Rapid aerobic visible-light-driven photo-reduction of nitrobenzene

Geobacter sulfurreducens promoted the biosynthesis of reduced graphene oxide and coupled it for nitrobenzene reduction

In order to explore an efficient and green method to deal with nitrobenzene (NB) pollutant, reduced graphene oxide (rGO) as an electron shuttle was applied to enhance the extracellular electron transfer (EET) process of Geobacter sulfurreducens, which was a typical electrochemically active bacteria (EAB). In this study, rGO biosynthesis was achieved via the reduction of graphene oxide (GO) by G. sulfurreducens PCA within 3 days. Also, the rGO-PCA combining system completely reduced 50-200 µmol/L of NB to aniline as end product within one day. SEM characterization revealed that PCA cells were partly wrapped by rGO, and therefore the distance of electron transfer between strain PCA and rGO material was reduced. Beside, the ID/IG of GO, rGO, and rGO-PCA combining system were 0.990, 1.293 and 1.31, respectively. Moreover, highest currents were observed in rGO-PCA-NB as 12.950 µA/-12.560 µA at -408 mV/156 mV, attributing to the faster electron transfer efficiency in EET process. Therefore, the NB reduction was mainly due to: (I) direct EET process from G. sulfurreducens PCA to NB; (II) rGO served as electron shuttle and accelerated electron transfer to NB, which was the main degradation pathway. Overall, the biosynthesis of rGO via GO reduction by Geobacter promoted the NB removal process, which provided a facile strategy to alleviate the problematic nitroaromatic pollution in the environment.

Au Nanoparticles Supported by Porous Aromatic Frameworks—Efficient and Recyclable Catalysts for Nitro Reduction

A strategy has been developed for the preparation of gold nanoparticles (Au NPs) supported by porous aromatic frameworks (Au@PAF-184, Au@PAF-185) with high Au NPs loading, good stability and excellent activity. This approach contains two steps: the first step is ion exchange between cationic porous aromatic frameworks with NaAuCl4, fixing AuCl4− by the electrostatic interaction between anions and cations; the second step is reduction with NaBH4. Au@PAF-184 and Au@PAF-185 were successfully prepared accordingly. In comparison with the previously prepared similar types of materials such as Au@PAF-93 (2.86 wt% Au loading) and Au@PAF-94 (4.69 wt% Au loading) prepared by coordination and reduction, etc., the loading of Au NPs of Au@PAF-184 (24.2 wt% Au loading) and Au@PAF-185 (34.9 wt% Au loading) has increased by about 8 times. When employed as catalysts for nitrobenzene reduction, both Au@PAF-184 and Au@PAF-185 exhibited high catalytic activity and excellent reusability.

Designing a Polyoxometalate-Incorporated Metal-Organic Framework for Reduction of Nitroarenes to Anilines by Sequential Proton-Coupled Electron Transfers

Developing new photocatalysts for reduction of nitroarenes to anilines under mild conditions is very significant. Herein, a new polyoxometalate-based metal-organic framework (POMOF), {[Co(H₂O)]₂[Co₂(H₂O)₆(TPT)][Co(TPT)PW₁₁O₃₉]}·3H₂O·TPT (namely, CoW-TPT, TPT = 2,4,6-tri(4-pyridyl)-1,3,5-triazine), was prepared by incorporating Co(II)-substituted Keggin-type anions [PCoW₁₁O₃₉]^5- and a photosensitizer (TPT) into a framework. In this structure, the direct coordination bond between [PCoW₁₁O₃₉]^5- and TPT ligand and π···π interactions between TPT molecules are beneficial for the separation and migration of photogenerated carriers, thus improving the photocatalytic activity of CoW-TPT. The combination of both photosensitizer TPT and the electron-storable component [PCoW₁₁O₃₉]^5- in a cooperative photocatalysis fashion is conducive to the photocatalytic multielectron reduction of nitroarenes. CoW-TPT provided a high conversion of 94.71% in the photocatalytic reduction of nitroarenes to anilines utilizing triethanolamine as the proton source and electron donor by sequential proton-coupled electron transfers.

Heterogeneous UV-Switchable Au nanoparticles decorated tungstophosphoric acid/TiO2 for efficient photocatalytic degradation process

In the present study, gold nanoparticles were locally well-decorated on the surface of TiO₂ using the tungstophosphoric acid (HPW), as UV-switchable reducing intermediate linkers. The prepared Au NPs/HPW/TiO₂ nanostructure was characterized using FTIR, XRD, EDS, SEM and TEM, which confirmed the successful attachment of quasi-spherical Au NPs in the range of 20-30 nm on the surface of HPW modified TiO₂. Also, the FTIR results show that the Au NPs were binded to TiO₂ through the terminal the oxygen atoms HPW. The photocatalytic performance of prepared nanostructures was assessed in degradation of nitrobenzene. The nitrobenzene photodegradation kinetic study revealed that it well followed the Langmuir-Hinshelwood kinetic model with the apparent rate constant of 0.001 min^-1 using anatase TiO₂, 0.0004 min^-1 using HPW, 0.0014 using HPW/TiO₂, while it was obtained 0.0065 min^-1 using Au NPs@HPW/TiO₂ nanostructure. It shows that the photocatalytic rate of the prepared nanocomposites increased by 6.5- and 4.6-fold compared to photoactivity of anatase TiO₂ and HPW/TiO₂ respectively. Also, the photocatalytic mechanism of process was proposed. Moreover, the reusability study confirmed that its photocatalytic activity still remained high after three cycles.

An Efficient and Robust Method for Selective Conversion of Aniline to Azobenzene Using nano-TiO2 -P25-SO3 H, under Visible Light Irradiation

Nano-TiO₂ -P25-SO₃ H as our previous report has successfully been utilized to synthesize azobenzene through the selective conversion of aniline under visible light irradiation. According to PL emission spectra, the immobilizing a solid Brønsted acid of -SO₃ H groups on the pure-TiO₂ -P25 surface with a close interface is an approach to amplify the nano-TiO₂ -P25 response to visible light, which can productively hinder the recombination rate of photogenerated electrons and holes as carriers. Therefore, the photocatalytic activity of the semiconductor is highly likely to increase. Photooxidation of aniline to azobenzene was achieved by applying nano-TiO₂ -P25-SO₃ H (E_g  = 2.6 eV) that activated by blue photons (λ_max  = 460 nm), green photons (λ_max  = 510 nm) and red photons (λ_max  = 630 nm) which is introducing as a sustainable procedure. Central composite design (CCD) was employed for evaluating the effects of photocatalyst amount, oxidant concentration and irradiation time on the synthesis of azobenzene by this approach. Easily synthesizing, recyclability of the photocatalyst, mild reaction condition and short reaction time could be considered as plus points of this process.

Rice husk-SiO2 supported bimetallic Fe-Ni nanoparticles: as a new, powerful magnetic nanocomposite for the aqueous reduction of nitro compounds to amines

This paper reports a novel green procedure for immobilization of bimetallic Fe/Ni on amorphous silica nanoparticles extracted from rice husk (RH-SiO₂). The heterogeneous nanocomposite (Fe/Ni@RH-SiO₂) was identified using SEM, EDX, TEM, BET, H₂-TPR, TGA, XRD, VSM, ICP-OES, and FT-IR analyses. The Fe/Ni@RH-SiO₂ nanocomposite was applied as a powerful catalyst for the reduction of structurally diverse nitro compounds with sodium borohydride (NaBH₄) in green conditions. This procedure suggests some benefits such as green chemistry-based properties, short reaction times, non-explosive materials, easy to handle, fast separation and simple work-up method. The catalyst was separated by an external magnet from the reaction mixture and was reused for 9 successive cycles with no detectable changes of its catalytic efficiency.

This paper reports a novel green procedure for immobilization of bimetallic Fe/Ni on amorphous silica nanoparticles extracted from rice husk (RH-SiO₂).