A slurry electrode integrated with membrane electrolysis for high-performance acetate production in microbial electrosynthesis

H2 mediated mixed culture microbial electrosynthesis for high titer acetate production from CO2

Microbial electrosynthesis (MES) converts CO2 into value-added products such as volatile fatty acids (VFAs) with minimal energy use, but low production titer has limited scale-up and commercialization. Mediated electron transfer via H2 on the MES cathode has shown a higher conversion rate than the direct biofilm-based approach, as it is tunable via cathode potential control and accelerates electrosynthesis from CO2. Here we report high acetate titers can be achieved via improved in situ H2 supply by nickel foam decorated carbon felt cathode in mixed community MES systems. Acetate concentration of 12.5 g L-1 was observed in 14 days with nickel-carbon cathode at a poised potential of -0.89 V (vs. standard hydrogen electrode, SHE), which was much higher than cathodes using stainless steel (5.2 g L-1) or carbon felt alone (1.7 g L-1) with the same projected surface area. A higher acetate concentration of 16.0 g L-1 in the cathode was achieved over long-term operation for 32 days, but crossover was observed in batch operation, as additional acetate (5.8 g L-1) was also found in the abiotic anode chamber. We observed the low Faradaic efficiencies in acetate production, attributed to partial H2 utilization for electrosynthesis. The selective acetate production with high titer demonstrated in this study shows the H2-mediated electron transfer with common cathode materials carries good promise in MES development.

Carbon dioxide reduction to high-value chemicals in microbial electrosynthesis system: Biological conversion and regulation strategies

Large emissions of atmospheric carbon dioxide (CO2) are causing climatic and environmental problems. It is crucial to capture and utilize the excess CO2 through diverse methods, among which the microbial electrosynthesis (MES) system has become an attractive and promising technology to mitigate greenhouse effects while reducing CO2 to high-value chemicals. However, the biological conversion and metabolic pathways through microbial catalysis have not been clearly elucidated. This review first introduces the main acetogenic bacteria for CO2 reduction and extracellular electron transfer mechanisms in MES. It then intensively analyzes the CO2 bioconversion pathways and carbon chain elongation processes in MES, together with energy supply and utilization. The factors affecting MES performance, including physical, chemical, and biological aspects, are summarized, and the strategies to promote and regulate bioconversion in MES are explored. Finally, challenges and perspectives concerning microbial electrochemical carbon sequestration are proposed, and suggestions for future research are also provided. This review provides theoretical foundation and technical support for further development and industrial application of MES for CO2 reduction.

Electrocatalytic Reactions for Converting CO2 to Value-Added Products: Recent Progress and Emerging Trends

Carbon dioxide (CO₂) emissions are an important environmental issue that causes greenhouse and climate change effects on the earth. Nowadays, CO₂ has various conversion methods to be a potential carbon resource, such as photocatalytic, electrocatalytic, and photo-electrocatalytic. CO₂ conversion into value-added products has many advantages, including facile control of the reaction rate by adjusting the applied voltage and minimal environmental pollution. The development of efficient electrocatalysts and improving their viability with appropriate reactor designs is essential for the commercialization of this environmentally friendly method. In addition, microbial electrosynthesis which utilizes an electroactive bio-film electrode as a catalyst can be considered as another option to reduce CO₂. This review highlights the methods which can contribute to the increase in efficiency of carbon dioxide reduction (CO₂R) processes through electrode structure with the introduction of various electrolytes such as ionic liquid, sulfate, and bicarbonate electrolytes, with the control of pH and with the control of the operating pressure and temperature of the electrolyzer. It also presents the research status, a fundamental understanding of carbon dioxide reduction reaction (CO₂RR) mechanisms, the development of electrochemical CO₂R technologies, and challenges and opportunities for future research.

Microbial electrosynthesis: carbonaceous electrode materials for CO2 conversion

Microbial electrosynthesis (MES) is a sustainable approach to address greenhouse gas (GHG) emissions using anthropogenic carbon dioxide (CO₂) as a building block to create clean fuels and highly valuable chemicals. The efficiency of MES-based CO₂ conversion is closely related to the performance of electrode material and, in particular, the cathode for which carbonaceous materials are frequently used. Compared to expensive metal electrodes, carbonaceous materials are biocompatible with a high specific surface area, wide range of possible morphologies, and excellent chemical stability, and their use can maximize the growth of bacteria and enhance electron transfer rates. Examples include MES cathodes based on carbon nanotubes, graphene, graphene oxide, graphite, graphite felt, graphitic carbon nitride (g-C₃N₄), activated carbon, carbon felt, carbon dots, carbon fibers, carbon brushes, carbon cloth, reticulated vitreous carbon foam, MXenes, and biochar. Herein, we review the state-of-the-art MES, including thermodynamic and kinetic processes that underpin MES-based CO₂ conversion, as well as the impact of reactor type and configuration, selection of biocompatible electrolytes, product selectivity, and the use of novel methods for stimulating biomass accumulation. Specific emphasis is placed on carbonaceous electrode materials, their 3D bioprinting and surface features, and the use of waste-derived carbon or biochar as an outstanding material for further improving the environmental conditions of CO₂ conversion using carbon-hungry microbes and as a step toward the circular economy. MES would be an outstanding technique to develop rocket fuels and bioderived products using CO₂ in the atmosphere for the Mars mission.

Metal nanoparticles increased the lag period and shaped the microbial community in slurry-electrode microbial electrosynthesis

Concerns about energy crisis and CO₂ emission have motivated the development of microbial electrosynthesis (MES); recent studies have showed the potential of novel slurry-electrode MES. In this study, the effect of nonprecious metal nanoparticles (NPs) on the performance of slurry-electrode MES was systematically evaluated in terms of chemical production, physicochemical properties, electrochemical characterization, and microbial community. Ni and Cu NPs increased the lag period from 6 to 15 days for acetate production, while Mo NPs showed no apparent effect. However, these metal NPs slightly affected the final total acetate production (ca. 10 g L^-1), Faradic efficiency (ca. 50%), net water flux across the anion exchange membrane (ca. 6 mL d^-1), or electrochemical characterization of catholyte. BRH-c20a was enriched as the dominated microbe (>48%), and its relative abundance was largely affected by the addition of metal NPs. This study demonstrates that metal NPs affect the performance of biocathodes, mainly by shaping the microbial community.

Cathodic biofilms - A prerequisite for microbial electrosynthesis

Cathodic biofilms have an important role in CO₂ bio-reduction to carboxylic acids and biofuels in microbial electrosynthesis (MES) cells. However, robust and resilient electroactive biofilms for an efficient CO₂ conversion are difficult to achieve. In this review, the fundamentals of cathodic biofilm formation, including energy conservation, electron transfer and development of catalytic biofilms, are presented. In addition, strategies for improving cathodic biofilm formation, such as the selection of electrode and carrier materials, cell design and operational conditions, are described. The knowledge gaps are individuated, and possible solutions are proposed to achieve stable and productive biofilms in MES cathodes.

Overview of electroactive microorganisms and electron transfer mechanisms in microbial electrochemistry

Electroactive microorganisms acting as microbial electrocatalysts have intrinsic metabolisms that mediate a redox potential difference between solid electrodes and microbes, leading to spontaneous electron transfer to the electrode (exo-electron transfer) or electron uptake from the electrode (endo-electron transfer). These microbes biochemically convert various organic and/or inorganic compounds to electricity and/or biochemicals in bioelectrochemical systems (BESs) such as microbial fuel cells (MFCs) and microbial electrosynthesis cells (MECs). For the past two decades, intense studies have converged to clarify electron transfer mechanisms of electroactive microbes in BESs, which thereby have led to improved bioelectrochemical performance. Also, many novel exoelectrogenic eukaryotes as well as prokaryotes with electroactive properties are being continuously discovered. This review presents an overview of electroactive microorganisms (bacteria, microalgae and fungi) and their exo- and endo-electron transfer mechanisms in BESs for optimizing and advancing bioelectrochemical techniques.

Tuning of Electrode Surface for Enhanced Bacterial Adhesion and Reactions: A Review on Recent Approaches

The study of bacterial adhesion and its consequences has great significance in different fields such as marine science, renewable energy sectors, soil and plant ecology, food industry, and the biomedical field. Generally, the adverse effects of microbial surface interactions have attained wide visibility. However, herein, we present distinct approaches to highlight the beneficial aspects of microbial surface interactions for various applications rather than deal with the conventional negative aspects or prevention strategies. The surface microbial reactions can be tuned for useful biochemical or bio-electrochemical applications, which are otherwise unattainable through conventional routes. In this context, the present review is a comprehensive approach to highlight the basic principles and signature parameters that are responsible for the useful microbial-electrode interactions. It also proposes various surface tuning strategies, which are useful for tuning the electrode characteristics particularly suitable for the enhanced bacterial adhesion and reactions. The tuning of surface characteristics of electrodes is discussed with a special reference to the Microbial Fuel Cell as an example.

Rechargeable microbial fuel cell based on bidirectional extracellular electron transfer

Rechargeable microbial electrochemical systems can be used as renewable energy storage systems or as potable bioelectronics devices. In this study, a bioelectrode capable of bidirectional extracellular electron transfer was firstly introduced to construct the rechargeable microbial fuel cell (MFC). The performance of rechargeable MFC was enhanced with the increase of charge/discharge cycles, and a maximum energy efficiency of 4.5 ± 0.2% and Coulombic efficiency of 29.4 ± 4.1% were obtained. H₂ was the main charge carrier, while the accumulated acetate was only about 10 mg L^-1. The charge time under constant current mode largely affected the energy recovery. A decreased abundance of Mycobacteria, Geobacter, and Azospirillum, accompanied by an increase of Azonexus and Rhodococcus was observed in the rechargeable MFC, compared to control tests fueled with acetate. This study demonstrates the potential of bioelectrode for energy storage and recovery.

A microbial electrochemical hybrid system for simultaneous sludge treatment, acid production, and desalination

Excess sludge production from wastewater treatment plants has significantly increased, and sludge disposal has become a serious social and environmental problem. In this study, we constructed a microbial electrochemical hybrid system (MEHS) for simultaneous electricity generation, acid and alkali production, desalination, alkali pretreatment, and degradation of sludge. The alkaline solution generated in the MEHS was used for in situ sludge pretreatment. Owing to the efficiency in alkali pretreatment, a higher sludge degradation efficiency was obtained by the MEHS (Total chemical oxygen demand (TCOD) removal efficiency of 57.2%) than by the SMFC (TCOD removal efficiency of 51.7%). Moreover, the MEHS (0.165C) could recover more electricity from the sludge than a traditional single-chamber microbial fuel cell (SMFC, 0.133C). Additionally, the MEHS exhibited excellent performance in desalination (> 50%) and acid production. The system developed in this study provides a new solution for sludge degradation and multifunctional utilization.

An insight into the bioelectrochemical photoreduction of CO2 to value-added chemicals

Goal of sustainable carbon neutral economy can be achieved by designing an efficient CO₂ reduction system to generate biofuels, in particular, by mimicking the mechanism of natural photosynthesis using semiconducting nanomaterials interfaced with electroactive bacteria (EAB) in a photosynthetic microbial electrosynthesis (PMES) system. This review paper presents an overview of the recent advancements in the biohybrid photoanode and photocathode materials. We discuss the reaction mechanism observed at photoanode and photocathode to enhance our understanding on the solar driven MES. We extend the discussion by showcasing the potential activity of EABs toward high selectivity and production rates for desirable products by manipulating their genomic sequence. Additionally, the critical challenges associated in scaling up the PMES system including the strategies for diminution of reactive oxygen species, low solubility of CO₂ in the typical electrolytes, low selectivity of product species are presented along with the suggestions of alternative strategies to achieve economically viable generation of (bio)commodities.