An efficient strategy for the enhancement of adsorptivity of microporous carbons against gaseous formaldehyde: Surface modification with aminosilane adducts

Short-term storability of volatile organic compounds in bag sampling systems under ambient conditions

Although bag sampling is a common quantification tool for volatile organic compounds (VOCs), it can serve as a major source of experimental bias, when storing even over a short duration (<24 h). To learn more about the reliability of the bag sampling method, the temporal stability of 27 VOCs (classified into five groups (i.e., aldehydes, nonpolar aromatic hydrocarbons, aliphatic carboxylic acids, phenol and methylphenols, and miscellaneous odorants) is assessed using poly-ester aluminum (PEA) bags at five intervals over a day (0.17, 1, 2, 6, and 24 h). In terms of reproducibility (e.g., relative standard error [RSEt, %]), nonpolar aromatic hydrocarbons (BTXS) exhibit the highest consistency (e.g., average RSE <1.55%). Considerable loss of VOCs is observed in the preparation of gaseous standards from a liquid phase standard when assessed by gas/liquid (G/L) ratio. Further, VOCs with lower molecular weights (e.g., propionaldehyde: 77%-94.4%) and branched molecular structures (e.g., isovaleraldehyde: 67.2%-78.9%) tend to have high G/L ratio (e.g., relative to valeraldehyde: 55.1%-66%). The overall relative recovery (RR; %) values of VOCs indicate an exponential decrease over 24 h. BTXS maintain fairly good RR values (above 94.3% at all intervals), possibly due to the nonpolar structure with uniform distribution of π electrons. In contrast, indole and skatole show the least preservation after 24 h (e.g., RR4 values of 10.9% and 24.6%, respectively) due to their highly reactive characteristics. The storability of VOCs appears to be affected by a number of variables (e.g., molecular weight, presence of ethyl branch, and time: e.g., R2 > 0.9). The results of this study offer valuable guidelines for the accurate quantification of VOC levels in air.

Tuning strategies of MIL metal organic frameworks for adsorptive removal of formaldehyde in air

Materials Institute Lavoisier (MIL) metal organic frameworks (MOFs) are known for their potential to adsorb gaseous organic pollutants. This study explores the synergistic effects between the selection of central metals (e.g., titanium, iron, and aluminum) and the incorporation of -NH2 groups in terms of adsorption efficiency against gaseous formaldehyde (FA). A group of the pristine MIL MOFs is synthesized using three different metals (i.e., titanium, iron, and aluminum) and terephthalic acid along with their NH2 derivatives using 2-aminoterephthalic acid. Among the pristine forms, MIL-125(Ti) achieves the highest FA adsorption capacity (Q) of 26.96 mg g-1 and a partition coefficient (PC) of 0.0898 mol kg-1 Pa-1. Further, amination significantly improves the FA adsorption potential of NH2-MIL-125(Ti) with a Q value of 91.22 mg g-1 (PC = 0.3038 mol kg-1 Pa-1). In situ diffuse reflectance infrared Fourier-transform spectroscopy reveals that the FA adsorption of plain MILs should be governed primarily by physisorption. In contrast, FA adsorption of NH2-MILs appears to be regulated by both physisorption and chemisorption, while the latter being affected mainly through FA-NH2 interactions (Schiff base reactions). These findings provide valuable insights into the utility of aminated MIL sorbents, possibly toward the efficient management of indoor air quality.

The effects of metal-oxide content in MnO2-activated carbon composites on reactive adsorption and catalytic oxidation of formaldehyde and toluene in air

The deterioration in air quality caused by volatile organic compounds (VOCs) has become an important environmental issue. Here, activated carbon (AC) composites with manganese oxide (MnO2: 1 % to 50 %) are synthesized as MAC for the removal of formaldehyde (FA) and toluene in air through a combination of reactive adsorption and catalytic oxidation (RACO) at room temperature (RT). The best-performing composite (MAC-20: 20 % of MnO2) exhibits a 10 % breakthrough volume (BTV10%) of FA and toluene at 41.2 and 377 L g-1, respectively while realizing complete oxidation of FA and toluene into carbon dioxide (CO2) at 100 °C and 275 °C, respectively. The reaction kinetic rates (r) for 10 % removal efficiency of FA and toluene (XFA or T) at RT are estimated as 9.82E-02 and 3.20E-02 mmol g-1 h-1, respectively. The high performance of MAC-20 can be attributed to its enriched adsorption capacity of oxygen vacancy (OV) and the presence of adsorbed oxygen (OA), as shown by an Mn3+/Mn4+ ratio of 0.729 and an OA/lattice‑oxygen (OL) ratio of 1.50. The results of this study highlight the interactive roles of oxygen abundance and temperature in the generation of distinctive oxidation patterns for FA in reference to toluene. This study is expected to offer practical guidance for the implementation of RACO against diverse VOCs for efficient management of air quality.

The relative dominance of surface oxygen content over pore properties in controlling adsorption and retrograde behavior of gaseous toluene over microporous carbon

The adsorption potential of activated carbon (AC) derived from macadamia nut shells (product code of Procarb-900: namely, AC-P) has been investigated using gaseous toluene as the target pollutant. The powder AC-P with high-microporosity (96%) and oxygen content (5.62%) exhibited very high adsorption capacity (214 mg·g-1) and partition coefficient (PC: 25 mol·kg-1·Pa-1) against 100 ppm (10 Pa) toluene at 99% breakthrough levels (1 atm dry N2). The factors governing toluene adsorption were explored with respect to the key variables such as surface functional groups, pore size distribution, sorbent bed mass (50, 100, and 150 mg), and particle size (i.e., 0.212-0.6 mm (powder AC: PAC)) vs. 0.6-2.36 mm (granular AC: GAC)). Accordingly, the adsorption process was physical, mainly due to the non-polar interactions (i.e., π-π interactions) between the adsorbent and adsorbate molecules. The high affinity of AC-P at low breakthrough levels was obtained through a combination of smaller particle size (PAC) and larger adsorbent mass (i.e., 150 mg) with the appearance of a very pronounced retrograde phenomenon (e.g., at < 1% breakthrough level). As such, toluene adsorption appeared to be affected more sensitively by particle size and adsorbent mass (especially at low breakthrough levels) than by high microporosity. Most importantly, the oxygen content of AC emerges as one of the key factors governing the maximum capacity, as the changes in pore volume are not crucial to explain the observed adsorption patterns of toluene.

Doping of porous carbons with sulfur and nitrogen markedly enhances their surface activity for formaldehyde removal

The surfaces of phosphoric acid activated carbon, referred to as CG, and steam activated one, referred to as SX, were modified through an introduction of S- and N- groups originated from thiourea. The prepared samples were used for formaldehyde removal at room temperature. Heating at 450, 600 and 950 °C altered both surface chemistry and porosity. The extents of these modifications depended on the type of carbon. Using thiourea as the modifier resulted in an incorporation of significant amounts of nitrogen and sulfur to the carbon matrices. Their speciation depended on the heat treatment conditions. The activity of samples heated at 450 °C was governed by amine groups of thiourea retained on the surface. A further heat treatment converted gradually amine nitrogen into pyridines/pyrroles and quaternary nitrogen, shifting the adsorption mechanism to rather specific interactions than a direct chemical reactivity. Carbons with few times less nitrogen than in their amine-modified counterparts, but in quaternary form and with the small amount of sulfur in thiophenic configurations, regardless the origin, worked as very efficient adsorbents of HCHO. Due to the modification of the carbon matrix electronic structure, resulting in a positive charge on carbon atoms in the vicinity of the heteroatoms incorporated to carbon rings, the density of specific adsorption centers on the surface in larger pores was significantly higher than that in ultramicropores. This markedly contributed to efficient utilization of pores/surface, where heteroatom can exist and where otherwise the dispersive adsorptions forces would be weak, for HCHO removal at ambient conditions.

Diaminopropane-appended activated carbons for the adsorptive removal of gaseous formaldehyde using a portable indoor air purification unit

It is of significant practical interest to develop high-performance air purifier (AP) for removing carcinogenic volatile organic compounds present ubiquitously in indoor air (e.g., formaldehyde (FA)). In this regard, a portable AP system was designed by loading honeycomb ceramic filters with diaminopropane (DAP)-appended activated carbon (AC). The maximum removal efficiencies (REs) of AP loaded with 10, 20, 30, and 50 %-DAP/AC were 26.2, 28, 88.3, and 89.4 %, respectively, against 5 ppm FA (at 160 L min-1). Hence, the 30 % DAP unit was used mainly in this work. The removal efficiency of 30 %-DAP/AC (160 L min-1), when tested against 2 ppm FA, decreased from 90.3 to 73.2 % with an increase in relative humidity from 0 to 60 %. The performance of the AP unit, when assessed kinetically in terms of the clean air delivery rate (CADR), reached as high as 10.2 L min-1 at the flow rate of 160 L min-1. Isotherm analysis further demonstrated the complex multilayered adsorption behavior of FA. Based on the density functional theory (DFT) simulation, the superiority of DAP/AC for FA adsorption can be attributed to the synergy of covalent (chemisorption) and non-covalent (pore filling and film diffusion) interactions.

Luminescence of carbon quantum dots and their application in biochemistry

Similar to fullerenes, carbon nanotubes and graphene, carbon dots (CDs) are causing a lot of research work in their own right. CDs are a type of surface-passivated quantum dot that contain carbon atoms. Their distinctive characteristics, such as luminescent emission that varies with size and wavelength, resistance to photobleaching, easy biological binding, lack of toxicity, and economical production without the need for intricate synthetic processes, have led to a noteworthy surge in attention within the research community. Different techniques can be utilized to create these CDs, spanning from basic candle burning to laser ablation. This review article delves into the principles of fluorescence technology, providing insights into how different synthesis methods of quantum dots impact their luminescent properties. Additionally, it highlights the latest applications of quantum dots in catalysis and biomedical fields, with special emphasis on the current status of luminescent properties in biology and chemistry. Towards the end, the article discusses the limitations of quantum dots in current practical applications, pointing out that CDs hold promising potential for future applications.

Self-Assembled Construction of Robust and Super Elastic Graphene Aerogel for High-Efficient Formaldehyde Removal and Multifunctional Application

Simultaneously achieving exceptional mechanical strength and resilience of graphene aerogel (GA) remains a challenge, while GA is an ideal candidate for formaldehyde removal. Herein, flexible polyethyleneimine (PEI) is grafted chemically onto carbon nanotube (CNT) surface, and CNT-PEI@reduced GA (rGA) is fabricated via hydrothermal self-assembly, pre-frozen, and hydrazine reduction process. Introducing CNT-PEI contributes to well-interconnected/robust 3D network construction by connecting reduced graphene oxide (rGO) nanosheets through enhancing cross-linking, while entangled CNT-PEI is intercalated into rGO layers to avoid serious restacking of sheets, producing larger surface area and more formaldehyde adsorption sites. Ultralight CNT-PEI@rGA exhibits extreme high strength (276.37 kPa), reversible compressibility at 90% strain, and structural stability, while FA adsorption capacity reached 568.41 mg g^-1 , ≈3.28 times of rGA, derivable from synergistic chemical-physical adsorption effect. Furthermore, CNT-PEI@rGA is ground into powder for first preparing polyoxymethylene (POM)/CNT-PEI@rGA composite, while formaldehyde emission amount is 69.63%/73.96% lower than that of POM at 60/230 °C. Moreover, CNT-PEI@rGA presents outstanding piezoresistive-sensing and thermal insulation properties, exhibiting high strain sensitivity, wide strain detection range, and long-term durability.

Low-temperature oxidative removal of gaseous formaldehyde by an eggshell waste supported silver-manganese dioxide bimetallic catalyst with ultralow noble metal content

Under dark/low temperature (DLT) conditions, the oxidative removal of gaseous formaldehyde (FA) was studied using eggshell waste supported silver (Ag)-manganese dioxide (MnO₂) bimetallic catalysts. To assess the synergistic effects between the two different metals, 0.03%-Ag-(0.5-5%)-MnO₂/Eggshell catalysts were prepared and employed for DLT-oxidation of FA. The steady-state FA oxidation reaction rate (mmol g^-1 h^-1), when measured using 100 ppm FA at 80 °C (gas hourly space velocity (GHSV) of 5308 h^-1), varied as follows: Ag-1.5%-MnO₂/Eggshell-R (9.4) > Ag-3%-MnO₂/Eggshell-R (8.1) > Ag-1.5%-MnO₂/Eggshell (7.5) > Ag-5%-MnO₂/Eggshell-R (7.2) > Ag-1.5%-MnO₂/CaCO₃-R (6.8) > MnO₂-R (6) > Ag-0.5%-MnO₂/Eggshell-R (3.2) > Ag/Eggshell-R (2.6). (Here, 'R' denotes hydrogen-based thermochemical reduction pretreatment.) The temperature required for 90% FA conversion (T₉₀) at the same GHSV exhibited a contrary ordering: Ag/Eggshell-R (175 °C) > Ag-0.5%-MnO₂/Eggshell-R (123 °C) > Ag-5%-MnO₂/Eggshell-R (113 °C) > MnO₂-R (99 °C) > Ag-1.5%-MnO₂/Eggshell (96 °C) > Ag-3%-MnO₂/Eggshell-R (93 °C) > Ag-1.5%-MnO₂/Eggshell-R (77 °C). The eggshell catalyst outperformed the ones made of commercial calcium carbonate due to the presence of defects in the former. The MnO₂ co-catalyst enhances the catalytic activities through the capture and activation of atmospheric oxygen (O₂) with rapid catalytic regeneration. Also, MnO₂ favorably captures the hydrogen of the adsorbed FA molecules to make the oxidation pathway thermodynamically more favorable.

Proof of concept for CUK family metal-organic frameworks as environmentally-friendly adsorbents for benzene vapor

The utility of metal-organic frameworks (MOFs) such as the CUK family (CUK - Cambridge University-KRICT) has been explored intensively for adsorption/separation of airborne volatile organic compounds (VOCs). In this article, three M-CUK analogs (M = Mg, Co, or Ni) were synthesized hydrothermally under similar conditions to assess the effects of their isostructural properties and metal centers on adsorption of benzene vapor (0.05-1 Pa). A list of performance metrics (e.g., breakthrough volume (BTV) and partition coefficient (PC)) were used to assess the role of the metal type (in M-CUK-1s) in the adsorption of VOCs. Specifically, Co-CUK-1 (average pore size of 8.98 nm) showed 2-3 times greater performance (e.g., in terms of 10% BTV (2012 L atm g^-1) and PC (6 mol kg^-1 Pa^-1)) over other analogs when exposed up to 0.05 Pa benzene vapor. The superiority of mesoporous Co-CUK-1 (e.g., enhanced adsorption diffusion mechanism through favorable metal-π and π- π interactions) can be attributed to the presence of cobalt metal centers (e.g., in reference to Mg- or Ni-CUK-1).

A strategy for the enhancement of trapping efficiency of gaseous benzene on activated carbon (AC) through modification of their surface functionalities

Facile modification is a common, but effective, option to improve the uptake removal capacity of of activated carbon (AC) against diverse target volatile organic compounds (VOCs; e.g., benzene) in gaseous streams. To help design the routes for such modification, this research built strategies to generate three types of modified ACs by incorporating amine/sulfur/amino-silane groups under solvothermal or microwave (MW) thermal conditions. The adsorption performance has been tested using a total of six types of AC sorbents (three modified + three pristine forms) for the capture of 1 Pa benzene (1 atm and 298 K). The obtained results are evaluated in relation to their textural properties and surface functionalities. Accordingly, the enhancement of AC surface basicity (e.g., point of zero charge (PZC) = 10.25), attained via the silylation process, is accompanied by the reduced adsorption of benzene (a weak base). In contrast, ACs amended with amine/sulfur (electron-donating) groups using the MW technique are found to acquire high surface acidity (PZC of 5.99-6.05) to exhibit significantly improved benzene capturing capability (relative to all others). Their uplifted performance is demonstrated in terms of key performance metrics such as breakthrough volume (BTV10%: 163 → 443 L g^-1), adsorption capacity (Q10%: 4.82 → 13.6 mg g^-1), and partition coefficient (PC10%: 0.516 → 1.67 mol kg^-1 Pa^-1). Based on the kinetic analysis, the overall adsorption process is found to be governed by pore diffusion as the main rate-determining step, along with surface interaction mechanisms. The results of this research clearly support the critical role of surface chemistry of AC adsorbents and their textural properties in upgrading air/gas purification systems.