Solubility of indium-tin oxide in simulated lung and gastric fluids: Pathways for human intake

The Cytotoxicity of Tungsten Ions Derived from Nanoparticles Correlates with Pulmonary Toxicity

Tungsten carbide nanoparticles (nano-WC) are prevalent in composite materials, and are attributed to their physical and chemical properties. Due to their small size, nano-WC particles can readily infiltrate biological organisms via the respiratory tract, thereby posing potential health hazards. Despite this, the studies addressing the cytotoxicity of nano-WC remain notably limited. To this purpose, the BEAS-2B and U937 cells were cultured in the presence of nano-WC. The significant cytotoxicity of nano-WC suspension was evaluated using a cellular LDH assay. To investigate the cytotoxic impact of tungsten ions (W⁶⁺) on cells, the ion chelator (EDTA-2Na) was used to adsorb W⁶⁺ from nano-WC suspension. Subsequent to this treatment, the modified nano-WC suspension was subjected to flow cytometry analysis to evaluate the rates of cellular apoptosis. According to the results, a decrease in W⁶⁺ could mitigate the cellular damage and enhance cell viability, which indicated that W⁶⁺ indeed exerted a significant cytotoxic influence on the cells. Overall, the present study provides valuable insight into the toxicological mechanisms underlying the exposure of lung cells to nano-WC, thereby reducing the environmental toxicant risk to human health.

Heavy metal concentrations in wild and farmed gilthead sea bream from southern Mediterranean Sea-human health risk assessment

Arsenic, cadmium, copper, lead, and zinc concentrations in the edible part of wild and farmed Sparus aurata from Algerian coastal were determined. The highest concentrations of cadmium (0.0078 mg kg^-1 wet weight), copper (0.98 mg kg^-1 w.w), and zinc (5.1 mg kg^-1 w.w) were recorded in farmed sea bream, whereas the highest arsenic (5.02 mg kg^-1 w.w) and lead (0.006 mg kg^-1 w.w) levels were registered in wild one. The statistical analysis (Friedman test, p < 0.05) indicated that the origin of fish (wild, farmed in a cage, and farmed in raceway) has relevance to the distribution of metal. Estimated weekly intake of inorganic arsenic, cadmium, and lead for a 72.5-kg person consuming Sparus aurata from Algeria does not exceed 1% of the WHO/JECFA recommended rate for all metals, certainly due to the limited consumption of seafood products by the local population. The total target hazard index is far less than "one" 1, and the carcinogenic risk for arsenic exceeds the acceptable value of 10^-5. Based on the result of this study, the potential risk to human health from the consumption of contaminate farmed sea bream (in the cage) should be considered.

Simulated biological fluids - a systematic review of their biological relevance and use in relation to inhalation toxicology of particles and fibres

The use of simulated biological fluids (SBFs) is a promising in vitro technique to better understand the release mechanisms and possible in vivo behaviour of materials, including fibres, metal-containing particles and nanomaterials. Applications of SBFs in dissolution tests allow a measure of material biopersistence or, conversely, bioaccessibility that in turn can provide a useful inference of a materials biodistribution, its acute and long-term toxicity, as well as its pathogenicity. Given the wide range of SBFs reported in the literature, a review was conducted, with a focus on fluids used to replicate environments that may be encountered upon material inhalation, including extracellular and intracellular compartments. The review aims to identify when a fluid design can replicate realistic biological conditions, demonstrate operation validation, and/or provide robustness and reproducibility. The studies examined highlight simulated lung fluids (SLFs) that have been shown to suitably replicate physiological conditions, and identify specific components that play a pivotal role in dissolution mechanisms and biological activity; including organic molecules, redox-active species and chelating agents. Material dissolution was not always driven by pH, and likewise not only driven by SLF composition; specific materials and formulations correspond to specific dissolution mechanisms. It is recommended that SLF developments focus on biological predictivity and if not practical, on better biological mimicry, as such an approach ensures results are more likely to reflect in vivo behaviour regardless of the material under investigation.

Exposure profiles of workers from indium tin oxide target manufacturing and recycling factories in Taiwan

Indium tin oxide exposure poses a potential health risk, but the exposure assessment in occupational setting remains incomplete and continues to be a significant challenge. To this end, we investigated the association of work type, airborne indium concentration, respirable fraction of total indium, and cumulative indium exposure index (CEI) with the levels of plasma indium (P-In) and urinary indium (U-In) among 302 indium tin oxide target manufacturing and recycling workers in Taiwan. We observed that recycling-crushing produced the highest concentrations of total indium (area: 2084.8 μg/m³; personal: 3494.5 μg/m³) and respirable indium (area: 533.4 μg/m³; personal: 742.0 μg/m³). Powdering produced the highest respirable fraction of total indium (area: 58.6%; personal: 81.5%), where the workers had the highest levels of P-In (geometric mean: 2.0 μg/L) and U-In (1.0 μg/g creatinine). After adjusting for the confounder, the CEIs of powdering (β_PR = 0.78; β_PR = 0.44), bonding (β_PT = 0.61; β_PT = 0.37), and processing workers (β_PT = 0.43; β_PT = 0.28) showed significant associations with P-In and U-In, validating its utility in monitoring the exposure. Also, the respirable fraction of total indium significantly contributed to the increased levels of P-In and U-In among workers. The varying levels of relationship noted between indium exposure and the levels of P-In and U-In among workers with different work types suggested that setting the exposure limits among different work types is warranted.

Enrichment Mechanisms of Gallium and Indium in No. 9 Coals in Anjialing Mine, Ningwu Coalfield, North China, with a Preliminary Discussion on Their Potential Health Risks

To provide a comprehensive insight into the enrichment mechanism of gallium and indium in No. 9 coals, eighteen samples were collected from Anjialing mine, Ningwu Coalfield, Shanxi Province for coal petrological, mineralogical and geochemical analyses. The results suggested that Ga and In enrichment mainly hosted in the top horizons, with average concentration coefficients of 8.99 and 2.73 respectively, compared with the rest of horizons (2.46 for Ga and 1.69 for In). Source apportionment indicated that Ga and In were mainly derived from bauxite of Benxi Formation in Yinshan Oldland, while In could originate from felsic magmatic rocks in Yinshan Oldland as well. In addition, weak oxidation condition, medium to intensive weathering, transgression and input of terrestrial higher plants had positive effects on Ga and In enrichment. With the rapid expansion of emerging electronics manufacturing, Ga and In, of which potential risks on human health were neglected previously, were recently considered as hazardous elements. Therefore, this paper also discussed the potential pathways that these elements threatened human health. We suggested that potential risks on environment and human health caused by Ga and In enrichment in coals and coal-related products should be taken into account besides their economic value.

Indium oxide nanoparticles induce lung intercellular toxicity between bronchial epithelial cells and macrophages

Concerns have been raised over the safety and health of industrial workers exposed to indium oxide nanoparticles (IO-NPs) when working. IO-NPs were previously shown in vitro and in vivo to be cytotoxic, but the mechanism of pathogenesis was unclear. In this study, the effects of IO-NPs on lung cells associated with respiratory and immune barriers and the toxic effects of intercellular cascades were studied. Here IO-NPs had acute toxicity to Wistar rats over a time course (5 days post-intratracheal instillation). Following treatment epithelial cells (16HBE) or macrophages (RAW264.7) with IO-NPs or IO fine particles (IO-FPs), the damage of 16HBE cells caused by IO-NPs was serious, mainly in the mitochondrial and rough endoplasmic reticulum. The lactate dehydrogenase level also showed that cytotoxicity in vitro was more serious for IO-NPs compared with IO-FPs. The level of In³⁺ (examined by inductively coupled plasma mass spectrometry) in 16HBE cells was 10 times higher than that in RAW cells. In³⁺ , releasing from IO-NPs absorbed by 16HBE cells, could not only significantly inhibit the phagocytosis and migration of macrophages (P < .0001), but also stimulate RAW cells to secrete high levels of inflammatory cytokines. IO-NPs can directly damage pulmonary epithelial cells. The In³⁺ released by epithelial cells affect the phagocytosis and migration of macrophages, which may be a new point for the decrease in the clearance of alveolar surfactants and the development of IO-related pulmonary alveolar proteinosis.

Degradation process regulation of waste LCD panel to ensure the remain of indium in solid phase by hydrothermal reaction

The environmental risks and recycling potential of organic materials and indium of waste LCD panel has produced commercial value. It has been found that hydrothermal reaction can achieve an efficient and clean degradation of organic materials in a closed environment. However, as the degradation process occurs, the glass substrate is gradually exposed to the hydrothermal environment. Whether the metal indium is dissolved into the liquid phase and whether it affects product quality and the subsequent leaching process need to be discussed. In present study, simultaneous organic materials degradation and pretreatment of indium recycling was achieved due to the regulation of parameters. Effects of reaction temperature, reaction time, H₂O₂ supply and pH of the reaction solution on the transfer of indium in liquid and solid phase were investigated. The results showed that the degradation rate of the organic material reach 90% under the neutral condition of 300℃ of reaction temperature, 36 mL of water and 7.2 mL of H₂O₂ supply and 11 min of reaction time. This pretreatment method effectively realized the resource recovery of waste LCD panel and the outflow of metal indium was inhibited at the same time, thus further comprehensive recycling of resources could be prepared.

Characterisation of secondary metal-bearing phases in used dental amalgam and assessment of gastric solubility

Detailed SEM/EDS investigation of used dental amalgams was carried out in order to characterise morphology and chemical composition of secondary metal-bearing phases resulting from long-term exposure of dental amalgam to oral environment, and assess their solubility in gastric environment. The investigation revealed numerous secondary phases, represented by compositionally and morphologically complex Hg-, Cu-, Sn-, Ag-, Zn-bearing sulphides and oxides/hydroxides, while sulphates and phosphates are scarce. Secondary metal-bearing phases mostly occur at the amalgam/tooth interface; however, some phases were found only on the occlusal surfaces of amalgam. Secondary phases mostly form porous aggregates of minute crystallites and micro- or nanocrystalline crusts. In oral environment, these phases are mostly stable and represent trapping media for dissolved potentially toxic metals released during amalgam corrosion. Simplified PHREEQC calculations of solubility of secondary metal-bearing phases in aqueous environment under conditions similar to those in gastric environment showed that secondary phases are more soluble in gastric environment than in oral solutions, which is mostly due to their forms of occurrence. Secondary phases in gastric environment thus act as secondary sources of potentially toxic metals, particularly Sn, Zn and also Cu, which are released both under reducing and oxidising conditions especially in acidic environment. Only very small amounts of Hg are potentially released and should not represent serious threat. Secondary phases that contribute the most to bioaccessibility of these metals are Sn hydroxychlorides, Sn oxides/hydroxides, Sn sulphates/hydroxysulphates, Sn oxides, Zn sulphides and Cu sulphides (Cu₂S).

Application of the ICRP respiratory tract model to estimate pulmonary retention of industrially sampled indium-containing dusts

Inhalation of indium-containing dusts is associated with the development of indium lung disease. Workers may be exposed to several different chemical forms of indium; however, their lung dosimetry is not fully understood. We characterized the physicochemical properties and measured the lung dissolution kinetics of eight indium-containing dusts. Indium dissolution rates in artificial lung fluids spanned two orders of magnitude. We used the International Commission on Radiological Protection (ICRP) human respiratory model (HRTM) to estimate pulmonary indium deposition, retention and biokinetic clearance to blood. For a two-year (median workforce tenure at facility) exposure to respirable-sized particles of the indium materials, modeled indium clearance (>99.99% removed) from the alveolar-interstitial compartment was slow for all dusts; salts would clear in 4 years, sintered indium-tin oxide (ITO) would clear in 9 years, and indium oxide would require 48 years. For this scenario, the ICRP HRTM predicted that indium translocated to blood would be present in that compartment for 3.5-18 years after cessation of exposure, depending on the chemical form. For a 40-year exposure (working lifetime), clearance from the alveolar-interstitial compartment would require 5, 10 and 60 years for indium salts, sintered ITO and indium oxide, respectively and indium would be present in blood for 5-53 years after exposure. Consideration of differences in chemical forms of indium, dissolution rates, alveolar clearance and residence time in blood should be included in exposure assessment and epidemiological studies that rely on measures of total indium in air or blood to derive risk estimates.