N, P and S co-doped carbon materials derived from polyphosphazene for enhanced selective U(VI) adsorption

Elimination of uranium pollution from coastal nuclear power plant by marine microorganisms: Capability and mechanism

Uranium is one of the sensitive radionuclides in the wastewater of nuclear powers. Due to the fact that nuclear powers are mainly located in coastal areas, the elimination of uranium (U(VI)) pollution from coastal nuclear power is ultimately rely on marine microorganisms. The fixing of U(VI) on V. alginolyticus surface or converting it into sediments is an effective elimination strategy for U(VI) pollution. In this work, typical marine microorganism V. alginolyticus was used to evaluate the elimination of U(VI) pollution by marine microorganisms. Effects of solution conditions (such as pH, temperature, and bacterium concentrations) on the physicochemical properties and elimination capabilities of V. alginolyticus were studied in detail. FT-IR, XPS and XRD results reveal that COOH, NH2, OH and PO4 on V. alginolyticus were main functional groups for U(VI) elimination and formed (UO2)3(PO4)2·H2O. The elimination of U(VI) by V. alginolyticus includes two stages of adsorption and biomineralization. The theoretical maximum adsorption capacity (Cs,max) of V. alginolyticus for U(VI) can reach up to 133 mg/g at pH 5 and 298 K, and the process reached equilibrium in 3 h. Results show that V. alginolyticus play important role in the elimination of U(VI) pollution in seawater.

Polyvinyl alcohol/phytic acid/phosphorylated chitosan hydrogel electrode highly efficient electroadsorption of low concentration uranium from uranium tailings leachate

In order to improve the removal rate of uranium and reduce the harm of radioactive pollution, a physically crosslinked polyvinyl alcohol/phosphorylated chitosan (PPP) hydrogel electrode was designed by freezing thawing method. The results show that PPP hydrogel has a good adsorption effect on uranium, and 200 mL of uranium tailings leachate is absorbed, and the treatment efficiency reaches 100 % within 15 min. PPP hydrogel can adapt to a wide range of pH conditions and exhibit excellent adsorption efficiency in the range of 3-9. At the same time, PPP hydrogel maintains an adsorption efficiency of over 85 % for 950 mg/L uranium solution. This lays the foundation for the practical application of PPP hydrogel. In addition, PPP hydrogel also exhibits good repeatability, after 7 cycles, the material still retains 95 % of its initial performance. The synergistic effect of various functional groups such as phosphate, hydroxyl, and ammonium in the material is the main mechanism of PPP's adsorption capacity for uranium. Furthermore, electrochemical adsorption method significantly enhances the adsorption performance of PPP hydrogel.

Graphitic N-doped biochar for superefficient uranium recycling from nuclear wastewater

N-doped biochar (AL-N/BC) prepared by pyrolyzing lignin in various temperatures manifested superefficient performance for uranium (U) recycling from nuclear wastewater. The optimist AL-N/BC-700 showed higher adsorption capacity of 25,000 mg/g and faster kinetics of 4100 g·min^-1·mg^-1 than the most of reported adsorbents, and excellent adsorption-desorption capability (adsorption rate > 90 % and desorption rate > 70 % after 12 cycles). Moreover, the high applicability of AL-N/BC-700 was verified by its superefficient U(VI) adsorption performance in a broad working pH range, various water matrices, and high irradiation stability. Furthermore, the adsorption mechanism discloses the significant role of graphitic N, rather than pyridinic N or pyrrolic N, for U(VI) adsorption. Overall, this work not only presents an applicable approach to alleviate the increasingly serious energy crisis via recycling U(VI) from nuclear wastewater, but also enriches the method of synthesizing N-doped materials for U(VI) adsorption.

Ultra-fast uranium capture via the synergistic interaction of the intrinsic sulfur atoms and the phosphoric acid groups adhered to edge sulfur of MoS2

In order to deal with the sudden nuclear leakage event to suppress the spread of radioactive contaminants in a short period of time, it is extremely urgent needed to explore an adsorbent that could be capable of in-situ remedial actions to rapidly capture the leaked radionuclides in split second. An adsorbent was developed that MoS₂ via ultrasonic to expose more surface defects afterwards functionalized by phosphoric acid resulting in more active sites being endowed on the edge S atoms of Mo-vacancy defects, while simultaneously increased the hydrophilicity and interlayer spacing. Hence, an overwhelming fast adsorption rates (adsorption equilibrium within 30 s) are presented and place the MoS₂-PO₄ at the top of performing sorbent materials. Moreover, the maximum capacity calculated from Langmuir model is as high as 354.61 mg·g^-1, the selective adsorption capacity (S_U) achieving 71.2% in the multi-ion system and with more than 91% capacity retention after 5 cycles of recycling. Finally, XPS and DFT insight into the adsorption mechanism, which can be explained as interaction of UO₂²⁺ on the surface of MoS₂-PO₄ by forming U-O and U-S bonds. The successful fabrication of such a material may provide a promising solution for emergency treatment of radioactive wastewater during nuclear leakage events.

Electrocatalytic and green system coupling strategy for simultaneous recovery and purification of uranium from uranium-containing wastewater

The recycling of uranium in wastewater is not only beneficial to the protection of ecological safety but also has great significance for the sustainable development of nuclear energy. However, there is no satisfactory method to recover and reuse uranium efficiently up to now. Here, we have developed an efficient and economical strategy that can achieve uranium recovery and direct reuse in wastewater. The feasibility analysis verified that the strategy still had good separation and recovery ability in acidic, alkaline, and high-salinity environments. The purity of uranium recovered from the separated liquid phase after electrochemical purification was up to about 99.95%. Ultrasonication could greatly increase the efficiency of this strategy, and 99.00% of high-purity uranium could be recovered within 2 h. We further improved the overall recovery rate by recovering the residual solid-phase uranium, and the overall recovery of uranium was increased to 99.40%. Moreover, the concentration of impurity ions in the recovered solution met the World Health Organization guidelines. In summary, the development of this strategy is of great importance for the sustainable use of uranium resources and environmental protection.

Mesoporous chitosan derivatives for effective uranyl sorption: Synthesis, characterization, and mechanism-application to ore leachate

Two sorbents were developed from chitosan aminophosphonation: via one-pot process to produce aminophosphonated derivative (r-AP), followed by further pyrolysis to produce mesoporous improved biochar (IBC). Sorbents structures were elucidated using CHNP/O, XRD, BET, XPS, DLS, FTIR, and pH_ZPC-titration. The IBC exhibits an improved specific surface (262.12 m²/g) and mesopore size (8.34 nm) compared to its organic precursor (r-AP), 52.53 m²/g and 3.39 nm. IBC surface is also enriched with high electron density heteroatoms (P/O/N). These unique merits of porosity and surface-active-sites improved sorption efficiency. Sorption characteristics were determined for uranyl recovery, and binding mechanisms were elucidated using FTIR and XPS. The maximum sorption capacity increased from 0.571 to 1.974 mmol/g for r-AP and IBC, respectively, roughly correlated with the active-sites density per mass. Equilibrium occurred within 60/120 min, and the half-sorption-time (t_HST) was decreased from 10.73 for r-AP to 5.48 min for IBC. Langmuir and pseudo-second-order equation fits experimental data well. Sorption is endothermic for IBC (whereas exothermic with r-AP), spontaneous, and governed by entropy change. Both sorbents show high durability over multiple-cycles with desorption efficiency >94 % over seven cycles using NaHCO₃ (0.25 M). The sorbents efficiently tested for U(VI) recovery from acidic ore leachate with outstanding selectivity coefficients.

A novel slag composite for the adsorption of heavy metals: Preparation, characterization and mechanisms

The utilization of solid waste for resource recovery and production of value-added products is the theme of green chemistry. Currently, how to using solid wastes to prepare environmentally-functional materials with high performance and strength is one of the hot topics. In this research, electrolytic manganese residue (EMR) was thermally activated with calcite to prepare a silicon-based functionalized adsorbent (C-EMR) for the removal of cadmium (Cd²⁺, 467.14 mg/g) and lead (Pb²⁺, 972 mg/g). The thermodynamic results indicated that the removal process of Cd²⁺ and Pb²⁺ by C-EMR were endothermic and spontaneous. HNO₃ can effectively strip the two adsorbed metals from C-EMR with the stripping efficiency of nearly 80% for Cd²⁺ and 99.92% for Pb²⁺, indicating that adsorption and ion exchange may be the main reason for the removal of the metals on C-EMR. Besides, surface precipitation was also responsible for removing some Pb²⁺ from the aquatic environment according to the X-ray photoelectron spectrometry (XPS) analysis. Results indicate that -SiO₃^- has stronger affinity with Pb²⁺ and Cd²⁺ than other groups ((-MnO₂), -OH) by theoretical calculation (VASP, GGA-PBE). This study shows that this novel adsorbent (C-EMR) can be adopted as an environmentally-friendly, inexpensive and efficient adsorbent for removal of Cd²⁺ and Pb²⁺ from aquatic solution. This technique not only provides potential adsorbent for the elimination of heavy metals but also proposes an alternative route for the treatment and utilization of waste solid.

Highly Efficient Removal of Uranium from an Aqueous Solution by a Novel Phosphonic Acid-Functionalized Magnetic Microsphere Adsorbent

The development of adsorption materials which can efficiently isolate and enrich uranium is of great scientific significance to sustainable development and environmental protection. In this work, a novel phosphonic acid-functionalized magnetic microsphere adsorbent Fe₃O₄/P (GMA-MBA)-PO₄ was developed by functionalized Fe₃O₄/P (GMA-MBA) prepared by distill-precipitation polymerization with O-phosphoethanolamine. The adsorption process was endothermic, spontaneous and kinetically followed the pseudo second-order model. The maximum uranium adsorption capacity obtained from the Langmuir model was 333.33 mg g^-1 at 298 K. In addition, the adsorbent also had good acid resistance and superparamagnetic properties, which could be quickly separated by a magnetic field. XPS analysis showed that the adsorption of adsorbent mainly depended on the complexation of phosphonic acid group with uranium. This work offers a promising candidate for the application of magnetic adsorbents in the field of uranium separation and enrichment.

Synthesis and characterization of waste commercially available polyacrylonitrile fiber-based new composites for efficient removal of uranyl from U(VI)-CO3 solutions

The existing species of uranium determines the design of novel sorbents towards uranium extraction from the natural waters. Herein, three composites based on waste commercially available polyacrylonitrile fiber (WPANF), namely WPANF/TiO₂·xH₂O, WPANF/CTAB-bentonite, and WPANF/NZVI, were first prepared and employed for the removal of U(VI) from the carbonate coexisted aqueous solutions. Among them, the WPANF/TiO₂·xH₂O exhibited the optimum sorption capacity of ~40.6 mg·g^-1 (pH 8.0, C₀ = 50 mg·L^-1, and [CO₃]_Total = 2 mmol·L^-1), which is significantly greater than the WPANF/CTAB-bentonite (~12.6 mg·g^-1) and WPANF/NZVI (~10.3 mg·g^-1). All sorption capacities decreased with the increases of initial pH, [NaCl], and [CO₃]_Total, due to the species transformation from UO₂(CO₃)₂^2- and (UO₂)₂CO₃(OH)₃^- to UO₂(CO₃)₃^4- that enhanced the electrostatic repulsion and the competitive sorption. The XPS analysis and DFT calculations indicated that in the composites, WPANF was a role in strengthening the mechanical properties of composites rather than the main sorption sites for uranyl carbonates. The sorption mechanisms were mainly involved in -OH group coordination, Br^- anions exchanges, and redox reactions. Desorption, reusability and U(VI) sorption test in the simulated seawater demonstrated that WPANF/TiO₂·xH₂O could be an alternative candidate for acquiring uranium resource. This work has screened the potential composites for U(VI) extraction from the natural waters, especially based on the practical U(VI) speciation, and provides a novel research approach for the removal of U(VI) towards U(VI)-CO₃ systems.

Electrochemical synthesis of EuVO4 for the adsorption of U(VI): Performance and mechanism

The efficient removal of uranium from aqueous solution remains of great challenge in securing water environment safety. In this paper, we reported a high temperature electrochemical method for the preparation of EuVO₄ with different morphologies from rare earth oxides and vanadate, which solved the problems of rare earth and vanadium recovery. The effects of pH, ionic strength, contact time, initial concentration and reaction temperature on the adsorption of U(VI) by prepared adsorbent were studied by static batch experiments. When the concentration of U(VI) standard is 100 mg g^-1, the maximum adsorption capacity of EuVO₄ is 276.16 mg g^-1. The adsorption mechanism was elucidated with zeta potential and XPS: 1) negatively charged EuVO₄ attracted UO₂²⁺ by electrostatic attraction; 2) exposed Eu, V, and O atoms complexed with U(VI) through coordination; 3) the hybrid of Eu was complex, which accommodated different electrons to interact. In the multi-ion system with Al³⁺, Zn²⁺, Cu²⁺, Ni²⁺, Cr²⁺ and Mn²⁺, EuVO₄ also showed good selective adsorption properties for U(VI). Five adsorption and desorption cycle experiments demonstrated that EuVO₄ possessed good renewable performance.

Assembly of three-dimensional ultralight poly(amidoxime)/graphene oxide nanoribbons aerogel for efficient removal of uranium(VI) from water samples

Assembling graphene oxide nanoribbons (GONRs) into three-dimensional (3D) materials with controllable and desired structure is an effective way to expand their structural features and enable their practical applications. In this work, an ultralight 3D porous amidoxime functionalized graphene oxide nanoribbons aerogel (PAO/GONRs-A) was prepared via solvothermal polymerization method using acrylonitrile as monomer and GONRs as solid matrices for selective separation of uranium(VI) from water samples. The PAO/GONRs-A possessed a high nitrogen content (13.5%), low density (8.5 mg cm^-3), and large specific surface area (494.9 m² g^-1), and presented an excellent high adsorption capacity of uranium, with a maximum capacity of 2.475 mmol g^-1 at a pH of 4.5, and maximum uranium-selectivity of 65.23% at a pH of 3.0. The results of adsorption experiments showed that U(VI) adsorption on PAO/GONRs-A was a pH-dependent, spontaneous and endothermic process, which was better fitted to the pseudo-second-order kinetic model and Langmuir isotherm model. Both X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations revealed that U(VI) adsorption on PAO/GONRs-A mainly did rely on the amidoxime groups anchored on the aerogel while UO₂(PAO)₂(H₂O)₃ was dominant after interaction of uranyl with PAO/GONRs-A. Therefore, as a candidate adsorbent, PAO/GONRs-A has a high potential for the removal of uranium from aqueous solutions.

Removal of cadmium and lead from aqueous solutions by thermal activated electrolytic manganese residues

Electrolytic manganese residues (EMR) is produced from the electrolysis manganese industry. In this study, the thermal activated EMRs (T-EMR) were used to adsorb cadmium and lead from aqueous solution. X-ray diffractometer (XRD), scanning electron microscope-Energy Dispersive Spectrometer (SEM-EDS), X-ray photoelectron spectroscopy (XPS) were adopted to characterize EMR before and after the modification, and the performance and adsorption mechanisms of T-EMR for cadmium and lead were determined. Results show that the pH has a strong influence on the adsorption of cadmium and lead and the maximum adsorption capacity can be achieved at pH 6. The adsorption of Cd(II) can be better fitted by the Lagergren pseudo-first-order dynamic model, while that of Pb(II) fits the pseudo-second-order kinetic model better. The Freundlich isotherm model fits the adsorption of two metals better than Langmuir model. The thermodynamic results demonstrate that the adsorption of Cd(II) or Pb(II) on T-EMR is endothermic and spontaneous. As the nitric acid with pH 0.5 was used, nearly all of the adsorbed Cd(II) and 75% Pb(II) can be desorbed from the loaded T-EMR. It is concluded that the adsorption of Cd(II) and Pb(II) on T-EMR is in virtue of electrostatic attraction, ion-exchange and surface precipitation. The heavy metals are mainly adsorbed on ferric and manganese oxides and silicate minerals in T-EMR by electrostatic attraction. In addition, cadmium and lead also can be adsorbed via the ion exchange reaction. Moreover, some Pb(II) are adsorbed by forming lead sulfate. Thus, T-EMR may be an environmentally-friendly, effective adsorbent for the removal of heavy metals from aqueous solution.

Bifunctional cyclomatrix polyphosphazene-based hybrid with abundant decorating groups: Synthesis and application as efficient electrochemical Pb(II) probe and methylene blue absorbent

HYPOTHESIS

The construction of novel functional cyclomatrix polyphosphazenes (CPPs) hybrid, which with diverse decorating groups, is a challenging task due to the structural limitation of available reaction substrates (phenols and amines).

EXPERIMENTS

Herein, a phenolic hydroxyl (OH) modified ployamide derivative (P2) was successfully prepared via novel benzoxazine-isocyanide chemistry (BIC). A kind of CPP hybrid (P3), which with abundant functional groups (amide, tertiary amine, benzoxazine and phenolic hydroxyl) was prepared subsequently by the condensation between P2 and hexachlorocyclotriphosphazene (HCCP). Chemical structure, elemental composition, morphology, porous properties and crystallinity of P3 were systematically analyzed here. The electrochemical detection of lead ion (Pb²⁺) was realized by using P3-modified glassy carbon electrode (GCE/Nafion/P3) as the working electrode. Besides this, given the unique chemical structure and morphology of P3, the selective adsorption of methylene blue (MB) by P3 was also studied here.

FINDINGS

Experimental results indicated that that P3 can act as bifunctional hybrid material to solve environmental issues.

Preparation of phosphorus-doped porous carbon for high performance supercapacitors by one-step carbonization

Biomass-derived porous carbon has received increasing attention as an energy storage device due to its cost-effectiveness, ease of manufacture, environmental friendliness, and sustainability. In this work, phosphorus-doped porous carbon was prepared from biomass sawdust (carbon source) and a small amount of phosphoric acid (P-doping source and gas expanding agent) by one-step carbonization. For comparison, parallel studies without phosphate treatment were performed under the same conditions. Benefiting from the addition of phosphoric acid, the prepared carbon material has higher carbon yield, higher specific area and micropore volume. Due to the heteroatom doping of P in the carbon material, the optimized PC-900 sample not only exhibits high specific capacitances of 292 F g⁻¹ and 169.4 F g⁻¹ at current densities of 0.1 A g⁻¹ and 0.5 A g⁻¹, respectively, but also excellent cycle longevity (98.3% capacitance retention after 5000 cycles) in 1 M H₂SO₄. In addition, the supercapacitor exhibits a high energy density of 10.6 W h kg⁻¹ when the power density is 224.8 W kg⁻¹ at a discharge current density of 0.5 A g⁻¹. This work proposes a sustainable strategy to reuse waste biomass in high-performance and green supercapacitors for advanced energy storage equipment.

P-doped porous carbon can be prepared by one-step carbonization using biomass sawdust impregnated with a small amount of phosphoric acid.