Fluorescent enzyme-linked immunoassay based on silane-doped carbon dots for sensitive detection of microcystin-LR in water and crucian samples

Photoelectrochemical aptasensing with methylene blue filled Ni-MOFs nanocomposite by spatial confinement for microcystin-LR detection

Microcystin LR (MC-LR) is a hazardous cyanotoxin produced by cyanobacteria during freshwater eutrophication, which can cause liver cancer. Here, a photoelectrochemical (PEC) aptasensor based on methylene blue (MB)-loaded Ni-MOF composite (Ni-MOF/MB) with spatial confinement was constructed for the sensitive detection of MC-LR. Ni-MOF with two-dimensional sheet structure was prepared via a liquid-liquid interface synthesis method with environmental-friendly solvent and milder reaction conditions. Benefiting from the uniform pore size, Ni-MOF acted as reaction platform to anchor the photosensitive molecule MB. The electron donor, ascorbic acid (AA), was produced by alkaline phosphatase (ALP) loaded on DNA strand catalyzing ascorbic acid phosphate. The generated AA was absorbed by Ni-MOF/MB, thereby effectively improving the utilization of AA and avoiding the external environment interferences to enlarge the photocurrent of MB. For analysis, ALP-labeled aptamer can specifically recognize MC-LR by forming a complex to strip from aptasensor, thus leading to a  decreased photocurrent. The developed PEC aptasensor offered a linear range of 10 fM-100 pM with a detection limit of 6 fM. It was successfully employed for detecting MC-LR in farm water and fish meat, and the results were validated by ultrahigh-performance liquid chromatography-mass spectrometry. This method presents a new idea of MOF-limited domain for PEC aptasensing.

Detection of oxytetracycline in milk using a novel carbon dots-based fluorescence probe via facile pyrolysis synthesis

Amphiphilic blue-fluorescence carbon dots (B-CDs) were synthesized via pyrolysis method with citric acid and oleamine as precursors. B-CDs are monodispersed in ethanol, toluene, and ultrapure water with the average particle sizes of 3.33 nm, 2.05 nm, and 4.12 nm, respectively. The maximum emission wavelength of the B-CDs excitation at 370 nm is located at 459 nm. The B-CDs have good optical properties with excellent photostability. The fluorescence quantum yield (QY) of the as-prepared CDs is as high as 30.17%. The fluorescence of B-CDs is quenched because of static quenching by oxytetracycline. A high selective and sensitive fluorescence probe for detecting oxytetracycline was constructed with a linear range of 1.52-27.60 µg/mL and the detection limit of 0.33 µg/mL. The B-CDs-based fluorescence probe can be applied to analyze oxytetracycline in milk; the recoveries and relative standard are satisfactory. Furthermore, the B-CDs were exploited for imaging of SH-SY5Y cells. The results demonstrate that as-synthesized CDs can serve as a cellular imaging reagent owing to remarkable bioimaging performance. This work provides a new strategy for the detection of oxytetracycline in food.

Monoclonal Antibody-Based Colorimetric Lateral Flow Immunoassay for the Detection of Pyridaben in the Environment

Pyridaben, a broad-spectrum pyridazinone acaricide that is widely used in agricultural production, can induce neurotoxicity and reproductive abnormalities, and is highly toxic to aquatic organisms. In this study, a pyridaben hapten was synthesized and used to prepare monoclonal antibodies (mAbs), among which 6E3G8D7 showed the highest sensitivity in indirect competitive enzyme-linked immunosorbent assay, with a 50% inhibitory concentration (IC₅₀) of 3.49 ng mL^-1. The mAb, 6E3G8D7, was further applied to a gold nanoparticle-based colorimetric lateral flow immunoassay (CLFIA) for pyridaben detection, according to the signal intensity ratio of the test line to the control line, which showed a visual limit of detection of 5 ng mL^-1. The CLFIA also showed high specificity and achieved excellent accuracy in different matrices. In addition, the amounts of pyridaben in blind samples detected by the CLFIA, were consistent with high-performance liquid chromatography. Therefore, the developed CLFIA is considered a promising, reliable, and portable method for pyridaben on-site detection in agro-products and environmental samples.

Fluorescence Signal Amplification: Red Carbon Dots@SiO2-Induced Ultra-sensitive Immunoassay for Diethyl Phthalate

Carbon dots as new nanomaterials, have been widely used in rapid detection because of their nondestructive, real-time detection characteristics. Improving the sensitivity and selectivity of the method in complex real samples is new challenge and requirement for sensing technology. Here, we report an ultrasensitive fluorescence immunoassay (FIA) for trace diethyl phthalate (DEP) using red carbon dots@SiO₂ (R-CDs@SiO₂) as tags. SiO₂ as a nanocarrier can effectively improve the bio-functionalization and utilization rate of carbon dots. Moreover, several R-CDs embedded in SiO₂ nanospheres can magnify the fluorescence signal and improve sensitivity. R-CDs@SiO₂ conjugate anti-DEP antibody (Ab) as fluorescent immunosensor, which can specifically recognize DEP. Under optimization conditions, the detection limit (LOD) of this FIA was calculated as 0.0011 ng/mL. In addition, the recoveries of this established FIA ranged from 96.8 to 108.5%, showing satisfactory accuracy. Compared with GC-MS/MS (LOD µg/mL), the sensitivity of the FIA was significantly improved. As a result, the FIA developed using R-CDs@SiO₂ as tags has a high potential for determining trace DEP.

Novel one-point calibration strategy for high-throughput quantitation of microcystins in freshwater using LC-MS/MS

Precise quantification of microcystins (MCs) in freshwater is crucial for environmental monitoring and human health. However, the preparation of traditional multi-sample external calibration curve (MSCC) is time consuming and prone to error. Here, a novel one-point calibration strategy including one sample multi-point calibration curve (OSCC) and in sample calibration curve (ISCC) is proposed for the quantitation of eight MCs in freshwater lakes using liquid chromatography tandem mass spectrometry (LC-MS/MS). The multiple isotopologue reaction monitoring (MIRM) of MCs and its ¹⁵N-labelled internal standards were used for OSCC and ISCC, respectively. The isotopic abundance of each MIRM channel could be calculated and measured accurately. Additionally, this strategy was comprehensively validated and showed good performance in selectivity, sensitivity, accuracy and precision as the traditional MSCC. Interestingly, OSCC could realize sample dilution by monitoring the less abundant MIRM transitions, while ISCC remove blank matrixes and generate calibration curve in each study samples. Furthermore, the proposed methodology was successfully applied to analyze several freshwater lake samples contaminated by MCs. Considering the advantages of excluding the MSCC preparation, simplified workflows and improved throughput, OSCC and ISCC will be favored for MCs monitoring and as an emerging approach in environmental pollutant control and prevention.

Recent advances in nanomaterials-based optical and electrochemical aptasensors for detection of cyanotoxins

The existence of cyanotoxins poses serious threats to human health, it is highly desirable to develop specific and sensitive methods for rapid detection of cyanotoxins in food and water. Due to the distinct advantages of aptamer including high specificity, good stability and easy preparation, various aptamer-based sensors (aptasensors) have been proposed to promote the detection of cyanotoxins. In this review, we summarize recent advance in optical and electrochemical aptasensors for cyanotoxins sensing by integrating with versatile nanomaterials or innovative sensing strategies, such as colorimetric aptasensors, fluorescent aptasensors, surface enhancement Raman spectroscopy-based aptasensors, voltammetric aptasensors, electrochemical impedance spectroscopy-based aptasensors and photoelectrochemical aptasensors. We highlight the accomplishments and advancements of aptasensors with improved performance. Furthermore, the current challenges and future prospects in cyanotoxins detection are discussed from our perspectives, which we hope to provide more ideas for future researchers.

CRISPR-Cas12a-Based Aptasensor for On-Site and Highly Sensitive Detection of Microcystin-LR in Freshwater

On-site monitoring of trace organic pollutants with facile methods is critical to environmental pollutant prevention and control. Herein, we proposed a CRISPR-Cas12a-based aptasensor platform (named as MC-LR-Casor) for on-site and sensitive detection of microcystin-LR (MC-LR). After hybridization with blocker DNA, the MC-LR aptamers were conjugated to magnetic beads (MBs) to get the MB aptasensor. In the presence of MC-LR, their interactions with aptamers were triggered and the specific binding caused the release of blocker DNA. Using the programmability of the CRISPR-Cas system, the released blocker DNA was designed to activate a Cas12a-crRNA complex. Single strand DNA reporters were rapidly cleaved by the complex. Signal readout could be achieved by fluorometer or lateral flow strips, which were positively correlated to MC-LR concentration. Benefiting from the CRISPR-Cas12a amplification system, the proposed sensing platform exhibited high sensitivity and reached the limit of detection of ∼3 × 10^-6 μg/L (fluorescence method) or 1 × 10^-3 μg/L (lateral flow assay). In addition, the MC-LR-Casor showed excellent selectivity and good recovery rates, demonstrating their good applicability for real water sample analysis. During the whole assay, only two steps of incubation at a constant temperature were required and the results could be visualized when employing flow strips. Therefore, the proposed assay offered a simple and convenient alternative for in situ MC-LR monitoring, which may hold great promise for future environmental surveillance.

Immunoassay technology: Research progress in microcystin-LR detection in water samples

Increasing global warming and eutrophication have led to frequent outbreaks of cyanobacteria blooms in freshwater. Cyanobacteria blooms cause the death of aquatic and terrestrial organisms and have attracted considerable attention since the 19th century. Microcystin-LR (MC-LR) is one of the most typical cyanobacterial toxins. Therefore, the fast, sensitive, and accurate determination of MC-LR plays an important role in the health of humans and animals. Immunoassay refers to a method that uses the principle of immunology to determine the content of the tested substance in a sample using the tested substance as an antigen or antibody. In analytical applications, the immunoassay technology could use the specific recognition of antibodies for MC-LR detection. In this review, we firstly highlight the immunoassay detection of MC-LR over the past two decades, including classical enzyme-link immunosorbent assay (ELISA), modern immunoassay with optical signal, and modern immunoassay with electrical signal. Among these detection methods, the water environment was used as the main detection system. The advantages and disadvantages of the different detection methods were compared and analyzed, and the principles and applications of immunoassays in water samples were elaborated. Furthermore, the current challenges and developmental trends in immunoassay were systematically introduced to enhance MC-LR detection performance, and some critical points were given to deal with current challenges. This review provides novel insight into MC-LR detection based on immunoassay method.

Prussian blue nanoparticles-enabled sensitive and accurate ratiometric fluorescence immunoassay for histamine

Herein, a nanozyme-mediated ratiometric fluorescence immunoassay for histamine (HA) has been developed. Prussian blue nanoparticles (PBNPs) with outstanding peroxidase-like activity were labelled with goat anti-mouse IgG via a facile electrostatic adsorption to yield the nanozyme-antibody conjugate which acted as a bridge to link the ratiometric fluorescence readout with HA concentration. As substrate, o-phenylenediamine (OPD) was oxidized into 2,3-diaminophenazine (oxOPD) by H2O2 under the catalysis of PBNPs, producing a novel emission at 570 nm and quenching the fluorescence of carbon dots (CDs) at 450 nm simultaneously. Under optimal conditions, the ratio of fluorescence intensity at 570 nm and 450 nm (I570/I450) linearly correlated with HA concentration ranging from 1.6 ng/mL to 125 μg/mL, with a detection limit (LOD) of 1.2 ng/mL. In addition, analytical performances including specificity, accuracy and applicability were evaluated, which revealed that this ratiometric fluorescence immunoassay affords an effective platform for sensitive and accurate detection of HA.

Rapid FRET-based homogeneous immunoassay of procalcitonin using matched carbon dots labels

A novel method for the detection of procalcitonin in a homogeneous system by matched carbon dots (CDs) labeled immunoprobes was proposed based on the principle of FRET and double antibody sandwich method. Blue-emitting carbon dots with a strong fluorescence emission range of 400-550 nm and red-emitting carbon dots with the best excitation range of 410-550 nm were prepared before they reacted with procalcitonin protoclone antibody pairs to form immunoprobes. According to the principles of FRET, blue-emitting carbon dots were selected as the energy donor and red-emitting carbon dots as the energy receptor. The external light source excitation (310 nm) could only cause weak luminescence of CDs. However, once procalcitonin was added, procalcitonin and antibodies would be combined with each other quickly (≤20 min). Here, blue-emitting carbon dots acquired energy could be transferred to red-emitting carbon dots efficiently, causing the emitted fluorescence enhancement of red-emitting carbon dots. The fluorescence detection results in PBS buffer solution and diluted rabbit blood serum showed that the fluorescence intensity variation was linear with the concentration of procalcitonin. There was a good linear relationship betweenF/F0 and procalcitonin concentrations in PBS buffer solution that ranged from 0 to 100 ng ml^-1, and the linear equation wasF/F0 = 0.004 *C_pct + 0.98359. Detection in the diluted rabbit serum led to the results that were linear in two concentration ranges, including 0-40 ng ml^-1and 40-100 ng ml^-1, and the detection limit based on 3σK^-1was 0.52 ng ml^-1. It is likely that this matched CDs labeled immunoprobes system can provide a new mode for rapid homogeneous detection of disease markers.

Ultrasensitive photoelectrochemical microcystin-LR immunosensor using carboxyl-functionalized graphene oxide enhanced gold nanoclusters for signal amplification

An ultrasensitive photoelectrochemical (PEC) immunosensor based on gold nanoclusters (AuNCs) with 11-mercaptoundecanoic acid (MUA) ligands was fabricated for determination of microcystin-LR (MC-LR). The PEC immunosensor was developed by loading the monoclonal MC-LR antibody (Ab) to the MUA-AuNCs modified gold electrodes. After different measurement conditions being optimized, silver nanoparticles (AgNPs), gold nanorods (AuNRs), graphene oxide (GO) and carboxyl-functionalized graphene oxide (cGO) were introduced into MUA-AuNCs to enhance the sensing properties. The experimental result revealed that the sensitivity of PEC immunosensors was enhanced by both their photoelectrochemical properties and antibody loading properties with dependent relationship, which was different from the enhancement strategy of PEC sensors based on redox reactions. Among different hybrid nanocomposites, MUA-AuNCs/cGO not only improved the photoelectrochemical properties, but also loaded more antibodies for sensing, which resulted in best sensing performance. Thus, a universal method was proposed to enhance the sensing performance of PEC immunosensors based on impedance changes. Finally, MUA-AuNCs/cGO based PEC immunosensors exhibited a wide linear range of 0.001 nM-1000 nM with low detection limit of 0.011 pM (S/N = 3) for MC-LR determination. Meanwhile, the designed PEC immunosensors showed high selectivity, reproducibility and specificity, which provided the promising applications in aquatic environment.

Cell density-dependent regulation of microcystin synthetase genes (mcy) expression and microcystin-LR production in Microcystis aeruginosa that mimics quorum sensing

As the secondary metabolites of cyanobacterial harmful algal blooms (Cyano-HABs), microcystins (MCs) were generated under various environmental and cellular conditions. The understanding of the causes of MCs generation is of great interest in the field of water treatment and environmental science. In this work, we studied how Microcystis aeruginosa (FACHB-905) cell densities affect the MCs synthetase genes (mcy) expression, microcystin-LR (MC-LR) and quorum sensing molecules (Acyl-homoserine lactones (AHLs)) production. An electrochemical sensor was developed here for sensitive and quantitative detection of MC-LR that cultured at different cell densities. The results showed that mcy expression and MC-LR concentration started to increase when the cell density reached ca. 22 × 10⁶ cells/mL, and was significantly increased with increasing cell densities. Moreover, the up-regulation of AHLs with increasing cell densities revealed that MC-LR is quorum sensing-mediated. Our results undoubtedly confirmed that MC-LR was produced in a cell density-dependent way that mimics quorum sensing, and the minimum cell density (ca. 22 × 10⁶ cells/mL) that was required to produce MC-LR was provided and offered a reference standard for the prevention and control of MCs pollution in the actual water environment.

Selection of Covalent Organic Framework Pore Functionalities for Differential Adsorption of Microcystin Toxin Analogues

Microcystins (MCs), produced by Microcystis sp, are the most commonly detected cyanotoxins in freshwater, and due to their toxicity, worldwide distribution, and persistence in water, an improvement in the monitoring programs for their early detection and removal from water is necessary. To this end, we investigate the performance of three covalent organic frameworks (COFs), TpBD-(CF₃)₂, TpBD-(NO₂)₂, and TpBD-(NH₂)₂, for the adsorption of the most common and/or toxic MC derivatives, MC-LR, MC-RR, MC-LA, and MC-YR, from water. While MC-LR and MC-YR can be efficiently adsorbed using all three COF derivatives, high adsorption efficiencies were found for the most lipophilic toxin, MC-LA, with TpBD-(NH₂)₂, and the most hydrophilic one, MC-RR, with TpBD-(NO₂). Theoretical calculations revealed that MC-LA and MC-RR have a tendency to be located mainly on the COF surface, interacting through hydrogen bonds with the amino and nitro functional groups of TpBD-(NH₂)₂ and TpBD-(NO₂)₂, respectively. TpBD-(NO₂)₂ outperforms the adsorbent materials reported for the capture of MC-RR, resulting in an increase in the maximum adsorption capacity by one order of magnitude. TpBD-(NH₂)₂ is reported as the first efficient adsorbent material for the capture of MC-LA. Large differences in desorption efficiencies were observed for the MCs with different COFs, highlighting the importance of COF-adsorbate interactions in the material recovery. Herein we show that efficient capture of these toxins from water can be achieved through the proper selection of the COF material. More importantly, this study demonstrates that by careful choice of COF functionalities, specific compounds can be targeted or excluded from a group of analogues, providing insight into the design of more efficient and selective adsorbent materials.

A Mini-Review on Detection Methods of Microcystins

Cyanobacterial harmful algal blooms (CyanoHABs) produce microcystins (MCs) which are associated with animal and human hepatotoxicity. Over 270 variants of MC exist. MCs have been continually studied due of their toxic consequences. Monitoring water quality to assess the presence of MCs is of utmost importance although it is often difficult because CyanoHABs may generate multiple MC variants, and their low concentration in water. To effectively manage and control these toxins and prevent their health risks, sensitive, fast, and reliable methods capable of detecting MCs are required. This paper aims to review the three main analytical methods used to detect MCs ranging from biological (mouse bioassay), biochemical (protein phosphatase inhibition assay and enzyme linked immunosorbent assay), and chemical (high performance liquid chromatography, liquid chromatography-mass spectrometry, high performance capillary electrophoresis, and gas chromatography), as well as the newly emerging biosensor methods. In addition, the current state of these methods regarding their novel development and usage, as well as merits and limitations are presented. Finally, this paper also provides recommendations and future research directions towards method application and improvement.

Synthesis of magnetic core–shell Fe3O4@PDA@Cu-MOFs composites for enrichment of microcystin-LR by MALDI-TOF MS analysis

The synthetic route of the Fe₃O₄@PDA@Cu-MOFs microspheres and enrichment process of MC-LR.