Sustainable valorization of mesoporous aluminosilicate composite from display panel glasses waste for adsorption of heavy metal ions

Removal of Zn2+ from Aqueous Solution Using Biomass Ash and Its Modified Product as Biosorbent

To study the removal effect of bottom ash of biomass power plants and its modified products on zinc (Zn²⁺) in aqueous solution, a series of indoor experiments is carried out. The aim of this work is to explore a method to improve the ability of biomass ash to remove Zn²⁺ from aqueous solution and obtain its adsorption characteristics of Zn²⁺ in aqueous solution; on this basis, the feasibility of its application in the treatment of Zn²⁺-contaminated wastewater is analyzed. The mesoporous siliceous material is used to modify the biomass, and the modified material is functionalized with 3-aminopropyltriethoxysilane. The results show that the specific surface area of modified biomass ash is nine times that of the material before modification. The adsorption capacity of Zn²⁺ on the material increases with the increase of pH, and pH 6 is the optimum pH to remove Zn²⁺ from the aqueous solution. The Langmuir model and Freundlich model can show better fits for biomass ash and the modified material, respectively. Thermodynamic analysis results show that the adsorption of Zn²⁺ is spontaneous and endothermic in nature. The adsorption of Zn²⁺ onto biomass and modified biomass ash follow pseudo-first-order and pseudo-second-order kinetics, respectively.

Recent advances in waste-derived functional materials for wastewater remediation

Water pollution is a major concern for public health and a sustainable future. It is urgent to purify wastewater with effective methods to ensure a clean water supply. Most wastewater remediation techniques rely heavily on functional materials, and cost-effective materials are thus highly favorable. Of great environmental and economic significance, developing waste-derived materials for wastewater remediation has undergone explosive growth recently. Herein, the applications of waste (e.g., biowastes, electronic wastes, and industrial wastes)-derived materials for wastewater purification are comprehensively reviewed. Sophisticated strategies for turning wastes into functional materials are firstly summarized, including pyrolysis and combustion, hydrothermal synthesis, sol-gel method, co-precipitation, and ball milling. Moreover, critical experimental parameters within different design strategies are discussed. Afterward, recent applications of waste-derived functional materials in adsorption, photocatalytic degradation, electrochemical treatment, and advanced oxidation processes (AOPs) are analyzed. We mainly focus on the development of efficient functional materials via regulating the internal and external characteristics of waste-derived materials, and the material's property-performance correlation is also emphasized. Finally, the key future perspectives in the field of waste-derived materials-driven water remediation are highlighted.

Up-Cycling of LCD Glass by Additive Manufacturing of Porous Translucent Glass Scaffolds

Additive manufacturing technologies, compared to conventional shaping methods, offer great opportunities in design versatility, for the manufacturing of highly porous ceramic components. However, the application to glass powders, later subjected to viscous flow sintering, involves significant challenges, especially in shape retention and in the achievement of a substantial degree of translucency in the final products. The present paper disclosed the potential of glass recovered from liquid crystal displays (LCD) for the manufacturing of highly porous scaffolds by direct ink writing and masked stereolithography of fine powders mixed with suitable organic additives, and sintered at 950 °C, for 1-1.5 h, in air. The specific glass, featuring a relatively high transition temperature (T_g~700 °C), allowed for the complete burn-out of organics before viscous flow sintering could take place; in addition, translucency was favored by the successful removal of porosity in the struts and by the resistance of the used glass to crystallization.

Transformation of Glass Fiber Waste into Mesoporous Zeolite-Like Nanomaterials with Efficient Adsorption of Methylene Blue

Recycling and reusing glass fiber waste (GFW) has become an environmental concern, as the means of disposal are becoming limited as GFW production increases. Therefore, this study developed a novel, cost-effective method to turn GFW into a mesoporous zeolite-like nanomaterial (MZN) that could serve as an environmentally benign adsorbent and efficient remover of methylene blue (MB) from solutions. Using the Taguchi optimizing approach to hydrothermal alkaline activation, we produced analcime with interconnected nanopores of about 11.7 nm. This MZN had a surface area of 166 m2 g−1 and was negatively charged with functional groups that could adsorb MB ranging from pH 2 to 10 and all with excellent capacity at pH 6.0 of the maximum Langmuir adsorption capacity of 132 mg g−1. Moreover, the MZN adsorbed MB exothermically, and the reaction is reversible according to its thermodynamic parameters. In sum, this study indicated that MZN recycled from glass fiber waste is a novel, environmentally friendly means to adsorb cation methylene blue (MB), thus opening a gateway to the design and fabrication of ceramic-zeolite and tourmaline-ceramic balls and ceramic ring-filter media products. In addition, it has environmental applications such as removing cation dyes and trace metal ions from aqueous solutions and recycling water.

Adsorption of Hg(II) in an Aqueous Solution by Activated Carbon Prepared from Rice Husk Using KOH Activation

With the development of industry, the discharge of wastewater containing mercury ions posed a serious threat to human health. Using biomass waste as an adsorbent to treat wastewater containing mercury ions was a better way due to its positive impacts on the environment and resource saving. In this research, activated carbon (AC) was prepared from rice husk (RH) by the KOH chemical activation method. The characterization results of scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), Fourier transform infrared (FTIR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) showed that rice husk-activated carbon (RHAC) had good pore structure and oxygen-containing functional groups. The influences of contact time, initial concentration of Hg(II), adsorbent dosage, pH, and ionic strength on mercury ion removal were investigated. The Langmuir model was most suitable for the adsorption isotherm of RHAC, and its maximum adsorption capacity for Hg(II) was 55.87 mg/g. RHAC still had a high removal capacity for Hg(II) after five regeneration cycles. RHAC had excellent removal efficiency for mercury ion wastewater. At the same time, RH could be used as a nonpolluting and outstanding characteristic adsorbent material.

Photocatalytic degradation of paracetamol using aluminosilicate supported TiO2

The continuous growth of the pharmaceutical drug industry has escalated the problem of pharmaceutical waste disposal, and subsequent contamination of aquatic bodies. Paracetamol is one of the most prescribed and purchased drugs that has been widely detected in wastewater and surface water. The present study investigated paracetamol degradation by photocatalytic treatment in a batch system using TiO₂ supported on aluminosilicate recovered from waste LED panel (ATiO₂). The prepared ATiO₂ catalyst was characterized for morphology, elemental composition and crystallinity using scanning electron microscope (SEM) with electron dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD), respectively. ATiO₂ was spherical in morphology with a predominance of the anatase phase of TiO₂ and an average size of ∼15 nm. Subsequently, the effects of operating parameters, viz., initial paracetamol concentration (1-10 mg/L), catalyst dosage (0.5-4.0 g/L) and pH (4-10) on paracetamol degradation were investigated using central composite design (CCD). A polynomial model was developed to interpret the linear and interactive effect of operating parameters on the paracetamol degradation efficiency. About 99% degradation efficiency of paracetamol was obtained at optimum conditions (Initial paracetamol concentration ∼2.74 mg/L, ATiO₂ dosage ∼2.71 g/L and pH ∼ 9.5). The mechanism of paracetamol degradation was adsorption on aluminosilicate and subsequent degradation by TiO₂. ATiO₂ could be effectively reused up to 3 cycles, with <5% decrease in the degradation efficiency.

Sorption and mechanism studies of Cu2+, Sr2+ and Pb2+ ions on mesoporous aluminosilicates/zeolite composite sorbents

The research aimed to develop a novel mesoporous aluminosilicate/zeolite composite by the template co-precipitation method. The effect of aluminosilicate (AlSi) and zeolite (NaY) on the basic properties and adsorption capacity of the resultant composite was conducted at different mass ratios of AlSi/NaY (i.e., 5/90, 10/80, 15/85, 20/80, and 50/50). The adsorption characteristics of such composite and its feedstock materials (i.e., aluminosilicates and zeolite) towards radioactive Sr²⁺ ions and toxic metals (Cu²⁺ and Pb²⁺ ions) in aqueous solutions were investigated. Results indicated that BET surface area (S_BET), total pore volume (V_Total), and mesopore volume (V_Meso) of prepared materials followed the decreasing order: aluminosilicate (890 m²/g, 0.680 cm³/g, and 0.644 cm³/g) > zeolite (623 m²/g, 0.352 cm³/g, and 0.111 cm³/g) > AlSi/NaY (20/80) composite (370 m²/g, 0.254 cm³/g, and 0.154 cm³/g, respectively). The Langmuir maximum adsorption capacity (Q_m) of metal ions (Sr²⁺, Cu²⁺, and Pb²⁺) in single-component solution was 260 mg/g, 220 mg/g, and 161 mg/g (for zeolite), 153 mg/g, 37.9 mg/g, and 66.5 mg/g (for aluminosilicate), and 186 mg/g, 140 mg/g, and 77.8 mg/g for (AlSi/NaY (20/80) composite), respectively. Ion exchange was regarded as a domain adsorption mechanism of metal ions in solution by zeolite; meanwhile, inner-surface complexation was domain one for aluminosilicate. Ion exchange and inner-surface complexation might be mainly responsible for adsorbing metal ions onto the AlSi/NaY composite. Pore-filling mechanism was a less important contributor during the adsorption process. The results of competitive adsorption under binary-components (Cu²⁺ and Sr²⁺) and ternary-components (Cu²⁺, Pb²⁺, and Sr²) demonstrated that the removal efficacy of target metals by the aluminosilicate, zeolite, and their composite remarkably decreased. The synthesized AlSi/NaY composite might serve as a promising adsorbent for real water treatment.

Using Sewage Sludge Ash as an Efficient Adsorbent for Pb (II) and Cu (II) in Single and Binary Systems

Incineration of sewage sludge produces every year huge amounts of sewage sludge ash. Due to its porosity and composition, sewage sludge ash can be used as an adsorbent for heavy metal ions removal. The present paper discusses the efficiency and feasibility of its use as an adsorbent for Pb (II) and Cu (II) removal in single and binary systems. Sewage sludge ash dosage, pH influence, equilibrium and kinetic studies were examined. The results show that sewage sludge ash is an effective and environmentally friendly adsorbent. The maximum adsorption capacity was 25.0 mg/g for Pb (II) and 7.5 mg/g for Cu (II). The presence of the competitive metal led to lower adsorption rate. The study concludes that sewage sludge ash is a promising adsorbent for Pb (II) and Cu (II) removal from wastewater presenting both economic and environmental benefits.

An advanced sol-gel strategy for enhancing interfacial reactivity of iron oxide nanoparticles on rosin biochar substrate to remove Cr(VI)

The application of iron oxide nanoparticles (IONs) is often limited by agglomeration and low loading. Here, we presented a facile phase change material (PCM) -based sol-gel strategy for the fabrication of α-Fe₂O₃ nanoparticles. Rosin was used as the PCM in the sol-gel process and the carbon-based substrate of α-Fe₂O₃ nanoparticles in the thermal process. The α-Fe₂O₃ nanoparticle embedded rosin-derived biochar(α-Fe₂O₃@HrBc)were highly dispersed. The dispersity of α-Fe₂O₃ nanoparticle could be regulated by the weight ratios of rosin to FeCl₃·6H₂O during the preparation, as evidenced by the scanning electron microscope (SEM) spectrum and the sorption capacity results. Among a series of α-Fe₂O₃@HrBc nanocomposites, the one with the weight ratios of 1/1.5 rosin/FeCl₃·6H₂O had the highest capacity for hexavalent chromium (Cr(VI)) sorption. This phenomenon can be ascribed to a remarkably enhanced interfacial reactivity due to an increase in the dispersity of α-Fe₂O₃ nanoparticle. In addition, SEM showed that the majority of α-Fe₂O₃ nanoparticles was dispersed on and inside the biochar substrate. Batch adsorption experiments revealed that the α-Fe₂O₃@HrBc adsorbed 90% Cr(VI) within one minute, and the maximum capacity was up to 166 mg·g^-1 based on the Langmuir model. The FTIR and XPS spectra revealed that the adsorbed Cr(VI) species were partially reduced to less toxic Cr(III). Considering that α-Fe₂O₃ nanoparticles provided important sorption sites, the newly formed Cr(III) and the remaining Cr(VI) ions could be adsorbed on α-Fe₂O₃@HrBc via the formation of FeCr coprecipitation.

Simultaneous Recovery of Display Panel Waste Glass and Wastewater Boron by Chemical Oxo-precipitation with Fluidized-Bed Heterogeneous Crystallization

Silica-based carrier is a promising material for recovery of metal and nonmetal contaminants in chemical oxo-precipitation-fluidized bed crystallization (COP-FBC) system. Boron species are an essential element for plant growth and can cause health concerns in human beings at high concentrations in water environments. The composition of thin-film transistor liquid crystal display (TFT-LCD) contains a wide variety of metal oxides and can be tailored as promising functional mesoporous carriers for boron crystallization recovery in the presence of barium ions and hydrogen peroxide. In this study, waste-derived mesoporous aluminosilicate (MAS) nanomaterial in the presence of barium ions and hydrogen peroxide was used as a carrier for sustainable recovery of crystallized boron, a priority wastewaters pollutant. The MAS shows the hierarchically homogeneous distribution of nanostructured aluminosilicate particles with an average size of 12.8 ± 3.6 nm on the surface after the activation with Na₂CO₃ at 1000 °C. Moreover, the negatively charged surface and the mesoporous structure of MAS enhance the adsorption of Ba²⁺ onto MAS, and the Langmuir adsorption capacity of 105 mg/g is achieved, which is conducive to the enhancement of the recovery of boron species. Moreover, the recovery efficiency and crystallization ratio of boron by MAS can be up to 84.5 and 93.4%, respectively. The cross-sectional scanning electron microscopy images and the high-temperature X-ray diffraction results confirm the boron recovery mechanism that the negatively charged functional group as well as the mesoporosity of MAS triggers the rapid formation of needle-shaped precipitates of barium peroxoborate, and then converted to barium borate after calcination at 1050 °C. Results obtained in this study clearly demonstrate the possibility of fabricating environmentally benign mesoporous aluminosilicate adsorbents from TFT-LCD waste to sustainably recover and crystallize boron species from water and wastewater in COP-FBC.