Distributions and multiple sources of chlorinated polycyclic aromatic hydrocarbons in the air over Japan

Efficient and low-energy degradation of chlorobenzene via catA-mediated cleavage and bedC1 docking in a novel Burkholderia stabilis TF-2

In this study, a novel strain Burkholderia stabilis TF-2 capable of assimilatory and co-metabolic degradation of chlorobenzenes was obtained. The interaction between chlorobenzene (CB) and target enzymes, as well as the metabolic pathways in TF-2, were elucidated using multi-omics and molecular docking techniques. Results of degradation experiments indicated that TF-2 assimilated CB at a rate of 0.22-0.66 mg·gcell-1·h-1 in concentrations of 20-200 mg L-1. Additionally, TF-2 also used sodium succinate and sodium citrate as substrates to co-metabolize CB, with degradation rates of 0.26-2.00 and 0.31-1.72 mol·gcell-1·h-1, respectively. Whole-genome sequencing revealed over 18 novel genes associated with aromatic hydrocarbon degradation in TF-2. Transcriptomic analysis showed that CB induced the high expression of 119 genes involved in CB metabolism and late mineralization. The significant up-regulation of the bedC1 (encoding a ring-hydroxylated dioxygenase), CatA (chlorocatechol 1,2-dioxygenase), pcaJ (3-oxoadipate CoA-transferase alpha subunit) and fadA (acetyl-CoA acyltransferase) genes facilitated CB metabolism. Based on these findings, a metabolic pathway for CB was constructed, with the key step involving ortho cleavage of the aromatic ring under the action of the catA gene. Furthermore, molecular docking revealed that CB bound to bedC1 with -4.5 kcal mol-1 through hydrophobic bonds, π-stacking, and a halogen bond. These results provide strong support for development of efficient strains to enhance the removal of chlorinated organic compounds.

Voyaging of halogenated polycyclic aromatic hydrocarbons, an emerging group of pollutants, on micro-mesoplastics in the marine environment

The limited existing research on the accumulation of hazardous chlorinated and brominated polycyclic aromatic hydrocarbons (ClPAHs and BrPAHs) in micro-mesoplastics (mMPs) motivated this investigation. We collected mMPs from the coastal environments of Sri Lanka and Japan. Out of 75 target compounds analyzed, 61 were detected, with total parent PAH concentrations reaching 16,300 and 1770 ng/g plastic in Sri Lanka and Japan, respectively. The total parent PAH concentrations in mMPs from the southern Sri Lankan coastline were relatively higher than those from the eastern coastline. Phenanthrene and naphthalene were the dominant parent PAH congeners in most mMP samples. Chlorinated pyrenes and brominated naphthalene were predominant among halogenated PAHs. The estimated toxic equivalency quotient (TEQ) ranged from 0.67 to 1057 ng-TEQ/g plastic, with the highest levels observed in polystyrene (PS) particles from the southern Sri Lankan coast. Benzo[a]pyrene and dibenzo[a,h]anthracene exhibited elevated TEQ for parent PAHs, whereas dichloropyrene, and dibromopyrene represented the highest TEQs for ClPAHs and BrPAHs, respectively. The data evidenced that several HPAH congeners can increase the PAH-like toxicity (∼86%) in mMPs. This study provides insights into the accumulation of parent and halogenated PAHs in mMPs, highlighting their potential combined implications in marine and terrestrial ecosystems.

Investigating industrial PAH air pollution in relation to population exposure in major countries: A scoring approach

Polycyclic aromatic hydrocarbons (PAHs) are common air pollutants worldwide, associated with industrial processes. In the general population, both modeling and field studies revealed a positive correlation between air PAH concentrations and urinary PAH metabolite levels. Many countries lack population urinary data that correspond to local PAH air concentrations. Thus, we proposed a scoring-based approximate approach to investigating that correlation in selected countries, hypothesizing that PAH air concentrations in selected regions could represent the national air quality influenced by industrial emission and further correlate to PAH internal exposure in the general population. This research compiled 85 peer-reviewed journal articles and 9 official monitoring datasets/reports covering 34 countries, 16 of which with both atmospheric PAH data and human biomonitoring data. For the air pollution score (AirS), Egypt had the highest AirS at 0.94 and Pakistan was at the bottom of the score ranking at -1.95, as well as the median in the UK (AirS: 0.50). For the population exposure score (ExpS), China gained the top ExpS at 0.44 and Spain was with the lowest ExpS of -1.52, with the median value in Italy (ExpS: 0.43). Through the correlation analysis, atmospheric PAHs and their corresponding urinary metabolites provided a positive relationship to a diverse extent, indicating that the related urinary metabolites could reflect the population's exposure to specific atmospheric PAHs. The findings also revealed that in the 16 selected countries, AirS indexes were positively correlated with ExpS indexes, implying that higher PAH levels in the air may lead to elevated metabolite urinary levels in general populations. Furthermore, lowering PAH air concentrations could reduce population internal PAH exposure, implying that strict PAH air regulation or emission would reduce health risks for general populations. Notably, this study was an ideal theoretical research based on proposed assumptions to some extent. Further research should focus on understanding exposure pathways, protecting vulnerable populations, and improving the PAH database to optimize PAH pollution control.

Approaches to the source evaluation of chlorinated polycyclic aromatic hydrocarbons in fine particles

Chlorinated polycyclic aromatic hydrocarbons (ClPAHs) have been recognized as novel hazardous pollutants; however, the dominant sources remain unclear. This study investigates the occurrences of ClPAHs in five stages of size-segregated particles collected from an urban site and evaluates the sources and factors affecting the concentrations using organic and inorganic source tracers. ClPAHs are the most frequently detected in the finest particle fraction (less than 1.1 µm; PM1.1), similar to polycyclic aromatic hydrocarbons (PAHs), hopanes, and levoglucosan (LEV). The concentrations of total ClPAHs in PM1.1 shows a significant correlation (p < 0.05) with those of total PAHs and specific hopanes but not to LEV and biogenic fatty acids; this suggests that ClPAHs dominantly originate from industrial activities and vehicular emissions. Heatmap analysis, including source tracers, is used to categorize the possible sources of ClPAHs into three types: ClPAH-specific sources, local industrial activities and vehicular emissions, and remote industrial activities. Furthermore, correlation network analysis is used to clarify the relationships between the pollutants.

Presence of Halogenated Polycyclic Aromatic Hydrocarbons in Milk Powder and the Consequence to Human Health

Recent reports of the presence of halogenated derivatives of polycyclic aromatic hydrocarbons (PAHs) in human foods of animal origin, such as chlorinated (ClPAHs) and brominated (BrPAHs) PAHs, suggest that their contamination in dairy products may also pose a human health risk. This study used GC/Orbitrap-MS to analyze 75 congeners of halogenated PAHs and parent PAHs in milk and creaming powder samples commonly found in grocery stores in Sri Lanka and Japan. Our investigation revealed a total of 31 halogenated PAHs (HPAHs) in the samples. The concentrations of total parent PAHs in the samples from Sri Lanka and Japan ranged from not detected (n.d.)−0.13 and <0.001−16 ng/g dry weight (d.w.). Total ClPAHs and BrPAHs in the samples ranged from 0.01−3.35 and 1.20−5.15 ng/g (d.w.) for Sri Lanka, and 0.04−2.54 and n.d.−2.03 ng/g d.w. for Japan, respectively. The ClPAHs were dominated by chlorinated-pyrene, -fluoranthene, and -benzo[a]pyrene congeners, whereas the BrPAHs were dominated by brominated-naphthalene and -pyrene congeners. The toxic assessment estimated based on the intake of toxic equivalency quotients (TEQs) for target compounds in milk powders revealed that HPAHs might contribute additively to the PAHs-associated health risk to humans, indicating that more research is needed.

Pah levels in the soil-litter-vegetation-atmosphere system of Atlantic Forest remnants in Southeast Brazil

Although the Brazilian Atlantic Forest is a hotspot for biodiversity conservation, it is one of the most fragmented biomes in Brazil and also affected by air pollutants such as polycyclic aromatic hydrocarbons (PAHs). The study aimed at measuring the PAH levels in leaf trees, litter, soil, and atmosphere of two Atlantic Forest remnants impacted by air pollutants during summer and winter periods; identifying emission sources; and investigating the relationship among the PAH concentrations in the soil, litter, leaves, and atmosphere. Site 1 is situated in the largest South American city, with rainy summers and dry winters, and characterized by intense urbanization. Site 2 is situated in a large forest continuum and is characterized by wet climate with no defined dry seasons. It is more distant from the anthropogenic urban sources than site 1, but closer to an industrial complex. No differences were detected for PAH amounts (summer + winter) in the particles and wet deposition fluxes between sites. In site 1, the highest concentrations of PAHs in the particles were measured during the winter while in the leaf trees were measured during the summer. PMF model showed that sites 1 and 2 receive PAHs mainly from vehicle emissions and industrial activities, respectively. The accumulation of heavier compounds in soil and leaves via wet deposition was more evident in site 2. PAHs were mainly stored in the soil of site 1, contrasting with site 2, where they were retained in litter, which were attributed to disturbances of decomposer community and reduced decomposition rates.

Environmental profile, distributions and potential sources of halogenated polycyclic aromatic hydrocarbons

Halogenated polycyclic aromatic hydrocarbons (HPAHs) are high lipophilic and degradation-resistant, which have been detected in the air, water, sediment and biota. HPAHs tend to have strong adverse effects on animals and humans. Although we have realized HPAHs are emerging contaminants which needs to be paid attention, there is still a lack of their individual commercial standards. This makes it difficult for understanding HPAHs comprehensively. This review is devoted to collect all the results have reported, and give a systemic look of their global distributions, influence factors and sources. Compared with air, studies on other environmental matrices (water and sediment) are more limited. The researches on organisms are fewest. Comparing the studied congeners, there are more studies on ClPAHs than BrPAHs. Human activities contribute mostly to their occurrence. Further, we then also introduce the toxicity and analytical methods to better understand HPAHs. The future research directions are also provided. Through this review, we can conclude there is an urgent need to develop analysis methods and ecologic risk assessment for better exploring HPAHs. Effective methods should be done to control HPAHs. Therefore, this review can provide a good basis for researchers to understand and control global pollution.

Halogenated polycyclic aromatic hydrocarbons in edible aquatic species of two Asian countries: Congener profiles, biomagnification, and human risk assessment

Seventy-five contaminants including chlorinated/brominated/parent polycyclic aromatic hydrocarbons (Cl/Br/PAHs) were investigated in 29 edible aquatic species from the Indian Ocean near Sri Lanka and 10 species from the Pacific Ocean near Japan. Concentrations of total ClPAHs and BrPAHs in the samples were 2.6-57 and 0.30-9.5 ng/g-dry weight from the Indian Ocean, and 0.35-18 and 0.03-3.3 ng/g-dry weight from the Pacific Ocean, respectively. Comparing the profiles of Cl/BrPAHs among the samples, congeners of chlorinated and brominated pyrene were predominant components and enhanced the potential for biomagnification in the sample from the off-shore pelagic environment in the Indian Ocean. The incremental lifetime cancer risks estimated by intake of the targets in consuming aquatic organisms showed that approximately one-third of studied organisms exceeded the acceptable risk level for Sri Lankans.

Role of nanocatalyst in the treatment of organochlorine compounds - A review

Since a few centuries ago, organochlorine compounds (OCs) become one of the threatened contaminants in the world. Due to the lipophilic and hydrophobic properties, OCs always discover in fat or lipid layers through bioaccumulation and biomagnification. The OCs are able to retain in soil, sediment and water for long time as it is volatile, OCs will evaporate from soil and condense in water easily and frequently, which pollute the shelter of aquatic life and it affects the function of organs and damage system in human body. Photocatalysis that employs the usage of semiconductor nanophotocatalyst and solar energy can be the possible alternative for current conventional water remediation technologies. With the benefits of utilizing renewable energy, no production of harmful by-products and easy operation, degradation of organic pollutants in rural water bodies can be established. Besides, nanophotocatalyst that is synthesized with nanotechnology outnumbered conventional catalyst with larger surface area to volume ratio, thus higher photocatalytic activity is observed. In contrast, disadvantages particularly no residual effect in water distribution network, requirement of post-treatment and easily affected by various factors accompanied with photocatalysis method cannot be ignored. These various factors constrained the photocatalytic efficiency via nanocatalysts which causes the full capacity of solar photocatalysis has yet to be put into practice. Therefore, further modifications and research are still required in nanophotocatalysts' synthesis to overcome limitations such as large band gaps and photodecontamination.

Simultaneous determination of carcinogenic PAHs and levoglucosan bound to PM2.5 for assessment of health risk and pollution sources during a smoke haze period

Carcinogenic polycyclic aromatic hydrocarbons (cPAHs) in ambient PM_2.5 and a specific molecular marker of biomass burning, levoglucosan, are used to investigate the influence on public health of biomass burning. In this work, we present an effective method for one-time analysis of cPAHs and levoglucosan by GC-MS without derivatization. The method was applied for the analysis of PM_2.5 samples (64.3 ± 17.6 μg m^-3, n = 57) collected during a smoke haze period in Chiang Mai, Thailand. Levoglucosan was analyzed by using both the developed method (GC-MS) and a reference method (HPAEC-PAD) for comparison. Its average concentration obtained from GC-MS (0.31 ± 0.21 μg m^-3) was about 4 times less than the concentration obtained from the reference method (1.22 ± 0.76 μg m^-3). Therefore, a correcting factor (CF = 4) was used as a multiplying factor, to obtain a comparative value (1.23 ± 0.86 μg m^-3). The average concentration of cPAHs found in PM_2.5 samples was 5.88 ± 1.97 ng m^-3 with the highest value of 10.86 ng m^-3 indicating medium to high cancer risk due to PAHs exposure when referring to values of toxicity equivalence and inhalation cancer risk. Diagnostic ratios of BaA/(BaA + CHR) (0.48 ± 0.04) and IND/(IND + BPER) (0.58 ± 0.04) and strong correlations between PM_2.5, levoglucosan and cPAHs concentrations implied that the major source of air pollution in the study period was biomass burning. PM_2.5 concentration as a pollution indicator was labelled as BB-low, BB-medium, BB-high or BB-extreme; <50, 50-75, 75-100 and > 100 μg m^-3, respectively. The levoglucosan and cPAHs concentration during BB-extreme pollution was 4.3 times and 2.34 times, respectively, that during BB-low pollution, and the correlation coefficient (r) between the concentrations of levoglucosan and cPAHs was as high as 0.987, indicating that the more intense the burning of biomass, the higher the carcinogenic risk in the urban air.

Size-distribution-based assessment of human inhalation and dermal exposure to airborne parent, oxygenated and chlorinated PAHs during a regional heavy haze episode

The adverse health effects of haze and particle-bound contaminants in China have recently caused increasing concern, and particle size plays a significant role in affecting human exposure to haze-correlated pollutants. To this background, size-segregated particulate samples (nine size fractions (<0.4, 0.4-0.7, 0.7-1.1, 1.1-2.1, 2.1-3.3, 3.3-4.7, 4.7-5.8, 5.8-9.0 and > 9.0 μm) were collected in three scale-gradient cities in northern China and analysed for a series of parent, oxygenated and chlorinated polycyclic aromatic hydrocarbons (PAHs, O-PAHs and Cl-PAHs). The total geometric mean concentrations of PAHs and O-PAHs for Beijing, Zhengzhou and Xinxiang were 98.1 and 27.2, 77.9 and 77.5, 41.0 and 30.7 ng m^-3, respectively, which were 50-200 times higher than those for Cl-PAHs (0.5, 0.7 and 0.4 ng m^-3). Though unimodal size-distribution patterns were found for all these contaminants for these three cities, PAHs represented distinctly higher concentration levels around the peak fraction (0.7-2.1 μm) than O-PAHs and Cl-PAHs. With 4-6 ring PAHs as dominant components in all samples, the percentage proportion of 2-3 ring PAHs (ranging from 1% to 26%) generally increased with particle size increasing, implying the sources of these compounds varied little among the 9 size fractions in all three cities. The International Commission on Radiological Protection (ICRP) model and permeability coefficient method were synchronously applied to the size-segregated data for inhalation and dermal exposure assessment to intensively estimate the human exposure doses to airborne PAHs. Further, the incremental lifetime cancer risk (ILCR) was calculated and it's found that ILCR from inhalation was higher than that from dermal uptake for children and adults in Beijing and Zhengzhou, while the ILCR for Xinxiang presented a contrary pattern, revealing dermal uptake to be an equally significant exposure pathway to airborne PAHs compared to inhalation.

Risk assessment of polycyclic aromatic hydrocarbons and their chlorinated derivatives produced during cooking and released in exhaust gas

Cooking exhaust gas includes polycyclic aromatic hydrocarbons (PAHs) that are unintentionally generated during cooking, which exposes the cook and others in the vicinity to these toxic compounds. However, information on the occurrence of PAHs, particularly their chlorinated derivatives (ClPAHs), in cooking exhaust gas is limited. Here, we determined the concentrations of 12 PAHs and 20 ClPAHs in cooking exhaust gas emitted during gas-grilling of a Pacific saury using a typical Japanese fish grill in an indoor kitchen. The total concentrations of PAHs and ClPAHs in the cooking exhaust gas were 3400 and 19 ng m^-3, respectively. All 12 PAHs were detected in the cooking exhaust gas, with phenanthrene (2100 ng m^-3), fluorene (630 ng m^-3), and anthracene (200 ng m^-3) detected at the highest concentrations. Four of the 20 ClPAHs were detected, with 9-monochlorinated phenanthrene detected at the highest concentration (12 ng m^-3). The exposure rates for the cook to the PAHs and ClPAHs in the cooking exhaust gas, estimated using the National Institute of Advanced Industrial Science and Technology - Indoor Consumer Exposure Assessment Tool (AIST-ICET), were in the range of 7.2-72 ng-BaP_eq kg^-1 day^-1 (toxic equivalent concentrations relative to the toxicity of benzo[a]pyrene), which was comparable with that for dietary ingestion of cooked foods (54 ng-BaP_eq kg^-1 day^-1). A risk assessment of exposure to PAHs and ClPAHs in cooking exhaust gas in the indoor environment revealed that this gas may pose a health risk to the cook (incremental lifetime cancer risk: 2.1 × 10^-6 to 2.1 × 10^-5), indicating that further investigations are warranted.

PAHs emission source analysis for air and water environments by isomer ratios - Comparison by modified Cohen's d

Possible emission sources of PAHs in air and water environments were discussed by a comparison between the data sets of emission sources and environmental fields using five isomer ratios. The similarity of a pair of the datasets of different sources or environment fields for each isomer ratio was evaluated by a newly developed modified effect size d, and the mean of those for the five isomer ratios was applied as an index of similarity. From the analysis, diesel emission and/or biomass burning residues were considered to be major emission sources for almost all the datasets of environments. The pollution loading and path to the PAHs loading of coastal sediments in Hiroshima bay area were examined and it was inferred emission sources was consistently assigned by these newly developed indicators of isomer ratios. Diesel and/or biomass burning were considered to be major sources for the west side area of the bay and the biomass burning was considered to be for the east side area. Further, it was evaluated the west side area, which confronts the Hiroshima city downtown area more directly, was more similar to diesel, and the east side area, which is a bit remoted to the urban central was more similar to the biomass burning. This newly developed method would be a promising alternative application of isomer ratio analysis.

PAH levels in a furniture-manufacturing city atmosphere

In this study, in order to determine atmospheric PAH concentrations in Inegol/Turkey, ambient air samples were collected from two different sites representing industrial and uncontrolled furniture manufacturers regions. Sampling campaign took place between December 2017 and November 2018. Air samples were collected using high volume air samplers (HVAS) and PAH concentrations were determined in both gas and particulate phases. The mean of the atmospheric PAH concentrations obtained in the gas phase in the furniture workshops (FW) and industrial district (ID) regions were 697.82 ± 637 ng/m³ and 772.92 ± 864.23 ng/m³, respectively. The concentrations in the particulate phase in the regions were 413.52 ± 430.23 ng/m³ and 342.40 ± 527.48 ng/m³, respectively. The average total (gas + particlulate phases) concentration of ∑₁₆PAH determined in the site of FW was 1111.34 ± 1045.24 ng/m³ while that was 772.92 ± 864.23 ng/m³ in ID. These values are over the ambient levels reported for urban sites wherein big industries exist around the world. Additionally, the average of particle phase percentage was 30% because of nearby combustion sources. The determination of possible sources of PAHs in the regions was performed using principal component analysis (PCA). PCA results showed that the main sources of pollutants of the regions are intertwined (combustion, traffic, industries). However, the most effective source is thought to be uncontrolled combustion of furniture wastes as fuel for residential heating. Health risks for the citizens were calculated for both regions and were found not to be at high-class risk.

Accumulation of halogenated polycyclic aromatic hydrocarbons by different tuna species, determined by high-resolution gas chromatography Orbitrap mass spectrometry

Halogenated polycyclic aromatic hydrocarbon (HPAH) concentrations in tissues from three tuna species Thunnus albacares (yellowfin tuna), Katsuwonus pelamis (skipjack tuna), and Auxis thazard (frigate tuna) were determined by high-resolution gas chromatography Orbitrap mass spectrometry. The tuna samples were collected from the Indian Ocean. The instrument conditions gave high mass accuracy at 0.9 m/z isolation width of the mass filter and a mass error of <±1.0 ppm for many HPAHs. A total of 29 of the 30 targets chlorinated PAHs (ClPAHs) and 20 of the 21 targets brominated PAHs (BrPAHs) were detected in the tuna muscle samples. The mean total ClPAH, BrPAH and PAH concentrations for tuna were 127.2, 156.6 and 682.8 ng/g lipid weight, respectively. The mean total ClPAH and BrPAH concentrations (ng/g lipid weight) in the tuna were considerably lower than that of PAH concentrations. The mean total ClPAH, BrPAH and PAH concentrations in T. albacares respectively were 185.8, 249.2 and 784.1 ng/g lipid weight, irrespective of the body sizes. The mean total ClPAH, BrPAH and PAH concentrations in K. pelamis respectively were 45.1, 24.8 and 555.6 ng/g lipid weight. The mean total ClPAH, BrPAH and PAH concentrations in A. thazard respectively were 34.09, 4.73 and 433.24 ng/g lipid weight. The total ClPAH concentrations and body weights significantly positively correlated for T. albacares. The mean total ClPAH concentration in white muscles was significantly higher (p < 0.05) for large than for small T. albacares. This suggests ClPAHs could bioaccumulate in T. albacares, possibly because they are poorly metabolized. The chlorinated phenanthrene and pyrene concentrations indicated tuna accumulate these compounds increasingly effectively as the tuna grow. This was the first time large numbers of HPAHs were found in biological samples. HPAHs may adversely affect the health of humans consuming tuna.

Characterization and quantification of PM2.5 emissions and PAHs concentration in PM2.5 from the exhausts of diesel vehicles with various accumulated mileages

Road traffic is one of the main sources of particulate matter in the atmospheric environment. Notwithstanding its significance, there are noteworthy challenges in quantitative assessment of its contribution to the concentrations of airborne. This study reports on the characterization and quantification of PM_2.5 emissions and PAHs concentration in PM_2.5 from the exhausts of on-road diesel vehicles with various accumulated mileages in Kaohsiung City, Taiwan. Urban areas could be a subject matter not just in connection to deprived air quality, but similarly to pollution of other significant environmental media by air contaminants. To that end, our study intends to estimate the PM_2.5 emissions from diesel vehicles using diesel fuels and to analyze the PM_2.5 emissions and PAHs concentration in PM_2.5. In this study, particulate matters (PM_2.5) were characterized and quantified from a place impacted by diesel vehicles fueled with diesel in Kaohsiung City, Taiwan. The tested diesel vehicles with various accumulated mileages overs the model year comprising of the vehicles registered from 1984 to 2012 from different manufacturers (or brands) ranging from 8733 to 965,026 km (average 445,433 km) accumulative mileages. Exhaust constituents include CO, NOx, PM_2.5 and particle phase PAHs. The concentrations of twenty-one (21) priority polycyclic aromatic hydrocarbons (PAHs) were studied in the samples by their relationship with atmospheric PM_2.5. However, in relations to cumulative mileages, lower cumulative mileage (mileage <20,000 km) has the lowest CO and NOx emission factors. The mileage ranged from 20,001 to 30,000 km had an increased CO and NOx emission factors, respectively. Interestingly, with the increased high number of mileages ranged from 30,001 to 50,000 km, CO and NOx emission factor was observed to be declining, respectively. This could be attributed to the technological changes on new diesel vehicle models. But nonetheless, the trend of CO emission factor was found to be higher with an increasing of cumulative mileages as compared to the mileage that reached lower than 30,000 km.