Removal of thallium(I) from aqueous solutions using titanate nanomaterials: The performance and the influence of morphology

Recent Advances in Thallium Removal from Water Environment by Metal Oxide Material

Thallium is widely used in industrial and agricultural development. However, there is still a lack of systematic understanding of its environmental hazards and related treatment methods or technologies. Here, we critically assess the environmental behavior of thallium in aqueous systems. In addition, we first discuss the benefits and limitations of the synthetic methods of metal oxide materials that may affect the practicality and scalability of TI removal from water. We then assess the feasibility of different metal oxide materials for TI removal from water by estimating the material properties and contaminant removal mechanisms of four metal oxides (Mn, Fe, Al, and Ti). Next, we discuss the environmental factors that may inhibit the practicality and scalability of Tl removal from water. We conclude by highlighting the materials and processes that could serve as more sustainable alternatives to TI removal with further research and development.

Zwitterionic ammonium-sulfonato grafted cellulose for efficient thallium removal and adsorption mechanism study

Thallium (Tl) has posed serious impacts on human being concerning increasingly serious pollution in aqueous environments. However, little information on removal method than conventional heavy metals have been available. In the present work, zwitterionic N-(3-sulfonato-1-propyl)-N,N-dimethylammonium grafted cellulose fibre (DMAE-PS) has been fabricated. The chemical component, thermal stability and surface properties of as-prepared materials are identified by FT-IR, elemental analysis, TGA, XRD, BET and SEM. DMAE-PS is shown to be very efficient for removing Tl(I) from water samples with a loading capacity of 274.7 mg (Tl(I))·g^-1 (DMAE-PS)_, representing one of the best performances among bio-mass derived materials. The adsorption is consistent with the Freundlich model following a pseudo-second order (K₂ = 4.36 × 10^-4 g·mg^-1·min^-1, R² = 0.999) and two-step intra-particle diffusion kinetics. The selectivity towards Tl(I) is also remarkably, 1-2 orders (distribution ratio K_Tl/M = 14.85-289.29) of magnitude larger than competing metals (Zn²⁺, Cr³⁺, Mn²⁺, Cu²⁺ and Cd²⁺). The SEM, XPS and UV-visible spectrum collectively reveal that -SO₃^--Tl(I) ionic interaction is probably the main driving force for specific adsorption, which shows a high stability against pH variation. The fabricated DMAE-PS is a sustainable bio-adsorbent with synthetic availability, high removing capacity and strong selectivity, therefore, potentially feasible in treatment of Tl(I) polluted environmental samples.

Microbial diversity in paddy rhizospheric soils around a large industrial thallium-containing sulfide utilization zone

Thallium (Tl) is a rare and extremely toxic metal whose toxicity is significantly higher than cadmium (Cd), lead (Pb) and antimony (Sb). The extensive utilization of Tl-bearing minerals, such as mining activities, has led to severe Tl pollution in a variety of natural settings, while little is known to date about its effect on the microbial diversity in paddy soils. Also, the geochemical behavior of Tl in the periodical alterations between dry and wet conditions of paddy soils remains largely unknown. Herein, the sequential extraction method and 16S rRNA gene sequence analysis were adopted to analyze Tl's migration and transformation behavior and the microbial diversity in the paddy soils with different pollution levels. The results indicated that Tl was mainly concentrated in reducible fraction, which is different from other types of soils, and may be closely attributed to the abundance of Fe-Mn (hydr)oxides in the paddy rhizospheric soils. Further analysis revealed that pH, total S, Pb, Sb, Tl and Cd were the dominant environmental factors, and the enrichment level of these potentially toxic metal(loid)s (PTMs) exerted obvious impacts on the diversity and abundance of microorganism in the rhizospheric soils, and regulating microbial community. The geochemical fractionation of Tl was closely correlated to soil microorganisms such as Fe reducing bacteria (Geothrix) and sulfate reducing bacteria (Anaerolinea), playing a critical role in Tl geochemical cycle through redox reaction. Hence, further study on microorganisms of paddy rhizospheric soils is of great significance to the countermeasures for remediating Tl-polluted paddy fields and protect the health of residents.

Removal of Thallium from Aqueous Solutions by Adsorption onto Alumina Nanoparticles

Thallium (I) was removed from aqueous solution by using gamma-alumina nanoparticles (γANPs) materials as nano adsorbents. Varied experimental conditions such as adsorbent dose, agitation time, initial concentration, pH, and temperature effects were carried out in batch conditions in view of the optimization of thallium (I) adsorption and the identification of the adsorption mechanisms in the system γANPs-Tl. The pH effect indicated a remarkable increase in the quantity of Tl(I) removed for pH values ranging from 4 to 8, an almost constant magnitude for pH values between 8 and 10, and a decrease for pH values above 10. Considering an initial Tl(I) concentration of 20 µg/L and an adsorbent dose of 1 g/L at a pH value of 8.5, the removal was achieved at 95.12 ± 0.02% efficiency. The pseudo-second-order kinetics and the Freundlich isotherm perfectly described the adsorption mechanism. The process of thallium (I) adsorption reaction, as highlighted by thermodynamic investigations, was found to be spontaneous and exothermic with coexistence of physisorption and chemisorption with a dominance of physisorption. The diffusion model predicted multi-linearity, suggesting an involvement of surface spread and intraparticle diffusion in the sorption process. Thallium removal was effective by using γANPs as nano adsorbents.

Retention of thallium(I) on goethite, hematite, and manganite: Quantitative insights and mechanistic study

The reversibility of monovalent thallium (Tl) absorption on widely distributed iron/manganese secondary minerals may affect environmental Tl migration and global cycling. Nevertheless, quantitative and mechanistic studies on the interfacial retention and release reactions involving Tl(I) are limited. In this study, batch and stirred-flow experiments, unified kinetics modeling, spectral detection, and theoretical calculations were used to elucidate the retention behaviors of Tl(I) on goethite, hematite, and manganite with different solution pH values and Tl loading concentrations. Sustained Tl(I) retention (k_{d, MeOHTl}=0.005∼0.018 min^-1) was induced by hydration of the surface hydroxyl groups. Rapid Tl(I) retention (k_d,MeOTlOH=1.232∼2.917 min^-1) was enhanced by the abundant hydroxide ions and deprotonated hydroxyl groups, which increased the Tl(I) binding ability. Compared to the ambient Tl concentration, pH had a more substantial effect on the formation and distribution of surface Tl(I) binding species. In alkaline environments, the large adsorption energy for Tl(I) binding to surface species (E_ads=-6.14 eV) induced fast Tl(I) binding response on the surfaces of iron/manganese secondary minerals. This study provides new insights into the heterogeneous surface complexation and retention behaviors of Tl(I) and contributes to an in-depth understanding of the environmental fate of Tl and the remediation of Tl contamination.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Highly efficient removal of thallium(I) by facilely fabricated amorphous titanium dioxide from water and wastewater

In this study, amorphous hydrous titanium dioxide was synthesized by a facile precipitation method at room temperature, aiming to effectively remove thallium(I) from water. The titanium dioxide prepared using ammonia as precipitant (TiO2I) is more effective for thallium(I) uptake than the one synthesized with sodium hydroxide (TiO2II). The TiO2 obtained particles are amorphous, aggregates of many nanoparticles and irregular in shape. The thallium(I) uptake increases with the rise of solution pH value. Under neutral pH conditions, the maximal thallium(I) adsorption capacities of TiO2I and TiO2II are 302.6 and 230.3 mg/g, respectively, outperforming most of the reported adsorbents. The amorphous TiO2 has high selectivity towards thallium(I) in the presence of multiple cations such as K+, Ca2+, Mg2+, Zn2+ and Ni2+. Moreover, the TiO2I is efficient in removing thallium(I) from real river water and mining wastewater. Additionally, the spent TiO2I can be regenerated using hydrochloric acid solution and reused. The Tl(I) adsorption is achieved via replacing the H+ in hydroxyl group on the surface of TiO2 and forming inner-sphere surface complexes. Owing to its high efficiency, facile synthesis and environmental friendliness, the TiO2I has the potential to be used as an alternative adsorbent to remove Tl(I) from water.

Hydrothermally synthesized titanate nanomaterials for the removal of heavy metals and radionuclides from water: A review

Hazardous heavy metals and radionuclides in water and wastewater are of drastic concern owing to their detrimental impacts on the organisms as well as the circumambient ecosystem. To remove them as much as we can, both technique and materials were studied in the past years. The adsorption technique as superior water remediation method with the simplicity of design, environmental friendliness and high efficiency was well established. Consequently, it is practically important to explore advanced and economically feasible absorbents for removing these poisonous pollutants from aqueous solutions. So far, large numbers of experiments proved hydrothermally synthesized titanate nanomaterials (TNMs) could be a prospectively excellent adsorbent extracting heavy metals and radionuclides from water due to the high specific surface area, tunable pore size, abundant surface active sites, favorable hydrophilic properties. The objective of this work is to give an overview of hydrothermal synthesis, adsorption performance of TNMs for heavy metals and radionuclides, as well as the various influencing factors for water purification. It comprehensively reviews the structural changes and regenerability of TNMs after adsorption, and different modification methods adopted for improving removal capacity. Additionally, it uniquely highlights the efficient decontamination of the pollutants through a synergistic effect of adsorption and photocatalysis by TNMs. This review provides detailed information for the development, application, and research challenges faced by hydrothermally synthesized TNMs for the removal of heavy metals and radionuclides from aqueous solutions, which will serve as a reference guide for scientists in related fields.

One-step synthesis of cake-like biosorbents from plant biomass for the effective removal and recovery heavy metals: Effect of plant species and roles of xanthation

The continuous production of plant wastes and heavy metal pollution of waters have become widespread unavoidable challenges. Reutilization of plant wastes to treat toxic metal-contaminated water is an eco-friendly way to simultaneously solve these problems. Herein, three cake-like biosorbents were synthesized from tea waste, trimmed lawn grass and Nephrolepis cordifolia leaves through a one-step xanthation modification method combined with lyophilization, respectively. The plant species affected the appearance, structure and mechanical strength of the biosorbents due to the different contents of hydrocarbons and inorganic substances, which influenced the gel-like degree and thus the ability of the particles to pack between water molecules. The maximum adsorption capacities of the modified materials for Pb(II), Cu(II) and Cd(II) were 247.20, 85.80 and 265.31 mg/g, respectively, far higher than those of the original wastes, and the adsorption was selective. These results were mainly attributed to newly introduced -(CS)-S-Na groups, which triggered ion exchange, complexation and microprecipitation between heavy metal ions and functional groups. As-prepared biosorbents owned an excellent regenerability, which contributed to recovery heavy metals. The physicochemical properties and adsorption performances of the modified materials indicated that xanthation is a universal modification method suited to different plant biomasses with great potential to purify heavy metal-contaminated water. These biosorbents with excellent separability and regenerability might be promising for continuous-flow sewage treatment.

Efficient extraction of antimony(III) by titanate nanosheets: Study on adsorption behavior and mechanism

Antimony has been listed as a critical pollutant in many countries because of its toxic effects on earth organisms. In this study, titanate nanosheets (TNS) were prepared with a high specific surface area by alkaline hydrothermal method. The adsorption mechanism and adsorption capacity of removing Sb(III) from aqueous solutions with TNS as an adsorbent were investigated for the first time. The FTIR and XPS analysis indicated that the interlayer sodium ions of TNS were responsible for Sb(III) adsorption. The batch experiments were conducted on solution pH, adsorbent dosage, initial concentration and reaction time. The results exhibited that when pH was 2, the removal rate was about 90% with the dosage of TNS was 0.1 g/L. The adsorption reaction was exceedingly rapid in the initial 5 min, and then the reaction was in equilibrium after about 30 min. The experimental data were better fitted with Langmuir isotherm model, and the maximum adsorption amount could attain 232.56 mg/g. The experiments showed that TNS had outstanding anti-interference performance to common cations. Therefore, TNS were considered to be an excellent material for removing Sb(III) from aqueous solutions.

Extensive removal of thallium by graphene oxide functionalized with aza-crown ether

Thallium (Tl) is a highly toxic heavy metal, and its pollution and remediation in aquatic environments has attracted considerable attention. To reduce or remove Tl pollution in the environment, various strategies have been applied. Graphene oxide (GO) has abundant oxygen-containing functional groups, indicating its high application potential for pollution remediation via methods involving binding to metal ions or positively charged organic molecules or electrostatic interaction and coordination. However, the adsorption of Tl to GO occurs via physical adsorption, for which the adsorption efficiency is low. Therefore, herein, we report a new method to effectively remove Tl pollution in water. We combined GO with aza-crown ether, which enhanced the electronegativity and ability to bind metal ions. The functionalized graphene oxide (FGO) demonstrated high efficiency through a wide pH gradient of 5-10, with a dominant Tl(i) adsorption capacity (112.21 mg g-1) based on the Langmuir model (pH 9.0, adsorbent concentration of 0.8 g L-1). The adsorption of Tl(i) during removal fit a pseudo-second-order kinetic model well. The mechanisms of Tl removal involve physical and chemical adsorption. In summary, our study provides a new method for the detection and treatment of Tl-containing wastewater by using FGO.

Fabrication and characterization of magnetically responsive Fe3O4@TiO2 core-shell adsorbent for enhanced thallium removal

Thallium (Tl) contamination in natural waters can pose a severe risk to human health. In this study, a magnetically responsive Fe₃O₄@TiO₂ core-shell adsorbent was developed for the effective removal of thallium(I) from water. The isoelectric point of the adsorbent surface was decreased from 6.0 to 4.8 due to the loading of nano-sized TiO₂, leading to an enhanced electrostatic interaction between the adsorbent and Tl(I) ions in a wider pH range. The Fe₃O₄@TiO₂ magnetic adsorbent exhibited a threefold higher BET specific surface area compared to pristine Fe₃O₄ particles. The kinetics study showed that approximately 82% of the maximum Tl(I) loading amount could be achieved within 30 min at the initial Tl(I) concentration of 8 mg/L and adsorbent dosage of 0.1 g/L. The adsorption of Tl(I) was significantly increased with increasing solution pH. The experimental data was better fitted by the Langmuir and Temkin isotherms than the Freundlich isotherm and the maximum adsorption capacity of the magnetic adsorbent was 101.5 mg/g at pH 7.0. The interference of co-existing cations in the Tl(I) adsorption followed the subsequence: Cu²⁺ > Mg²⁺ > Ca²⁺ > Na⁺. The hydroxyl groups bonded on titanium atoms might play a key role in the uptake of Tl(I) ions. During the adsorption, the Tl(I) ions can be effectively adsorbed on the adsorbent surface via the formation of Ti-O-Tl linkages. Graphical Abstract.