Validation of large-volume batch solar reactors for the treatment of rainwater in field trials in sub-Saharan Africa

SODIS with hydrogen peroxide: an effective household water treatment option under sub-tropical climatic conditions of bangladesh

Solar disinfection (SODIS) is an affordable and sustainable Household Water Treatment (HWT) method endorsed by WHO. However, its limitations include longer sunlight exposure requirements, incomplete microbial inactivation, and post-SODIS microbial regrowth during monsoon and winter seasons in subtropical climates. To address these limitations, the performance of SODIS with H2O2 for microbial inactivation during the monsoon and winter seasons in Bangladesh was evaluated following the WHO HWT protocols. Moreover, the process was verified using drinking water samples collected from restaurants, households, and slums. All SODIS experiments were conducted using reflective reactors with PET bottles and plastic bags, adding 10 mg/L of H2O2, and exposing them to sunlight for 6 h. The results showed that E. coli was completely inactivated within 2 h in plastic bags and within 3 h in PET bottles during the monsoon season, achieving an LRV of > 5. In winter, both achieved an LRV > 5 within 3 h and plastic bags showed more efficient in microbial inactivation than PET bottles. The microbial inactivation rates were 5 times higher than those of conventional SODIS. No regrowth of microorganisms was observed during the subsequent post-SODIS period of 12 h and 24 h at room temperature. The study findings suggest that SODIS with H2O2 has the potential for complete microorganism inactivation with shorter sunlight exposure in subtropical climates with moderate to low solar irradiation and can be adopted as a reliable disinfection option for rural and urban communities with unsafe drinking water supply.

Advancing rainwater treatment technologies for irrigation of urban agriculture: A pathway toward innovation

Urban agriculture (UA) has emerged for local food security since the 1960s. However, the access to sufficient and safe irrigation water remains a significant constraint. Municipal water supply, though commonly used in UA practices, proves unsustainable due to high costs, intensive energy consumption, and limited availability in many vacant urban spaces. In contrast, rainwater harvesting (RWH) exhibits a potential as a non-traditional water supply for urban farming. This article aims to provide insights into the advantages and challenges associated with RWH for UA irrigation, analyze existing low-cost RWH treatment technologies, and identify a visionary way toward innovative, new-generation RWH treatment processes in UA practices. Despite a promising water source, harvested rainwater is challenged for crop irrigation owing to the presence of various contaminants (e.g., waterborne pathogens, potentially toxic metals and metalloids, and synthetic organic chemicals). While established RWH treatment processes (e.g., first flush diversion, sedimentation, solar disinfection, chlorination, UV irradiation, granular filtration, and bio-sand filtration) can remove certain pollutants, they cannot offer viable treatment solutions for UA irrigation due to different technical, economic, and social restrictions. Particularly, their capacity to reliably remove contaminants of emerging concern in runoff remains limited or uncertain. Consequently, it is essential to develop next-generation RWH treatment technologies tailored specifically for UA irrigation. To this end, three fundamental principles are recommended. First, the focus should be on technically viable, low-cost, simple-operation, and easy-maintenance treatment technologies capable of simultaneously addressing traditional and emerging runoff contaminants, while minimizing the production of undesirable treatment byproducts. Second, advancing the understanding of the water, soil, and crop interactions enables the development of "right" RWH treatment processes for irrigation of "right" crops at a "right" place. Last, crop nutrients, if possible, are retained in rainwater to reduce the nutrient demand for crop production. The insights and perspectives have far-reaching implications for water conservation, stormwater management, and the integration of water, food, and energy systems within the urban environment.

A Low Cost and Eco-Sustainable Device to Determine the End of the Disinfection Process in SODIS

The lack of safe drinking water is one of the main health problems in many regions of the world. In order to face it, Solar water disinfection (SODIS) proposes the use of transparent plastic containers, which are filled with contaminated water, and exposed to direct sunlight until enough UV radiation is received to inactivate the pathogens. However, a reliable method for determining the end of the disinfection process is needed. Although several approaches have been proposed in the literature for this purpose, they do not strictly accomplish two critical constraints that are essential in this type of project, namely, low cost and sustainability. In this paper, we propose an electronic device to determine when the lethal UV dose has been reached in SODIS containers, which accomplishes both constraints mentioned above: on the one hand, its manufacturing cost is around EUR 12, which is much lower than the price of other electronic solutions; on the other hand, the device is sufficiently autonomous to work for months with small low-cost disposable batteries, thereby avoiding the use of rechargeable batteries, which are considered hazardous waste at the end of their useful life. In our approach, we first analyze different low cost UV sensors in order to select the most accurate one by comparing their response with a reference pattern provided by a radiometer. Then, an electronic device is designed using this sensor, which measures the accumulated UV radiation and compares this value with the lethal UV dose to determine the end of the disinfection process. Finally, the device has been manufactured and tested in real conditions to analyze its accuracy, obtaining satisfactory results.

Epidemiological and Immunological Gains from Solar Water Disinfection (SODIS): Fact or Wishful Thinking?

OBJECTIVE

There is still no consensus on the impact of using solar disinfection (SODIS) to reduce the prevalence of waterborne gastrointestinal diseases. The reported reduction in diarrhea prevalence among SODIS users has been attributed to the consumption of water free of viable pathogens. However, it has also been suggested that ingestion of SODIS-inactivated pathogens may induce protective immunological changes that may also contribute to a reduction in the frequency of diarrhea. The present study aimed to critically review the epidemiological and immunological gains of using SODIS.

METHODS

We critically reviewed 22 articles published in English, selected from 2,118 records systematically retrieved from the databases.

RESULTS

All trials (except one) reported a significant reduction in diarrhea prevalence among children using SODIS, but some of the data from trials report contrary findings. All in vitro and in vivo assays indicate that SODIS-inactivated pathogenic bacteria have the potential to induce immunological alterations that may result in protective immunological effects. Studies with a low risk of bias are still awaited to confirm the ability of using SODIS to reduce the prevalence of diarrhea.

CONCLUSION

Reducing the prevalence of diarrhea depends on the success of SODIS delivery strategies in inducing behavioral changes in communities that result in the production of SODIS-compliant outcomes. The results of trials reporting a reduction in the prevalence of diarrhea due to the use of SODIS seem to support the hypothesis of the contribution of the protective immunological effect against diarrhea in SODIS users.

Evaluation of an alternative household water treatment system based on slow filtration and solar disinfection

Drinking water consumption is essential to maintain a good quality of life, but it is not available for all communities. Therefore, this work aimed to develop an alternative and accessible process for water treatment, based on filtration and solar disinfection, and evaluate it in both bench and pilot scales. The construction cost of the system was estimated and compared with other available options so that its economic viability could be discussed. For this purpose, water from a stream was collected and analyzed. A filter made of PVC tubes, sand, and gravel was built, acting, respectively, as a column, filtering medium, and support layer. As for the disinfection process, the SODIS (Solar Water Disinfection) methodology was adopted. The water was exposed to the sun, and the best exposure time was determined based on the analysis of total coliforms and E. coli. Finally, a prototype was built for a flow rate of 37.5 L d^-1, consisting of two filters operating at a filtration rate of 2.38 m³ m^-2 d^-1. About 97% turbidity removal was obtained, as well as 99.9% for total coliforms and 99.1% for E. coli. It is estimated that the cost of building a water treatment system for one person is approximately USD 29.00.

Worldwide Research Trends on Solar-Driven Water Disinfection

“Ensure access to water for all”, states Goal 6 of the UN’s Sustainable Development Goals. This worldwide challenge requires identifying the best water disinfection method for each scenario. Traditional methods have limitations, which include low effectiveness towards certain pathogens and the formation of disinfection byproducts. Solar-driven methods, such as solar water disinfection (SODIS) or solar photocatalysis, are novel, effective, and financially and environmentally sustainable alternatives. We have conducted a critical study of publications in the field of water disinfection using solar energy and, hereby, present the first bibliometric analysis of scientific literature from Elsevier’s Scopus database within the last 20 years. Results show that in this area of growing interest USA, Spain, and China are the most productive countries in terms of publishing, yet Europe hosts the most highly recognized research groups, i.e., Spain, Switzerland, Ireland, and UK. We have also reviewed the journals in which researchers mostly publish and, using a systematic approach to determine the actual research trends and gaps, we have analyzed the capacity of these publications to answer key research questions, pinpointing six clusters of keywords in relation to the main research challenges, open areas, and new applications that lie ahead. Most publications focused on SODIS and photocatalytic nanomaterials, while a limited number focused on ensuring adequate water disinfection levels, testing regulated microbial indicators and emerging pathogens, and real-world applications, which include complex matrices, large scale processes, and exhaustive cost evaluation.

Solar Water Disinfection to Produce Safe Drinking Water: A Review of Parameters, Enhancements, and Modelling Approaches to Make SODIS Faster and Safer

Solar water disinfection (SODIS) is one the cheapest and most suitable treatments to produce safe drinking water at the household level in resource-poor settings. This review introduces the main parameters that influence the SODIS process and how new enhancements and modelling approaches can overcome some of the current drawbacks that limit its widespread adoption. Increasing the container volume can decrease the recontamination risk caused by handling several 2 L bottles. Using container materials other than polyethylene terephthalate (PET) significantly increases the efficiency of inactivation of viruses and protozoa. In addition, an overestimation of the solar exposure time is usually recommended since the process success is often influenced by many factors beyond the control of the SODIS-user. The development of accurate kinetic models is crucial for ensuring the production of safe drinking water. This work attempts to review the relevant knowledge about the impact of the SODIS variables and the techniques used to develop kinetic models described in the literature. In addition to the type and concentration of pathogens in the untreated water, an ideal kinetic model should consider all critical factors affecting the efficiency of the process, such as intensity, spectral distribution of the solar radiation, container-wall transmission spectra, ageing of the SODIS reactor material, and chemical composition of the water, since the substances in the water can play a critical role as radiation attenuators and/or sensitisers triggering the inactivation process.

Photovoltaic and solar disinfection technology meeting the needs of water and electricity of a typical household in developing countries: From a Solar Home System to a full-functional hybrid system

A novel SolWat system designed exclusively as a Solar Home System that also meets the drinking water access in a family of a rural community in a developing country has been designed, manufactured and tested outdoors. The system is composed of 5 photovoltaic modules of monocrystalline silicon solar cells technology, each 20 Wp, parallel-interconnected, adding up to a 100 Wp system. The modules have a water reactor on top with the capacity of providing a minimum of 37.5 L per day for a family of 5 members, guaranteeing the minimum daily needs. Experimental campaign run tests of SODIS of 3 h each, running the system 3 times per day (with a total of 9 h of experimentation per day). Results show that the water treatment of 3 h should be increased at certain periods of the day when the UV dose is not sufficient (late in the afternoon). E. coli and Enterococcus spp achieved total inactivation or almost total disinfection. Regarding electrical production, although energy losses of 5.6-10% were observed in comparison with a single PV module, it was sufficient to fully meet the load demand of the solar home system. The system could be used in a household of a developing country, using only solar energy to meet the electricity and drinking water demand.

EMA-amplicon-based sequencing informs risk assessment analysis of water treatment systems

Illumina amplicon-based sequencing was coupled with ethidium monoazide bromide (EMA) pre-treatment to monitor the total viable bacterial community and subsequently identify and prioritise the target organisms for the health risk assessment of the untreated rainwater and rainwater treated using large-volume batch solar reactor prototypes installed in an informal settlement and rural farming community. Taxonomic assignments indicated that Legionella and Pseudomonas were the most frequently detected genera containing opportunistic bacterial pathogens in the untreated and treated rainwater at both sites. Additionally, Mycobacterium, Clostridium sensu stricto and Escherichia/Shigella displayed high (≥80%) detection frequencies in the untreated and/or treated rainwater samples at one or both sites. Numerous exposure scenarios (e.g. drinking, cleaning) were subsequently investigated and the health risk of using untreated and solar reactor treated rainwater in developing countries was quantified based on the presence of L. pneumophila, P. aeruginosa and E. coli. The solar reactor prototypes were able to reduce the health risk associated with E. coli and P. aeruginosa to below the 1 × 10^-4 annual benchmark limit for all the non-potable uses of rainwater within the target communities (exception of showering for E. coli). However, the risk associated with intentional drinking of untreated or treated rainwater exceeded the benchmark limit (E. coli and P. aeruginosa). Additionally, while the solar reactor treatment reduced the risk associated with garden hosing and showering based on the presence of L. pneumophila, the risk estimates for both activities still exceeded the annual benchmark limit. The large-volume batch solar reactor prototypes were thus able to reduce the risk posed by the target bacteria for non-potable activities rainwater is commonly used for in water scarce regions of sub-Saharan Africa. This study highlights the need to assess water treatment systems in field trials using QMRA.

Material selection and prediction of solar irradiance in plastic devices for application of solar water disinfection (SODIS) to inactivate viruses, bacteria and protozoa

Solar water disinfection (SODIS) is a simple, inexpensive and sustainable Household Water Treatment (HWT) that is appropriate for low-income countries or emergency situations. Usually, SODIS involves solar exposure of water contained in transparent polyethylene terephthalate (PET) bottles for a minimum of 6 h. Sunlight, especially UVB radiation, has been demonstrated to photoinactivate bacteria, viruses and protozoa. In this work, an in-depth study of the optical and mechanical properties, weathering and production prices of polymeric materials has been carried out to identify potential candidate materials for manufacturing SODIS devices. Three materials were ruled out (polystyrene (PS), polyvinyl chloride (PVC) and polyethylene (PE)) and four materials were initially selected for study: polymethylmethacrylate (PMMA), polypropylene (PP), polycarbonate (PC) and polyethylene terephthalate (PET). These plastics transmit sufficient solar radiation to kill waterborne pathogens with production costs compensated by their durability under solar exposure. A predictive model has been developed to quantitatively estimate the radiation available for SODIS inside the device as a function of the material and thickness. This tool has two applications: to evaluate design parameters such as thickness, and to estimate experimental requirements such as solar exposure time. In this work, this model evaluated scenarios involving different plastic materials, device thicknesses, and pathogens (Escherichia coli bacterium, MS2 virus and Cryptosporidium parvum protozoon). The developed Solar UV Calculator model is freely available and can be also applied to other customized materials and conditions.