Microbial eco-physiological strategies for salinity-mediated crude oil biodegradation

Functional and structural responses of a halophilic consortium to oily sludge during biodegradation

Biotreatment of oily sludge and the involved microbial communities, particularly in saline environments, have been rarely investigated. We enriched a halophilic bacterial consortium (OS-100) from petroleum refining oily sludge, which degraded almost 86% of the aliphatic hydrocarbon (C10-C30) fraction of the oily sludge within 7 days in the presence of 100 g/L NaCl. Two halophilic hydrocarbon-degrading bacteria related to the genera Chromohalobacter and Halomonas were isolated from the OS-100 consortium. Hydrocarbon degradation by the OS-100 consortium was relatively higher compared to the isolated bacteria, indicating potential synergistic interactions among the OS-100 community members. Exclusion of FeCl2, MgCl2, CaCl2, trace elements, and vitamins from the culture medium did not significantly affect the hydrocarbon degradation efficiency of the OS-100 consortium. To the contrary, hydrocarbon biodegradation dropped from 94.1 to 54.4% and 5% when the OS-100 consortium was deprived from phosphate and nitrogen sources in the culture medium, respectively. Quantitative PCR revealed that alkB gene expression increased up to the 3rd day of incubation with 11.277-fold, consistent with the observed increments in hydrocarbon degradation. Illumina-MiSeq sequencing of 16 S rRNA gene fragments revealed that the OS-100 consortium was mainly composed of the genera Halomonas, Idiomarina, Alcanivorax and Chromohalobacter. This community structure changed depending on the culturing conditions. However, remarkable changes in the community structure were not always associated with remarkable shifts in the hydrocarbonoclastic activity and vice versa. The results show that probably synergistic interactions between community members and different subpopulations of the OS-100 consortium contributed to salinity tolerance and hydrocarbon degradation.

Biodegradation of Crude Oil by Nitrate-Reducing, Sulfate-Reducing, and Methanogenic Microbial Communities under High-Pressure Conditions

Carbon capture, utilization, and storage (CCUS) is an important component in many national net-zero strategies, and ensuring that CO2 can be safely and economically stored in geological systems is critical. Recent discoveries have shown that microbial processes (e.g., methanogenesis) can modify fluid composition and fluid dynamics within the storage reservoir. Oil reservoirs are under high pressure, but the influence of pressure on the petroleum microbial community has been previously overlooked. To better understand microbial community dynamics in deep oil reservoirs, we designed an experiment to examine the effect of high pressure (12 megapascals [MPa], 60 °C) on nitrate-reducing, sulfate-reducing, and methanogenic enrichment cultures. Cultures were exposed to these conditions for 90 d and compared with a control exposed to atmospheric pressure (0.1 MPa, 60 °C). The degradation characteristic oil compounds were confirmed by thin-layer analysis of oil SARA (saturates, aromatics, resins, and asphaltenes) family component rods. We found that the asphaltene component in crude oil was biodegraded under high pressure, but the concentration of asphaltenes increased under atmospheric pressure. Gas chromatography analyses of saturates showed that short-chain saturates (C8-C12) were biodegraded under high and atmospheric pressure, especially in the methanogenic enrichment culture under high pressure (the ratio of change was -81%), resulting in an increased relative abundance of medium- and long-chain saturates. In the nitrate-reducing and sulfate-reducing enrichment cultures, long-chain saturates (C22-C32) were biodegraded in cultures exposed to high-pressure and anaerobic conditions, with a ratio of change of -8.0% and -2.3%, respectively. However, the relative proportion of long-chain saturates (C22-C32) increased under atmospheric pressure. Gas Chromatography Mass Spectrometry analyses of aromatics showed that several naphthalene series compounds (naphthalene, C1-naphthalene, and C2-naphthalene) were biodegraded in the sulfate-reducing enrichment under both atmospheric pressure and high pressure. Our study has discerned the linkages between the biodegradation characteristics of crude oil and pressures, which is important for the future application of bioenergy with CCUS (bio-CCUS).

Simultaneous production of biosurfactant and extracellular unspecific peroxygenases by Moesziomyces aphidis XM01 enables an efficient strategy for crude oil degradation

Crude oil is a hazardous pollutant that poses significant and lasting harm to human health and ecosystems. In this study, Moesziomyces aphidis XM01, a biosurfactant mannosylerythritol lipids (MELs)-producing yeast, was utilized for crude oil degradation. Unlike most microorganisms relying on cytochrome P450, XM01 employed two extracellular unspecific peroxygenases, MaUPO.1 and MaUPO.2, with preference for polycyclic aromatic hydrocarbons (PAHs) and n-alkanes respectively, thus facilitating efficient crude oil degradation. The MELs produced by XM01 exhibited a significant emulsification activity of 65.9% for crude oil and were consequently supplemented in an "exogenous MELs addition" strategy to boost crude oil degradation, resulting in an optimal degradation ratio of 72.3%. Furthermore, a new and simple "pre-MELs production" strategy was implemented, achieving a maximum degradation ratio of 95.9%. During this process, the synergistic up-regulation of MaUPO.1, MaUPO.1 and the key MELs synthesis genes contributed to the efficient degradation of crude oil. Additionally, the phylogenetic and geographic distribution analysis of MaUPO.1 and MaUPO.1 revealed their wide occurrence among fungi in Basidiomycota and Ascomycota, with high transcription levels across global ocean, highlighting their important role in biodegradation of crude oil. In conclusion, M. aphidis XM01 emerges as a novel yeast for efficient and eco-friendly crude oil degradation.

Low-voltage stimulated denitrification performance of high-salinity wastewater using halotolerant microorganisms

Nitrate is a common contaminant in high-salinity wastewater, which has adverse effects on both the environment and human health. However, conventional biological treatment exhibits poor denitrification performance due to the high-salinity shock. In this study, an innovative approach using an electrostimulating microbial reactor (EMR) was explored to address this challenge. With a low-voltage input of 1.2 V, the EMR reached nitrate removal kinetic parameter (kNO3-N) of 0.0166-0.0808 h-1 under high-salinities (1.5 %-6.5 %), which was higher than that of the microbial reactor (MR) (0.0125-0.0478 h-1). The mechanisms analysis revealed that low-voltage significantly enhanced microbial salt-in strategy and promoted the secretion of extracellular polymeric substances. Halotolerant denitrification microorganisms (Pseudomonas and Nitratireductor) were also enriched in EMR. Moreover, the EMR achieved a NO3-N removal efficiency of 73.64 % in treating high-salinity wastewater (salinity 4.69 %) over 18-cycles, whereas the MR only reached 54.67 %. In summary, this study offers an innovative solution for denitrification of high-salinity wastewater.

Microbial Remediation of Crude Oil in Saline Conditions by Oil-Degrading Bacterium Priestia megaterium FDU301

Salinity greatly affects the microbial degradation process of crude oil; thus, the isolation and identification of halotolerant microbes is essential. Limited studies explored how microbes respond to increased salinity. In this study, an oil-degrading bacterium Priestia megaterium FDU301 was isolated from the Dagang oil field, which can tolerate a salinity of 6%. Compared to the non-saline condition, oil degradation ratios by P. megaterium FDU301 increased by 15.27% and 11.26% in 0.5% and 3.5% salinity media, respectively. Meanwhile, bacteria degraded various components of crude oil more thoroughly in saline environments, especially mid-chain hydrocarbons (C11-C18). Surface tension under salt stress was lower than that in the non-saline medium, indicating that the amount of biosurfactants produced by bacteria was increased. The microbial activity enhanced markedly in response to increased salinity, which was the main factor for the high degradation ability. As a vital component of biofilms, the production of polysaccharides was accelerated with P. megaterium FDU301 inoculation in saline environments. These results indicate that P. megaterium FDU301 has great potential application in oil bioremediation in saline environments.

Metagenomic and proteomic insights into the self-adaptive cell surface hydrophobicity of Sphingomonas sp. strain PAH02 reducing the migration of cadmium-phenanthrene co-pollutant in rice

Cell surface hydrophobicity (CSH) dominates the interactions between rhizobacteria and pollutants at the soil-water interface, which is critical for understanding the dissipation of pollutants in the rhizosphere microzone of rice. Herein, we explored the effects of self-adaptive CSH of Sphingomonas sp. strain PAH02 on the translocation and biotransformation behaviour of cadmium-phenanthrene (Cd-Phe) co-pollutant in rice and rhizosphere microbiome. We evidenced that strain PAH02 reduced the adsorption of Cd-Phe co-pollutant on the rice root surface while enhancing the degradation of Phe and adsorption of Cd via its self-adaptive CSH in the hydroponic experiment. The significant upregulation of key protein expression levels such as MerR, ARHDs and enoyl-CoA hydratase/isomerase, ensures self-adaptive CSH to cope with the stress of Cd-Phe co-pollutant. Consistently, the bioaugmentation of strain PAH02 promoted the formation of core microbiota in the rhizosphere soil of rice (Oryza sativa L.), such as Bradyrhizobium and Streptomyces and induced gene enrichment of CusA and PobA that are strongly associated with pollutant transformation. Consequently, the contents of Cd and Phe in rice grains at maturity decreased by 17.2% ± 0.2% and 65.7% ± 0.3%, respectively, after the bioaugmentation of strain PAH02. These findings present new opportunities for the implementation of rhizosphere bioremediation strategies of co-contaminants in paddy fields.

Microbial community composition and degradation potential of petroleum-contaminated sites under heavy metal stress

Total petroleum hydrocarbons (n-alkanes), semi-volatile organic compounds, and heavy metals pose major ecological risks at petrochemical-contaminated sites. The efficiency of natural remediation in situ is often unsatisfactory, particularly under heavy metal pollution stress. This study aimed to verify the hypothesis that after long-term contamination and restoration, microbial communities in situ exhibit significantly different biodegradation efficiencies under different concentrations of heavy metals. Moreover, they determine the appropriate microbial community to restore the contaminated soil. Therefore, we investigated the heavy metals in petroleum-contaminated soils and observed that heavy metals effects on distinct ecological clusters varied significantly. Finally, alterations in the native microbial community degradation ability were demonstrated through the occurrence of petroleum pollutant degradation function genes in different communities at the tested sites. Furthermore, structural equation modeling (SEM) was used to explain the influence of all factors on the degradation function of petroleum pollution. These results suggest that heavy metal contamination from petroleum-contaminated sites reduces the efficiency of natural remediation. In addition, it infers that MOD1 microorganisms have greater degradation potential under heavy metal stress. Utilizing appropriate microorganisms in situ may effectively help resist the stress of heavy metals and continuously degrade petroleum pollutants.

Exploring the use of sodium caseinate-assisted responsive separation for the treatment of washing effluents in shoreline oil spill response

The produced effluents after shoreline washing contain a certain number of oil droplets and further treatment is necessary. In this study, the innocuous, widely available, and biodegradable sodium caseinate (NaCas) was deployed to capture oil pollutants from oily wastewater. Oil droplets can be effectively and rapidly captured by NaCas and subsequently removed after pH-triggered separation, producing a clean supernatant with low turbidity. The removal efficiency was enhanced by increasing NaCas concentration and separation time. The salinity inhibited the oil removal by increasing the interfacial tension of NaCas and reducing their sorption sites caused by the large particle size. Humic acid negatively influenced the oil separation performance of NaCas because of the competitive sorption and enhanced repulsion force between oil and NaCas. In addition, the increasing temperature was found to augment the oil removal. Factorial analysis revealed the individual factors and two-factor interactions that had significant effects on oil removal. Biotoxicity experiments proved that NaCas can fully offset the inhibitory effect of oil on the photosynthesis of algae and thus promote algae growth. Two post-treatment methods, namely thermal treatment, and biodegradation, can be used for the post-treatment of NaCas/oil precipitation residues. The use of NaCas-assisted responsive separation in the treatment of washing effluents can help achieve a sustainable shoreline oil spill response.

Sustainable production of bioemulsifiers, a critical overview from microorganisms to promising applications

Microbial bioemulsifiers are molecules of amphiphilic nature and high molecular weight that are efficient in emulsifying two immiscible phases such as water and oil. These molecules are less effective in reducing surface tension and are synthesized by bacteria, yeast and filamentous fungi. Unlike synthetic emulsifiers, microbial bioemulsifiers have unique advantages such as biocompatibility, non-toxicity, biodegradability, efficiency at low concentrations and high selectivity under different conditions of pH, temperature and salinity. The adoption of microbial bioemulsifiers as alternatives to their synthetic counterparts has been growing in ongoing research. This article analyzes the production of microbial-based emulsifiers, the raw materials and fermentation processes used, as well as the scale-up and commercial applications of some of these biomolecules. The current trend of incorporating natural compounds into industrial formulations indicates that the search for new bioemulsifiers will continue to increase, with emphasis on performance improvement and economically viable processes.

Responses of Alcanivorax species to marine alkanes and polyhydroxybutyrate plastic pollution: Importance of the ocean hydrocarbon cycles

Understanding microbial responses to hydrocarbon and plastic pollution are crucial for limiting the detrimental impacts of environmental contaminants on marine ecosystems. Herein, we reported a new Alcanivorax species isolated from the North Atlantic Ocean capable of degrading alkanes and polyhydroxybutyrate (PHB) plastic (one of the emerging bioplastics that may capture the future plastic market). The whole-genome sequencing showed that the species harbors three types of alkane 1-monooxygenases (AlkB) and one PHB depolymerase (PhaZ) to initiate the degradation of alkanes and plastics. Growth profiling demonstrated that n-pentadecane (C15, the main alkane in the marine environment due to cyanobacterial production other than oil spills) and PHB could serve as preferential carbon sources. However, the cell membrane composition, PhaZ activity, and expression of three alkB genes were utterly different when grown on C15 and PHB. Further, Alcanivorax was a well-recognized alkane-degrader that participated in the ocean hydrocarbon cycles linking with hydrocarbon production and removal. Our discovery supported that the existing biogeochemical processes may add to the marine ecosystem's resilience to the impacts of plastics.

Comparison of O3, UV/O3, and UV/O3/PS processes for marine oily wastewater treatment: Degradation performance, toxicity evaluation, and flocs analysis

Efficient on-site treatment technology is crucial for mitigating marine oily wastewater pollution. This work investigates the ozone (O₃), ultraviolet (UV)/O₃, UV/O₃/persulfate (PS) processes for the treatment of marine oily wastewater, including degradation performance, acute toxicity evaluation, and oil flocs analysis in a benchtop circulating flow photoozonation reactor. Degradation performances have been studied by measuring the degradation rate of total oil concentrations, specific oil components (n-alkanes and polycyclic aromatic hydrocarbons (PAHs)), and total organic carbon (TOC). The results show that UV/O₃/PS could significantly enhance the removal efficiency than the other two processes, with above 90% of removal efficiency in 30 min. Acute toxicity analysis further shows that the wastewater quality is significantly improved by four-fold of the EC₅₀ of Vibrio fischeri, and the mortality of Artemia franciscana decreases from 100% to 0% after 48 h exposure. Further, the morphology and functional groups of flocs have been further characterized, showing that the floating flocs could be further degraded especially in UV/O₃/PS process. Our study further raised discussions regarding the future on-site application of O₃-based systems, based on the results generated from the treatment efficiency, toxicity, and flocs characterization. The regulation of the oxidation strength and optimization of the reaction systems could be a practical strategy for on-site marine oily wastewater treatment.

Toxicity determination, pollution source delineation, and microbial diversity evaluation of PAHs-contaminated sediments for an urban river

The Feng-Sang River is a metropolitan river in Kaohsiung City, Taiwan. In this study, Feng-Sang River sediments were analyzed to investigate the distributions and sources of polycyclic aromatic hydrocarbons (PAHs). The Sediment Quality Guidelines (SQGs), potentially carcinogenic PAHs (TEQcarc), and toxic equivalence quotient (TEQ) were applied to evaluate influences of PAHs on ecosystems and microbial diversities. Results indicate that PAHs concentrations varied between seasons and locations. The concentrations of ∑16PAHs ranged from 73.6 to 603.8 ng/kg in dry seasons and from 2.3 to 199.3 ng/kg in wet seasons. This could be because of the flushing effect during wet seasons, which caused the movement and dilution of the PAH-contaminated sediments. Diagnostic ratio analysis infers that high PAHs levels were generated by combustion processes and vehicle traffic, and results from multivariate descriptive statistical analysis also demonstrate that the vehicular traffic pollution could be the major emission source of PAHs contamination. Comparisons of PAHs with SQGs indicate that PAHs concentrations in sediment were below the effects range low (ERL) values, and thus, the immediate threat to organisms might not be significant. The diagnostic ratio analyses are effective methods for PAH source appointment. The metagenomic assay results imply that sediments contained essential microbial species with eminent diversity. The detected PAH-degrading bacteria (Desulfatiglans, Dechloromonas, Sphingomonas, Methylobacterium, Rhodobacter, Clostridium, and Exiguobacterium) played a key role in PAHs biotransformation, and Dechloromonas and Rhodobacter had a higher relative abundance. Results of microbial diversity analyses indicate that the contaminated environment induced the changes of governing microbial groups in sediments. PRACTITIONER POINTS: Diagnostic ratio analyses are effective methods for PAHs source appointment. Microbial composition in sediments are highly affected by anthropogenic pollution. Combustion and vehicle traffic contribute to urban river sediments pollution by PAHs. Dechloromonas and Rhodobacter are dominant PAHs-degrading bacteria in sediments.

Development of advanced oil/water separation technologies to enhance the effectiveness of mechanical oil recovery operations at sea: Potential and challenges

Mechanical oil recovery (i.e., booming and skimming) is the most common tool for oil spill response. The recovered fluid generated from skimming processes may contain a considerable proportion of water (10 % ~ 70 %). As a result of regulatory prohibition on the discharge of contaminated waters at sea, vessels and/or storage barges must make frequent trips to shore for oil-water waste disposal. This practice can be time- consuming thus reduces the overall efficiency and capacity of oil recovery. One potential solution is on-site oil-water separation and disposal of water fraction at sea. However, currently available decanting processes may have limited oil/water separation capabilities, especially in the presence of oil-water emulsion, which is inevitable in mechanical oil recovery. The decanted water may not meet the discharge standards and cause severe ecotoxicological impacts. This paper therefore comprehensively reviews the principles and progress in oil/water separation, demulsification, and on-site treatment technologies, investigates their applicability on decanting at sea, and discusses the ecotoxicity of decanted water in the marine environment. The outputs provide the fundamental and practical knowledge on decanting and help enhance response effectiveness and consequently reducing the environmental impacts of oil spills.

Hydrocarbon bioremediation on Arctic shorelines: Historic perspective and roadway to the future

Climate change has become one of the greatest concerns of the past few decades. In particular, global warming is a growing threat to the Canadian high Arctic and other polar regions. By the middle of this century, an increase in the annual mean temperature of 1.8 °C-2.7 °C for the Canadian North is predicted. Rising temperatures lead to a significant decrease of the sea ice area covered in the Northwest Passage. As a consequence, a surge of maritime activity in that region increases the risk of hydrocarbon pollution due to accidental fuel spills. In this review, we focus on bioremediation approaches on Arctic shorelines. We summarize historical experimental spill studies conducted at Svalbard, Baffin Island, and the Kerguelen Archipelago, and review contemporary studies that used modern omics techniques in various environments. We discuss how omics approaches can facilitate our understanding of Arctic shoreline bioremediation and identify promising research areas that should be further explored. We conclude that specific environmental conditions strongly alter bioremediation outcomes in Arctic environments and future studies must therefore focus on correlating these diverse parameters with the efficacy of hydrocarbon biodegradation.

Biodegradation of tricresyl phosphates isomers by a novel microbial consortium and the toxicity evaluation of its major products

A novel microbial consortium ZY1 capable of degrading tricresyl phosphates (TCPs) was isolated, it could quickly degrade 100% of 1 mg/L tri-o-cresyl phosphate (ToCP), tri-p-cresyl phosphate (TpCP) and tri-m-cresyl phosphate (TmCP) within 36, 24 and 12 h separately and intracellular enzymes occupied the dominated role in TCPs biodegradation. Additionally, triphenyl phosphate (TPHP), 2-ethylhexyl diphenyl phosphate (EHDPP), bisphenol-A bis (diphenyl phosphate) (BDP), tris (2-chloroethyl) phosphate (TCEP) and tris (1-chloro-2-propyl) phosphate (TCPP) could also be degraded by ZY1 and the aryl-phosphates was easier to be degraded. The TCPs reduction observed in freshwater and seawater indicated that high salinity might weak the degradability of ZY1. The detected degradation products suggested that TCPs was mainly metabolized though the hydrolysis and hydroxylation. Sequencing analysis presented that the degradation of TCPs relied on the cooperation between sphingobacterium, variovorax and flavobacterium. The cytochrome P450/NADPH-cytochrome P450 reductase and phosphatase were speculated might involve in TCPs degradation. Finally, toxicity evaluation study found that the toxicity of the diesters products was lower than their parent compound based on the generation of the intracellular reactive oxygen (ROS) and the apoptosis rate of A549 cell. Taken together, this research provided a new insight for the bioremediation of TCPs in actual environment.

Experimental and modeling studies of the effects of nanoclay on the oil behaviors in a water-sand system

When oil is released into the oceans, spilled oil may get to the shoreline driven by wind and wave. This study comprehensively explored the effects of bentonite nanoclay on the oil behaviors in a water-sand system from both experimental and modeling perspectives. Four factors including nanoclay concentration, temperature, salinity, and pH have been studied. The increasing nanoclay concentration resulted in the decrease in remaining oil on sand. Higher temperature and salinity were associated with less residual oil on sand in the presence of nanoclay. The lower residual oil on sand with coexisting nanoclay was found to be at pH 7. The factorial analysis results indicated that the nanoclay concentration showed the most significant impact among these factors. Miscibility modeling results showed an increasing temperature was favorable to the nanoclay miscibility. Moreover, the effect of nanoclay on oil behavior was further revealed through the dynamic simulation, in which it can be seen the nanoclay could penetrate into oil droplets and promote the oil detachment from solid substrate. The results of this study can help understand the role of fine particles in the fate and transport of oil on shoreline and support the risk assessment and response planning after oil spill.

Bacteria Halotolerant from Karst Sinkholes as a Source of Biosurfactants and Bioemulsifiers

Halotolerant bacteria with biosurfactant (BS) and bioemulsifiers (BE) activity can coexist in Karstic sinkholes with marine influence. Two sinkholes in the Yucatan peninsula were selected to isolate bacteria with BE and BS activity stable in NaCl. The optimal time, the effect of nitrogen and carbon source in the medium, and the conditions (agitation, pH and salinity) for the production of BS and BE compounds in planktonic and sessile (stimulate the formation of biofilms in cell roller) culture were determined. Eighty strains showed the highest emulsification activity (EI24 ≥ 50%) and drop-collapse ≥ 4 mm. 87% of the strains are moderately halotolerant, and 21% bordered the limit of extreme halotolerance. Twenty-four strains maintained or improved their BS and BE activity under salinity conditions at 5% and 10%, being the most active genera Bacillus, Paenibacillus and Lysinibacillus, identified by sequencing of the 16S rRNA gene. The results show that the nitrogen source positively affects the BS and BE activity, regardless of the type of culture. The sessile culture markedly stimulated BS activity with significant differences. However, we did not find a greater influence on the culture conditions. The results suggest that halotolerant bacteria from sinkholes could be implemented in bioremediation and other biotechnological applications.

Characterizing sediment bacterial community and identifying the biological indicators in a seawater-freshwater transition zone during the wet and dry seasons

Seawater intrusion has a detrimental effect on agriculture, industry, and human health. One question of particular interest is how the microbial community responds to and reflects seawater intrusion with seasonal variation. The current study explored the seasonal changes in bacterial community composition and interaction in the vicinity of Pearl River Estuary in dry season (January) and wet season (September). Results indicated that the salinity of sediment samples obtained in dry season was higher than that in wet season. The salt stress induced a declined alpha diversity but resulted in a loosely connected and unstable biotic interaction network in the bacterial communities. Random forest prediction and redundancy analysis of bacterial community indicated that salinity substantially affected the bacterial communities. Multiple lines of evidence, including the enrichment of bacterial taxa in the high-salinity location, microbe-microbe interactions, environment-microbe interactions, and machine learning approach, demonstrated that the families Moraxellaceae and Planococcaceae were the keystone taxa and were resistant to salt stress, which suggested that both of them can be used as potential biological indicators of monitoring and controlling seawater intrusion in coastal zone areas.

Cleanup of oiled shorelines using a dual responsive nanoclay/sodium alginate surface washing agent

Oil spills may affect ecosystems and endanger public health. In this study, we developed a novel and dual responsive nanoclay/sodium alginate (NS) washing fluid, and systematically evaluated its application potential in oiled shoreline cleanup. The characterization results demonstrated that sodium alginate combined with nanoclay via hydrogen bonds, and was inserted into the interlayer spacing of nanoclay. Adding sodium alginate reduced surface and interfacial tensions, while increasing the viscoelasticity of the washing fluid. Batch experiments were conducted to investigate oil removal performance under various conditions. Additionally, the factorial design analysis showed that three single factors (temperature, oil concentration, and salinity), and two interactive effects (temperature/salinity; and oil concentration/HA) displayed significant effects on the oil removal efficiency of the NS washing fluid. Compared to the commercial surfactants, the NS composite exhibited satisfactory removal efficiencies for treating oily sand. Green materials-stabilized Pickering emulsion can potentially be used for oil/water separation. The NS washing agent displayed excellent pH- and Ca²⁺- responsiveness, generating transparent supernatants with low oil concentration and turbidity. Our work opens an interesting avenue for designing economical, high performance, and green washing agents.

From Surface Water to the Deep Sea: A Review on Factors Affecting the Biodegradation of Spilled Oil in Marine Environment

Over the past century, the demand for petroleum products has increased rapidly, leading to higher oil extraction, processing and transportation, which result in numerous oil spills in coastal-marine environments. As the spilled oil can negatively affect the coastal-marine ecosystems, its transport and fates captured a significant interest of the scientific community and regulatory agencies. Typically, the environment has natural mechanisms (e.g., photooxidation, biodegradation, evaporation) to weather/degrade and remove the spilled oil from the environment. Among various oil weathering mechanisms, biodegradation by naturally occurring bacterial populations removes a majority of spilled oil, thus the focus on bioremediation has increased significantly. Helping in the marginal recognition of this promising technique for oil-spill degradation, this paper reviews recently published articles that will help broaden the understanding of the factors affecting biodegradation of spilled oil in coastal-marine environments. The goal of this review is to examine the effects of various environmental variables that contribute to oil degradation in the coastal-marine environments, as well as the factors that influence these processes. Physico-chemical parameters such as temperature, oxygen level, pressure, shoreline energy, salinity, and pH are taken into account. In general, increase in temperature, exposure to sunlight (photooxidation), dissolved oxygen (DO), nutrients (nitrogen, phosphorous and potassium), shoreline energy (physical advection—waves) and diverse hydrocarbon-degrading microorganisms consortium were found to increase spilled oil degradation in marine environments. In contrast, higher initial oil concentration and seawater pressure can lower oil degradation rates. There is limited information on the influences of seawater pH and salinity on oil degradation, thus warranting additional research. This comprehensive review can be used as a guide for bioremediation modeling and mitigating future oil spill pollution in the marine environment by utilizing the bacteria adapted to certain conditions.

Natural attenuation of oil in marine environments: A review

Natural attenuation is an important process for oil spill management in marine environments. Natural attenuation affects the fate of oil by physical, chemical, and biological processes, which include evaporation, dispersion, dissolution, photo-oxidation, emulsification, oil particle aggregation, and biodegradation. This review examines the cumulative knowledge regarding these natural attenuation processes as well as their simulation and prediction using modelling approaches. An in-depth discussion is provided on how oil type, microbial community and environmental factors contribute to the biodegradation process. It describes how our understanding of the structure and function of indigenous oil degrading microbial communities in the marine environment has been advanced by the application of next generation sequencing tools. The synergetic and/or antagonist effects of oil spill countermeasures such as the application of chemical dispersants, in-situ burning and nutrient enrichment on natural attenuation were explored. Several knowledge gaps were identified regarding the synergetic and/or antagonistic effects of active response countermeasures on the natural attenuation/biodegradation process. This review highlighted the need for field data on both the effectiveness and potential detrimental effects of oil spill response options to support modelling and decision-making on their selection and application.

Crude Oil Degradation by a Novel Strain Pseudomonas aeruginosa AQNU-1 Isolated from an Oil-Contaminated Lake Wetland

In this study, a novel crude oil degrading bacterium was isolated from an oil-contaminated freshwater lake using crude oil as the sole carbon source. The strain was named Pseudomonas aeruginosa AQNU-1 based on the analyses of its morphological characteristics and 16S rRNA gene sequencing. Gas chromatography-mass spectrometry (GC-MS) was carried out to investigate the degradation of crude oil fractions under dynamic (37 °C, 180 r/min) and static (37 °C, 0 r/min) cultivation over three months of continuous enrichment in the laboratory. It was found that strain AQNU-1 exhibited stronger biodegradation efficiency for n-alkanes of C13–C35 under dynamic cultivation with degradation ratios of 87–100% compared to ratios of 74–100% under static cultivation. Furthermore, this strain could fully utilize alkylcyclohexane (M/Z 82), alkylbenzene (M/Z 92) and alkyltoluene (M/Z 106) in crude oil under both conditions. It also had better biodegradability of partial aromatic compounds in the crude oil, showing differences within compound families of aromatic hydrocarbons. Further, the potential degradation ability of this isolated strain decreased with increasing molecular weight, with the dynamic condition performing better in general. These results suggest that the isolated strain has great potential to assimilate indigestible crude-oil contaminants under different hydrological conditions, providing a valuable microbiological resource for in situ remediation of natural wetlands.

Machine learning-aided causal inference for unraveling chemical dispersant and salinity effects on crude oil biodegradation

Chemical dispersants have been widely applied to tackle oil spills, but their effects on oil biodegradation in global aquatic systems with different salinities are not well understood. Here, both experiments and advanced machine learning-aided causal inference analysis were applied to evaluate related processes. A halotolerant oil-degrading and biosurfactant-producing species was selected and characterized within the salinity of 0-70 g/L NaCl. Notably, dispersant addition can relieve the biodegradation barriers caused by high salinities. To navigate the causal relationships behind the experimental data, a structural causal model to quantitatively estimate the strength of causal links among salinity, dispersant addition, cell abundance, biosurfactant productivity and oil biodegradation was built. The estimated causal effects were integrated into a weighted directed acyclic graph, which showed that overall positive effects of dispersant addition on oil biodegradation was mainly through the enrichment of cell abundance. These findings can benefit decision-making prior dispersant application under different saline environments.

Metagenomic and Metatranscriptomic Responses of Chemical Dispersant Application during a Marine Dilbit Spill

The global increase in marine transportation of dilbit (diluted bitumen) can increase the risk of spills, and the application of chemical dispersants remains a common response practice in spill events. To reliably evaluate dispersant effects on dilbit biodegradation over time, we set large-scale (1500 mL) microcosms without nutrients addition using low dilbit concentration (30 ppm). Shotgun metagenomics and metatranscriptomics were deployed to investigate microbial community responses to naturally and chemically dispersed dilbit. We found that the large-scale microcosms could produce more reproducible community trajectories than small-scale (250 mL) ones based on the 16S rRNA gene amplicon sequencing. In the early-stage large-scale microcosms, multiple genera were involved into the biodegradation of dilbit, while dispersant addition enriched primarily Alteromonas and competed for the utilization of dilbit, causing depressed degradation of aromatics. The metatranscriptomic based Metagenome Assembled Genomes (MAG) further elucidated early-stage microbial antioxidation mechanism, which showed dispersant addition triggered the increased expression of the antioxidation process genes of Alteromonas species. Differently, in the late stage, the microbial communities showed high diversity and richness and similar compositions and metabolic functions regardless of dispersant addition, indicating the biotransformation of remaining compounds can occur within the post-oil communities. These findings can guide future microcosm studies and the application of chemical dispersants for responding to a marine dilbit spill. Importance In this study, we employed microcosms to study the effects of marine dilbit spill and dispersant application on microbial community dynamics over time. We evaluated the impacts of microcosm scale and found that increasing the scale is beneficial for reducing community stochasticity, especially in the late stage of biodegradation. We observed that dispersant application suppressed aromatics biodegradation in the early stage (6 days) whereas exerting insignificant effects in the late stage (50 days), from both substances removal and metagenomic/metatranscriptomic perspectives. We further found that Alteromonas species are vital for the early-stage chemically dispersed oil biodegradation, and clarified their degradation and antioxidation mechanisms. The findings would help to better understand microcosm studies and microbial roles for biodegrading dilbit and chemically dispersed dilbit, and suggest that dispersant evaluation in large-scale systems and even through field trails would be more realistic after marine oil spill response.

Exploring the use of alginate hydrogel coating as a new initiative for emergent shoreline oiling prevention

Marine oil spills are often reported as a result of activities associated with oil exploration, production and transportation. The spilled oil may reach the shoreline, and then the stranded oil can persist for a long time, exerting many negative effects on coastal ecosystems. Conventional shoreline cleanup methods cannot effectively remove the oil residues from affected areas and are very expensive. Therefore, the use of alginate hydrogel coatings was proposed as a new initiative for emergent shoreline oiling prevention. The alginate hydrogel-coated gravels showed high surface roughness, as well as remarkable water wetting and low-oil-adhesion properties. There was a low oil adhesion on the coated gravels in the continuous test with oil/water emulsion flow, indicating the excellent oil-repellent properties of the coated substrate. The results of batch oil-repellent tests showed that independent of the kind or weathering degree of the oil used, oil can be easily washed out from the coated gravels. The coated gravels had good environmental stability and the slightly partial de-crosslinking of alginate structure would not reduce the oil repellence performance. Moreover, the performance of the alginate hydrogel-coated gravel was further proved with a laboratory shoreline tank simulator, in which more stranded oil floated to the water surface and less oil remained on gravels and entered into subsurface. This proposed oiling prevention method can be used not only for shorelines but also for coastal piers, seaports, and solid manmade shorelines. The coating material is derived from the biomass in the ocean and can be degraded under natural conditions. This study may provide a unique direction for the future development of green oil spill control strategy.

Multiphase CFD simulation of the nearshore spilled oil behaviors

Oil spills are a serious environmental problem. To better support risk assessment and pollution control for oil spills, a good understanding of oil transport in the environment is required. This study focused on the numerical simulation of the nearshore oil behaviors based on computational fluid dynamics. Based on the Navier-Stokes momentum equations for an incompressible viscous fluid and volume of fluid (VOF) method, a 3D numerical model of three-phase transient flow was developed. The wave number, averaged flow velocity and oil properties would affect the oil spread extent and the oil volume fraction. The higher the averaged flow velocity and wave number, the lower the oil concentration, and the faster the horizontal movement of the oil. The spilled oil may move to contact the seafloor by increasing the averaged flow velocity at the inlet boundary. Through increasing the wave number, the oil would stay near the water surface. In the nearshore, where the wave is the main seawater motion, the oil containment boom should be set preferentially to the direction of wave transmission for oil cleaning. This study shows that by doubling the wave number and increasing the averaged flow velocity (ten times) at the same time, the maximum oil volume fraction would be reduced by around 32%. Finally, the water temperature had no significant impact on the oil migration, and the impact of evaporation should be considered in the simulation.

Access-dispersion-recovery strategy for enhanced mitigation of heavy crude oil pollution using magnetic nanoparticles decorated bacteria

Heavy crude oil (HCO) pollution has gained global attention, but traditional bioremediating practices demonstrate limited effectiveness. This study developed magnetic nanoparticles decorated bacteria (MNPB) using an oil-degrading and biosurfactant-producing Rhodococcus erythropolis species and identified a novel access-dispersion-recovery strategy for enhanced HCO pollution mitigation. The strategy entails (1) magnetic navigation of the MNPB towards HCO layer, (2) enhanced oil dispersion and formation of suspended oil-bacteria aggregates, and (3) magnetic recovery of these aggregates. The UV-spectrophotometer analysis showed that this strategy can enable up to 62% removal of HCO. The GC-MS analysis demonstrated that the MNPB enhanced the degradation of low-molecular-weight aromatics comparing with the pure bacteria, and the recovery process further removed oil-bacteria aggregates and entrained high-molecular-weight aromatics. The feasibility of using MNPB to mitigate HCO pollution could shed light on the emerging bioremediation applications.

A cross-comparison of biosurfactants as marine oil spill dispersants: Governing factors, synergetic effects and fates

Biosurfactant-based dispersants (BBDs) may be more effective, cost-efficient and environmentally friendly than dispersants currently used for oil spill response. An improved understanding of BBD performance is needed to advance their development and commercial use. In this study, the ability of four BBDs, i.e. sufactins, trehalose lipids, rhamnolipids and exmulsins, alone and as various combinations to disperse Arabian light crude oil and weathered Alaska North Slope crude oil was compared to a widely used commercial oil dispersant (Corexit 9500A). Surfactin and trehalose lipids, which have balanced surface activity/emulsification ability, showed dispersion efficacy comparable to Corexit 9500A. Rhamnolipids (primarily a surface-active agent) and exmulsins (primarily an emulsifier) when used alone had significantly lower efficacy. However, blends of these surfactants had excellent dispersion performance because of synergistic effects. Balanced surface activity and emulsification ability may be key to formulate effective BBDs. Of the BBDs evaluated, surfactins with an effective dispersant-to-oil ratio as low as 1:62.3 and trehalose lipids with high oil affinity, biodegradation rate, and low toxicity characteristics show the most promise for commercial development.

Anaerobic-petroleum degrading bacteria: Diversity and biotechnological applications for improving coastal soil

Due to the industrial emissions and accidental spills, the critical material for modern industrial society petroleum pollution causes severe ecological damage. The prosperous oil exploitation and transportation causes the recalcitrant, hazardous, and carcinogenic sludge widespread in the coastal wetlands. The costly physicochemical-based remediation remains the secondary and inadequate treatment for the derivatives along with the tailings. Anaerobic microbial petroleum degrading biotechnology has received extensive attention for its cost acceptable, eco-friendly, and fewer health hazards. As a result of the advances in biotechnology and microbiology, the anaerobic oil-degrading bacteria have been well developing to achieve the same remediation effects with lower operating costs. This review summarizes the advantages and potential scenarios of the anaerobic degrading bacteria, such as sulfate-reducing bacteria, denitrifying bacteria, and metal-reducing bacteria in the coastal area decomposing the alkanes, alkenes, aromatic hydrocarbons, polycyclic aromatic, and related derivatives. In the future, a complete theoretical basis of microbiological biotechnology, molecular biology, and electrochemistry is necessary to make efficient and environmental-friendly use of anaerobic degradation bacteria to mineralize oil sludge organic wastes.

Fabrication of visible-light response cadmium sulfide modified superhydrophobic surface for water resource remediation

Widespread concern has been attached to the frequent occurrence of pollution by oil slicks and water-soluble pollutants in recent years. The semiconductor photocatalysis is applied to sewage treatment owing to the advantages of energy-conserving and environmental protection. However, its application is limited by the defects of not solving oil slicks and the hard recyclability. In this paper, the high specific surface area and rod-shaped CdS were prepared using template and alkali-treated methods. Next, the alkylated SiO₂and alkali-treated CdS were deposited on pure fabric by physical deposition to prepare the multifunctional superhydrophobic fabric. The specific surface area and morphology of alkali-treated CdS were tested by BET specific surface area test and field emission scanning electron microscope. Besides, oil/water separation, water contact angle, and stability test experiments were performed to determine the superhydrophobic performance. Photocatalysis degradation efficiency and cycle degradation stability of multifunctional fabric were characterized by photocatalysis degradation Rh B experiment. Consequently, the alkali-treated CdS displays a high specific surface up to 343 m²g^-1. The multifunctional fabric presents excellent superhydrophobic performance with the water contact angle up to 155°. Meanwhile, the water contact angle of multifunctional fabric is always over 150° under various circumstances (acid-base corrosion, soaking time at 100 °C and frictional numbers), indicating that the multifunctional fabric has excellent superhydrophobic stability. Moreover, the fabric also exhibits outstanding photocatalysis performance (the degradation efficiency is 94% after 3 cycles). Our work provides a feasible method for addressing oil slicks on water surface and degrading water-soluble pollutants with extensive application prospects in water resource remediation.

Inexact inventory-theory-based optimization of oily waste management system in shoreline spill response

The oily waste generated from the cleanup operations during shoreline spill response can result in challenging environmental and socioeconomic problems. In this study, an inexact inventory-theory-based optimization model (ITOM) for oily waste management during shoreline spill response was developed to support the spill management team. The most appropriate facilities and optimal waste allocation scheme under uncertainty can be selected to achieve minimum total system cost. To satisfy the demand of oily waste treatment, these oily waste management facilities can be selectively opened depending on the situation. In the combination with the economic order quantity model of inventory theory, the developed model can provide the optimal solutions of batch size and order cycle for treatment facilities to minimize the inventory cost. A case study was used to demonstrate the application of ITOM. The obtained solutions include the facilities selection and waste allocation for waste collection and destocking stages under different risk levels. These solutions can provide a good guideline with managers to analyze the trade-offs between system cost and constraint-violation risks. The developed model has high application potential as a job-aid tool to manage the oily waste generated from oiled shoreline cleanup operations.

Biodegradation of crude oil by immobilized Exiguobacterium sp. AO-11 and shelf life evaluation

Exiguobacterium sp. AO-11 was immobilized on bio-cord at 10⁹ CFU g⁻¹ carrier for the removal of crude oil from marine environments. To prepare a ready-to-use bioremediation product, the shelf life of the immobilized cells was calculated. Approximately 90% of 0.25% (v/v) crude oil removal was achieved within 9 days when the starved state of immobilized cells was used. The oil removal activity of the immobilized cells was maintained in the presence of oil dispersant (89%) and at pH values of 7–9. Meanwhile, pH, oil concentration and salinity affected the oil removal efficacy. The immobilized cells could be reused for at least 5 cycles. The Arrhenius equation describing the relationship between the rate of reaction and temperature was validated as a useful model of the kinetics of retention of activity by an immobilized biocatalyst. It was estimated that the immobilized cells could be stored in a non-vacuum bag containing phosphate buffer (pH 7.0) at 30 °C for 39 days to retain the cells at 10⁷ CFU g⁻¹ carrier and more than 50% degradation activity. These results indicated the potential of using bio-cord-immobilized crude oil-degrading Exiguobacterium sp. AO-11 as a bioremediation product in a marine environment.

UV Stimulated Manganese Dioxide for the Persulfate Catalytic Degradation of Bisphenol A

One of the most commonly produced industrial chemicals worldwide, bisphenol A (BPA), is used as a precursor in plastics, resins, paints, and many other materials. It has been proved that BPA can cause long-term adverse effects on ecosystems and human health due to its toxicity as an endocrine disruptor. In this study, we developed an integrated MnO2/UV/persulfate (PS) process for use in BPA photocatalytic degradation from water and examined the reaction mechanisms, degradation pathways, and toxicity reduction. Comparative tests using MnO2, PS, UV, UV/MnO2, MnO2/PS, and UV/PS processes were conducted under the same conditions to investigate the mechanism of BPA catalytic degradation by the proposed MnO2/UV/PS process. The best performance was observed in the MnO2/UV/PS process in which BPA was completely removed in 30 min with a reduction rate of over 90% for total organic carbon after 2 h. This process also showed a stable removal efficiency with a large variation of pH levels (3.6 to 10.0). Kinetic analysis suggested that 1O2 and SO4•− played more critical roles than •OH for BPA degradation. Infrared spectra showed that UV irradiation could stimulate the generation of –OH groups on the MnO2 photocatalyst surface, facilitating the PS catalytic degradation of BPA in this process. The degradation pathways were further proposed in five steps, and thirteen intermediates were identified by gas chromatography-mass spectrometry. The acute toxicity was analyzed during the treatment, showing a slight increase (by 3.3%) in the first 30 min and then a decrease by four-fold over 2 h. These findings help elucidate the mechanism and pathways of BPA degradation and provide an effective PS catalytic strategy.

Occurrence and biodegradation of hydrocarbons at high salinities

Hypersaline environments are found around the world, above and below ground, and many are exposed to hydrocarbons on a continuous or a frequent basis. Some surface hypersaline environments are exposed to hydrocarbons because they have active petroleum seeps while others are exposed because of oil exploration and production, or nearby human activities. Many oil reservoirs overlie highly saline connate water, and some national oil reserves are stored in salt caverns. Surface hypersaline ecosystems contain consortia of halophilic and halotolerant microorganisms that decompose organic compounds including hydrocarbons, and subterranean ones are likely to contain the same. However, the rates and extents of hydrocarbon biodegradation are poorly understood in such ecosystems. Here we describe hypersaline environments potentially or likely to become contaminated with hydrocarbons, including perennial and transient environments above and below ground, and discuss what is known about the microbes degrading hydrocarbons and the extent of their activities. We also discuss what limits the microbial hydrocarbon degradation in hypersaline environments and whether there are opportunities for inhibiting (oil storage) or stimulating (oil spills) such biodegradation as the situation requires.

Specific enrichment of hydrocarbonclastic bacteria from diesel-amended soil on biochar particles

Biochar has been proposed as a suitable biostimulant for the remediation of hydrocarbon contamination, and also has the potential to act as a carrier for hydrocarbonoclastic microorganisms which could bioaugment endogenous microbial communities. However, the evidence regarding the biostimulatory effects of biochars on hydrocarbon bioremediation is somewhat equivocal, possibly due to variability of the physicochemical properties of biochar and soil across studies. Here, we use standard biochars with defined properties produced from softwood pellets (SWP) and rice husk (RH) at pyrolysis temperatures of 550 °C or 700 °C to test the effects of biochar amendment on microbial community composition and hydrocarbon degradation in soil microcosms contaminated with diesel oil. Combining this approach for the first time with specific analysis of microbial community composition using amplicon sequence variants (ASVs), we find that oil contamination causes extreme short-term loss of soil microbial diversity, and highly-specific selection of a limited set of genera defined by 13 ASVs. Biochar ameliorates the short-term loss of diversity, and in the longer term (9 weeks), changes community composition in a type-specific manner. The majority of the 13 selected ASVs are further enriched on biochar particles, although SWP biochars perform better than RH biochar in enrichment of putative hydrocarbonoclastic Aquabacterium spp. However, complete degradation of normal (n) alkanes from the aliphatic hydrocarbon fraction is prevented in the presence of biochar amendment, possibly due to their adsorption onto the char surface. Furthermore, we show that putative hydrocarbon degraders released from diesel-amended soil can subsequently be enriched to high levels on SWP biochar particles in growth medium supplemented with diesel oil as the sole carbon source; these include selected ASVs representing the genera Rhodococcus, Aquabacterium, and Cavicella. This work suggests that use of biochar pre-enriched with endogenous, conditionally-rare hydrocarbon degrading bacteria is a promising strategy for bioaugmentation of diesel-contaminated soils.

Investigation of halotolerant marine Staphylococcus sp. CO100, as a promising hydrocarbon-degrading and biosurfactant-producing bacterium, under saline conditions

A halotolerant strain CO100 of Staphylococcus sp. was isolated from contaminated sediments taken from the fishing harbour of Sfax, Tunisia, as an efficient hydrocarbonoclastic candidate. Strain CO100 exhibited a high capacity to break down almost 72% of the aliphatic hydrocarbons contained in crude oil (1%, v/v), used as the sole carbon and energy source, after 20 days of culture, at 100 g/l NaCl, 37 °C and 180 rpm. The isolate CO100 displayed also its ability to grow on phenanthrene, fluoranthene and pyrene (100 mg/l), at 100 g/l NaCl. Moreover, the isolate CO100 showed a notable aptitude to synthesize an efficient tensioactive agent namely BS-CO100, on low-value substrates including residual frying oil and expired milk powder, thus reducing the high cost of biosurfactant production. The ESI/MS analysis designated that BS-CO100 belonged to lipopeptide class, in particular lichenysin and iturine members. Critical micelle concentrations of BS-CO100 were varying between 65 and 750 mg/l, depending on of the purity of the biosurfactant and the used carbon sources. BS-CO100 showed a high steadiness against a wide spectrum of pH (4.3-12), temperature (4-121 °C) and salinity (0-300 g/l NaCl), supporting its powerful tensioactive properties under various environmental conditions. Likewise, BS-CO100 exhibited no cytotoxic effect toward human HEK293 cells, at concentrations within 125 and 1000 μg/ml. Furthermore, the biosurfactant BS-CO100 exhibited remarkable anti-adhesive and anti-biofilm activities, being able to avoid and disrupt the biofilm formation by certain pathogenic microorganisms. In addition, BS-CO100 was found to have more potential to remove hydrocarbons from contaminated soils, compared to some chemical surfactants. In light of these promising findings, strain CO100, as well as its biosurfactant, could be successfully used in different biotechnological applications including the bioremediation of oil-polluted areas, even under saline conditions.

The addition of biochar as a sustainable strategy for the remediation of PAH-contaminated sediments

The contamination of sediments by polycyclic aromatic hydrocarbons (PAHs) has been widely spread for years due to human activities, imposing the research and development of effective remediation technologies for achieving efficient treatment and reuse of sediments. In this context, the amendment of biochar in PAH-contaminated sediments has been lately proposed as an innovative and sustainable technology. This review provides detailed information about the mechanisms and impacts associated with the supplementation of biochar to sediments polluted by PAHs. The properties of biochar employed in these applications have been thoroughly examined. Sorption onto biochar is the main mechanism involved in PAH removal from sediments. Sorption efficiency can be significantly improved even in the presence of a low remediation time (i.e. 30 d) when a multi-PAH system is used and biochar is provided with a high dosage (i.e. by 5% in a mass ratio with the sediment) and a specific surface area of approximately 360 m² g^-1. The use of biochar results in a decrease (i.e. up to 20%) of the PAH degradation during bioaugmentation and phytoremediation of sediments, as a consequence of the reduction of PAH bioavailability and an increase of water and nutrient retention. In contrast, PAH degradation has been reported to increase up to 54% when nitrate is used as electron acceptor in low-temperature biochar-amended sediments. Finally, biochar is effective in co-application with Fe²⁺ for the persulfate degradation of PAHs (i.e. up to 80%), mainly when a high catalyst dose and an acidic pH are used.

Investigation into the oil removal from sand using a surface washing agent under different environmental conditions

Spilled oil frequently reaches the shorelines and affects coastal biota and communities. The application of surface washing agents is an important shoreline cleanup technique that can help remove stranded oil from substrate surfaces with the advantages of high removal efficiency, low toxicity, and strong economic viability. In this study, the investigation into the oil removal from contaminated sand using a surface washing agent under variable environmental conditions was conducted. A preliminary test was conducted to obtain the optimal combination of operating factors of surface washing agent-to-oil ratio (SOR) 2:1, mixing speed 150 rpm, and mixing time 30 min. The results of single-factor experiments showed that high temperature and humic acid concentration of flush water contributed to the performance of a surface washing agent, while salinity and kaolinite concentration could inhibit its performance. The factorial analysis revealed the main effects of temperature and salinity, and the interactive effects of temperature and salinity as well as salinity and humic acid concentration that were significant to the washing efficiency of the surface washing agent. In addition, the comprehensive assessment of a surface washing agent from the aspects of toxicity, detergency, dispersion properties, and field trials was conducted. The results have significant implications for future application of surface washing agents in the shoreline cleanup.