Recent progresses in analytical GC and LC mass spectrometric based-methods for the detection of emerging chlorinated and brominated contaminants and their transformation products in aquatic environment

Global performance and trends of research on emerging contaminants in sewage sludge: A Bibliometric Analysis from 1990 to 2023

The pervasive occurrence of emerging contaminants (ECs) in sewage sludge (SWS) poses significant safety challenges concerning the processing, disposal, and secure application, ultimately jeopardizing both human health and the ecological environment. To comprehensively comprehend the evolutionary trajectories, present state, and research advancements in the field of ECs in SWS, a systematic was conducted, scrutinizing the annual publication quantity, disciplinary distribution, core authors, involved nations/regions, pertinent keywords, and citation status of 2082 research publications related to ECs in SWS from 1990 to 2023. The results indicate a substantial upward trajectory in the research literature pertaining to ECs in SWS. The study of ECs in SWS encompasses 78 disciplines, including Environmental Sciences, Environmental Engineering, and Water Resources. China, Spain, and the USA ranked among the top three countries in terms of both total publications and citation frequency. The majority of publications were published in reputable high-impact journals such as Science of the Total Environment, Chemosphere, and Bioresource Technology. Based on high-frequency keywords, co-occurrence networks of keywords, and keywords burst analysis, it is found that the occurrence and environment behavior of ECs in SWS (ARGs, microplastics, PPCPs, and POPs), the detection and analytical methods, the impact on SWS treatment and disposal processes, and the accumulation and ecological risks in plants and soil during SWS land utilization, are the main research directions and hot topics in this field. In the future, the study of the impact of SWS treatment technologies on ECs removal is expected to receive increased research attention.

Unearthing Earth's secrets: Exploring the environmental legacy of contaminants in soil, water, and sediments

The Earth's history is documented in human civilizations, soil layers, river movement, and quiet sediments throughout millennia. This investigation explores the significant legacy of environmental toxins in these key planet components. Understanding how ancient activity shaped the terrain is crucial as mankind faces environmental issues. This interdisciplinary study uses environmental science, archaeology, and geology to uncover Earth's mysteries. It illuminates the dynamic processes that have built our globe by studying pollutants and soil, water, and sediments. This research follows human actions, both intentional and unintentional, from ancient civilizations through contemporary industrialization and their far-reaching effects. Environmental destiny examines how contaminants affect ecosystems and human health. This study of past contamination helps solve modern problems including pollution cleanup, sustainable land management, and water conservation. This review studies reminds us that our previous activities still affect the ecosystem in a society facing rapid urbanisation and industrialization. It emphasises the importance of environmental stewardship and provides a framework for making educated choices to reduce toxins in soil, water, and sediments. Discovery of Earth's secrets is not only a historical curiosity; it's a necessary step towards a sustainable and peaceful cohabitation with our home planet.

Update of the risk assessment of polybrominated diphenyl ethers (PBDEs) in food

The European Commission asked EFSA to update its 2011 risk assessment on polybrominated diphenyl ethers (PBDEs) in food, focusing on 10 congeners: BDE-28, -47, -49, -99, -100, -138, -153, -154, -183 and ‑209. The CONTAM Panel concluded that the neurodevelopmental effects on behaviour and reproductive/developmental effects are the critical effects in rodent studies. For four congeners (BDE-47, -99, -153, -209) the Panel derived Reference Points, i.e. benchmark doses and corresponding lower 95% confidence limits (BMDLs), for endpoint-specific benchmark responses. Since repeated exposure to PBDEs results in accumulation of these chemicals in the body, the Panel estimated the body burden at the BMDL in rodents, and the chronic intake that would lead to the same body burden in humans. For the remaining six congeners no studies were available to identify Reference Points. The Panel concluded that there is scientific basis for inclusion of all 10 congeners in a common assessment group and performed a combined risk assessment. The Panel concluded that the combined margin of exposure (MOET) approach was the most appropriate risk metric and applied a tiered approach to the risk characterisation. Over 84,000 analytical results for the 10 congeners in food were used to estimate the exposure across dietary surveys and age groups of the European population. The most important contributors to the chronic dietary Lower Bound exposure to PBDEs were meat and meat products and fish and seafood. Taking into account the uncertainties affecting the assessment, the Panel concluded that it is likely that current dietary exposure to PBDEs in the European population raises a health concern.

What is in the fish? Collaborative trial in suspect and non-target screening of organic micropollutants using LC- and GC-HRMS

A collaborative trial involving 16 participants from nine European countries was conducted within the NORMAN network in efforts to harmonise suspect and non-target screening of environmental contaminants in whole fish samples of bream (Abramis brama). Participants were provided with freeze-dried, homogenised fish samples from a contaminated and a reference site, extracts (spiked and non-spiked) and reference sample preparation protocols for liquid chromatography (LC) and gas chromatography (GC) coupled to high resolution mass spectrometry (HRMS). Participants extracted fish samples using their in-house sample preparation method and/or the protocol provided. Participants correctly identified 9-69 % of spiked compounds using LC-HRMS and 20-60 % of spiked compounds using GC-HRMS. From the contaminated site, suspect screening with participants' own suspect lists led to putative identification of on average ∼145 and ∼20 unique features per participant using LC-HRMS and GC-HRMS, respectively, while non-target screening identified on average ∼42 and ∼56 unique features per participant using LC-HRMS and GC-HRMS, respectively. Within the same sub-group of sample preparation method, only a few features were identified by at least two participants in suspect screening (16 features using LC-HRMS, 0 features using GC-HRMS) and non-target screening (0 features using LC-HRMS, 2 features using GC-HRMS). The compounds identified had log octanol/water partition coefficient (KOW) values from -9.9 to 16 and mass-to-charge ratios (m/z) of 68 to 761 (LC-HRMS and GC-HRMS). A significant linear trend was found between log KOW and m/z for the GC-HRMS data. Overall, these findings indicate that differences in screening results are mainly due to the data analysis workflows used by different participants. Further work is needed to harmonise the results obtained when applying suspect and non-target screening approaches to environmental biota samples.

Advanced electrocatalytic redox processes for environmental remediation of halogenated organic water pollutants

Halogenated organic compounds are widespread, and decades of heavy use have resulted in global bioaccumulation and contamination of the environment, including water sources. Here, we introduce the most common halogenated organic water pollutants, their classification by type of halogen (fluorine, chlorine, or bromine), important policies and regulations, main applications, and environmental and human health risks. Remediation techniques are outlined with particular emphasis on carbon-halogen bond strengths. Aqueous advanced redox processes are discussed, highlighting mechanistic details, including electrochemical oxidations and reductions of the water-oxygen system, and thermodynamic potentials, protonation states, and lifetimes of radicals and reactive oxygen species in aqueous electrolytes at different pH conditions. The state of the art of aqueous advanced redox processes for brominated, chlorinated, and fluorinated organic compounds is presented, along with reported mechanisms for aqueous destruction of select PFAS (per- and polyfluoroalkyl substances). Future research directions for aqueous electrocatalytic destruction of organohalogens are identified, emphasizing the crucial need for developing a quantitative mechanistic understanding of degradation pathways, the improvement of analytical detection methods for organohalogens and transient species during advanced redox processes, and the development of new catalysts and processes that are globally scalable.

Critical Assessment of the Chemical Space Covered by LC-HRMS Non-Targeted Analysis

Non-targeted analysis (NTA) has emerged as a valuable approach for the comprehensive monitoring of chemicals of emerging concern (CECs) in the exposome. The NTA approach can theoretically identify compounds with diverse physicochemical properties and sources. Even though they are generic and have a wide scope, non-targeted analysis methods have been shown to have limitations in terms of their coverage of the chemical space, as the number of identified chemicals in each sample is very low (e.g., ≤5%). Investigating the chemical space that is covered by each NTA assay is crucial for understanding the limitations and challenges associated with the workflow, from the experimental methods to the data acquisition and data processing techniques. In this review, we examined recent NTA studies published between 2017 and 2023 that employed liquid chromatography-high-resolution mass spectrometry. The parameters used in each study were documented, and the reported chemicals at confidence levels 1 and 2 were retrieved. The chosen experimental setups and the quality of the reporting were critically evaluated and discussed. Our findings reveal that only around 2% of the estimated chemical space was covered by the NTA studies investigated for this review. Little to no trend was found between the experimental setup and the observed coverage due to the generic and wide scope of the NTA studies. The limited coverage of the chemical space by the reviewed NTA studies highlights the necessity for a more comprehensive approach in the experimental and data processing setups in order to enable the exploration of a broader range of chemical space, with the ultimate goal of protecting human and environmental health. Recommendations for further exploring a wider range of the chemical space are given.

Guidance document on the impact of water treatment processes on residues of active substances or their metabolites in water abstracted for the production of drinking water

This guidance document provides a tiered framework for risk assessors and facilitates risk managers in making decisions concerning the approval of active substances (AS) that are chemicals in plant protection products (PPPs) and biocidal products, and authorisation of the products. Based on the approaches presented in this document, a conclusion can be drawn on the impact of water treatment processes on residues of the AS or its metabolites in surface water and/or groundwater abstracted for the production of drinking water, i.e. the formation of transformation products (TPs). This guidance enables the identification of actual public health concerns from exposure to harmful compounds generated during the processing of water for the production of drinking water, and it focuses on water treatment methods commonly used in the European Union (EU). The tiered framework determines whether residues from PPP use or residues from biocidal product use can be present in water at water abstraction locations. Approaches, including experimental methods, are described that can be used to assess whether harmful TPs may form during water treatment and, if so, how to assess the impact of exposure to these water treatment TPs (tTPs) and other residues including environmental TPs (eTPs) on human and domesticated animal health through the consumption of TPs via drinking water. The types of studies or information that would be required are described while avoiding vertebrate testing as much as possible. The framework integrates the use of weight-of-evidence and, when possible alternative (new approach) methods to avoid as far as possible the need for additional testing.

Analysis of environmental pollutants using ion chromatography coupled with mass spectrometry: A review

The rise of emerging pollutants in the current environment and requirements of trace analysis in complex substrates pose challenges to modern analytical techniques. Ion chromatography coupled with mass spectrometry (IC-MS) is the preferred tool for analyzing emerging pollutants due to its excellent separation ability for polar and ionic compounds with small molecular weight and high detection sensitivity and selectivity. This paper reviews the progress of sample preparation and ion-exchange IC-MS methods in the analysis of several major categories of environmental polar and ionic pollutants including perchlorate, inorganic and organic phosphorus compounds, metalloids and heavy metals, polar pesticides, and disinfection by-products in past two decades. The comparison of various methods to reduce the influence of matrix effect and improve the accuracy and sensitivity of analysis are emphasized throughout the process from sample preparation to instrumental analysis. Furthermore, the human health risks of these pollutants in the environment with natural concentration levels in different environmental medias are also briefly discussed to raise public attention. Finally, the future challenges of IC-MS for analysis of environmental pollutants are briefly discussed.

Temporal Trends and Suspect Screening of Halogenated Flame Retardants and Their Metabolites in Blubbers of Cetaceans Stranded in Hong Kong Waters during 2013-2020

Halogenated flame retardants (HFRs) are a large class of chemical additives intended to meet flammability safety requirements, and at present, they are ubiquitous in the environment. Herein, we conducted the target analysis and suspect screening of legacy and novel HFRs and their metabolites in the blubber of finless porpoises (Neophocaena phocaenoides; n = 70) and Indo-Pacific humpback dolphins (Sousa chinensis; n = 35) stranded in Hong Kong, a coastal city in the South China Sea, between 2013 and 2020. The average concentrations of total target HFRs (ΣHFRs) were 6.48 × 10³ ± 1.01 × 10⁴ and 1.40 × 10⁴ ± 1.51 × 10⁴ ng/g lipid weight in porpoises and dolphins, respectively. Significant decreasing temporal trends were observed in the concentrations of tetra-/penta-/hexa-bromodiphenyl ethers (tetra-/penta-/hexa-BDEs) in adult porpoises stranded from 2013-2015 to 2016-2020 (p < 0.05), probably because of their phasing out in China. No significant difference was found for the concentrations of decabromodiphenyl ether and hexabromocyclododecane, possibly due to their exemption from the ban in China until 2025 and 2021, respectively. Eight brominated compounds were additionally identified via suspect screening. A positive correlation was found between the concentrations of tetra-BDE and methyl-methoxy-tetra-BDE (Me-MeO-tetra-BDE) (p < 0.05), indicating that the metabolism of tetra-BDE may be a potential source of Me-MeO-tetra-BDE in marine mammals.

Evaluating the spatial and temporal distribution of emerging contaminants in the Pearl River Basin for regulating purposes

Little information is available on how the types, concentrations, and distribution of chemicals have evolved over the years. The objective of the present study is therefore to review the spatial and temporal distribution profile of emerging contaminants with limited toxicology data in the pearl river basin over the years to build up the emerging contaminants database in this region for risk assessment and regulatory purposes. The result revealed that seven groups of emerging contaminants were abundant in this region, and many emerging contaminants had been detected at much higher concentrations before 2011. Specifically, antibiotics, phenolic compounds, and acidic pharmaceuticals were the most abundant emerging contaminants detected in the aquatic compartment, while phenolic compounds were of the most profound concern in soil. Flame retardants and plastics were the most frequently studied chemicals in organisms. The abundance of the field concentrations and frequencies varied considerably over the years, and currently available data can hardly be used for regulation purposes. It is suggested that watershed management should establish a regular monitoring scheme and comprehensive database to monitor the distribution of emerging contaminants considering the highly condensed population in this region. The priority monitoring list should be formed in consideration of historical abundance, potential toxic effects of emerging contaminants as well as the distribution of heavily polluting industries in the region.

Thin-layer chromatography coupled with HPLC-DAD/UHPLC-HRMS for target and non-target determination of emerging halogenated organic contaminants in animal-derived foods

In this study, a simple, solvent-saving, and sensitive method was established using high-performance liquid chromatography coupled with high-resolution mass spectrometry to quantitively determine 16 emerging halogenated organic contaminants (HOCs), including polyhalogenated carbazoles, halogenated phenols, and tetrabromobisphenol-A analogs, and to qualitatively identify non-target HOCs in animal-derived food samples. The sample extracts were physically frozen to remove most lipids and further purified by thin-layer chromatography according to the targets polarity. The method detection limit and method quantification limit of 16 HOCs were in the range of 0.003-9.168 and 0.010-30.601 ng·g-1 dry weight, respectively. The recoveries were within 69.1-111.0 %, the intra/inter-day precisions were 0.1-6.1 % and 0.1-6.7 %, and the matrix effects were between -12.1 and 10.8 %, all within the acceptable range. Finally, 16 HOCs were detected in nine actual samples in range of not detected-307.22 ng·g-1 dry weight. Moreover, five bromides and two chlorides were identified by using non-target analysis in animal-derived foods.

Environmental occurrence, toxicity and remediation of perchlorate - A review

Perchlorate (ClO4-) comes under the class of contaminants called the emerging contaminants that will impact environment in the near future. A strong oxidizer by nature, perchlorate has received significant observation due to its occurrence, reactive nature, and persistence in varied environments such as surface water, groundwater, soil, and food. Perchlorate finds its use in number of industrial products ranging from missile fuel, fertilizers, and fireworks. Perchlorate exposure occurs when naturally occurring or manmade perchlorate in water or food is ingested. Perchlorate ingestion affects iodide absorption into the thyroid, thereby causing a decrease in the synthesis of thyroid hormone, a very crucial component needed for metabolism, neural development, and a number of other physiological functions in the body. Perchlorate remediation from ground water and drinking water is carried out through a series of physical-chemical techniques like ion (particle) transfer and reverse osmosis. However, the generation of waste through these processes are difficult to manage, so the need for alternative treatment methods occur. This review talks about the hybrid technologies that are currently researched and gaining momentum in the treatment of emerging contaminants, namely perchlorate.

Enhancing spectral quality in complex environmental matrices: Supporting suspect and non-target screening in zebra mussels with ion mobility

Identification of bioaccumulating contaminants of emerging concern (CECs) via suspect and non-target screening remains a challenging task. In this study, ion mobility separation with high-resolution mass spectrometry (IM-HRMS) was used to investigate the effects of drift time (DT) alignment on spectrum quality and peak annotation for screening of CECs in complex sample matrices using data independent acquisition (DIA). Data treatment approaches (Binary Sample Comparison) and prioritisation strategies (Halogen Match, co-occurrence of features in biota and the water phase) were explored in a case study on zebra mussel (Dreissena polymorpha) in Lake Mälaren, Sweden's largest drinking water reservoir. DT alignment evidently improved the fragment spectrum quality by increasing the similarity score to reference spectra from on average (±standard deviation) 0.33 ± 0.31 to 0.64 ± 0.30 points, thus positively influencing structure elucidation efforts. Thirty-two features were tentatively identified at confidence level 3 or higher using MetFrag coupled with the new PubChemLite database, which included predicted collision cross-section values from CCSbase. The implementation of predicted mobility data was found to support compound annotation. This study illustrates a quantitative assessment of the benefits of IM-HRMS on spectral quality, which will enhance the performance of future screening studies of CECs in complex environmental matrices.

Analytical Chemistry: Tasks, Resolutions and Future Standpoints of the Quantitative Analyses of Environmental Complex Sample Matrices

Currently, the challenges that analytical chemistry has to face are ever greater and more complex both from the point of view of the selectivity of analytical methods and their sensitivity. This is especially true in quantitative analysis, where various methods must include the development and validation of new materials, strategies, and procedures to meet the growing need for rapid, sensitive, selective, and green methods. In this context, given the International Guidelines, which over time, are updated and which set up increasingly stringent “limits”, constant innovation is required both in the pre-treatment procedures and in the instrumental configurations to obtain reliable, accurate, and reproducible information. In addition, the environmental field certainly represents the greatest challenge, as analytes are often present at trace and ultra-trace levels. These samples containing analytes at ultra-low concentration levels, therefore, require very labor-intensive sample preparation procedures and involve the high consumption of organic solvents that may not be considered “green”. In the literature, in recent years, there has been a strong development of increasingly high-performing sample preparation techniques, often “solvent-free”, as well as the development of hyphenated instrumental configurations that allow for reaching previously unimaginable levels of sensitivity. This review aims to provide an update of the most recent developments currently in use in sample pre-treatment and instrument configurations in the environmental field, also evaluating the role and future developments of analytical chemistry in light of upcoming challenges and new goals yet to be achieved.

Thorough investigation of non-volatile substances extractible from inner coatings of metallic cans and their occurrence in the canned vegetables

Since the decline of the use of bisphenol A, the chemistry of the varnishes and coatings which are applied to the inner surfaces of metallic food contact materials is poorly documented. We hypothesised that can coatings are now diverse and bring forth various non-intentionally added substances (NIAS) to be described. Investigating complex components such as NIAS requires demanding non-targeted approaches. We investigated the coatings of 12 vegetable cans from the French market. More than 125 substances were pinpointed, among them 84 oligoester combinations from 8 diols and 4 diacids. Thus, oligoesters were the dominant family. Additives such as epoxidised soybean oil, bisphenol A diglycidyl ether and benzoguanamine derivatives and phenol-formaldehyde oligomers were also identified. A software for exploring databases of theoretical combinations of polyester and phenol-formaldehyde resin components (NIAS-db 1.0) was made available. The stepwise organic synthesis of native and deuterated combinations of neopentyl glycol and isophthalic acid (4 and 8 units, linear and cyclic) enabled a higher confidence level and monitoring in vegetable extracts. Migration of oligoesters averaged 330 µg/kg in the drained vegetables (43-1600 µg/kg). This study sheds light on the need to fulfil a proper risk assessment on this NIAS family (exposure and hazard characterisation).

Analytical derivatizations in environmental analysis

Analytical derivatization is a technique that alters the structure of an analyte and produces a product more suitable for analysis. While this process can be time-consuming and add reagents to the procedure, it can also facilitate the isolation of the analyte(s), enhance analytes' stability, improve separation and sensitivity, and reduce matrix interferences. Since derivatization is a functional group analysis, it improves selectivity by separating reactive from neutral compounds during sample preparation. This technique introduces detector-orientated tags into analytes that lack suitable physicochemical properties for detection at low concentrations. Notably, many regulatory bodies, especially those in the environmental field, require these characteristics in analytical methods. This review focuses on note-worthy analytical derivatization methods employed in environmental analyses with functional groups, phenol, carboxylic acid, aldehyde, ketone, and thiol in aqueous, soil, and atmospheric sample matrices. Both advantages and disadvantages of analytical derivatization techniques are discussed. In addition, we discuss the future directions of analytical derivatization methods in environmental analysis and the potential challenges.

Evidence of complementarity between targeted and non-targeted analysis based on liquid and gas-phase chromatography coupled to mass spectrometry for screening halogenated persistent organic pollutants in environmental matrices

This study explored the complementarity between targeted (TS) and non-targeted screening (NTS) based on liquid and gas-phase chromatography coupled to (high-resolution) mass spectrometry (LC-/GC-(HR)MS) for the comprehensive characterization of organohalogen fingerprints within a set of Lake Ontario lake trout samples. The concentrations of 86 legacy, emerging and novel halogenated compounds (HCs), were determined through 4 TS approaches involving no less than 6 hyphenated systems. In parallel, an innovative NTS strategy, involving both LC and GC-Q-Orbitrap, was implemented to specifically highlight halogenated signals. Non-targeted HRMS data were processed under the HaloSeeker software based on Cl and Br isotopic ratio and mass defect to extend the screening to unsuspected and unknown HCs. A total of 195 halogenated mass spectral features were characterized in the Lake Ontario lake trout, including well known HCs (PCBs, PBDEs, PBBs, DDT and their degradation products), emerging HCs (novel brominated flame retardants, short-, medium- and long-chain chlorinated paraffins) or suggested molecular formula (mainly polychlorinated ones). Among the 122 HCs highlighted by TS, only 21 were identified by NTS. These results fueled a discussion on the potential and limitations of both approaches, and the current position of NTS within environmental and health monitoring programs.

Suspect and non-target screening: the last frontier in environmental analysis

Suspect and non-target screening (SNTS) techniques are arising as new analytical strategies useful to disentangle the environmental occurrence of the thousands of exogenous chemicals present in our ecosystems. The unbiased discovery of the wide number of substances present over environmental analysis needs to find a consensus with powerful technical and computational requirements, as well as with the time-consuming unequivocal identification of discovered analytes. Within these boundaries, the potential applications of SNTS include the studies of environmental pollution in aquatic, atmospheric, solid and biological samples, the assessment of new compounds, transformation products and metabolites, contaminant prioritization, bioremediation or soil/water treatment evaluation, and retrospective data analysis, among many others. In this review, we evaluate the state of the art of SNTS techniques going over the normalized workflow from sampling and sample treatment to instrumental analysis, data processing and a brief review of the more recent applications of SNTS in environmental occurrence and exposure to xenobiotics. The main issues related to harmonization and knowledge gaps are critically evaluated and the challenges of their implementation are assessed in order to ensure a proper use of these promising techniques in the near future.

Nontargeted Analysis of Face Masks: Comparison of Manual Curation to Automated GCxGC Processing Tools

Masks constructed of a variety of materials are in widespread use due to the COVID-19 pandemic, and people are exposed to chemicals inherent in the masks through inhalation. This work aims to survey commonly available mask materials to provide an overview of potential exposure. A total of 19 mask materials were analyzed using a nontargeted analysis two-dimensional gas chromatography (GCxGC)-mass spectrometric (MS) workflow. Traditionally, there has been a lack of GCxGC-MS automated high-throughput screening methods, resulting in trade-offs with throughput and thoroughness. This work addresses the gap by introducing new machine learning software tools for high-throughput screening (Floodlight) and subsequent pattern analysis (Searchlight). A recursive workflow for chemical prioritization suitable for both manual curation and machine learning is introduced as a means of controlling the level of effort and equalizing sample loading while retaining key chemical signatures. Manual curation and machine learning were comparable with the mask materials clustering into three groups. The majority of the chemical signatures could be characterized by chemical class in seven categories: organophosphorus, long chain amides, polyethylene terephthalate oligomers, n-alkanes, olefins, branched alkanes and long-chain organic acids, alcohols, and aldehydes. The olefin, branched alkane, and organophosphorus components were primary contributors to clustering, with the other chemical classes having a significant degree of heterogeneity within the three clusters. Machine learning provided a means of rapidly extracting the key signatures of interest in agreement with the more traditional time-consuming and tedious manual curation process. Some identified signatures associated with plastics and flame retardants are potential toxins, warranting future study to understand the mask exposure route and potential health effects.

Membrane Removal of Emerging Contaminants from Water: Which Kind of Membranes Should We Use?

Membrane technologies are nowadays widely used; especially various types of filtration or reverse osmosis in households, desalination plants, pharmaceutical applications etc. Facing water pollution, they are also applied to eliminate emerging contaminants from water. Incomplete knowledge directs the composition of membranes towards more and more dense materials known for their higher selectivity compared to porous constituents. This paper evaluates advantages and disadvantages of well-known membrane materials that separate on the basis of particle size, usually exposed to a large amount of water, versus dense hydrophobic membranes with target transport of emerging contaminants through a selective barrier. In addition, the authors present several membrane processes employing the second type of membrane.