Development of microbial community within the cathodic biofilm of single-chamber air-cathode microbial fuel cell

Bifunctional electrode materials: Enhancing microbial fuel cell efficiency with 3D hierarchical porous Fe3O4/Fe-N-C structures

The rational development of high-performance anode and cathode electrodes for microbial fuel cells (MFCs) is crucial for enhancing MFC performance. However, complex synthesis methods and single-performance electrode materials hinder their large-scale implementation. Here, three-dimensional hierarchical porous (3DHP) Fe3O4/Fe-N-C composites were prepared via the hard template method. Notably, Fe3O4/Fe-N-C-0.04-600 demonstrated uniformly dispersed Fe3O4 nanoparticles and abundant Fe-Nx and pyridinic nitrogen, showing excellent catalytic performance for oxygen reduction reaction (ORR) with a half-wave potential (E1/2) of 0.74 V (vs. RHE), surpassing Pt/C (0.66 V vs. RHE). Moreover, Fe3O4/Fe-N-C-0.04-600 demonstrated favorable biocompatibility as an anode material, enhancing anode biomass and extracellular electron transfer efficiency. Sequencing results confirmed its promotion of electrophilic microorganisms in the anode biofilm. MFCs employing Fe3O4/Fe-N-C-0.04-600 as both anode and cathode materials achieved a maximum power density of 831.8 ± 27.7 mW m-2, enduring operation for 38 days. This study presents a novel approach for rational MFC design, emphasizing bifunctional materials capable of serving as anode materials for microorganism growth and as cathode catalysts for ORR catalysis.

High-performance bacterium-enhanced dual-compartment microbial fuel cells for simultaneous treatment of food waste oil and copper-containing wastewater

Microbial fuel cells (MFCs) use the metabolic actions of microorganisms in an anode chamber to convert the chemical energy from wastewater into electrical energy. To improve the MFC power generation performance and chemical oxygen demand (COD) removal efficiency, Stenotrophomonas acidaminiphila was added to the anode chamber of a dual-compartment MFC. In this process, Stenotrophomonas acidaminiphila promotes the degradation of macromolecules such as bis(2-ethylhexyl) phthalate in food waste oil. Additionally, the generated electrical energy reduced Cu2+ in the copper-containing wastewater in the cathode chamber to Cu monomers. The maximum power density of the MFC was 49.5 ± 3.5 mW/m2, the maximum removal efficiencies of COD and Cu2+ were 63.5 ± 5.8% and 96.5 ± 1.0%, respectively, and Cu2+ was reduced to brick-red Cu monomers. This study provides insights into the simultaneous implementation of food waste oil treatment and metal resource recovery.

Filamentous marine Gram-positive Nocardiopsis dassonvillei biofilm as biocathode and its electron transfer mechanism

This study investigated electrochemical characteristics of Gram-positive, Nocardiopsis dassonvillei B17 facultative bacterium in bioelectrochemical systems. The results demonstrated that anodic and cathodic reaction rates were catalyzed by this bacterium, especially by utilization of aluminium alloy as a substrate. Cyclic voltammogram results depicted an increase of peak current and surface area through biofilm development, confirming its importance on catalysis of redox reactions. Phenazine derivatives were detected and their electron mediating behavior was evaluated exogenously. A symmetrical redox peak in the range of -59 to -159 mV/SHE was observed in cyclic voltammogram of bacterial solution supplemented with 12 μM phenazine, a result consistent with cyclic voltammogram of a 5-d biofilm, confirming its importance as an electron mediator in extracellular electron transfer. Furthermore, the dependency of bacterial catalysis and polarization potential were studied. These results suggested that B17 biofilm behaved as a biocathode and transferred electrons to bacterial cells through a mechanism associated with electron mediators.

Sustainable in situ ammonia recovery from municipal solid waste leachate in a single-stream microbial desalination cell

Municipal solid waste (MSW) leachate is one of the most hazardous waste streams leading to great potential risk to environment, and a renewable resource with high concentrations of organic contaminant and ammonia. High energy consumption and chemical input are still the challenges for ammonia recovery from MSW leachate. Here, a single-stream microbial desalination cell (SMDC) was successfully developed for simultaneous energy extraction from organic contaminant and in-situ energy utilization for ammonia recovery. 70% of the organic contaminant from the actual MSW leachate was removed, and 24.9% of the total ammonia was recovered as high-purity (NH4)2SO4. The additional desalination chamber introduced into the SMDC can potentially enhance the NH4+ migration that was determined by the NH4+ concentration gradient and electric field. More than 30% of the total nitrogen was lost, as revealed by nitrogen mass balance analysis, probably resulting from the anodic denitrification process driven by denitrifying microorganisms, e.g., Thauera, which thrived in the anode chamber. Concomitantly, the chemical input for ammonia stripping can be reduced by up to 68% due to the relatively low buffer capacity of the catholyte and the OH- production from the cathode reaction. This SMDC can be an effective and environmentally sustainable solution for MSW leachate treatment and resource recovery.

Salinity determines performance, functional populations, and microbial ecology in consortia attenuating organohalide pollutants

Organohalide pollutants are prevalent in coastal regions due to extensive intervention by anthropogenic activities, threatening public health and ecosystems. Gradients in salinity are a natural feature of coasts, but their impacts on the environmental fate of organohalides and the underlying microbial communities remain poorly understood. Here we report the effects of salinity on microbial reductive dechlorination of tetrachloroethene (PCE) and polychlorinated biphenyls (PCBs) in consortia derived from distinct environments (freshwater and marine sediments). Marine-derived microcosms exhibited higher halotolerance during PCE and PCB dechlorination, and a halotolerant dechlorinating culture was enriched from these microcosms. The organohalide-respiring bacteria (OHRB) responsible for PCE and PCB dechlorination in marine microcosms shifted from Dehalococcoides to Dehalobium when salinity increased. Broadly, lower microbial diversity, simpler co-occurrence networks, and more deterministic microbial community assemblages were observed under higher salinity. Separately, we observed that inhibition of dechlorination by high salinity could be attributed to suppressed viability of Dehalococcoides rather than reduced provision of substrates by syntrophic microorganisms. Additionally, the high activity of PCE dechlorinating reductive dehalogenases (RDases) in in vitro tests under high salinity suggests that high salinity likely disrupted cellular components other than RDases in Dehalococcoides. Genomic analyses indicated that the capability of Dehalobium to perform dehalogenation under high salinity was likely owing to the presence of genes associated with halotolerance in its genomes. Collectively, these mechanistic and ecological insights contribute to understanding the fate and bioremediation of organohalide pollutants in environments with changing salinity.

Advancements on sustainable microbial fuel cells and their future prospects: A review

A microbial fuel cell (MFC) is a sustainable device that produces electricity. The main components of MFC are electrodes (anode & cathode) and separators. The MFC's performance is ascertained by measuring its power density. Its components and other parameters, such as cell design and configuration, operation parameters (pH, salinity, and temperature), substrate characteristics, and microbes present in the substrate, all influence its performance. MFC can be scaled up and commercialized using low-cost materials without affecting its performance. Hence the choice of materials plays a significant role. In the past, precious and non-precious metals were mostly used. These were replaced by a variety of low-cost carbonaceous and non-carbonaceous materials. Nano materials, activated compounds, composite materials, have also found their way as components of MFC materials. This review describes the recently reported modified electrodes (anode and cathode), their improvisation, their merits, pollutant removal efficiency, and associated power density.

Enhanced sulfur recovery and sulfate reduction using single-chamber bioelectrochemical system

The aim of this study was to investigate the feasibility of sulfate removal and elemental sulfur (S⁰) recovery in the single-chamber bioelectrochemical system (S-BES). The performance of S-BES was compared with that of dual-chamber bioelectrochemical system (D-BES). The S-BES was constructed with graphite felt as the anode and graphite brush as the cathode. The D-BES was constructed with proton exchange membrane as the separator between anode and cathode chambers. With an applied voltage of 1.0 V and 1 g/L acetate as the substrate, the S-BES and D-BES were tested by feeding with 480 mg/L SO₄^2- in the phosphate buffer. Results showed that the maximum current density of 37.6 ± 4.5 mA/m³ was reached in the S-BES, which was higher than that in the D-BES (i.e., 22.2 ± 2.6 mA/m³). The SO₄^2- removal was much higher in the S-BES than in the D-BES (99.5% vs. 57.2%). In the effluent and the electrodes of S-BES, S⁰ was identified with Raman and X- Ray diffraction analyses. The S⁰ recovery on the anode was 13.7 times of that on the cathode of S-BES, indicating that S⁰ was mainly produced on the anode. The measured total S⁰ recovery reached 67.5% in the S-BES. High relative abundance of Desulfurella (47.1%) and Geobacter (26.1%) dominated the community in the anode biofilm of S-BES. The excellent performance of S-BES may be attributed to the neutral pH in the solution and the synergistic reaction between the anode and cathode. Results from this study should be useful to enhance the S-BES applications in treating wastewater containing sulfate.

Investigation of the optimum conditions for electricity generation by haloalkaliphilic archaeon Natrialba sp. GHMN55 using the Plackett-Burman design: single and stacked MFCs

The production of bioelectricity via the anaerobic oxidation of organic matter by microorganisms is recently receiving much interest and is considered one of the future alternative technologies. In this study, we aimed to produce electrical current by using facultative halophilic archaeon Natrialba sp. GHMN55 as a biocatalyst at the anode of a microbial fuel cell (MFC) to generate electrons from the anaerobic breakdown of organic matter to produce electrical current. Since the MFC’s performance can be affected by many factors, the Plackett–Burman experimental design was applied to optimize the interaction between these factors when tested together and to identify the most significant factors that influence bioelectricity generation. We found that the factors that significantly affected electrical current generation were casein, inoculum age, magnet-bounded electrodes, NaCl, resistor value, and inoculum size; however, the existence of a mediator and the pH showed negative effects on bioelectricity production, where the maximum value of the 200 mV voltage was achieved after 48 h. The optimum medium formulation obtained using this design led to a decrease in the time required to produce bioelectricity from 20 days (in the basal medium) to 2 days (in the optimized medium). Also, the overall behavior of the cell could be enhanced by using multiple stacked MFCs with different electrical configurations (such as series or parallel chambers) to obtain higher voltages or power densities than the single chambers where the series chambers were recorded at 27.5 mV after 48 h of incubation compared with 12.6 mV and 1.1 mV for parallel and single chambers, respectively. These results indicate that the order of preferred MFC designs regarding total power densities would be series > parallel > single.

Enhanced electricity generation and tetracycline removal of bioelectro-Fenton with electroactive biofilm induced by multi external resistance

A simple multi electric resistance mode is used to regulate electroactive anode film, which improves the electricity generation, H₂O₂ production and pollutants removal. This external electron transport path (double cathode with different resistance) exhibits higher H₂O₂ production (571.9 ± 0.1 mg m^-2 h^-1), tetracycline removal (71.4 ± 0.4% to 50 mg L^-1), and power (615.3 ± 9.9 mW m^-2 plus 680.6 ± 10.3 mW m^-2), which is 75.4%, 23.1% and 1.25 times higher than that of single cathode mode. The double cathode improves the relative abundance of Geobacter (exoelectrogens), which is 9.45 times higher than that of single cathode mode. The anodic capacitance of double cathode mode is more than 10 times higher than that of single cathode mode. Electrons (generate by exoelectrogens) participate in two- (cathodic chamber) and four- (anodic chamber) electron reaction at cathode surface, and facilitates electricity generation of bioelectro-Fenton. The removal rate of double cathode mode is 342.7 mg L^-1 d^-1 (50 mg L^-1 tetracycline) and 170.1 mg L^-1 d^-1 (20 mg L^-1 tetracycline), which is much higher than that of reported. These results indicate that external electron transport path enhances the electrochemical activity of anode film and performance of bioelectro-Fenton. This paper provides a new power supply method for the future practical application and field experiment of bioelectrio-Fenton.

Degradation of pyrene using single-chamber air-cathode microbial fuel cells: Electrochemical parameters and bacterial community changes

Pyrene, a typical four-ring polycyclic aromatic hydrocarbon, is abundantly present in the environment and is potentially harmful to the human body. In this study, single-chamber air-cathode microbial fuel cells (MFCs) were used to treat pyrene, and the ensuing degradation, electrical parameters, and microbial changes were analyzed. The results showed that MFCs could degrade pyrene, and the maximum degradation rate for 30 mg/L reached 88.1 ± 5.4%. The addition of pyrene reduced the electrical performance of the MFCs and suppressed the power output. Analysis of the anodic microbial community showed that the proportion of Alcaligenes and Stenotrophomonas increased with an increase in pyrene concentration, which may explain the high degradation rate of pyrene.

The potential of electrotrophic denitrification coupled with sulfur recycle in MFC and its responses to COD/SO42- ratios

Electrotrophic denitrification is a promising novel nitrogen removal technique. In this study, the performance and the mechanism of electrotrophic denitrification coupled with sulfate-sulfide cycle were investigated under different anodic influent COD/SO₄^2- ratios. The results showed that electrotrophic denitrification contributed to more than 22% total nitrogen removal in cathode chamber. Higher COD/SO₄^2- ratios would deteriorate the sulfate reduction but enhance methane production. Further mass balance indicated that the electron flow utilized by methanogenic archaea (MA) increased while that utilized by sulfate-reducing bacteria (SRB) decreased as the COD/SO₄^2- ratio increased from 0.44 to 1.11. However, higher COD/SO₄^2- ratios would produce more electrons to strengthen electrotrophic denitrification. Microbial community analysis showed that the biocathode was predominantly covered by Thiobacillus that encoded with narG gene. These findings collectively suggest that electrotrophic denitrification could be a sustainable approach to simultaneously remove COD and nitrogen under suitable COD/SO₄^2- ratio based on sulfur cycle in wastewater.

Green approach and strategies for wastewater treatment using bioelectrochemical systems: A critical review of fundamental concepts, applications, mechanism, and future trends

Millions of litters of multifarious wastewater are directly disposed into the environment annually to reduce the processing costs leading to eutrophication and destroying the clean water sources. The bioelectrochemical systems (BESs) have recently received significant attention from researchers due to their ability to convert waste into energy and their high efficiency of wastewater treatment. However, most of the performed researches of the BESs have focused on energy generation, which created a literature gap on the utilization of BESs for wastewater treatment. The review highlights this gap from various aspects, including the BESs trends, fundamentals, applications, and mechanisms. A different review approach has followed in the present work using a bibliometric review (BR) which defined the literature gap of BESs publications in the degradation process section and linked the systematic review (SR) with it to prove and review the finding systematically. The degradation mechanisms of the BESs have been illustrated comprehensively in the current work, and various suggestions have been provided for supporting future studies and cooperation.

Anodic and cathodic biofilms coupled with electricity generation in single-chamber microbial fuel cell using activated sludge

Microbial fuel cell (MFC) is used to remove organic pollutants while generating electricity. Biocathode plays as an efficient electrocatalyst for accelerating the Oxidation Reduction Reaction (ORR) of oxygen in MFC. This study integrated biocathode into a single-chamber microbial fuel cell (BSCMFC) to produce electricity from an organic substrate using aerobic activated sludge to gain more insights into anodic and cathodic biofilms. The maximum power density, current density, chemical oxygen demand (COD) removal, and coulombic efficiency were 0.593 W m^-3, 2.6 A m^-3, 83 ± 8.4%, and 22 ± 2.5%, respectively. Extracellular polymeric substances (EPS) produced by biofilm from the biocathode were higher than the bioanode. Infrared spectroscopy and Scanning Electron Microscope (SEM) examined confirmed the presence of biofilm by the adhesion on electrodes. The dominant phyla in bioanode were Proteobacteria, Firmicutes, Bacteroidetes, and Actinobacteria, while the dominant phylum in the biocathode was Proteobacteria. Therefore, this study demonstrates the applicable use of BSCMFC for bioelectricity generation and pollution control.

Hydrogen production in single-chamber microbial electrolysis cell under high applied voltages

The aim of this study was to investigate the performance of single-chamber MEC under applied voltages higher than that for water electrolysis. With different acetate concentrations (1.0-2.0 g/L), the MEC was tested under applied voltages from 0.8 to 2.2 V within 2600 h (54 cycles). Results showed that the MEC was stably operated for the first time within 20 cycles under 2.0 and 2.2 V, compared with the control MEC with significant water electrolysis. The maximum current density reached 27.8 ± 1.4 A/m² under 2.0 V, which was about three times as that under 0.8 V. The anode potential in the MEC could be kept at 0.832 ± 0.110 V (vs. Ag/AgCl) under 2.2 V, thus without water electrolysis in the MEC. High applied voltage of 1.6 V combined with alkaline solution (pH = 11.2) could result in high hydrogen production and high current density. The maximum current density of MEC at 1.6 V and pH = 11.2 reached 42.0 ± 10.0 A/m², which was 1.85 times as that at 1.6 V and pH = 7.0. The average hydrogen content reached 97.2% of the total biogas throughout all the cycles, indicating that the methanogenesis was successfully inhibited in the MEC at 1.6 V and pH = 11.2. With high hydrogen production rate and current density, the size and investment of MEC could be significantly reduced under high applied voltages. Our results should be useful for extending the range of applied voltages in the MEC.

Electrochemical performance and response of bacterial community during phenanthrene degradation in single-chamber air-cathode microbial fuel cells

Polycyclic aromatic hydrocarbons have attracted considerable attention for their carcinogenic, teratogenic, and mutagenic properties in humans. Phenanthrene is one of the most abundant polycyclic aromatic hydrocarbons in aquatic environments. In this study, different concentrations of phenanthrene were degraded by single-chamber air-cathode microbial fuel cells. The electrochemical parameter of microbial fuel cells and biofilm changes on the anode were observed. The results showed that the addition of phenanthrene reduced the power output of the microbial fuel cell which affected the process of microbial electricity generation. Meanwhile, microorganisms destroyed the original structure of phenanthrene through anaerobic metabolism, and achieved good average degradation of 94.9-98.4%. Observation of the anodic biofilm found that the microbes had tolerance to phenanthrene and the biofilm exhibited to be well-constructed. Bacterial community distribution showed a decrease in the relative abundance of Acidovorax and Aquamicrobium, whereas the relative content of the main electroactive organism, Geobacter, increased by a factor of three. The results show that it is feasible for microbial fuel cells to biodegrade phenanthrene, and provide some references for the changes of microbial community during degradation process.

Development of an electroactive aerobic biocathode for microbial fuel cell applications

Microbial biocathodes are gaining interest due to their low cost, environmental friendliness and sustainable nature. In this study, a microbial consortium was enriched from activated sludge obtained from a common textile effluent treatment plant in the absence of organic carbon source to produce an electroactive biofilm. Chronoamperometry method of enrichment was carried out for over 70 days to select for electroactive bacteria that could be used as a cathode catalyst in microbial fuel cells (MFC). The resultant biofilm produced an average peak current of -0.7 mA during the enrichment and produced a maximum power density of 64.6 ± 3.5 mW m^-2 compared to platinum (72.7 ± 1.2 mW m^-2 ) in a Shewanella-based MFC. Microbial community analysis of the initial sludge sample and enriched samples, based on 16S rRNA gene sequencing, revealed the selection of chemolithotrophs with the most dominant phylum being Bacteroidetes, Proteobacteria, Firmicutes, Actinobacteria and Acidobacteria in the enriched samples. A variety of CO₂ fixing and nitrate-reducing bacteria was present in the resultant biofilm on the cathode. This study suggests that microbial consortia are capable of replacing expensive platinum as a cathode catalyst in MFCs.

Electricity Generation, Salt and Nitrogen Removal and Microbial Community in Aircathode Microbial Desalination Cell for Saline-Alkaline Soil-Washing Water Treatment

An aircathode microbial desalination cell (AMDC) was successfully started by inoculating anaerobic sludge into the anode of a microbial desalination cell and then used to study the effects of salinity on performance of AMDC and effect of treatment of coastal saline-alkaline soil-washing water. The results showed that the desalination cycle and rate gradually shorten, but salt removal gradually increased when the salinity was decreased, and the highest salt removal was 98.00 ± 0.12% at a salinity of 5 g/L. COD removal efficiency was increased with the extension of operation cycle and largest removal efficiency difference was not significant, but the average coulomb efficiency had significant differences under the condition of each salinity. This indicates that salinity conditions have significant influence on salt removal and coulomb efficiency under the combined action of osmotic pressure, electric field action, running time and microbial activity, etc. On the contrary, COD removal effect has no significant differences under the condition of inoculation of the same substrate in the anode chamber. The salt removal reached 99.13 ± 2.1% when the AMDC experiment ended under the condition of washing water of coastal saline-alkaline soil was inserted in the desalination chamber. Under the action of osmotic pressure, ion migration, nitrification and denitrification, NH4+-N and NO3−-N in the washing water of the desalination chamber were removed, and this indicates that the microbial desalination cell can be used to treatment the washing water of coastal saline-alkaline soil. The microbial community and function of the anode electrode biofilm and desalination chamber were analyzed through high-throughput sequencing, and the power generation characteristics, organics degradation and migration and transformation pathways of nitrogen of the aircathode microbial desalination cell were further explained.

Comparison of Carbon Dioxide with Anaerobic Digester Biogas as a Methanogenic Biocathode Feedstock

BES biogas upgrading studies have typically used bicarbonate or commercial gas mixtures as a biocathode substrate instead of anaerobic digester biogas. Therefore, the objective of this study was to (i) compare the performance of a methanogenic BES between CO₂-fed and biogas-fed cycles; (ii) investigate possible factors that may account for observed performance differences; and (iii) assess the performance of a biogas-fed biocathode at various applied cathode potentials. The maximum 1-d CH₄ production rate in a biogas-fed biocathode (3003 mmol/m²-d) was 350% higher than in a CO₂-fed biocathode (666 mmol/m²-d), and the biogas-fed biocathode was capable of maintaining high performance despite a variable biogas feed composition. Anode oxidation of reduced gases (e.g., CH₄ and H₂S) from biogas may theoretically contribute 4% to 35% of the total charge transfer from anode to cathode at applied cathode potentials of -0.80 to -0.55 V (vs SHE). The introduction of biogas did not significantly change the biocathode archaeal community (dominated by a Methanobrevibacter sp. phylotype), but the bacterial community shifted away from Bacteroidetes and toward Proteobacteria, which may have contributed to the improved performance of the biogas-fed system. This study shows that anaerobic digester biogas is a promising biocathode feedstock for BES biogas upgrading.

Photocathode optimization and microbial community in the solar-illuminated bio-photoelectrochemical system for nitrofurazone degradation

To further enhance the bio-photoelectrochemical system (BPES) performance for nitrofurazone (NFZ) degradation and current output, the g-C₃N₄/CdS photocathode was optimized, and microbial community shift from inoculation to the BPES was analyzed. Results showed that photocathode with g-C₃N₄/CdS (mass ratio of 1:9) loading of 7.5 mg/cm² exhibited the best performance, with NFZ removal of 83.14% (within 4 h) and current of ~9 mA in the BPES. Proteobacteria accounted for the largest proportion: 66.53% (inoculation), 71.89% (microbial electrolysis cell (MEC) anode), 74.67% (BPES anode) and 57.31% (BPES cathode), respectively. In addition, Geobacter was the most dominant genus in MEC and BPES anode and cathode, which occupied 31.64%, 67.73% and 41.34%, respectively. The microbial compositions of BPES anode and cathode were similar, but different from that of MEC anode. Notably, Rhodopseudomonas, a photosynthetic species, was detected in the BPES. Cognition of microbial community in the BPES is important for advancing its development.

Increasing of electricity production from Echinodosus cordifolius-microbial fuel cell by inoculating Bacillus thuringiensis

The wetland-microbial fuel cell (MFC) is a novel electricity generating technology. However, these systems can generate only limited electric energy. Since nitrification is a key mechanism driving electrical power in wetland-MFC systems, an effective nitrifying bacteria, Bacillus thuringiensis, was used to inoculate a wetland-MFC to enhance the maximum power density of the system. B. thuringiensis effectively enhanced the maximum power density, producing about 20-35 mW m^-2 of maximum power density. Interestingly, over the first 120 days of operation, the wetland-MFC system with only B. thuringiensis generated more power than a system containing an Echinodosus cordifolius plant in addition to B. thuringiensis, because E. cordifolius can took up nitrate (NO₃^-) and phosphate (PO₄^3-) in system's solution. Nitrate and PO₄^3- act as important anions driving electric current in the system. After 120 days of operation though, the combined E. cordifolius and B. thuringiensis system maintained 20-35 mW m^-2 maximum power density and the maximum power density of the system only inoculated with B. thuringiensis decreased continuously. Gene (16S rRNA) copy numbers for B. thuringiensis showed that when E. cordifolius was presented, the bacterium was able to continue growing after 120 days of operation. B. thuringiensis did not grow as well after 120 days in the system that did not contain a plant. This study presents a strategy for enhancing electric power output from a wetland-MFC by inoculating the system with B. thuringiensis and maintaining the bacterium's population with the support of an E. cordifolius plant. The result clearly show that B. thuringiensis can enhance electric power generation in the presence of the plant and the system can self-sustain for longer than 180 days of operation while producing 20-35 mW m^-2 maximum power density.