4M) efficiently eluted copper from the chelating resin while H(2)SO(4) (10%v/v) was used for IR120 resin elution. Copper and chromium recovery by elution reached 94% and 81%, respectively. Successive sorption and elution steps using M4195 and IR120 ion exchange resins presented similar metal removal capacities over the five cycles. No resin deterioration was observed but the results suggested arsenic bulk diffusion into the M4195 resin. Successive treatments of CCA-treated wood leachate with M4195 and IR120 allowed for copper and chromium removal while arsenic could be extracted by coagulation treatment with ferric chloride and precipitation with Ca(OH)(2) at pH 5.7. This final process led to 99.9% arsenic removal. The final effluent contained less than 1 mg l(-1) of arsenic, chromium and copper.

Dietary exposure estimates of twenty-one trace elements from a Total Diet Study carried out in Pavia, Northern Italy

The significant role of trace elements in human health is well documented. Trace elements are those compounds that need to be present in the human diet to maintain normal physiological functions. However, some microelements may become harmful at high levels of exposure, or, on the other hand, may give rise to malnutrition, when their exposure is too low. The aim of the present study was to provide a reliable estimate of the dietary exposure of twenty-one trace elements in a Northern Italian area. For this purpose, trace element analyses were undertaken on total diet samples collected from a university cafeteria in Pavia, Northern Italy. The average daily exposure for the adult people was calculated on the basis of food consumption frequency, portion size and trace element levels in foodstuffs. The mean exposure values satisfy the Italian RDA for all the essential trace elements, except for Fe exposure in females, and are well below the Provisional Tolerable Daily Intake for all the toxic compounds, showing that the probability of dietary exposure to health risks is overall small. As far as Fe exposure is concerned, a potential risk of anaemia in the female adult population should be considered, then studies aimed at evaluating the Fe nutritional status of adult Italian women should be addressed. In conclusion, while not excluding the possibility that the daily exposure determined in the present study may not be representative of the population as a whole, this study provides a good estimate of the Italian adult consumer exposure to twenty-one trace elements.

Cobalt and secondary poisoning in the terrestrial food chain: data review and research gaps to support risk assessment

Cobalt is a naturally occurring element found in rocks, soil, water, plants, and animals and has diverse industrial importance. It is cycled in surface environments through many natural processes (e.g. volcanic eruptions, weathering) and can be introduced through numerous anthropogenic activities (e.g. burning of coal or oil, or the production of cobalt alloys). The environmental behaviour of cobalt in terrestrial environment is relatively poorly studied and in particular where Co is used in industrial processes, the baseline information to support wider and long-term environmental impacts is widely dispersed. To support the adoption of new EU regulations on the risk assessment of chemicals, we review here the various aspects of the environmental chemistry, fate and transport of Co across environmental interfaces and discuss the toxicology and potential for bio magnification and food chain accumulation. The soil-to-plant transfer of Co appears to be viable route to expose lower trophic levels to biologically significant concentrations and Co is potentially accumulated in biomass and top soil. Evidence for further accumulation through soil-invertebrate transfer and to higher trophic levels is suggested by some studies but this is obscured by the relatively high variability of published transfer data. This variation is not due to one particular aspect of the transfer of Co in terrestrial environments. Influences are from the variability of geological sources within soil systems; the sensitivity of Co mobility to environmental factors (e.g. pH) and the variety of life strategies for metal elimination/use within biological species. Toxic effects of Co have been suggested for some soil-plant animal studies however, uncertainty in the extrapolation from laboratory to field is a major limitation.