Synergism of transition metal (Co, Ni, Fe, Mn) nanoparticles and "active support" Fe3O4@C for catalytic reduction of 4-nitrophenol

Electron transfer enhanced catalytic activity of nitrogen doped reduced graphene oxide supported CuCo2O4 towards the fast reduction of 4-nitrophenol in water

There has been a growing interest in the design and development of graphene based composite materials with superior performances for environmental catalytic applications. But in most of the studies the synthesis conditions require elevated temperatures and expensive working setups (high temperature furnaces, autoclaves, inert atmosphere conditions etc.). In this reported work, the nitrogen doped reduced graphene oxide supported CuCo2O4 (NG/CuCo2O4) composites were prepared through a simple one pot synthesis method under mild conditions (∼95 °C and air atmosphere) and successfully employed as catalysts for the reduction of toxic 4-nitrophenol (4NP). The characterization results revealed the successful formation of NG/CuCo2O4 composites with a possible charge transfer interaction between nitrogen doped reduced graphene oxide support of CuCo2O4. The NG/CuCo2O4 hybrids exhibited robust catalytic activity in 4NP reduction with an activity factor of 261.5 min-1 g-1. A 4NP conversion percentage which is as high as 99.5% was achieved within 11 min using the NG/CuCo2O4 catalyst. The detailed kinetic analysis confirmed the Langmuir-Hinshelwood model for the NG/CuCo2O4 catalysed 4NP reduction. The nitrogen doped reduced graphene oxide support modified the electronic levels of CuCo2O4 nanoparticles through electron transfer interactions and enhanced the catalytic activity of CuCo2O4 in NG/CuCo2O4 through improved adsorption of reactant ions and effective generation of active hydrogen species. The good reusability and stability along with profound activity of NG/CuCo2O4 catalyst makes it a promising material for wide scale catalytic applications.

Preparation of Activated Carbon-Reinforced Composite Beads Based on MnO2/MCM-41@Fe3O4 and Calcium Alginate for Efficient Removal of Tetracycline in Aqueous Solutions

Tetracycline (TC) is a common antibiotic; when untreated TC enters the environment, it will cause a negative impact on the human body through the food chain. In the present study, MnO2/MCM-41@Fe3O4 (FeMnMCM) prepared using a hydrothermal and redox method and Camellia oleifera shell-activated carbon (COFAC) prepared through alkali activation were encapsulated using alginate (ALG) and calcium chloride as a cross-linking matrix to give the composite beads COFAC-FeMnMCM-ALG. The resultant COFAC-FeMnMCM-ALG composite beads were then carefully characterized, showing a high immobilization of MnO2/MCM-41@Fe3O4, with porous COFAC as an effective bioadsorbent for enriching the pollutants in the treated samples. These bead catalysts were subsequently applied to the oxidative degradation of TC in a Fenton oxidation system. Several parameters affecting the degradation were investigated, including the H2O2 concentration, catalyst dosage, initial TC concentration, and temperature. A very high catalytic activity towards the degradation of TC was demonstrated. The electron paramagnetic resonance (EPR) and quenching results showed that ·OH and ·O2- were generated in the system, with ·OH as the main radical species. In addition, the COFAC-FeMnMCM-ALG catalyst exhibited excellent recyclability/reusability. We conclude that the as-prepared COFAC-FeMnMCM-ALG composite beads, which integrate MnO2 and Fe3O4 with bioadsorbents, provide a new idea for the design of catalysts for advanced oxidation processes (AOPs) and have great potential in the Fenton oxidation system to degrade toxic pollutants.

FeCx-coated biochar nanosheets as efficient bifunctional catalyst for electrochemical detection and reduction of 4-nitrophenol

Herein, we present the exceptional performance of FeCx-coated carbon sheets (FC) derived from the pyrolysis of waste biomass as a bifunctional catalyst for electrochemical detection and catalytic reduction of 4-nitrophenol (4-NP). Despite having a lower surface area, larger particle size, and lesser N content, the FC material prepared at a calcination temperature of 900 °C (FC900) outperforms the other samples. Deeper investigations revealed that the FC900 efficiently facilitates the charge transfer process and enhances the diffusion rate of 4-NP, leading to increased surface coverage of 4-NP on the surface of FC900. Additionally, relatively weaker interactions between 4-NP and FC900 allow the facile adsorption and desorption of reaction intermediates. Due to the synergetic interplay of these factors, FC900 exhibited a linear response to changes in 4-NP concentration from 1 μM to 100 μM with a low limit of detection (LOD) of 84 nM (S/N = 3) and high sensitivity of 12.15 μA μM-1 cm-2. Importantly, it selectively detects 4-NP in the presence of five times more concentrated 2-aminophenol, 4-aminophenol, catechol, resorcinol, and hydroquinone and ten times more concentrated metal salts such as Na2SO4. NaNO3, KCl, CuCl2, and CaCl2. Moreover, FC900 can accurately detect micromolar levels of 4-NP in river water with high recovery values (99.8-103.5 %). In addition, FC900 exhibited outstanding catalytic activity in reducing 4-NP to 4-aminophenol (4-AP), achieving complete conversion within 8 min with a high-rate constant of 0.42 min-1. FC900 also shows high recyclability in six consecutive catalytic reactions due to Fe magnetic property.

Active metals decorated NiCo2O4 yolk-shell nanospheres as nanoreactors for catalytic reduction of nitroarenes and azo dyes

Transition-metal oxides (TMOs) have received a great deal of research attention and have been widely used in a variety of fields. However, conventional TMOs do not possess high specific surface area, sufficient active site on their surfaces, and limited their applications in catalysis. This study presents a two-step method for synthesizing active metal (M) decorated NiCo2O4 (M/NiCo2O4, M = Pd or Cu) nanospheres with yolk-shell nanostructures. Taking advantage of the unique morphology and the combination of dual active components (i.e., active NiCo2O4 substrate and decorated active metal), the as-prepared M/NiCo2O4 yolk-shell nanospheres can be employed as nanoreactors in the organic reactions. In catalyzing the reduction of a representative nitroarene (i.e., 4-NP) by NaBH4, the Pd/NiCo2O4 nanoreactors exhibit a superior catalytic efficiency to their counterparts (Cu/NiCo2O4 and NiCo2O4). The turnover frequency is much higher than that of various TMOs supported nanocatalysts have been reported over the past five years. Furthermore, the Pd/NiCo2O4 nanoreactors show excellent stability and common applicability of the reduction of various substituted nitrobenzenes and azo dyes. This work provides new rational design concept and preparation strategy for efficient nanoreactors with dual active components and sheds light on the practical application of chemical reactions.

Green preparation of silver nanocluster composite AgNCs@CF-g-PAA and its application: 4-NP catalytic reduction and hydrogen production

4-Nitrophenol (4-NP) is a serious organic environmental pollutant. Conversion of 4-nitrophenol to 4-aminophenol (4-AP) by catalytic hydrogenation is an effective solution. In this work, a catalyst (AgNCs@CF-g-PAA) loaded with silver nanoclusters (AgNCs) was prepared by radiation technique. Firstly, the template polyacrylic acid (PAA) was grafted onto the cotton fiber (CF) by radiation grafting technique to obtain a solid template (CF-g-PAA). After that, AgNCs were synthesized in situ on CF-g-PAA by radiation reduction, and the composite material AgNCs@CF-g-PAA was obtained directly. AgNCs@CF-g-PAA has an obvious photoluminescence phenomenon, which is attributed to the stable AgNCs binding to the carboxyl on the PAA molecular chain. Due to the extremely small size of AgNCs, AgNCs@CF-g-PAA has good catalytic characteristics. The prepared AgNCs@CF-g-PAA catalyst has a very high catalytic rate for the hydrogenation of 4-NP. Even at high concentrations of 4-NP, AgNCs@CF-g-PAA can still maintain a high catalytic rate. At the same time, the AgNCs@CF-g-PAA catalyst can also be used to catalyze the rapid hydrolysis of sodium borohydride, which is conducive to hydrogen production. In summary, we have prepared a practical catalyst AgNCs@CF-g-PAA with high catalytic performance based on cheap raw materials and a simple synthesis route, which provides a catalyst candidate for the treatment of water contaminant 4-NP and the production of hydrogen from sodium borohydride.

Ni-Pd-Incorporated Fe3O4 Yolk-Shelled Nanospheres as Efficient Magnetically Recyclable Catalysts for Reduction of N-Containing Unsaturated Compounds

The use of metal-based heterogeneous catalysts for the degradation of N-containing organic dyes has attracted much attention due to their excellent treatment efficiency and capability. Here, we report the synthesis of heterometals (Ni and Pd)-incorporated Fe3O4 (Ni-Pd/Fe3O4) yolk-shelled nanospheres for the catalytic reduction of N-containing organic dyes using a facile combination of solvothermal treatment and high-temperature annealing steps. Benefiting from the magnetic properties and the yolk-shelled structure of the Fe3O4 support, as well as the uniformly dispersed active heterometals incorporated in the shell and yolk of spherical Fe3O4 nanoparticles, the as-prepared Ni-Pd/Fe3O4 composite shows excellent recyclability and enhanced catalytic activity for three N-containing organic dyes (e.g., 4-nitrophenol, Congo red, and methyl orange) compared with its mono metal counterparts (e.g., Ni/Fe3O4 and Pd/Fe3O4). In the 4-nitrophenol reduction reaction, the catalytic activity of Ni-Pd/Fe3O4 was superior to many Fe3O4-supported nanocatalysts reported within the last five years. This work provides an effective strategy to boost the activity of iron oxide-based catalytic materials via dual or even multiple heterometallic incorporation strategy and sheds new light on environmental catalysis.

Facile insitu preparation of silver nanoparticles supported on petroleum asphaltene-derived porous carbon for efficient reduction of nitrophenols

Herein, a facile in situ approach to synthesize catalytically active Ag nanoparticles supported on eco-friendly asphaltene-derived porous carbon (APC) was reported. Asphaltene-derived porous carbon was used as support for the first time for Ag@APC to prevent nanoparticles from aggregation, and then was evaluated as catalyst for the reduction of 4-nitrophenol (PNP), 2,4-dinitrophenol (DNP), and 2,4,6-trinitrophenol (TNP). The synthesized Ag nanoparticles were characterized by XRD, UV, BET, FESEM, TEM, and ICP analyses, revealing the formation of uniformly distributed, fcc structured crystalline Ag nanoparticles with BET surface area varied between 1500 and 1723 cm⁻¹ with a porous carbon surface. Ag@APC nanocatalyst showed high catalytic efficiency in the reduction of nitrophenols in the presence of NaBH₄ under mild conditions. The reduction of PNP, DNP, and TNP have pseudo-first-order rate constants of 0.3340, 0.2570, and 0.2408 min⁻¹, respectively. The catalyst could be recyclable and reused for at least five successive runs without losing its original activity.

•

Asphaltene-derived porous carbon (APC) was used as a support for Ag nanocatalyst (Ag@APC) for the first time.

•

Facile in-situ preparation of Ag@APC catalyst.

•

High catalytic efficiency (approximately 100%) in the nitrophenol reductions.

•

High stability and reusability of Ag@APC catalyst.

A comparative study of Cu-anchored 0D and 1D ZnO nanostructures for the reduction of organic pollutants in water

In this work, Cu NPs were loaded at a fixed percentage (5 wt%) on 1D, (1D + 0D) and 0D ZnO nanostructures to investigate the effect of the support morphology on the reduction of organic pollutants in water. The synthesized materials were characterized by high-resolution transmission electron microscopy (HR-TEM), ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), N2 adsorption-desorption and X-ray photoelectron spectroscopy (XPS). The results reveal that the loading of Cu NPs decreases the optical band gap, and a slight change in the crystallite sizes increases the specific surface area value of the nanocomposites. The TEM images reveal that 1D ZnO has an average width of 44.7 nm and an average length of 211 nm, while 0D ZnO has an average diameter of 54.5 nm. The HR-TEM and XPS data confirm the loading of metallic Cu NPs on the surface of the ZnO nanostructures. The pure ZnO and nanocomposites were tested for 4-nitrophenol (4-NP) reduction in the presence of NaBH4 at room temperature. The obtained results show that pure ZnO nanostructures have no catalytic performance, while the nanocomposites showed good catalytic activities. The catalytic reduction efficiency of 4-NP was found to follow the order of Cu/0DZnO > Cu/(1D + 0D)ZnO > Cu/1DZnO. The complete reduction of 4-NP has been observed to be achievable within 60 s using the Cu/0DZnO nanocomposite, with a k app value of 8.42 min-1 and good recyclability of up to five cycles. This nanocomposite was then applied in the reduction of organic dyes in water; it was found that the reduction rate constants for the methylene blue, Congo red, and acriflavine hydrochloride dyes were 1.4 min-1, 1.2 min-1, and 3.81 min-1, respectively. The high catalytic performance of this nanocomposite may be due to the small particle size, high specific surface area, and the high dispersion of Cu NPs on the surface of ZnO.

Biogenic synthesis of silver anchored ZnO nanorods as nano catalyst for organic transformation reactions and dye degradation

In this study, we are reporting biogenic synthesis of silver nanoparticles and hydrothermal synthesis of zinc oxide nanoparticles. Using convenient mechanical milling methods, nanocomposites with superior photocatalytic and catalytic properties are synthesized. Herein, we have adopted a green, eco-friendly, and economical route for the synthesis of Ag nanoparticles using Zingiber officinalae rhizome extract in an aqueous solution. The synthesized materials were characterized using UV–Vis spectroscopy, XRD, SEM & FE-SEM, FT-IR, Raman, and a particle size analyzer with zeta potential analysis. The photocatalytic activities of Ag, ZnO and their composites were studied by observing the degradation of methylene blue and crystal violet dyes under natural sunlight. Then the catalytic efficacies of synthesized nanoparticles for various organic transformation reactions were studied. Ag–ZnO nanocomposites were predicted to have improved photocatalytic activity and organic transformation reactions, allowing them to be used in environmental remediation applications.

Metallic Copper-Containing Composite Photocatalysts: Fundamental, Materials Design, and Photoredox Applications

Semiconductor photocatalysis has long been regarded as a potential solution to tackle the energy and environmental challenges since the first discovery of water splitting by TiO₂ almost 50 years ago. The past few years have seen a tremendous flurry of research interest in the modification of semiconductors because of their shortcomings in the aspects of solar harvesting, electron-hole pairs separation, and utilization of photogenerated carriers. Among the various strategies, the introduction of metallic copper into the photocatalysis system can not only enhance the absorption of sunlight and the separation efficiency of photogenerated electrons and holes, but also increase the adsorption ability of substrate and the number of active sites, so as to realize the high solar to chemical energy conversion efficiency. This review focuses on the rational design of copper-based composites and their applications in photoredox catalysis. First, the preparation methods of metallic copper-containing composites are discussed. Then, the applications of different types of copper-based composites in the photocatalytic removal of pollutants, splitting of water to hydrogen production, reduction of carbon dioxide, and conversion of organic matter are introduced. Finally, the opportunities and challenges in the design and synthesis of copper-based composites and their applications in the photocatalysis are prospected.

Synthesis of bimetallic Co–Pt/cellulose nanocomposites for catalytic reduction of p-nitrophenol

The sonochemical synthesis of Co–Pt nanoparticles anchored on cellulose nanofibers (CNFs) was demonstrated. An enhancement in the catalytic activity of the synthesized Co–Pt/CNF nanocomposite catalyst was observed for the reduction of p-NP due to synergy effects.

In situ preparation of highly dispersed Pd supported on exfoliated layered double hydroxides via nitrogen plasma for 4-nitrophenol reduction

In this work, a simple and environmental-friendly nitrogen glow discharge plasma reduction method has been developed for synthesizing palladium nanoparticles (PdNPs) supported on exfoliated Mg-Al-layered double hydroxide (Pd/LDH) catalysts. The as-prepared catalysts were characterized by means of characterizations methods, which contain X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectrometry (XPS), and Fourier transform infrared (FT-IR). Highly dispersed ultrafine PdNPs were supported on exfoliated, defect-induced LDHs uniformly without agglomeration. The effects of treatment time of nitrogen plasma and Pd loading amount on structure, morphology, and catalytic performance of Pd/LDHs were investigated. The comparisons of structure and morphology between LDHs and Pd/LDHs were also discussed. The average particle size of as-synthesized PdNPs with face-centered cubic structure is 2.01 nm, which ranges from 1.18 to 3.01 nm. Nitrogen plasma cannot only reduce Pd²⁺, but also exfoliate LDHs, introduce defects, and even destroy the structure of LDHs. The Pd/LDH catalyst with 1 wt% Pd loading under nitrogen plasma treatment for 60 min showed the best catalytic performance in 4-nitrophenol reduction. The turnover frequency (TOF) of as-prepared catalyst is 20-fold higher than that of commercial Pd/C catalyst.

Preparation of Sn/Fe nanoparticles for Cr (III) detection in presence of leucine, photocatalytic and antibacterial activities

In this project, Sn-Fe bimetallic nanoparticles were prepared by a facile method. The bimetallic nanoparticles of it could be well established by a field emission scanning electron microscope micrographs. Due to the excellent synergistic influence between Sn-Fe nanoparticles and leucine indicated a great performance for determination of Cr³⁺. The material was characterized using the XRD, DLS, and zetasizer for theevaluation of crystal structure and morphologyinformation.The potential and effective size of Sn-Fe NPs was -29.10 mV and 30 nm, respectively. Cr³⁺ ions interaction with the Sn-Fe NPs-leucine probe was carried out in 1 min as response time. The limit of detection of Sn-Fe NPs for Cr(III) colorimetric method was 0.25 nM. The prepared nanoparticles showed impressive photocatalysis efficiency for degradation of MO was about 95.1% in 35 min, thus the prepared nanoparticles may be developed for the detoxification of pollution. The prepared nanoparticles depicted effective antibacterial activity againstC. botulinum and, H. pylori bacteria.